library ieee; use ieee.std_logic_1164.all; use ieee.numeric_std.all; library work; use work.common.all; entity cr_file is port( clk : in std_logic; d_in : in Decode2ToCrFileType; d_out : out CrFileToDecode2Type; w_in : in WritebackToCrFileType ); end entity cr_file; architecture behaviour of cr_file is signal crs : std_ulogic_vector(31 downto 0) := (others => '0'); signal crs_updated : std_ulogic_vector(31 downto 0) := (others => '0'); begin cr_create_0: process(all) variable hi, lo : integer := 0; variable cr_tmp : std_ulogic_vector(31 downto 0) := (others => '0'); begin cr_tmp := crs; for i in 0 to 7 loop if w_in.write_cr_mask(i) = '1' then lo := i*4; hi := lo + 3; cr_tmp(hi downto lo) := w_in.write_cr_data(hi downto lo); end if; end loop; crs_updated <= cr_tmp; end process; -- synchronous writes cr_write_0: process(clk) begin if rising_edge(clk) then if w_in.write_cr_enable = '1' then report "Writing " & to_hstring(w_in.write_cr_data) & " to CR mask " & to_hstring(w_in.write_cr_mask); end if; crs <= crs_updated; end if; end process; -- asynchronous reads cr_read_0: process(all) begin -- just return the entire CR to make mfcrf easier for now if d_in.read = '1' then report "Reading CR " & to_hstring(crs_updated); end if; d_out.read_cr_data <= crs; end process; end architecture behaviour;