matthew1kalasky3
/
microwatt
forked from cores/microwatt
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
1,100 Commits
31 Branches
0 Tags
65 MiB
master
fpu-init
loadstore-init
core_debug-init
icache-unused-sig
icache-insn-u-state
dcache-unused-sig
unused-sig
divider-init
loadstore-pmu-init
icache-pmu-events
fpu-typo
less-fpga-init
caravel-mpw6-20220530
caravel-mpw5-20220323
caravel-mpw5-20220322
alt-reset-address
log2ceil-issue
fpu-constant
asic-3
boxarty-20211011
icbi-issue
orange-crab-freq
dcache-nc-fix
remove-potato-uart
cache-tlb-parameters-2
caravel-20210114
caravel-20210105
jtag-port-2
jtag-port
nia-debug
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from '606359cce3'
${ noResults }
Commit Graph

2 Commits (606359cce35f4ba28d58eb53bbde09f3c117c672)

Author SHA1 Message Date
Paul Mackerras ca4eb46aea Make wishbone addresses be in units of doublewords or words 
This makes the 64-bit wishbone buses have the address expressed in
units of doublewords (64 bits), and similarly for the 32-bit buses the
address is in units of words (32 bits).  This is to comply with the
wishbone spec.  Previously the addresses on the wishbone buses were in
units of bytes regardless of the bus data width, which is not correct
and caused problems with interfacing with externally-generated logic.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
 3 years ago
Benjamin Herrenschmidt dbb137437c acorn: Add support for the Acorn CLE 215+ 
This is a NiteFury based PCIe M2 form-factor board originally
used for mining. It contains a speed grade 2 Artix 7 200T,
1GB of DDR3 and 32MB of flash.

The serial port is routed to pin 2 (RX) and 3 (TX) of the P2
connector (pin 1 is GND).

Note: Only 16MB of flash is currently usable until code is added
to configure the flash controller to use 4-bytes address commands
on that part.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
 4 years ago