Compare commits

...

2 Commits

Author SHA1 Message Date
Anton Blanchard ceb15d3ca8 Hack to test under verilator 3 years ago
Michael Neuling 376ad8da3d boxarty rebased
Build with
  fusesoc run --target=arty_a7-100 microwatt --memory_size=0 --no_bram --use_litesdcard --has_lpc
3 years ago

@ -205,7 +205,7 @@ microwatt.v: $(synth_files) $(RAM_INIT_FILE)
$(YOSYS) -m $(GHDLSYNTH) -p "ghdl --std=08 --no-formal $(GHDL_IMAGE_GENERICS) $(synth_files) -e toplevel; write_verilog $@"

microwatt-verilator: microwatt.v verilator/microwatt-verilator.cpp verilator/uart-verilator.c
$(VERILATOR) $(VERILATOR_FLAGS) -CFLAGS "$(VERILATOR_CFLAGS) -DCLK_FREQUENCY=$(CLK_FREQUENCY)" -Iuart16550 --assert --cc --exe --build $^ -o $@ -top-module toplevel
$(VERILATOR) $(VERILATOR_FLAGS) -CFLAGS "$(VERILATOR_CFLAGS) -DCLK_FREQUENCY=$(CLK_FREQUENCY)" -Iuart16550 --assert --cc --exe --build $^ -o $@ -top-module toplevel lpc/lpc.v -Ilpc
@cp -f obj_dir/microwatt-verilator microwatt-verilator

microwatt_out.config: microwatt.json $(LPF)

@ -80,14 +80,14 @@ set_property IOB true [get_cells -hierarchical -filter {NAME =~*.litesdcard/sdca
# PMOD header JB (high-speed, no protection resisters)
################################################################################

#set_property -dict { PACKAGE_PIN E15 IOSTANDARD LVCMOS33 } [get_ports { pmod_jb_1 }];
#set_property -dict { PACKAGE_PIN E16 IOSTANDARD LVCMOS33 } [get_ports { pmod_jb_2 }];
#set_property -dict { PACKAGE_PIN D15 IOSTANDARD LVCMOS33 } [get_ports { pmod_jb_3 }];
#set_property -dict { PACKAGE_PIN C15 IOSTANDARD LVCMOS33 } [get_ports { pmod_jb_4 }];
#set_property -dict { PACKAGE_PIN J17 IOSTANDARD LVCMOS33 } [get_ports { pmod_jb_7 }];
#set_property -dict { PACKAGE_PIN J18 IOSTANDARD LVCMOS33 } [get_ports { pmod_jb_8 }];
#set_property -dict { PACKAGE_PIN K15 IOSTANDARD LVCMOS33 } [get_ports { pmod_jb_9 }];
#set_property -dict { PACKAGE_PIN J15 IOSTANDARD LVCMOS33 } [get_ports { pmod_jb_10 }];
set_property -dict { PACKAGE_PIN E15 IOSTANDARD LVCMOS33 } [get_ports { pmod_jb[1] }];
set_property -dict { PACKAGE_PIN E16 IOSTANDARD LVCMOS33 } [get_ports { pmod_jb[2] }];
set_property -dict { PACKAGE_PIN D15 IOSTANDARD LVCMOS33 PULLUP TRUE } [get_ports { pmod_jb[3] }];
set_property -dict { PACKAGE_PIN C15 IOSTANDARD LVCMOS33 PULLDOWN TRUE } [get_ports { shield_io[6] }];
set_property -dict { PACKAGE_PIN J17 IOSTANDARD LVCMOS33 PULLUP TRUE } [get_ports { pmod_jb[7] }];
set_property -dict { PACKAGE_PIN J18 IOSTANDARD LVCMOS33 PULLDOWN TRUE } [get_ports { shield_io[7] }];
set_property -dict { PACKAGE_PIN K15 IOSTANDARD LVCMOS33 } [get_ports { pmod_jb[9] }];
set_property -dict { PACKAGE_PIN J15 IOSTANDARD LVCMOS33 } [get_ports { pmod_jb[10] }];

# connection to Digilent PmodSD on JB
#set_property -dict { PACKAGE_PIN E15 IOSTANDARD LVCMOS33 SLEW FAST PULLUP TRUE } [get_ports { sdcard_data[3] }];
@ -103,14 +103,14 @@ set_property IOB true [get_cells -hierarchical -filter {NAME =~*.litesdcard/sdca
# PMOD header JC (high-speed, no protection resisters)
################################################################################

#set_property -dict { PACKAGE_PIN U12 IOSTANDARD LVCMOS33 } [get_ports { pmod_jc_1 }];
#set_property -dict { PACKAGE_PIN V12 IOSTANDARD LVCMOS33 } [get_ports { pmod_jc_2 }];
#set_property -dict { PACKAGE_PIN V10 IOSTANDARD LVCMOS33 } [get_ports { pmod_jc_3 }];
#set_property -dict { PACKAGE_PIN V11 IOSTANDARD LVCMOS33 } [get_ports { pmod_jc_4 }];
#set_property -dict { PACKAGE_PIN U14 IOSTANDARD LVCMOS33 } [get_ports { pmod_jc_7 }];
#set_property -dict { PACKAGE_PIN V14 IOSTANDARD LVCMOS33 } [get_ports { pmod_jc_8 }];
#set_property -dict { PACKAGE_PIN T13 IOSTANDARD LVCMOS33 } [get_ports { pmod_jc_9 }];
#set_property -dict { PACKAGE_PIN U13 IOSTANDARD LVCMOS33 } [get_ports { pmod_jc_10 }];
set_property -dict { PACKAGE_PIN U12 IOSTANDARD LVCMOS33 PULLUP TRUE } [get_ports { pmod_jc[1] }];
set_property -dict { PACKAGE_PIN V12 IOSTANDARD LVCMOS33 } [get_ports { pmod_jc[2] }];
set_property -dict { PACKAGE_PIN V10 IOSTANDARD LVCMOS33 PULLUP TRUE } [get_ports { pmod_jc[3] }];
set_property -dict { PACKAGE_PIN V11 IOSTANDARD LVCMOS33 } [get_ports { pmod_jc[4] }];
set_property -dict { PACKAGE_PIN U14 IOSTANDARD LVCMOS33 PULLUP TRUE } [get_ports { pmod_jc[7] }];
set_property -dict { PACKAGE_PIN V14 IOSTANDARD LVCMOS33 } [get_ports { pmod_jc[8] }];
set_property -dict { PACKAGE_PIN T13 IOSTANDARD LVCMOS33 PULLUP TRUE } [get_ports { pmod_jc[9] }];
set_property -dict { PACKAGE_PIN U13 IOSTANDARD LVCMOS33 } [get_ports { pmod_jc[10] }];

################################################################################
# PMOD header JD (standard, 200 ohm protection resisters)
@ -135,8 +135,8 @@ set_property -dict { PACKAGE_PIN P14 IOSTANDARD LVCMOS33 PULLDOWN TRUE } [get_po
set_property -dict { PACKAGE_PIN T11 IOSTANDARD LVCMOS33 PULLDOWN TRUE } [get_ports { shield_io[3] }];
set_property -dict { PACKAGE_PIN R12 IOSTANDARD LVCMOS33 PULLDOWN TRUE } [get_ports { shield_io[4] }];
set_property -dict { PACKAGE_PIN T14 IOSTANDARD LVCMOS33 PULLDOWN TRUE } [get_ports { shield_io[5] }];
set_property -dict { PACKAGE_PIN T15 IOSTANDARD LVCMOS33 PULLDOWN TRUE } [get_ports { shield_io[6] }];
set_property -dict { PACKAGE_PIN T16 IOSTANDARD LVCMOS33 PULLDOWN TRUE } [get_ports { shield_io[7] }];
set_property -dict { PACKAGE_PIN T15 IOSTANDARD LVCMOS33 } [get_ports { pmod_jb[4] }];
set_property -dict { PACKAGE_PIN T16 IOSTANDARD LVCMOS33 } [get_ports { pmod_jb[8] }];
set_property -dict { PACKAGE_PIN N15 IOSTANDARD LVCMOS33 PULLDOWN TRUE } [get_ports { shield_io[8] }];
set_property -dict { PACKAGE_PIN M16 IOSTANDARD LVCMOS33 PULLDOWN TRUE } [get_ports { shield_io[9] }];
set_property -dict { PACKAGE_PIN V17 IOSTANDARD LVCMOS33 PULLDOWN TRUE } [get_ports { shield_io[10] }];
@ -552,3 +552,4 @@ set_false_path -quiet -through [get_nets -hierarchical -filter {mr_ff == TRUE}]
set_false_path -quiet -to [get_pins -filter {REF_PIN_NAME == PRE} -of_objects [get_cells -hierarchical -filter {ars_ff1 == TRUE || ars_ff2 == TRUE}]]

set_max_delay 2 -quiet -from [get_pins -filter {REF_PIN_NAME == C} -of_objects [get_cells -hierarchical -filter {ars_ff1 == TRUE}]] -to [get_pins -filter {REF_PIN_NAME == D} -of_objects [get_cells -hierarchical -filter {ars_ff2 == TRUE}]]


@ -17,6 +17,7 @@ entity toplevel is
HAS_FPU : boolean := true;
HAS_BTC : boolean := true;
HAS_SHORT_MULT : boolean := false;
HAS_LPC : boolean := true;
USE_LITEDRAM : boolean := false;
NO_BRAM : boolean := false;
DISABLE_FLATTEN_CORE : boolean := false;
@ -60,6 +61,10 @@ entity toplevel is
-- GPIO
shield_io : inout std_ulogic_vector(44 downto 0);

-- LPC
pmod_jb : inout std_ulogic_vector(10 downto 1);
pmod_jc : inout std_ulogic_vector(10 downto 1);

-- Ethernet
eth_ref_clk : out std_ulogic;
eth_clocks_tx : in std_ulogic;
@ -163,6 +168,18 @@ architecture behaviour of toplevel is
signal gpio_out : std_ulogic_vector(NGPIO - 1 downto 0);
signal gpio_dir : std_ulogic_vector(NGPIO - 1 downto 0);

-- LPC
signal lpc_data_o : std_ulogic_vector(3 downto 0);
signal lpc_data_o_reg : std_ulogic_vector(3 downto 0);
signal lpc_data_oe : std_ulogic;
signal lpc_data_i : std_ulogic_vector(3 downto 0);
signal lpc_irq_o : std_ulogic;
signal lpc_irq_oe : std_ulogic;
signal lpc_irq_i : std_ulogic;
signal lpc_frame_n : std_ulogic;
signal lpc_reset_n : std_ulogic;
signal lpc_clock : std_ulogic;

-- Fixup various memory sizes based on generics
function get_bram_size return natural is
begin
@ -196,6 +213,7 @@ begin
HAS_FPU => HAS_FPU,
HAS_BTC => HAS_BTC,
HAS_SHORT_MULT => HAS_SHORT_MULT,
HAS_LPC => HAS_LPC,
HAS_DRAM => USE_LITEDRAM,
DRAM_SIZE => 256 * 1024 * 1024,
DRAM_INIT_SIZE => PAYLOAD_SIZE,
@ -238,6 +256,17 @@ begin
gpio_out => gpio_out,
gpio_dir => gpio_dir,

-- LPC
lpc_data_o => lpc_data_o,
lpc_data_oe => lpc_data_oe,
lpc_data_i => lpc_data_i,
lpc_frame_n => lpc_frame_n,
lpc_reset_n => lpc_reset_n,
lpc_clock => lpc_clock,
lpc_irq_o => lpc_irq_o,
lpc_irq_oe => lpc_irq_oe,
lpc_irq_i => lpc_irq_i,

-- External interrupts
ext_irq_eth => ext_irq_eth,
ext_irq_sdcard => ext_irq_sdcard,
@ -263,6 +292,35 @@ begin

--uart_pmod_rts_n <= '0';

-- LPC inout/bidir pins (assignments requested by paulus)
lpc_clock <= pmod_jb(1);
pmod_jb(2) <= '0';

lpc_data_i(0) <= pmod_jc(1);
lpc_data_i(1) <= pmod_jc(3);
lpc_data_i(2) <= pmod_jc(7);
lpc_data_i(3) <= pmod_jc(9);
lpc_data_o_reg <= lpc_data_o;

pmod_jc(1) <= lpc_data_o_reg(0) when lpc_data_oe = '1' and ext_rst_n = '1' else 'Z';
pmod_jc(2) <= '0';
pmod_jc(3) <= lpc_data_o_reg(1) when lpc_data_oe = '1' and ext_rst_n = '1' else 'Z';
pmod_jc(4) <= '0';
pmod_jc(7) <= lpc_data_o_reg(2) when lpc_data_oe = '1' and ext_rst_n = '1' else 'Z';
pmod_jc(8) <= '0';
pmod_jc(9) <= lpc_data_o_reg(3) when lpc_data_oe = '1' and ext_rst_n = '1' else 'Z';
pmod_jc(10) <= '0';

lpc_reset_n <= pmod_jb(3);
pmod_jb(4) <= 'Z'; -- actually comes out on 40-pin connector
lpc_frame_n <= pmod_jb(7);
pmod_jb(7) <= 'Z';
pmod_jb(8) <= 'Z'; -- actually comes out on 40-pin connector
pmod_jb(9) <= lpc_irq_o when lpc_irq_oe = '1' and ext_rst_n = '1' else 'Z';
lpc_irq_i <= pmod_jb(9);
pmod_jb(10) <= lpc_data_oe;


-- SPI Flash
--
-- Note: Unlike many other boards, the SPI flash on the Arty has
@ -699,8 +757,8 @@ begin
gpio_in(3) <= shield_io(3);
gpio_in(4) <= shield_io(4);
gpio_in(5) <= shield_io(5);
gpio_in(6) <= shield_io(6);
gpio_in(7) <= shield_io(7);
gpio_in(6) <= shield_io(6); -- actually comes out on JB4
gpio_in(7) <= shield_io(7); -- actually comes out on JB8
gpio_in(8) <= shield_io(8);
gpio_in(9) <= shield_io(9);
gpio_in(10) <= shield_io(10);

@ -17,7 +17,8 @@ entity toplevel is
ICACHE_NUM_LINES : natural := 64;
LOG_LENGTH : natural := 512;
DISABLE_FLATTEN_CORE : boolean := false;
UART_IS_16550 : boolean := true
UART_IS_16550 : boolean := true;
HAS_LPC : boolean := true
);
port(
ext_clk : in std_ulogic;
@ -25,7 +26,19 @@ entity toplevel is

-- UART0 signals:
uart0_txd : out std_ulogic;
uart0_rxd : in std_ulogic
uart0_rxd : in std_ulogic;

-- LPC
lpc_clock : in std_ulogic;

lpc_frame_n : in std_ulogic;
lpc_reset_n : in std_ulogic;
lpc_data_i : in std_ulogic_vector(3 downto 0);
lpc_irq_i : in std_ulogic;

lpc_data_oe : out std_ulogic;
lpc_data_o_reg : out std_ulogic_vector(3 downto 0);
lpc_irq_o2 : out std_ulogic
);
end entity toplevel;

@ -39,6 +52,11 @@ architecture behaviour of toplevel is
signal system_clk : std_ulogic;
signal system_clk_locked : std_ulogic;

-- LPC
signal lpc_data_i_reg : std_ulogic_vector(3 downto 0);
signal lpc_data_o : std_ulogic_vector(3 downto 0);
signal lpc_irq_o : std_ulogic;
signal lpc_irq_oe : std_ulogic;
begin

reset_controller: entity work.soc_reset
@ -79,13 +97,35 @@ begin
ICACHE_NUM_LINES => ICACHE_NUM_LINES,
LOG_LENGTH => LOG_LENGTH,
DISABLE_FLATTEN_CORE => DISABLE_FLATTEN_CORE,
UART0_IS_16550 => UART_IS_16550
UART0_IS_16550 => UART_IS_16550,
HAS_LPC => HAS_LPC
)
port map (
system_clk => system_clk,
rst => soc_rst,
uart0_txd => uart0_txd,
uart0_rxd => uart0_rxd
uart0_rxd => uart0_rxd,

-- LPC
lpc_data_o => lpc_data_o,
lpc_data_oe => lpc_data_oe,
lpc_data_i => lpc_data_i,
lpc_frame_n => lpc_frame_n,
lpc_reset_n => lpc_reset_n,
lpc_clock => lpc_clock,
lpc_irq_o => lpc_irq_o,
lpc_irq_oe => lpc_irq_oe,
lpc_irq_i => lpc_irq_i
);

process(lpc_clock)
begin
if rising_edge(lpc_clock) then
lpc_data_i_reg <= lpc_data_i;
lpc_data_o_reg <= lpc_data_o when lpc_data_oe = '1' and ext_rst = '1' else "ZZZZ";
end if;
end process;

lpc_irq_o2 <= lpc_irq_o when lpc_irq_oe = '1' and ext_rst = '1' else 'Z';

end architecture behaviour;

Binary file not shown.

Binary file not shown.

13153
lpc/lpc.v

File diff suppressed because it is too large Load Diff

@ -50,6 +50,7 @@ filesets:
- sync_fifo.vhdl
- spi_rxtx.vhdl
- spi_flash_ctrl.vhdl
- lpc/lpc.v : {file_type : verilogSource}
file_type : vhdlSource-2008

fpga:
@ -339,6 +340,7 @@ targets:
- has_fpu
- has_btc
- has_short_mult
- has_lpc
generate: [litedram_arty, liteeth_arty, litesdcard_arty]
tools:
vivado: {part : xc7a100ticsg324-1L}
@ -504,6 +506,12 @@ parameters:
paramtype : generic
default : false

has_lpc:
datatype : bool
description : Include an LPC slave in the SOC
paramtype : generic
default : false

disable_flatten_core:
datatype : bool
description : Prevent Vivado from flattening the main core components

@ -26,6 +26,7 @@ use work.wishbone_types.all;
-- 0xc0006000: SPI Flash controller
-- 0xc0007000: GPIO controller
-- 0xc8nnnnnn: External IO bus
-- 0xcb000000: LPC slave (same addr as Kestral)
-- 0xf0000000: Flash "ROM" mapping
-- 0xff000000: DRAM init code (if any) or flash ROM (**)

@ -50,6 +51,8 @@ use work.wishbone_types.all;
-- 2 : UART1
-- 3 : SD card
-- 4 : GPIO
-- 5 : LPC UART
-- 6 : LPC IPMI

entity soc is
generic (
@ -60,6 +63,7 @@ entity soc is
HAS_FPU : boolean := true;
HAS_BTC : boolean := true;
HAS_SHORT_MULT : boolean := false;
HAS_LPC : boolean := false;
DISABLE_FLATTEN_CORE : boolean := false;
HAS_DRAM : boolean := false;
DRAM_SIZE : integer := 0;
@ -129,6 +133,17 @@ entity soc is
gpio_dir : out std_ulogic_vector(NGPIO - 1 downto 0);
gpio_in : in std_ulogic_vector(NGPIO - 1 downto 0) := (others => '0');

-- LPC signals
lpc_data_o : out std_ulogic_vector(3 downto 0);
lpc_data_oe : out std_ulogic;
lpc_data_i : in std_ulogic_vector(3 downto 0) := (others => '1');
lpc_frame_n : in std_ulogic := '1';
lpc_reset_n : in std_ulogic := '1';
lpc_clock : in std_ulogic := '1';
lpc_irq_o : out std_ulogic;
lpc_irq_oe : out std_ulogic;
lpc_irq_i : in std_ulogic := '0';

-- DRAM controller signals
alt_reset : in std_ulogic := '0'
);
@ -146,7 +161,7 @@ architecture behaviour of soc is

-- Arbiter array (ghdl doesnt' support assigning the array
-- elements in the entity instantiation)
constant NUM_WB_MASTERS : positive := 4;
constant NUM_WB_MASTERS : positive := 5;
signal wb_masters_out : wishbone_master_out_vector(0 to NUM_WB_MASTERS-1);
signal wb_masters_in : wishbone_slave_out_vector(0 to NUM_WB_MASTERS-1);

@ -187,6 +202,26 @@ architecture behaviour of soc is
signal wb_spiflash_is_reg : std_ulogic;
signal wb_spiflash_is_map : std_ulogic;

-- LPC Flash controller signals:
signal wb_lpc_in : wb_io_master_out;
signal wb_lpc_out : wb_io_slave_out;
signal lpc_vuart_irq : std_ulogic;
signal lpc_ipmi_irq : std_ulogic;

-- LPC master wb
signal lpc_master_wb_cyc : std_ulogic;
signal lpc_master_wb_stb : std_ulogic;
signal lpc_master_wb_err : std_ulogic;
signal lpc_master_wb_addr : std_ulogic_vector(29 downto 0);

signal wb_lpc_dma_out : wb_io_master_out := wb_io_master_out_init;
signal wb_lpc_dma_in : wb_io_slave_out;
signal wb_lpc_dma_nr : wb_io_master_out;
signal wb_lpc_dma_ir : wb_io_slave_out;

-- for conversion from non-pipelined wishbone to pipelined
signal wb_lpc_dma_stb_sent : std_ulogic;

-- XICS signals:
signal wb_xics_icp_in : wb_io_master_out;
signal wb_xics_icp_out : wb_io_slave_out;
@ -225,6 +260,7 @@ architecture behaviour of soc is
signal rst_core : std_ulogic := '1';
signal rst_uart : std_ulogic := '1';
signal rst_xics : std_ulogic := '1';
signal rst_lpc : std_ulogic := '1';
signal rst_spi : std_ulogic := '1';
signal rst_gpio : std_ulogic := '1';
signal rst_bram : std_ulogic := '1';
@ -243,6 +279,7 @@ architecture behaviour of soc is
SLAVE_IO_SPI_FLASH_MAP,
SLAVE_IO_GPIO,
SLAVE_IO_EXTERNAL,
SLAVE_IO_LPC,
SLAVE_IO_NONE);
signal slave_io_dbg : slave_io_type;

@ -312,6 +349,7 @@ begin
rst_spi <= rst;
rst_xics <= rst;
rst_gpio <= rst;
rst_lpc <= rst;
rst_bram <= rst;
rst_dtm <= rst;
rst_wbar <= rst;
@ -360,11 +398,13 @@ begin
wb_masters_out <= (0 => wishbone_dcore_out,
1 => wishbone_icore_out,
2 => wishbone_widen_data(wishbone_dma_out),
3 => wishbone_debug_out);
3 => wishbone_widen_data(wb_lpc_dma_out),
4 => wishbone_debug_out);
wishbone_dcore_in <= wb_masters_in(0);
wishbone_icore_in <= wb_masters_in(1);
wishbone_dma_in <= wishbone_narrow_data(wb_masters_in(2), wishbone_dma_out.adr);
wishbone_debug_in <= wb_masters_in(3);
wb_lpc_dma_in <= wishbone_narrow_data(wb_masters_in(3), wb_lpc_dma_out.adr);
wishbone_debug_in <= wb_masters_in(4);
wishbone_arbiter_0: entity work.wishbone_arbiter
generic map(
NUM_MASTERS => NUM_WB_MASTERS
@ -616,6 +656,8 @@ begin
slave_io := SLAVE_IO_UART1;
elsif std_match(match, x"C8---") then
slave_io := SLAVE_IO_EXTERNAL;
elsif std_match(match, x"CB---") then
slave_io := SLAVE_IO_LPC;
elsif std_match(match, x"C0004") then
slave_io := SLAVE_IO_ICP;
elsif std_match(match, x"C0005") then
@ -636,6 +678,8 @@ begin
wb_spiflash_is_map <= '0';
wb_gpio_in <= wb_sio_out;
wb_gpio_in.cyc <= '0';
wb_lpc_in <= wb_sio_out;
wb_lpc_in.cyc <= '0';

-- Only give xics 8 bits of wb addr (for now...)
wb_xics_icp_in <= wb_sio_out;
@ -693,6 +737,9 @@ begin
wb_sio_in <= wb_ext_io_out;
end if;

when SLAVE_IO_LPC =>
wb_lpc_in.cyc <= wb_sio_out.cyc;
wb_sio_in <= wb_lpc_out;
when SLAVE_IO_SYSCON =>
wb_syscon_in.cyc <= wb_sio_out.cyc;
wb_sio_in <= wb_syscon_out;
@ -892,6 +939,115 @@ begin
wb_spiflash_out.stall <= wb_spiflash_in.cyc and not wb_spiflash_out.ack;
end generate;

lpc_gen: if HAS_LPC generate
component lpc_top port (
clk : in std_ulogic;
rst : in std_ulogic;

lclk : in std_ulogic;
lframe : in std_ulogic;
lreset : in std_ulogic;
lad_en : out std_ulogic;
lad_out : out std_ulogic_vector(3 downto 0);
lad_in : in std_ulogic_vector(3 downto 0);

adr : in std_ulogic_vector(13 downto 0);
dat_w : in std_ulogic_vector(31 downto 0);
dat_r : out std_ulogic_vector(31 downto 0);
ack : out std_ulogic;
cyc : in std_ulogic;
sel : in std_ulogic;
stb : in std_ulogic;
we : in std_ulogic;

dma_adr : out std_ulogic_vector(29 downto 0);
dma_dat_w : out std_ulogic_vector(31 downto 0);
dma_dat_r : in std_ulogic_vector(31 downto 0);
dma_ack : in std_ulogic;
dma_cyc : out std_ulogic;
dma_sel : out std_ulogic_vector(3 downto 0);
dma_stb : out std_ulogic;
dma_we : out std_ulogic;

bmc_ipmi_irq : out std_ulogic;
bmc_vuart_irq : out std_ulogic;
target_ipmi_irq : out std_ulogic;
target_vuart_irq : out std_ulogic
);
end component;
begin
lpc0: lpc_top
port map(
rst => rst_lpc,
clk => system_clk,

adr => wb_lpc_in.adr(13 downto 0),
dat_w => wb_lpc_in.dat(31 downto 0),
dat_r => wb_lpc_out.dat(31 downto 0),
ack => wb_lpc_out.ack,
cyc => wb_lpc_in.cyc,
sel => wb_lpc_in.sel(0),
stb => wb_lpc_in.stb,
we => wb_lpc_in.we,

dma_adr => wb_lpc_dma_nr.adr(29 downto 0),
dma_dat_w => wb_lpc_dma_nr.dat(31 downto 0),
dma_dat_r => wb_lpc_dma_ir.dat(31 downto 0),
dma_sel => wb_lpc_dma_nr.sel,
dma_cyc => wb_lpc_dma_nr.cyc,
dma_stb => wb_lpc_dma_nr.stb,
dma_ack => wb_lpc_dma_ir.ack,
dma_we => wb_lpc_dma_nr.we,

lclk => lpc_clock,
lframe => lpc_frame_n,
lreset => lpc_reset_n,
lad_out => lpc_data_o,
lad_in => lpc_data_i,
lad_en => lpc_data_oe,

bmc_ipmi_irq => lpc_ipmi_irq,
bmc_vuart_irq => lpc_vuart_irq
);
lpc_master_wb_err <= '0';
lpc_irq_o <= '0';
lpc_irq_oe <= '0';
-- FIXME hook up irqs

wb_lpc_out.stall <= not wb_lpc_out.ack;

-- Convert non-pipelined DMA wishbone to pipelined by suppressing
-- non-acknowledged strobes
process(system_clk)
begin
if rising_edge(system_clk) then
wb_lpc_dma_out <= wb_lpc_dma_nr;
if wb_lpc_dma_stb_sent = '1' or
(wb_lpc_dma_out.stb = '1' and wb_lpc_dma_in.stall = '0') then
wb_lpc_dma_out.stb <= '0';
end if;
if wb_lpc_dma_nr.cyc = '0' or wb_lpc_dma_ir.ack = '1' then
wb_lpc_dma_stb_sent <= '0';
elsif wb_lpc_dma_in.stall = '0' then
wb_lpc_dma_stb_sent <= wb_lpc_dma_nr.stb;
end if;
wb_lpc_dma_ir <= wb_lpc_dma_in;
end if;
end process;

end generate;

no_lpc_gen: if not HAS_LPC generate
lpc_data_o <= (others => '0');
lpc_data_oe <= '0';
lpc_irq_o <= '0';
lpc_irq_oe <= '0';

wb_lpc_out.dat <= (others => '1');
wb_lpc_out.ack <= wb_lpc_in.cyc and wb_lpc_in.stb;
wb_lpc_out.stall <= wb_lpc_in.cyc and not wb_lpc_out.ack;
end generate;

xics_icp: entity work.xics_icp
port map(
clk => system_clk,
@ -942,6 +1098,8 @@ begin
int_level_in(2) <= uart1_irq;
int_level_in(3) <= ext_irq_sdcard;
int_level_in(4) <= gpio_intr;
int_level_in(5) <= lpc_vuart_irq;
int_level_in(6) <= lpc_ipmi_irq;
end process;

-- BRAM Memory slave

Loading…
Cancel
Save