You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
microwatt/plru.vhdl

78 lines
1.8 KiB
VHDL

library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
use ieee.math_real.all;
entity plru is
generic (
BITS : positive := 2
)
;
port (
clk : in std_ulogic;
rst : in std_ulogic;
acc : in std_ulogic_vector(BITS-1 downto 0);
acc_en : in std_ulogic;
lru : out std_ulogic_vector(BITS-1 downto 0)
);
end entity plru;
architecture rtl of plru is
constant count : positive := 2 ** BITS - 1;
subtype node_t is integer range 0 to count;
type tree_t is array(node_t) of std_ulogic;
signal tree: tree_t;
begin
-- XXX Check if we can turn that into a little ROM instead that
-- takes the tree bit vector and returns the LRU. See if it's better
-- in term of FPGA resouces usage...
get_lru: process(tree)
variable node : node_t;
begin
node := 0;
for i in 0 to BITS-1 loop
-- report "GET: i:" & integer'image(i) & " node:" & integer'image(node) & " val:" & std_ulogic'image(tree(node));
lru(BITS-1-i) <= tree(node);
if i /= BITS-1 then
node := node * 2;
if tree(node) = '1' then
node := node + 2;
else
node := node + 1;
end if;
end if;
end loop;
end process;
update_lru: process(clk)
variable node : node_t;
variable abit : std_ulogic;
begin
if rising_edge(clk) then
if rst = '1' then
tree <= (others => '0');
elsif acc_en = '1' then
node := 0;
for i in 0 to BITS-1 loop
abit := acc(BITS-1-i);
tree(node) <= not abit;
-- report "UPD: i:" & integer'image(i) & " node:" & integer'image(node) & " val" & std_ulogic'image(not abit);
if i /= BITS-1 then
node := node * 2;
if abit = '1' then
node := node + 2;
else
node := node + 1;
end if;
end if;
end loop;
end if;
end if;
end process;
end;