diff --git a/LoPAR/app_pa_processor_binding.xml b/LoPAR/app_pa_processor_binding.xml
index 314e6fc..d65e2df 100644
--- a/LoPAR/app_pa_processor_binding.xml
+++ b/LoPAR/app_pa_processor_binding.xml
@@ -3524,7 +3524,7 @@
-
+
msr
@@ -3535,9 +3535,6 @@
-
-
-
PR = 0, supervisor state
@@ -3546,9 +3543,6 @@
-
-
-
FP = 1, floating point enabled
@@ -3557,9 +3551,6 @@
-
-
-
ME = 1, machine checks enabled
@@ -3568,9 +3559,6 @@
-
-
-
FE0, FE1 = 0, floating point exceptions disabled
@@ -3579,9 +3567,6 @@
-
-
-
IP, see
@@ -3591,9 +3576,6 @@
-
-
-
IR,DR, see
@@ -3603,9 +3585,6 @@
-
-
-
SF=0, 32-bit mode
@@ -3614,9 +3593,6 @@
-
-
-
ILE,LE, little endian support
diff --git a/LoPAR/ch_lpar_option.xml b/LoPAR/ch_lpar_option.xml
index 59324bd..c23e332 100644
--- a/LoPAR/ch_lpar_option.xml
+++ b/LoPAR/ch_lpar_option.xml
@@ -7171,7 +7171,7 @@ hcall ( const uint64 H_ENTER,
- If the MUI option is enabled
+
+ }]]>
@@ -9574,7 +9574,7 @@ hcall ( const uint64 H_SET_MODE, /* Set the mode of the specified processing */
Semantics:
- switch (resource) {
+
+ break; }]]>
H_SET_MODE Parameters per ISA Level
@@ -23825,7 +23825,7 @@ hcall ( const uint64 H_RESET_MEMSTATS, uint64 flags, int64 lpx1, int64 lpx2,
If (Flags AND ACA) and reference rate array not enabled, returns H_Not_Available.
- for each of lpx1..6
+
+ Sets the configured Number of Ref Bits in the Reference History Bit Array for the lpx ]]>
Return H_Success.
@@ -24261,7 +24261,7 @@ hcall ( const uint64 H_RETURN_PAGEINFO,
count = 0; /* number of entries matching in dest */
- if (Range_Search = 1) // lpn0..lpn1 range case
+ lpx1) then return H_Success else return H_CONTINUE;
- }
+ }]]>
- if (Range_Search = 0) // memory buffer case
+
+ }]]>
@@ -24387,14 +24387,14 @@ hcall ( const uint64 H_BULK_READ_HBA, uint64 flags, int64 lpx1, int64 lpx2,
If a reserved flags bit is set return appropriate H_UNSUPPORTED_FLAG value.
- for each of lpx1..6
+
+ // end of for each lpx1..6]]>
Return H_Success.
diff --git a/LoPAR/sec_rtas_call_defn.xml b/LoPAR/sec_rtas_call_defn.xml
index 2f4c1f3..731ff2f 100644
--- a/LoPAR/sec_rtas_call_defn.xml
+++ b/LoPAR/sec_rtas_call_defn.xml
@@ -4900,13 +4900,13 @@
Defined Indicators
-
+
-
-
+
+
-
+
@@ -5426,7 +5426,7 @@
Vendor Specific
- 9100-9999
+ 9100- 9999
@@ -5819,12 +5819,12 @@
Defined Sensors
-
-
-
+
+
+
-
-
+
+
@@ -6408,7 +6408,7 @@
Vendor Specific
- 9100-9999
+ 9100- 9999
@@ -12425,6 +12425,7 @@
(Normal Operations)
+
@@ -12545,6 +12546,7 @@
+
@@ -12607,6 +12609,7 @@
error recovery action
+
@@ -12649,6 +12652,7 @@
transition
+
@@ -12689,6 +12693,7 @@
Not a valid transition
+
@@ -18227,7 +18232,7 @@
22
- platform_auto_power_restart
+ platform_auto_power_restart
@@ -18407,7 +18412,7 @@
31
- sp-current-flash-image
+ sp-current-flash-image
@@ -18427,7 +18432,7 @@
32
- platform-dump-max-size
+ platform-dump-max-size
@@ -19256,15 +19261,15 @@
-
+
Out
-
+
Status
-
+
0: Success
-1: Hardware Error
-2: Busy, Try again later
@@ -19275,11 +19280,6 @@
below)
-
-
-
-
-
@@ -19393,15 +19393,15 @@
-
+
Out
-
+
Status
-
+
0: Success
-1: Hardware Error
-2: Busy, Try again later
@@ -19412,11 +19412,6 @@
below)
-
-
-
-
-
diff --git a/LoPAR/sec_rtas_environment.xml b/LoPAR/sec_rtas_environment.xml
index 7172e43..d4c6b23 100644
--- a/LoPAR/sec_rtas_environment.xml
+++ b/LoPAR/sec_rtas_environment.xml
@@ -801,7 +801,7 @@
“nvram-fetch”
-
+
@@ -815,7 +815,7 @@
“nvram-store”
-
+
@@ -829,7 +829,7 @@
“get-time-of-day”
-
+
@@ -843,7 +843,7 @@
“set-time-of-day”
-
+
@@ -857,7 +857,7 @@
“set-time-for-power-on”
-
+
@@ -871,7 +871,7 @@
“event-scan”
-
+
@@ -885,7 +885,7 @@
“check-exception”
-
+
@@ -899,7 +899,7 @@
“rtas-last-error”
-
+
@@ -913,7 +913,7 @@
“ibm,platform-dump”
-
+
@@ -927,7 +927,7 @@
“ibm,read-pci-config”
-
+
@@ -941,7 +941,7 @@
“ibm,write-pci-config”
-
+
@@ -949,7 +949,7 @@
“display-character”
-
+
@@ -963,7 +963,7 @@
“set-indicator”
-
+
@@ -978,7 +978,7 @@
“get-sensor-state”
-
+
@@ -992,7 +992,7 @@
“ibm,set-system-parameter”
-
+
@@ -1006,7 +1006,7 @@
“ibm,get-system-parameter”
-
+
@@ -1020,7 +1020,7 @@
“set-power-level”
-
+
@@ -1035,7 +1035,7 @@
“get-power-level”
-
+
@@ -1046,7 +1046,7 @@
“power-off”
-
+
@@ -1061,7 +1061,7 @@
“ibm,power-off-ups”
-
+
@@ -1076,7 +1076,7 @@
“system-reboot”
-
+
@@ -1090,7 +1090,7 @@
“ibm,update-flash-64-and-reboot”
-
+
@@ -1104,7 +1104,7 @@
“ibm,manage-flash-image”
-
+
@@ -1118,7 +1118,7 @@
“ibm,validate-flash-image”
-
+
@@ -1132,7 +1132,7 @@
“ibm,activate-firmware”
-
+
@@ -1146,7 +1146,7 @@
“stop-self”
-
+
@@ -1160,7 +1160,7 @@
“start-cpu”
-
+
@@ -1171,7 +1171,7 @@
“query-cpu-stopped-state”
-
+
@@ -1182,7 +1182,7 @@
“ibm,os-term”
-
+
@@ -1196,7 +1196,7 @@
“ibm,exti2c”
-
+
@@ -1210,7 +1210,7 @@
“ibm,get-xive”
-
+
@@ -1224,7 +1224,7 @@
“ibm,set-xive”
-
+
@@ -1235,7 +1235,7 @@
“ibm,int-off”
-
+
@@ -1246,7 +1246,7 @@
“ibm,int-on”
-
+
@@ -1257,7 +1257,7 @@
“ibm,configure-connector”
-
+
@@ -1272,7 +1272,7 @@
“ibm,set-eeh-option”
-
+
@@ -1286,7 +1286,7 @@
“ibm,set-slot-reset”
-
+
@@ -1314,7 +1314,7 @@
“ibm,read-slot-reset-state2”
-
+
@@ -1328,7 +1328,7 @@
“ibm,get-config-addr-info2”
-
+
@@ -1342,7 +1342,7 @@
“ibm,slot-error-detail”
-
+
@@ -1356,7 +1356,7 @@
“ibm,open-errinjct”
-
+
@@ -1370,7 +1370,7 @@
“ibm,errinjct”
-
+
@@ -1381,7 +1381,7 @@
“ibm,close-errinjct”
-
+
@@ -1392,7 +1392,7 @@
“ibm,nmi-register”
-
+
@@ -1406,7 +1406,7 @@
“ibm,nmi-interlock”
-
+
@@ -1417,7 +1417,7 @@
“ibm,configure-bridge”
-
+
@@ -1431,7 +1431,7 @@
“ibm,configure-pe”
-
+
@@ -1445,7 +1445,7 @@
“ibm,get-indices”
-
+
@@ -1460,7 +1460,7 @@
“ibm,get-vpd”
-
+
@@ -1474,7 +1474,7 @@
“ibm,manage-storage-preservation”
-
+
@@ -1488,7 +1488,7 @@
“ibm,get-dynamic-sensor-state”
-
+
@@ -1503,7 +1503,7 @@
“ibm,set-dynamic-indicator”
-
+
@@ -1518,7 +1518,7 @@
“ibm,change-msi”
-
+
@@ -1533,7 +1533,7 @@
“ibm,suspend-me”
-
+
@@ -1547,7 +1547,7 @@
“ibm,update-nodes”
-
+
@@ -1561,7 +1561,7 @@
“ibm,update-properties”
-
+
@@ -1575,7 +1575,7 @@
“ibm,configure-kernel-dump”
-
+
@@ -1590,7 +1590,7 @@
“ibm,query-pe-dma-window”
-
+
@@ -1604,7 +1604,7 @@
“ibm,create-pe-dma-window”
-
+
@@ -1615,7 +1615,7 @@
“ibm,remove-pe-dma-window”
-
+
@@ -1626,7 +1626,7 @@
“ibm,reset-pe-dma-windows”
-
+