This section lists documents which were referenced in this specification or which provide additional information, and some useful information for obtaining these documents. Referenced documents are listed below. When any of the following standards are superseded by an approved revision, the revision shall apply. Power ISA IEEE 1275, IEEE Standard for Boot (Initialization Configuration) Firmware: Core Requirements and Practices IEEE part number DS02683, ISBN 1-55937-426-8 Core Errata, IEEE P1275.7/D4 Open Firmware Recommended Practice:OBP-TFTP Extension Open Firmware Recommended Practice: Device Support Extensions PCI Bus binding to: IEEE Std 1275-1994, Standard for Boot (Initialization, Configuration) Firmware Open Firmware: Recommended Practice - Interrupt Mapping Open Firmware: Recommended Practice - Forth Source and FCode Image Support, Version 1.0 Open Firmware: Recommended Practice - Interrupt Mapping, Version 1.0 Open Firmware: Recommended Practice - TFTP Booting Extensions, Version 0.8 Open Firmware: Recommended Practice - Interposition, Version 0.2 MS-DOS Programmer's Reference Published by Microsoft Peering Inside the PE: A Tour of the Win32 Portable Executable File Format Found in the March, 1994 issue of Microsoft Systems Journal ISO-9660, Information processing -- Volume and file structure of CD-ROM for information interchange Published by International Organization for Standardization System V Application Binary Interface, PowerPC Processor Supplement By Sunsoft ISO Standard 8879:1986, Information Processing -- Text and Office Systems -- Standard Generalized Markup Language (SGML) IEEE 996, A Standard for an Extended Personal Computer Back Plane Bus PCI Local Bus Specification All designers are responsible for assuring that they use the most current version of this document at the time that they design conventional PCI related components or platforms. See the PCI SIG website for the most current version of this document. PCI-to-PCI Bridge Architecture Specification All designers are responsible for assuring that they use the most current version of this document at the time that they design conventional PCI related components or platforms. See the PCI SIG website for the most current version of this document. PCI Standard Hot-Plug Controller and Subsystem Specification PCI-X Protocol Addendum to the PCI Local Bus Specification All designers are responsible for assuring that they use the most current version of this document at the time that they design PCI-X related components or platforms. See the PCI SIG website for the most current version of this document. PCI Express Base Specification All designers are responsible for assuring that they use the most current version of this document at the time that they design PCI Express related components or platforms. See the PCI SIG website for the most current version of this document. PCI Express to PCI/PCI-X Bridge Specification All designers are responsible for assuring that they use the most current version of this document at the time that they design PCI Express related components or platforms. See the PCI SIG website for the most current version of this document. System Management BIOS (SMBIOS) Reference Specification (List Number Reserved for Compatibility) (List Number Reserved for Compatibility) (List Number Reserved for Compatibility) IBM RS/6000® Division, Product Topology Data System, Product Development Guide Version 2.1 Single Root I/O Virtualization and Sharing Specification All designers are responsible for assuring that they use the most current version of this document at the time that they design PCI Express SR-IOV related components or platforms. See the PCI SIG website for the most current version of this document. Multi-Root I/O Virtualization and Sharing Specification All designers are responsible for assuring that they use the most current version of this document at the time that they design PCI Express MR-IOV related components or platforms. See the PCI SIG website for the most current version of this document.