You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Programming-Guides/Porting_Vector_Intrinsics/pom.xml

149 lines
8.6 KiB
XML

<?xml version="1.0" encoding="UTF-8"?>
<project xmlns="http://maven.apache.org/POM/4.0.0"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/maven-v4_0_0.xsd">
<parent>
<groupId>org.openpowerfoundation.docs</groupId>
<artifactId>workgroup-pom</artifactId>
<version>1.0.0-SNAPSHOT</version>
<relativePath>../pom.xml</relativePath>
</parent>
<modelVersion>4.0.0</modelVersion>
<!-- TODO: Rename the artifactID field to some appropriate for your new document -->
<artifactId>Porting-Guide-Vector-Intrinsics</artifactId>
<packaging>jar</packaging>
<!-- TODO: Rename the name field to some appropriate for your new document -->
<name>Porting-Guide-Vector-Intrinsics</name>
<properties>
<!-- This is set by Jenkins according to the branch. -->
<release.path.name></release.path.name>
<comments.enabled>0</comments.enabled>
</properties>
<!-- ################################################ -->
<!-- USE "mvn clean generate-sources" to run this POM -->
<!-- ################################################ -->
<build>
<plugins>
<plugin>
<groupId>org.openpowerfoundation.docs</groupId>
<artifactId>openpowerdocs-maven-plugin</artifactId>
<!-- version set in ../pom.xml -->
<executions>
<execution>
<id>generate-webhelp</id>
<goals>
<goal>generate-webhelp</goal>
</goals>
<phase>generate-sources</phase>
<configuration>
<!-- These parameters only apply to webhelp -->
<enableDisqus>${comments.enabled}</enableDisqus>
<disqusShortname>LoPAR-Virtualization</disqusShortname>
<enableGoogleAnalytics>1</enableGoogleAnalytics>
<googleAnalyticsId>UA-17511903-1</googleAnalyticsId>
<generateToc>
appendix toc,title
article/appendix nop
article toc,title
book toc,title,figure,table,example,equation
book/appendix nop
book/chapter nop
chapter toc,title
chapter/section nop
section toc
part toc,title
qandadiv toc
qandaset toc
reference toc,title
set toc,title
</generateToc>
<!-- The following elements sets the autonumbering of sections in output for chapter numbers but no numbered sections-->
<sectionAutolabel>1</sectionAutolabel>
<tocSectionDepth>3</tocSectionDepth>
<sectionLabelIncludesComponentLabel>1</sectionLabelIncludesComponentLabel>
<!-- TODO: Rename the webhelpDirname field to the new directory for new document -->
<webhelpDirname>Vector-Intrinsics</webhelpDirname>
<!-- TODO: Rename the pdfFilenameBase field to the PDF name for new document -->
<pdfFilenameBase>Vector-Intrinsics</pdfFilenameBase>
<!-- TODO: Define the appropriate work product type. These values are defined by the IPR Policy.
Consult with the Work Group Chair or a Technical Steering Committee member if you have
questions about which value to select.
If no value is provided below, the document will default to "Work Group Notes".-->
<workProduct>workgroupNotes</workProduct>
<!--workProduct>workgroupSpecification</workProduct-->
<!-- workProduct>candidateStandard</workProduct -->
<!-- workProduct>openpowerStandard</workProduct -->
<!-- TODO: Set the appropriate security policy for the document. For documents
which are not "public" this will affect the document title page and
create a vertical running ribbon on the internal margin of the
security status in all CAPS. Values and definitions are formally
defined by the IPR policy. A layman's definition follows:
public = this document may be shared outside the
foundation and thus this setting must be
used only when completely sure it allowed
foundationConfidential = this document may be shared freely with
OpenPOWER Foundation members but may not be
shared publicly
workgroupConfidential = this document may only be shared within the
work group and should not be shared with
other Foundation members or the public
The appropriate starting security for a new document is "workgroupConfidential". -->
<!--security>workgroupConfidential</security -->
<!-- security>foundationConfidential</security -->
<security>public</security>
<!-- TODO: Set the appropriate work flow status for the document. For documents
which are not "published" this will affect the document title page
and create a vertical running ribbon on the internal margin of the
security status in all CAPS. Values and definitions are formally
defined by the IPR policy. A layman's definition follows:
published = this document has completed all reviews and has
been published
draft = this document is actively being updated and has
not yet been reviewed
review = this document is presently being reviewed
The appropriate starting security for a new document is "draft". -->
<!-- documentStatus>draft</documentStatus -->
<documentStatus>review</documentStatus>
<!-- documentStatus>publish</documentStatus -->
</configuration>
</execution>
</executions>
<configuration>
<!-- These parameters apply to pdf and webhelp -->
<xincludeSupported>true</xincludeSupported>
<sourceDirectory>.</sourceDirectory>
<includes>
<!-- TODO: If you desire, you may change the following filename to something more appropriate for the new document -->
bk_main.xml
</includes>
<!-- **TODO: Set to the correct project URL. This likely needs input from the TSC. -->
<!-- canonicalUrlBase>http://openpowerfoundation.org/docs/template-guide/content</canonicalUrlBase -->
<glossaryCollection>${basedir}/../glossary/glossary-terms.xml</glossaryCollection>
<includeCoverLogo>1</includeCoverLogo>
<coverUrl>www.openpowerfoundation.org</coverUrl>
</configuration>
</plugin>
</plugins>
</build>
</project>