You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

706 lines
22 KiB
Verilog

3 years ago
// © IBM Corp. 2020
// Licensed under the Apache License, Version 2.0 (the "License"), as modified by
// the terms below; you may not use the files in this repository except in
// compliance with the License as modified.
// You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0
//
// Modified Terms:
//
// 1) For the purpose of the patent license granted to you in Section 3 of the
// License, the "Work" hereby includes implementations of the work of authorship
// in physical form.
//
// 2) Notwithstanding any terms to the contrary in the License, any licenses
// necessary for implementation of the Work that are available from OpenPOWER
// via the Power ISA End User License Agreement (EULA) are explicitly excluded
// hereunder, and may be obtained from OpenPOWER under the terms and conditions
// of the EULA.
//
// Unless required by applicable law or agreed to in writing, the reference design
// distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
// WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
// for the specific language governing permissions and limitations under the License.
//
// Additional rights, including the ability to physically implement a softcore that
// is compliant with the required sections of the Power ISA Specification, are
// available at no cost under the terms of the OpenPOWER Power ISA EULA, which can be
// obtained (along with the Power ISA) here: https://openpowerfoundation.org.
`timescale 1 ns / 1 ns
`include "tri_a2o.vh"
module fu_add(
vdd,
gnd,
clkoff_b,
act_dis,
flush,
delay_lclkr,
mpw1_b,
mpw2_b,
sg_1,
thold_1,
fpu_enable,
nclk,
f_add_si,
f_add_so,
ex2_act_b,
f_sa3_ex4_s,
f_sa3_ex4_c,
f_alg_ex4_frc_sel_p1,
f_alg_ex4_sticky,
f_alg_ex3_effsub_eac_b,
f_alg_ex3_prod_z,
f_pic_ex4_is_gt,
f_pic_ex4_is_lt,
f_pic_ex4_is_eq,
f_pic_ex4_is_nan,
f_pic_ex4_cmp_sgnpos,
f_pic_ex4_cmp_sgnneg,
f_add_ex5_res,
f_add_ex5_flag_nan,
f_add_ex5_flag_gt,
f_add_ex5_flag_lt,
f_add_ex5_flag_eq,
f_add_ex5_fpcc_iu,
f_add_ex5_sign_carry,
f_add_ex5_to_int_ovf_wd,
f_add_ex5_to_int_ovf_dw,
f_add_ex5_sticky
);
// parameter expand_type = 2; // 0 - ibm tech, 1 - other );
inout vdd;
inout gnd;
input clkoff_b; // tiup
input act_dis; // ??tidn??
input flush; // ??tidn??
input [3:4] delay_lclkr; // tidn,
input [3:4] mpw1_b; // tidn,
input [0:0] mpw2_b; // tidn,
input sg_1;
input thold_1;
input fpu_enable; //dc_act
input [0:`NCLK_WIDTH-1] nclk;
input f_add_si; //perv
output f_add_so; //perv
input ex2_act_b; //act
input [0:162] f_sa3_ex4_s; // data
input [53:161] f_sa3_ex4_c; // data
input f_alg_ex4_frc_sel_p1; // rounding converts
input f_alg_ex4_sticky; // part of eac control
input f_alg_ex3_effsub_eac_b; // already shut off for algByp
input f_alg_ex3_prod_z;
input f_pic_ex4_is_gt; // compare
input f_pic_ex4_is_lt; // compare
input f_pic_ex4_is_eq; // compare
input f_pic_ex4_is_nan; // compare
input f_pic_ex4_cmp_sgnpos; // compare
input f_pic_ex4_cmp_sgnneg; // compare
output [0:162] f_add_ex5_res; // RESULT
output f_add_ex5_flag_nan; // compare for fpscr
output f_add_ex5_flag_gt; // compare for fpscr
output f_add_ex5_flag_lt; // compare for fpscr
output f_add_ex5_flag_eq; // compare for fpscr
output [0:3] f_add_ex5_fpcc_iu; // compare for iu
output f_add_ex5_sign_carry; // select sign from product/addend
output [0:1] f_add_ex5_to_int_ovf_wd; // raw data
output [0:1] f_add_ex5_to_int_ovf_dw; // raw data
output f_add_ex5_sticky; // for nrm
parameter tiup = 1'b1;
parameter tidn = 1'b0;
////#################################
////# sigdef : non-functional
////#################################
wire thold_0_b;
wire thold_0;
wire sg_0;
wire force_t;
wire ex2_act;
wire ex3_act;
wire ex4_act;
wire [0:8] act_si;
wire [0:8] act_so;
wire [0:162] ex5_res_so;
wire [0:162] ex5_res_si;
wire [0:9] ex5_cmp_so;
wire [0:9] ex5_cmp_si;
wire [0:3] spare_unused;
////#################################
////# sigdef : functional
////#################################
wire [0:162] ex4_s;
wire [53:161] ex4_c;
wire ex4_flag_nan;
wire ex4_flag_gt;
wire ex4_flag_lt;
wire ex4_flag_eq;
wire ex4_sign_carry;
wire ex4_inc_all1;
wire [1:6] ex4_inc_byt_c_glb;
wire [1:6] ex4_inc_byt_c_glb_b;
wire [0:52] ex4_inc_p1;
wire [0:52] ex4_inc_p0;
wire [53:162] ex4_s_p0;
wire [53:162] ex4_s_p1;
wire [0:162] ex4_res;
wire ex3_effsub;
wire ex4_effsub;
wire ex3_effadd_npz;
wire ex3_effsub_npz;
wire ex4_effsub_npz;
wire ex4_effadd_npz;
wire ex4_flip_inc_p0;
wire ex4_flip_inc_p1;
wire ex4_inc_sel_p0;
wire ex4_inc_sel_p1;
wire [0:162] ex5_res;
wire [0:162] ex5_res_b;
wire [0:162] ex5_res_l2_b;
wire ex5_flag_nan_b;
wire ex5_flag_gt_b;
wire ex5_flag_lt_b;
wire ex5_flag_eq_b;
wire [0:3] ex5_fpcc_iu_b;
wire ex5_sign_carry_b;
wire ex5_sticky_b;
wire [0:6] ex4_g16;
wire [0:6] ex4_t16;
wire [1:6] ex4_g128;
wire [1:6] ex4_t128;
wire [1:6] ex4_g128_b;
wire [1:6] ex4_t128_b;
wire [0:6] ex4_inc_byt_c_b;
wire [0:6] ex4_eac_sel_p0n;
wire [0:6] ex4_eac_sel_p0;
wire [0:6] ex4_eac_sel_p1;
wire ex4_flag_nan_cp1;
wire ex4_flag_gt_cp1;
wire ex4_flag_lt_cp1;
wire ex4_flag_eq_cp1;
wire add_ex5_d1clk;
wire add_ex5_d2clk;
wire [0:`NCLK_WIDTH-1] add_ex5_lclk;
wire [53:162] ex4_s_p0n;
wire [53:162] ex4_res_p0n_b;
wire [53:162] ex4_res_p0_b;
wire [53:162] ex4_res_p1_b;
wire [0:52] ex4_inc_p0_x;
wire [0:52] ex4_inc_p1_x;
wire [0:52] ex4_incx_p0_b;
wire [0:52] ex4_incx_p1_b;
wire [53:162] ex4_sel_a1;
wire [53:162] ex4_sel_a2;
wire [53:162] ex4_sel_a3;
////################################################################
////# pervasive
////################################################################
tri_plat thold_reg_0(
.vd(vdd),
.gd(gnd),
.nclk(nclk),
.flush(flush),
.din(thold_1),
.q(thold_0)
);
tri_plat sg_reg_0(
.vd(vdd),
.gd(gnd),
.nclk(nclk),
.flush(flush),
.din(sg_1),
.q(sg_0)
);
tri_lcbor lcbor_0(
.clkoff_b(clkoff_b),
.thold(thold_0),
.sg(sg_0),
.act_dis(act_dis),
.force_t(force_t),
.thold_b(thold_0_b)
);
////################################################################
////# act
////################################################################
assign ex2_act = (~ex2_act_b);
assign ex3_effsub = (~f_alg_ex3_effsub_eac_b);
assign ex3_effsub_npz = (~f_alg_ex3_effsub_eac_b) & (~f_alg_ex3_prod_z);
assign ex3_effadd_npz = f_alg_ex3_effsub_eac_b & (~f_alg_ex3_prod_z);
tri_rlmreg_p #(.WIDTH(9), .NEEDS_SRESET(0)) act_lat(
.force_t(force_t), //i-- tidn,
.d_mode(tiup),
.delay_lclkr(delay_lclkr[3]), //i-- tidn,
.mpw1_b(mpw1_b[3]), //i-- tidn,
.mpw2_b(mpw2_b[0]), //i-- tidn,
.nclk(nclk),
.act(fpu_enable),
.thold_b(thold_0_b),
.sg(sg_0),
.vd(vdd),
.gd(gnd),
.scout(act_so),
.scin(act_si),
//-----------------
.din({ spare_unused[0],
spare_unused[1],
ex2_act,
ex3_act,
ex3_effsub,
ex3_effsub_npz,
ex3_effadd_npz,
spare_unused[2],
spare_unused[3]}),
//-----------------
.dout({ spare_unused[0],
spare_unused[1],
ex3_act,
ex4_act,
ex4_effsub,
ex4_effsub_npz,
ex4_effadd_npz,
spare_unused[2],
spare_unused[3]})
);
tri_lcbnd add_ex5_lcb(
.delay_lclkr(delay_lclkr[4]), // tidn ,--in
.mpw1_b(mpw1_b[4]), // tidn ,--in
.mpw2_b(mpw2_b[0]), // tidn ,--in
.force_t(force_t), // tidn ,--in
.nclk(nclk), //in
.vd(vdd), //inout
.gd(gnd), //inout
.act(ex4_act), //in
.sg(sg_0), //in
.thold_b(thold_0_b), //in
.d1clk(add_ex5_d1clk), //out
.d2clk(add_ex5_d2clk), //out
.lclk(add_ex5_lclk) //out
);
////################################################################
////# ex4 logic
////################################################################
assign ex4_s[0:162] = f_sa3_ex4_s[0:162];
assign ex4_c[53:161] = f_sa3_ex4_c[53:161];
//ex4 incrementer-----------------------------------------
//ex4 incr (global carry)---------------------------------
fu_add_all1 all1(
.ex4_inc_byt_c_b(ex4_inc_byt_c_b[0:6]), //i--
.ex4_inc_byt_c_glb(ex4_inc_byt_c_glb[1:6]), //o--
.ex4_inc_byt_c_glb_b(ex4_inc_byt_c_glb_b[1:6]), //o--
.ex4_inc_all1(ex4_inc_all1) //o--
);
//ex4 incr (byte sections) -------------------------------------------------
fu_loc8inc_lsb inc8_6(
.co_b(ex4_inc_byt_c_b[6]), //o--
.x(ex4_s[48:52]), //i--
.s0(ex4_inc_p0[48:52]), //o--
.s1(ex4_inc_p1[48:52]) //o--
);
fu_loc8inc inc8_5(
.ci(ex4_inc_byt_c_glb[6]), //i--
.ci_b(ex4_inc_byt_c_glb_b[6]), //i--
.co_b(ex4_inc_byt_c_b[5]), //o--
.x(ex4_s[40:47]), //i--
.s0(ex4_inc_p0[40:47]), //o--
.s1(ex4_inc_p1[40:47]) //o--
);
fu_loc8inc inc8_4(
.ci(ex4_inc_byt_c_glb[5]), //i--
.ci_b(ex4_inc_byt_c_glb_b[5]), //i--
.co_b(ex4_inc_byt_c_b[4]), //o--
.x(ex4_s[32:39]), //i--
.s0(ex4_inc_p0[32:39]), //o--
.s1(ex4_inc_p1[32:39]) //o--
);
fu_loc8inc inc8_3(
.ci(ex4_inc_byt_c_glb[4]), //i--
.ci_b(ex4_inc_byt_c_glb_b[4]), //i--
.co_b(ex4_inc_byt_c_b[3]), //o--
.x(ex4_s[24:31]), //i--
.s0(ex4_inc_p0[24:31]), //o--
.s1(ex4_inc_p1[24:31]) //o--
);
fu_loc8inc inc8_2(
.ci(ex4_inc_byt_c_glb[3]), //i--
.ci_b(ex4_inc_byt_c_glb_b[3]), //i--
.co_b(ex4_inc_byt_c_b[2]), //o--
.x(ex4_s[16:23]), //i--
.s0(ex4_inc_p0[16:23]), //o--
.s1(ex4_inc_p1[16:23]) //o--
);
fu_loc8inc inc8_1(
.ci(ex4_inc_byt_c_glb[2]), //i--
.ci_b(ex4_inc_byt_c_glb_b[2]), //i--
.co_b(ex4_inc_byt_c_b[1]), //o--
.x(ex4_s[8:15]), //i--
.s0(ex4_inc_p0[8:15]), //o--
.s1(ex4_inc_p1[8:15]) //o--
);
fu_loc8inc inc8_0(
.ci(ex4_inc_byt_c_glb[1]), //i--
.ci_b(ex4_inc_byt_c_glb_b[1]), //i--
.co_b(ex4_inc_byt_c_b[0]), //o--
.x(ex4_s[0:7]), //i--
.s0(ex4_inc_p0[0:7]), //o--
.s1(ex4_inc_p1[0:7]) //o--
);
//ex4 adder-----------------------------------------------
// sum[53] is the raw aligner bit
// car[53] includes the bogus bit
// position 53 also includes a "1" to push out the bogus bit
//
// [0:52] needs "111...111" to push out the bogus bit
// but the first co of [53] is suppressed instead
//
// ex4_53 => s53, c53, "1", ci : 2nd co : s53 * c53 * ci
// sums
// [0] 053:068
// [1] 069:084
// [2] 085:100
// [3] 101:116
// [4] 117:132
// [5] 133:148
// [6] 149:164 <162,"1","1">
fu_hc16pp_msb hc16_0(
.x(ex4_s[53:68]), //i--
.y(ex4_c[53:68]), //i--
.ci0(ex4_g128[1]), //i--
.ci0_b(ex4_g128_b[1]), //i--
.ci1(ex4_t128[1]), //i--
.ci1_b(ex4_t128_b[1]), //i--
.s0(ex4_s_p0[53:68]), //o--
.s1(ex4_s_p1[53:68]), //o--
.g16(ex4_g16[0]), //o--
.t16(ex4_t16[0]) //o--
);
fu_hc16pp hc16_1(
.x(ex4_s[69:84]), //i--
.y(ex4_c[69:84]), //i--
.ci0(ex4_g128[2]), //i--
.ci0_b(ex4_g128_b[2]), //i--
.ci1(ex4_t128[2]), //i--
.ci1_b(ex4_t128_b[2]), //i--
.s0(ex4_s_p0[69:84]), //o--
.s1(ex4_s_p1[69:84]), //o--
.g16(ex4_g16[1]), //o--
.t16(ex4_t16[1]) //o--
);
fu_hc16pp hc16_2(
.x(ex4_s[85:100]), //i--
.y(ex4_c[85:100]), //i--
.ci0(ex4_g128[3]), //i--
.ci0_b(ex4_g128_b[3]), //i--
.ci1(ex4_t128[3]), //i--
.ci1_b(ex4_t128_b[3]), //i--
.s0(ex4_s_p0[85:100]), //o--
.s1(ex4_s_p1[85:100]), //o--
.g16(ex4_g16[2]), //o--
.t16(ex4_t16[2]) //o--
);
fu_hc16pp hc16_3(
.x(ex4_s[101:116]), //i--
.y(ex4_c[101:116]), //i--
.ci0(ex4_g128[4]), //i--
.ci0_b(ex4_g128_b[4]), //i--
.ci1(ex4_t128[4]), //i--
.ci1_b(ex4_t128_b[4]), //i--
.s0(ex4_s_p0[101:116]), //o--
.s1(ex4_s_p1[101:116]), //o--
.g16(ex4_g16[3]), //o--
.t16(ex4_t16[3]) //o--
);
fu_hc16pp hc16_4(
.x(ex4_s[117:132]), //i--
.y(ex4_c[117:132]), //i--
.ci0(ex4_g128[5]), //i--
.ci0_b(ex4_g128_b[5]), //i--
.ci1(ex4_t128[5]), //i--
.ci1_b(ex4_t128_b[5]), //i--
.s0(ex4_s_p0[117:132]), //o--
.s1(ex4_s_p1[117:132]), //o--
.g16(ex4_g16[4]), //o--
.t16(ex4_t16[4]) //o--
);
fu_hc16pp hc16_5(
.x(ex4_s[133:148]), //i--
.y(ex4_c[133:148]), //i--
.ci0(ex4_g128[6]), //i--
.ci0_b(ex4_g128_b[6]), //i--
.ci1(ex4_t128[6]), //i--
.ci1_b(ex4_t128_b[6]), //i--
.s0(ex4_s_p0[133:148]), //o--
.s1(ex4_s_p1[133:148]), //o--
.g16(ex4_g16[5]), //o--
.t16(ex4_t16[5]) //o--
);
fu_hc16pp_lsb hc16_6(
.x(ex4_s[149:162]), //i--
.y(ex4_c[149:161]), //i--
.s0(ex4_s_p0[149:162]), //o--
.s1(ex4_s_p1[149:162]), //o--
.g16(ex4_g16[6]), //o--
.t16(ex4_t16[6]) //o--
);
//=#########################################################################################
//=## EACMUX (move the nand3 into technology dependent latch ... latch not yet available)
//=#########################################################################################
//------------------------------------------------
// EACMUX: incrementer bits
//------------------------------------------------
assign ex4_inc_p0_x[0:52] = ex4_inc_p0[0:52] ^ {53{ex4_flip_inc_p0}};
assign ex4_inc_p1_x[0:52] = ex4_inc_p1[0:52] ^ {53{ex4_flip_inc_p1}};
assign ex4_incx_p0_b[0:52] = (~({53{ex4_inc_sel_p0}} & ex4_inc_p0_x[0:52]));
assign ex4_incx_p1_b[0:52] = (~({53{ex4_inc_sel_p1}} & ex4_inc_p1_x[0:52]));
assign ex4_res[0:52] = (~(ex4_incx_p0_b[0:52] & ex4_incx_p1_b[0:52]));
//------------------------------------------------
// EACMUX: adder bits
//------------------------------------------------
assign ex4_sel_a1[53:68] = {16{ex4_eac_sel_p0n[0]}}; //rename
assign ex4_sel_a1[69:84] = {16{ex4_eac_sel_p0n[1]}}; //rename
assign ex4_sel_a1[85:100] = {16{ex4_eac_sel_p0n[2]}}; //rename
assign ex4_sel_a1[101:116] = {16{ex4_eac_sel_p0n[3]}}; //rename
assign ex4_sel_a1[117:132] = {16{ex4_eac_sel_p0n[4]}}; //rename
assign ex4_sel_a1[133:148] = {16{ex4_eac_sel_p0n[5]}}; //rename
assign ex4_sel_a1[149:162] = {14{ex4_eac_sel_p0n[6]}}; //rename
assign ex4_sel_a2[53:68] = {16{ex4_eac_sel_p0[0]}}; //rename
assign ex4_sel_a2[69:84] = {16{ex4_eac_sel_p0[1]}}; //rename
assign ex4_sel_a2[85:100] = {16{ex4_eac_sel_p0[2]}}; //rename
assign ex4_sel_a2[101:116] = {16{ex4_eac_sel_p0[3]}}; //rename
assign ex4_sel_a2[117:132] = {16{ex4_eac_sel_p0[4]}}; //rename
assign ex4_sel_a2[133:148] = {16{ex4_eac_sel_p0[5]}}; //rename
assign ex4_sel_a2[149:162] = {14{ex4_eac_sel_p0[6]}}; //rename
assign ex4_sel_a3[53:68] = {16{ex4_eac_sel_p1[0]}}; //rename
assign ex4_sel_a3[69:84] = {16{ex4_eac_sel_p1[1]}}; //rename
assign ex4_sel_a3[85:100] = {16{ex4_eac_sel_p1[2]}}; //rename
assign ex4_sel_a3[101:116] = {16{ex4_eac_sel_p1[3]}}; //rename
assign ex4_sel_a3[117:132] = {16{ex4_eac_sel_p1[4]}}; //rename
assign ex4_sel_a3[133:148] = {16{ex4_eac_sel_p1[5]}}; //rename
assign ex4_sel_a3[149:162] = {14{ex4_eac_sel_p1[6]}}; //rename
assign ex4_s_p0n[53:162] = (~(ex4_s_p0[53:162]));
assign ex4_res_p0n_b[53:162] = (~(ex4_sel_a1[53:162] & ex4_s_p0n[53:162]));
assign ex4_res_p0_b[53:162] = (~(ex4_sel_a2[53:162] & ex4_s_p0[53:162]));
assign ex4_res_p1_b[53:162] = (~(ex4_sel_a3[53:162] & ex4_s_p1[53:162]));
assign ex4_res[53:162] = (~(ex4_res_p0n_b[53:162] & ex4_res_p0_b[53:162] & ex4_res_p1_b[53:162]));
//=##################################################################################
//=# global carry chain, eac_selects, compare, sign_carry
//=##################################################################################
fu_add_glbc glbc(
.ex4_g16(ex4_g16[0:6]), //i--
.ex4_t16(ex4_t16[0:6]), //i--
.ex4_inc_all1(ex4_inc_all1), //i--
.ex4_effsub(ex4_effsub), //i--
.ex4_effsub_npz(ex4_effsub_npz), //i--
.ex4_effadd_npz(ex4_effadd_npz), //i--
.f_alg_ex4_frc_sel_p1(f_alg_ex4_frc_sel_p1), //i--
.f_alg_ex4_sticky(f_alg_ex4_sticky), //i--
.f_pic_ex4_is_nan(f_pic_ex4_is_nan), //i--
.f_pic_ex4_is_gt(f_pic_ex4_is_gt), //i--
.f_pic_ex4_is_lt(f_pic_ex4_is_lt), //i--
.f_pic_ex4_is_eq(f_pic_ex4_is_eq), //i--
.f_pic_ex4_cmp_sgnpos(f_pic_ex4_cmp_sgnpos), //i--
.f_pic_ex4_cmp_sgnneg(f_pic_ex4_cmp_sgnneg), //i--
.ex4_g128(ex4_g128[1:6]), //o--
.ex4_g128_b(ex4_g128_b[1:6]), //o--
.ex4_t128(ex4_t128[1:6]), //o--
.ex4_t128_b(ex4_t128_b[1:6]), //o--
.ex4_flip_inc_p0(ex4_flip_inc_p0), //o--
.ex4_flip_inc_p1(ex4_flip_inc_p1), //o--
.ex4_inc_sel_p0(ex4_inc_sel_p0), //o--
.ex4_inc_sel_p1(ex4_inc_sel_p1), //o--
.ex4_eac_sel_p0n(ex4_eac_sel_p0n), //o--
.ex4_eac_sel_p0(ex4_eac_sel_p0), //o--
.ex4_eac_sel_p1(ex4_eac_sel_p1), //o--
.ex4_sign_carry(ex4_sign_carry), //o--
.ex4_flag_nan_cp1(ex4_flag_nan_cp1), //o-- duplicate lat driven by unique gate
.ex4_flag_gt_cp1(ex4_flag_gt_cp1), //o-- duplicate lat driven by unique gate
.ex4_flag_lt_cp1(ex4_flag_lt_cp1), //o-- duplicate lat driven by unique gate
.ex4_flag_eq_cp1(ex4_flag_eq_cp1), //o-- duplicate lat driven by unique gate
.ex4_flag_nan(ex4_flag_nan), //o--
.ex4_flag_gt(ex4_flag_gt), //o--
.ex4_flag_lt(ex4_flag_lt), //o--
.ex4_flag_eq(ex4_flag_eq) //o--
);
////################################################################
////# ex5 latches
////################################################################
tri_inv_nlats #(.WIDTH(53), .NEEDS_SRESET(0)) ex5_res_hi_lat(
.vd(vdd),
.gd(gnd),
.lclk(add_ex5_lclk), // lclk.clk
.d1clk(add_ex5_d1clk),
.d2clk(add_ex5_d2clk),
.scanin(ex5_res_si[0:52]),
.scanout(ex5_res_so[0:52]),
.d(ex4_res[0:52]),
.qb(ex5_res_l2_b[0:52]) //LAT
);
tri_inv_nlats #(.WIDTH(110), .NEEDS_SRESET(0)) ex5_res_lo_lat(
.vd(vdd),
.gd(gnd),
.lclk(add_ex5_lclk), // lclk.clk
.d1clk(add_ex5_d1clk),
.d2clk(add_ex5_d2clk),
.scanin(ex5_res_si[53:162]),
.scanout(ex5_res_so[53:162]),
.d(ex4_res[53:162]),
.qb(ex5_res_l2_b[53:162]) //LAT
);
assign ex5_res[0:162] = (~ex5_res_l2_b[0:162]);
assign ex5_res_b[0:162] = (~ex5_res[0:162]);
assign f_add_ex5_res[0:162] = (~ex5_res_b[0:162]); // output
tri_inv_nlats #(.WIDTH(10), .NEEDS_SRESET(0)) ex5_cmp_lat(
.vd(vdd),
.gd(gnd),
.lclk(add_ex5_lclk), // lclk.clk
.d1clk(add_ex5_d1clk),
.d2clk(add_ex5_d2clk),
.scanin(ex5_cmp_si),
.scanout(ex5_cmp_so),
//-----------------
.d({ ex4_flag_lt,
ex4_flag_lt_cp1,
ex4_flag_gt,
ex4_flag_gt_cp1,
ex4_flag_eq,
ex4_flag_eq_cp1,
ex4_flag_nan,
ex4_flag_nan_cp1,
ex4_sign_carry,
f_alg_ex4_sticky}),
//-----------------
.qb({ ex5_flag_lt_b, //LAT
ex5_fpcc_iu_b[0], //LAT
ex5_flag_gt_b, //LAT
ex5_fpcc_iu_b[1], //LAT
ex5_flag_eq_b, //LAT
ex5_fpcc_iu_b[2], //LAT
ex5_flag_nan_b, //LAT
ex5_fpcc_iu_b[3], //LAT
ex5_sign_carry_b, //LAT
ex5_sticky_b}) //LAT
);
assign f_add_ex5_flag_nan = (~ex5_flag_nan_b); //output
assign f_add_ex5_flag_gt = (~ex5_flag_gt_b); //output
assign f_add_ex5_flag_lt = (~ex5_flag_lt_b); //output
assign f_add_ex5_flag_eq = (~ex5_flag_eq_b); //output
assign f_add_ex5_fpcc_iu[0:3] = (~ex5_fpcc_iu_b[0:3]); //output
assign f_add_ex5_sign_carry = (~ex5_sign_carry_b); //output
assign f_add_ex5_sticky = (~ex5_sticky_b); //output
assign f_add_ex5_to_int_ovf_wd[0] = ex5_res[130]; //output
assign f_add_ex5_to_int_ovf_wd[1] = ex5_res[131]; //output
assign f_add_ex5_to_int_ovf_dw[0] = ex5_res[98]; //output
assign f_add_ex5_to_int_ovf_dw[1] = ex5_res[99]; //output
////################################################################
////# ex5 logic
////################################################################
////################################################################
////# scan string
////################################################################
assign act_si[0:8] = {act_so[1:8], f_add_si};
assign ex5_res_si[0:162] = {ex5_res_so[1:162], act_so[0]};
assign ex5_cmp_si[0:9] = {ex5_cmp_so[1:9], ex5_res_so[0]};
assign f_add_so = ex5_cmp_so[0];
endmodule