You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

143 lines
5.3 KiB
Verilog

2 years ago
// © IBM Corp. 2020
// Licensed under the Apache License, Version 2.0 (the "License"), as modified by
// the terms below; you may not use the files in this repository except in
// compliance with the License as modified.
// You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0
//
// Modified Terms:
//
// 1) For the purpose of the patent license granted to you in Section 3 of the
// License, the "Work" hereby includes implementations of the work of authorship
// in physical form.
//
// 2) Notwithstanding any terms to the contrary in the License, any licenses
// necessary for implementation of the Work that are available from OpenPOWER
// via the Power ISA End User License Agreement (EULA) are explicitly excluded
// hereunder, and may be obtained from OpenPOWER under the terms and conditions
// of the EULA.
//
// Unless required by applicable law or agreed to in writing, the reference design
// distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
// WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
// for the specific language governing permissions and limitations under the License.
//
// Additional rights, including the ability to physically implement a softcore that
// is compliant with the required sections of the Power ISA Specification, are
// available at no cost under the terms of the OpenPOWER Power ISA EULA, which can be
// obtained (along with the Power ISA) here: https://openpowerfoundation.org.
`timescale 1 ns / 1 ns
// *!****************************************************************
// *! FILENAME : tri_err_rpt.v
// *! DESCRIPTION : Error Reporting Component
// *!****************************************************************
`include "tri.vh"
module tri_err_rpt(
vd,
gd,
err_d1clk,
err_d2clk,
err_lclk,
err_scan_in,
err_scan_out,
mode_dclk,
mode_lclk,
mode_scan_in,
mode_scan_out,
err_in,
err_out,
hold_out,
mask_out
);
parameter WIDTH = 1; // number of errors of the same type
parameter MASK_RESET_VALUE = 1'b0; // use to set default/flush value for mask bits
parameter INLINE = 1'b0; // make hold latch be inline; err_out is sticky -- default to shadow
parameter SHARE_MASK = 1'b0; // PERMISSION NEEDED for true
// used for WIDTH >1 to reduce area of mask (common error disable)
parameter USE_NLATS = 1'b0; // only necessary in standby area to be able to reset to init value
parameter NEEDS_SRESET = 1; // for inferred latches
inout vd;
inout gd;
input err_d1clk; // caution1: if lcb uses powersavings, errors must always get reported
input err_d2clk; // caution2: if use_nlats is used these are also the clocks for the mask latches
input [0:`NCLK_WIDTH-1] err_lclk; // caution2: hence these have to be the mode clocks
// caution2: and all bits in the "func" chain have to be connected to the mode chain
// error scan chain (func or mode)
input [0:WIDTH-1] err_scan_in; // NOTE: connected to mode or func ring
output [0:WIDTH-1] err_scan_out;
// clock gateable mode clocks
input mode_dclk;
input [0:`NCLK_WIDTH-1] mode_lclk;
// mode scan chain
input [0:WIDTH-1] mode_scan_in;
output [0:WIDTH-1] mode_scan_out;
input [0:WIDTH-1] err_in;
output [0:WIDTH-1] err_out;
output [0:WIDTH-1] hold_out; // sticky error hold latch for trap usage
output [0:WIDTH-1] mask_out;
// tri_err_rpt
parameter [0:WIDTH-1] mask_initv = MASK_RESET_VALUE;
wire [0:WIDTH-1] hold_in;
wire [0:WIDTH-1] hold_lt;
wire [0:WIDTH-1] mask_lt;
(* analysis_not_referenced="true" *)
wire unused;
wire [0:WIDTH-1] unused_q_b;
// hold latches
assign hold_in = err_in | hold_lt;
tri_nlat_scan #(.WIDTH(WIDTH), .NEEDS_SRESET(NEEDS_SRESET))
hold(
.vd(vd),
.gd(gd),
.d1clk(err_d1clk),
.d2clk(err_d2clk),
.lclk(err_lclk),
.scan_in(err_scan_in[0:WIDTH - 1]),
.scan_out(err_scan_out[0:WIDTH - 1]),
.din(hold_in),
.q(hold_lt),
.q_b(unused_q_b)
);
generate
begin
// mask
if (SHARE_MASK == 1'b0)
begin : m
assign mask_lt = mask_initv;
end
if (SHARE_MASK == 1'b1)
begin : sm
assign mask_lt = {WIDTH{MASK_RESET_VALUE[0]}};
end
assign mode_scan_out = {WIDTH{1'b0}};
// assign outputs
assign hold_out = hold_lt;
assign mask_out = mask_lt;
if (INLINE == 1'b1)
begin : inline_hold
assign err_out = hold_lt & (~mask_lt);
end
if (INLINE == 1'b0)
begin : side_hold
assign err_out = err_in & (~mask_lt);
end
assign unused = | {mode_dclk, mode_lclk, mode_scan_in, unused_q_b};
end
endgenerate
endmodule