You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

114 lines
4.3 KiB
Verilog

// © IBM Corp. 2020
// Licensed under the Apache License, Version 2.0 (the "License"), as modified by
// the terms below; you may not use the files in this repository except in
// compliance with the License as modified.
// You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0
//
// Modified Terms:
//
// 1) For the purpose of the patent license granted to you in Section 3 of the
// License, the "Work" hereby includes implementations of the work of authorship
// in physical form.
//
// 2) Notwithstanding any terms to the contrary in the License, any licenses
// necessary for implementation of the Work that are available from OpenPOWER
// via the Power ISA End User License Agreement (EULA) are explicitly excluded
// hereunder, and may be obtained from OpenPOWER under the terms and conditions
// of the EULA.
//
// Unless required by applicable law or agreed to in writing, the reference design
// distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
// WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
// for the specific language governing permissions and limitations under the License.
//
// Additional rights, including the ability to physically implement a softcore that
// is compliant with the required sections of the Power ISA Specification, are
// available at no cost under the terms of the OpenPOWER Power ISA EULA, which can be
// obtained (along with the Power ISA) here: https://openpowerfoundation.org.
`timescale 1 ns / 1 ns
// *!****************************************************************
// *! FILENAME : tri_rlmlatch_p.v
// *! DESCRIPTION : 1-bit latch, LCB included
// *!****************************************************************
`include "tri_a2o.vh"
module tri_rlmlatch_p(vd, gd, nclk, act, force_t, thold_b, d_mode, sg, delay_lclkr, mpw1_b, mpw2_b, scin, din, scout, dout);
parameter INIT = 0; // will be converted to the least signficant
// 31 bits of init_v
parameter IBUF = 1'b0; //inverted latch IOs, if set to true.
parameter DUALSCAN = ""; // if "S", marks data ports as scan for Moebius
parameter NEEDS_SRESET = 1; // for inferred latches
parameter DOMAIN_CROSSING = 0;
inout vd;
inout gd;
input [0:`NCLK_WIDTH-1] nclk;
input act; // 1: functional, 0: no clock
input force_t; // 1: force LCB active
input thold_b; // 1: functional, 0: no clock
input d_mode; // 1: disable pulse mode, 0: pulse mode
input sg; // 0: functional, 1: scan
input delay_lclkr; // 0: functional
input mpw1_b; // pulse width control bit
input mpw2_b; // pulse width control bit
input scin; // scan in
input din; // data in
output scout; // scan out
output dout; // data out
parameter WIDTH = 1;
parameter [0:WIDTH-1] init_v = INIT;
// tri_rlmlatch_p
generate
begin
wire sreset;
wire int_din;
reg int_dout;
(* analysis_not_referenced="true" *)
wire unused;
if (NEEDS_SRESET == 1)
begin : rst
assign sreset = nclk[1];
end
if (NEEDS_SRESET != 1)
begin : no_rst
assign sreset = 1'b0;
end
if (IBUF == 1'b1)
begin : cib
assign int_din = ((~sreset) & (~din)) | (sreset & init_v[0]);
end
if (IBUF == 1'b0)
begin : cnib
assign int_din = ((~sreset) & din) | (sreset & init_v[0]);
end
always @(posedge nclk[0])
begin: l
int_dout <= ((((act | force_t) & thold_b) | sreset) & int_din) | ((((~act) & (~force_t)) | (~thold_b)) & (~sreset) & int_dout);
end
if (IBUF == 1'b1)
begin : cob
assign dout = (~int_dout);
end
if (IBUF == 1'b0)
begin : cnob
assign dout = int_dout;
end
assign scout = 1'b0;
assign unused = d_mode | sg | delay_lclkr | mpw1_b | mpw2_b | scin | vd | gd | (|nclk);
end
endgenerate
endmodule