You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
a2o/dev/verilog/trilib/tri_parity_recovery.v

816 lines
29 KiB
Verilog

// © IBM Corp. 2020
// Licensed under the Apache License, Version 2.0 (the "License"), as modified by
// the terms below; you may not use the files in this repository except in
// compliance with the License as modified.
// You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0
//
// Modified Terms:
//
// 1) For the purpose of the patent license granted to you in Section 3 of the
// License, the "Work" hereby includes implementations of the work of authorship
// in physical form.
//
// 2) Notwithstanding any terms to the contrary in the License, any licenses
// necessary for implementation of the Work that are available from OpenPOWER
// via the Power ISA End User License Agreement (EULA) are explicitly excluded
// hereunder, and may be obtained from OpenPOWER under the terms and conditions
// of the EULA.
//
// Unless required by applicable law or agreed to in writing, the reference design
// distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
// WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
// for the specific language governing permissions and limitations under the License.
//
// Additional rights, including the ability to physically implement a softcore that
// is compliant with the required sections of the Power ISA Specification, are
// available at no cost under the terms of the OpenPOWER Power ISA EULA, which can be
// obtained (along with the Power ISA) here: https://openpowerfoundation.org.
`timescale 1 ns / 1 ns
//*****************************************************************************
//*
//* TITLE: TRI_PARITY_RECOVERY
//*
//* NAME: tri_parity_recovery
//*
//*****************************************************************************
`include "tri_a2o.vh"
module tri_parity_recovery(
perr_si,
perr_so,
delay_lclkr,
mpw1_b,
mpw2_b,
nclk,
force_t,
thold_0_b,
sg_0,
gnd,
vdd,
ex3_hangcounter_trigger,
ex3_a_parity_check,
ex3_b_parity_check,
ex3_c_parity_check,
ex3_s_parity_check,
rf0_instr_fra,
rf0_instr_frb,
rf0_instr_frc,
rf0_tid,
rf0_dcd_fra,
rf0_dcd_frb,
rf0_dcd_frc,
rf0_dcd_tid,
ex1_instr_fra,
ex1_instr_frb,
ex1_instr_frc,
ex1_instr_frs,
ex3_fra_v,
ex3_frb_v,
ex3_frc_v,
ex3_str_v,
ex3_frs_byp,
ex3_fdivsqrt_start,
ex3_instr_v,
msr_fp_act,
cp_flush_1d,
ex7_is_fixperr,
xx_ex4_regfile_err_det,
xx_ex5_regfile_err_det,
xx_ex6_regfile_err_det,
xx_ex7_regfile_err_det,
xx_ex8_regfile_err_det,
xx_ex1_perr_sm_instr_v,
xx_ex2_perr_sm_instr_v,
xx_ex3_perr_sm_instr_v,
xx_ex4_perr_sm_instr_v,
xx_ex5_perr_sm_instr_v,
xx_ex6_perr_sm_instr_v,
xx_ex7_perr_sm_instr_v,
xx_ex8_perr_sm_instr_v,
xx_perr_sm_running,
xx_ex2_perr_force_c,
xx_ex2_perr_fsel_ovrd,
xx_perr_tid_l2,
xx_perr_sm_l2,
xx_perr_addr_l2,
ex3_sto_parity_err,
xx_rv_hold_all,
xx_ex0_regfile_ue,
xx_ex0_regfile_ce,
xx_pc_err_regfile_parity,
xx_pc_err_regfile_ue
);
parameter THREADS = 2;
input perr_si;
output perr_so;
input [0:9] delay_lclkr;
input [0:9] mpw1_b;
input [0:1] mpw2_b;
input [0:`NCLK_WIDTH-1] nclk;
input force_t;
input thold_0_b;
input sg_0;
inout gnd;
inout vdd;
input ex3_hangcounter_trigger;
input ex3_a_parity_check;
input ex3_b_parity_check;
input ex3_c_parity_check;
input ex3_s_parity_check;
input [0:5] rf0_instr_fra;
input [0:5] rf0_instr_frb;
input [0:5] rf0_instr_frc;
input [0:1] rf0_tid;
output [0:5] rf0_dcd_fra;
output [0:5] rf0_dcd_frb;
output [0:5] rf0_dcd_frc;
output [0:1] rf0_dcd_tid;
input [0:5] ex1_instr_fra;
input [0:5] ex1_instr_frb;
input [0:5] ex1_instr_frc;
input [0:5] ex1_instr_frs;
input ex3_fra_v;
input ex3_frb_v;
input ex3_frc_v;
input ex3_str_v;
input ex3_frs_byp;
input [0:1] ex3_fdivsqrt_start;
input [0:1] ex3_instr_v;
input msr_fp_act;
input [0:1] cp_flush_1d;
output ex7_is_fixperr;
output [0:1] xx_ex4_regfile_err_det;
output [0:1] xx_ex5_regfile_err_det;
output [0:1] xx_ex6_regfile_err_det;
output [0:1] xx_ex7_regfile_err_det;
output [0:1] xx_ex8_regfile_err_det;
output xx_ex1_perr_sm_instr_v;
output xx_ex2_perr_sm_instr_v;
output xx_ex3_perr_sm_instr_v;
output xx_ex4_perr_sm_instr_v;
output xx_ex5_perr_sm_instr_v;
output xx_ex6_perr_sm_instr_v;
output xx_ex7_perr_sm_instr_v;
output xx_ex8_perr_sm_instr_v;
output xx_perr_sm_running;
output xx_ex2_perr_force_c;
output xx_ex2_perr_fsel_ovrd;
output [0:1] xx_perr_tid_l2;
output [0:2] xx_perr_sm_l2;
output [0:5] xx_perr_addr_l2;
output ex3_sto_parity_err;
output xx_rv_hold_all;
output xx_ex0_regfile_ue;
output xx_ex0_regfile_ce;
output [0:`THREADS-1] xx_pc_err_regfile_parity;
output [0:`THREADS-1] xx_pc_err_regfile_ue;
// parity err ---------
(* analysis_not_referenced="TRUE" *) // unused
wire [0:2] spare_unused;
wire perr_sm_running;
wire [0:23] ex3_perr_si;
wire [0:23] ex3_perr_so;
wire [0:1] ex3_fpr_perr;
wire [0:1] ex3_fpr_reg_perr;
wire ex3_regfile_err_det_any;
wire ex3_capture_addr;
wire [0:1] ex4_regfile_err_det_din;
wire [0:1] ex5_regfile_err_det_din;
wire [0:1] ex6_regfile_err_det_din;
wire [0:1] ex7_regfile_err_det_din;
wire regfile_seq_beg;
wire regfile_seq_end;
wire ex4_regfile_err_det_any;
wire ex5_regfile_err_det_any;
wire ex6_regfile_err_det_any;
wire [0:1] ex4_sto_err_det;
wire [0:1] ex4_regfile_err_det;
wire [0:1] ex5_regfile_err_det;
wire [0:1] ex6_regfile_err_det;
wire [0:1] ex7_regfile_err_det;
wire [0:1] ex8_regfile_err_det;
wire ex3_f0a_perr;
wire ex3_f0c_perr;
wire ex3_f1b_perr;
wire ex3_f1s_perr;
wire [0:1] ex3_sto_perr;
wire [0:0] holdall_si;
wire [0:0] holdall_so;
wire rv_hold_all_din;
wire rv_hold_all_q;
wire [0:1] err_regfile_parity;
wire [0:1] err_regfile_ue;
wire [0:1] ex3_abc_perr;
wire [0:1] ex3_abc_perr_x;
wire [0:1] ex3_abc_perr_y;
wire ex1_perr_move_f0_to_f1;
wire ex1_perr_move_f1_to_f0;
wire ex0_regfile_ce;
wire ex0_regfile_ue;
wire [0:23] ex2_perr_si;
wire [0:23] ex2_perr_so;
wire [0:5] ex3_instr_fra;
wire [0:5] ex3_instr_frb;
wire [0:5] ex3_instr_frc;
wire [0:5] ex3_instr_frs;
wire [0:5] ex2_instr_fra;
wire [0:5] ex2_instr_frb;
wire [0:5] ex2_instr_frc;
wire [0:5] ex2_instr_frs;
wire new_perr_sm_instr_v;
wire rf0_perr_sm_instr_v;
wire rf0_perr_sm_instr_v_b;
wire ex0_perr_sm_instr_v;
wire ex1_perr_sm_instr_v;
wire ex2_perr_sm_instr_v;
wire ex3_perr_sm_instr_v;
wire ex4_perr_sm_instr_v;
wire ex5_perr_sm_instr_v;
wire ex6_perr_sm_instr_v;
wire ex7_perr_sm_instr_v;
wire ex8_perr_sm_instr_v;
wire rf0_perr_move_f0_to_f1;
wire rf0_perr_move_f1_to_f0;
wire rf0_perr_fixed_itself;
wire perr_move_f0_to_f1_l2;
wire perr_move_f1_to_f0_l2;
wire rf0_perr_force_c;
wire ex0_perr_force_c;
wire ex1_perr_force_c;
wire ex2_perr_force_c;
wire [0:5] perr_addr_din;
wire [0:5] perr_addr_l2;
wire [0:30] perr_ctl_si;
wire [0:30] perr_ctl_so;
wire perr_move_f0_to_f1;
wire perr_move_f1_to_f0;
wire [0:2] perr_sm_din;
wire [0:2] perr_sm_l2;
wire [0:2] perr_sm_ns;
wire [0:2] perr_sm_si;
wire [0:2] perr_sm_so;
wire [0:1] perr_tid_din;
wire [0:1] perr_tid_l2;
wire rf0_regfile_ce;
wire rf0_regfile_ue;
wire [0:3] ex4_ctl_perr_si;
wire [0:3] ex4_ctl_perr_so;
wire [0:8] exx_regfile_err_det_si;
wire [0:8] exx_regfile_err_det_so;
wire [0:5] rf0_frb_iu_x_b;
wire [0:5] rf0_frb_perr_x_b;
wire [0:5] rf0_frc_iu_x_b;
wire [0:5] rf0_frc_perr_x_b;
wire ex3_a_perr_check;
wire ex3_b_perr_check;
wire ex3_c_perr_check;
wire ex3_s_perr_check;
//------------- end parity
wire tilo;
wire tihi;
wire tidn;
wire tiup;
//-------------------------------------------------------------------------------------------------
assign tilo = 1'b0;
assign tihi = 1'b1;
assign tidn = 1'b0;
assign tiup = 1'b1;
//----------------------------------------------------------------------
// Parity State Machine / parity section
assign xx_ex4_regfile_err_det = ex4_regfile_err_det;
assign xx_ex5_regfile_err_det = ex5_regfile_err_det;
assign xx_ex6_regfile_err_det = ex6_regfile_err_det;
assign xx_ex7_regfile_err_det = ex7_regfile_err_det;
assign xx_ex8_regfile_err_det = ex8_regfile_err_det;
assign xx_ex1_perr_sm_instr_v = ex1_perr_sm_instr_v;
assign xx_ex2_perr_sm_instr_v = ex2_perr_sm_instr_v;
assign xx_ex3_perr_sm_instr_v = ex3_perr_sm_instr_v;
assign xx_ex4_perr_sm_instr_v = ex4_perr_sm_instr_v;
assign xx_ex5_perr_sm_instr_v = ex5_perr_sm_instr_v;
assign xx_ex6_perr_sm_instr_v = ex6_perr_sm_instr_v;
assign xx_ex7_perr_sm_instr_v = ex7_perr_sm_instr_v;
assign xx_ex8_perr_sm_instr_v = ex8_perr_sm_instr_v;
assign xx_perr_tid_l2 = perr_tid_l2;
assign xx_perr_sm_l2 = perr_sm_l2;
assign ex4_regfile_err_det_din[0:1] = ex4_regfile_err_det[0:1] & (~cp_flush_1d[0:1]);
assign ex5_regfile_err_det_din[0:1] = ex5_regfile_err_det[0:1] & (~cp_flush_1d[0:1]);
assign ex6_regfile_err_det_din[0:1] = ex6_regfile_err_det[0:1] & (~cp_flush_1d[0:1]);
assign ex7_regfile_err_det_din[0:1] = ex7_regfile_err_det[0:1] & (~cp_flush_1d[0:1]);
assign xx_ex0_regfile_ue = ex0_regfile_ue;
assign xx_ex0_regfile_ce = ex0_regfile_ce;
assign xx_perr_addr_l2 = perr_addr_l2;
tri_rlmreg_p #(.INIT(0), .WIDTH(9)) exx_regfile_err_det_lat(
.nclk(nclk),
.act(tihi),
.force_t(force_t),
.d_mode(tiup),
.delay_lclkr(delay_lclkr[9]),
.mpw1_b(mpw1_b[9]),
.mpw2_b(mpw2_b[1]),
.thold_b(thold_0_b),
.sg(sg_0),
.vd(vdd),
.gd(gnd),
.scin(exx_regfile_err_det_si[0:8]),
.scout(exx_regfile_err_det_so[0:8]),
//-------------------------------------------
.din({ ex4_regfile_err_det_din[0:1],
ex5_regfile_err_det_din[0:1],
ex6_regfile_err_det_din[0:1],
ex7_regfile_err_det_din[0:1],
ex6_perr_sm_instr_v
}),
//-------------------------------------------
.dout({ ex5_regfile_err_det[0:1],
ex6_regfile_err_det[0:1],
ex7_regfile_err_det[0:1],
ex8_regfile_err_det[0:1],
ex7_is_fixperr
})
);
//-------------------------------------------
tri_rlmreg_p #(.INIT(0), .WIDTH(4)) ex4_ctl_perr(
.nclk(nclk),
.act(tihi),
.force_t(force_t),
.d_mode(tiup),
.delay_lclkr(delay_lclkr[4]),
.mpw1_b(mpw1_b[4]),
.mpw2_b(mpw2_b[0]),
.thold_b(thold_0_b),
.sg(sg_0),
.vd(vdd),
.gd(gnd),
.scin(ex4_ctl_perr_si[0:3]),
.scout(ex4_ctl_perr_so[0:3]),
//-------------------------------------------
.din({
ex3_fpr_reg_perr[0:1],
ex3_sto_perr[0:1]
}),
//-------------------------------------------
.dout( {
ex4_regfile_err_det[0:1],
ex4_sto_err_det[0:1]
})
);
//-------------------------------------------
tri_rlmreg_p #(.INIT(0), .WIDTH(24)) ex2_perr(
.nclk(nclk),
.act(tiup),
.force_t(force_t),
.d_mode(tiup),
.delay_lclkr(delay_lclkr[2]),
.mpw1_b(mpw1_b[2]),
.mpw2_b(mpw2_b[0]),
.thold_b(thold_0_b),
.sg(sg_0),
.vd(vdd),
.gd(gnd),
.scin(ex2_perr_si[0:23]),
.scout(ex2_perr_so[0:23]),
.din({ex1_instr_frs[0:5],
ex1_instr_fra[0:5],
ex1_instr_frb[0:5],
ex1_instr_frc[0:5]
}),
//-------------------------------------------
.dout({ex2_instr_frs[0:5],
ex2_instr_fra[0:5],
ex2_instr_frb[0:5],
ex2_instr_frc[0:5]
})
);
//-------------------------------------------
tri_rlmreg_p #(.INIT(0), .WIDTH(24)) ex3_perr(
.nclk(nclk),
.act(tiup),
.force_t(force_t),
.d_mode(tiup),
.delay_lclkr(delay_lclkr[3]),
.mpw1_b(mpw1_b[3]),
.mpw2_b(mpw2_b[0]),
.thold_b(thold_0_b),
.sg(sg_0),
.vd(vdd),
.gd(gnd),
.scin(ex3_perr_si[0:23]),
.scout(ex3_perr_so[0:23]),
.din({ex2_instr_frs[0:5],
ex2_instr_fra[0:5],
ex2_instr_frb[0:5],
ex2_instr_frc[0:5]
}),
//-------------------------------------------
.dout( {ex3_instr_frs[0:5],
ex3_instr_fra[0:5],
ex3_instr_frb[0:5],
ex3_instr_frc[0:5]
})
);
//-------------------------------------------
// Parity Checking
assign ex3_a_perr_check = ex3_a_parity_check;
assign ex3_b_perr_check = ex3_b_parity_check;
assign ex3_c_perr_check = ex3_c_parity_check;
assign ex3_s_perr_check = ex3_s_parity_check;
assign ex3_sto_perr[0:1] = {2{(ex3_s_perr_check & ex3_str_v & ~ex3_frs_byp)}} & ex3_instr_v[0:1];
assign ex3_sto_parity_err = |(ex3_sto_perr);
assign ex3_abc_perr_x = {2{((ex3_a_perr_check & ex3_fra_v) |
(ex3_b_perr_check & ex3_frb_v) |
(ex3_c_perr_check & ex3_frc_v)) }};
assign ex3_abc_perr_y = (ex3_instr_v[0:1] | ex3_fdivsqrt_start[0:1]);
assign ex3_abc_perr[0:1] = ex3_abc_perr_x[0:1] & ex3_abc_perr_y[0:1];
assign ex3_fpr_perr[0:1] = (ex3_sto_perr[0:1] | ex3_abc_perr[0:1]) & (~cp_flush_1d[0:1]) & {2{msr_fp_act}};
assign ex3_regfile_err_det_any = |(ex3_fpr_perr);
assign ex3_fpr_reg_perr[0:1] = ( ex3_abc_perr[0:1]) & (~cp_flush_1d[0:1]) & {2{msr_fp_act}};
assign ex3_f0a_perr = ex3_a_perr_check & ex3_fra_v;
assign ex3_f0c_perr = ex3_c_perr_check & (ex3_frc_v | (perr_sm_l2[1] & ex3_perr_sm_instr_v));
assign ex3_f1b_perr = ex3_b_perr_check & (ex3_frb_v | (perr_sm_l2[1] & ex3_perr_sm_instr_v));
assign ex3_f1s_perr = ex3_s_perr_check & ex3_str_v;
assign ex4_regfile_err_det_any = |(ex4_regfile_err_det[0:1]) | |(ex4_sto_err_det[0:1]);
tri_rlmreg_p #(.INIT(4), .WIDTH(3)) perr_sm(
.nclk(nclk),
.act(tihi),
.force_t(force_t),
.d_mode(tiup),
.delay_lclkr(delay_lclkr[9]),
.mpw1_b(mpw1_b[9]),
.mpw2_b(mpw2_b[1]),
.thold_b(thold_0_b),
.sg(sg_0),
.vd(vdd),
.gd(gnd),
.scin(perr_sm_si[0:2]),
.scout(perr_sm_so[0:2]),
.din(perr_sm_din[0:2]),
//-------------------------------------------
.dout( perr_sm_l2[0:2])
);
//-------------------------------------------
tri_rlmreg_p #(.INIT(0), .WIDTH(31)) perr_ctl(
.nclk(nclk),
.act(tiup),
.force_t(force_t),
.d_mode(tiup),
.delay_lclkr(delay_lclkr[9]),
.mpw1_b(mpw1_b[9]),
.mpw2_b(mpw2_b[1]),
.thold_b(thold_0_b),
.sg(sg_0),
.vd(vdd),
.gd(gnd),
.scin(perr_ctl_si[0:30]),
.scout(perr_ctl_so[0:30]),
.din({ perr_addr_din[0:5],
perr_tid_din[0:1],
spare_unused[0:1],
perr_move_f0_to_f1,
perr_move_f1_to_f0,
rf0_perr_force_c,
ex0_perr_force_c,
ex1_perr_force_c,
new_perr_sm_instr_v,
rf0_perr_sm_instr_v,
ex0_perr_sm_instr_v,
ex1_perr_sm_instr_v,
ex2_perr_sm_instr_v,
ex3_perr_sm_instr_v,
ex4_perr_sm_instr_v,
ex5_perr_sm_instr_v,
ex6_perr_sm_instr_v,
ex7_perr_sm_instr_v,
ex4_regfile_err_det_any,
ex5_regfile_err_det_any, // ex3_regfile_err_det, //xu_fu_regfile_seq_beg, // need extra cycles for holdall to take effect
ex6_regfile_err_det_any,
regfile_seq_end,
rf0_regfile_ue,
rf0_regfile_ce}),
//-------------------------------------------
.dout({ perr_addr_l2[0:5],
perr_tid_l2[0:1],
spare_unused[0:1],
perr_move_f0_to_f1_l2,
perr_move_f1_to_f0_l2,
ex0_perr_force_c,
ex1_perr_force_c,
ex2_perr_force_c,
rf0_perr_sm_instr_v,
ex0_perr_sm_instr_v,
ex1_perr_sm_instr_v,
ex2_perr_sm_instr_v,
ex3_perr_sm_instr_v,
ex4_perr_sm_instr_v,
ex5_perr_sm_instr_v,
ex6_perr_sm_instr_v,
ex7_perr_sm_instr_v,
ex8_perr_sm_instr_v,
ex5_regfile_err_det_any,
ex6_regfile_err_det_any,
regfile_seq_beg,
spare_unused[2],
ex0_regfile_ue,
ex0_regfile_ce})
);
//-------------------------------------------
assign rf0_perr_sm_instr_v_b = (~rf0_perr_sm_instr_v);
// State 0 = 100 = Default, no parity error
// State 1 = 010 = Parity error detected. Flush System, and read out both entries
// State 2 = 001 = Move good to bad, or UE
assign perr_sm_running = (~perr_sm_l2[0]);
assign xx_perr_sm_running = (~perr_sm_l2[0]);
// Goto State0 at the end of the sequence. That's either after a UE, or writeback is done
assign perr_sm_ns[0] = (perr_sm_l2[2] & rf0_regfile_ue) | (perr_sm_l2[2] & ex7_perr_sm_instr_v);
assign regfile_seq_end = perr_sm_ns[0];
// Goto State1 when a parity error is detected.
assign perr_sm_ns[1] = perr_sm_l2[0] & regfile_seq_beg;
// Goto State2 when both sets of data have been read out
assign perr_sm_ns[2] = perr_sm_l2[1] & ex7_perr_sm_instr_v;
// set move decision. Both means Uncorrectable Error
assign perr_move_f0_to_f1 = (ex3_f1b_perr & ( (perr_sm_l2[1] & ex3_perr_sm_instr_v))) |
(perr_move_f0_to_f1_l2 & (~(perr_sm_l2[1] & ex3_perr_sm_instr_v)));
assign perr_move_f1_to_f0 = (ex3_f0c_perr & ( (perr_sm_l2[1] & ex3_perr_sm_instr_v))) |
(perr_move_f1_to_f0_l2 & (~(perr_sm_l2[1] & ex3_perr_sm_instr_v)));
assign rf0_perr_move_f0_to_f1 = perr_move_f0_to_f1_l2 & (perr_sm_l2[2] & rf0_perr_sm_instr_v);
assign rf0_perr_move_f1_to_f0 = perr_move_f1_to_f0_l2 & (perr_sm_l2[2] & rf0_perr_sm_instr_v);
assign rf0_perr_fixed_itself = (~(perr_move_f1_to_f0_l2 | perr_move_f0_to_f1_l2)) & (perr_sm_l2[2] & rf0_perr_sm_instr_v); // this is for the case where initially a parity error was detected, but when re-read out of the regfile both copies are correct. We still want to report this.
assign rf0_perr_force_c = rf0_perr_move_f0_to_f1 & (~rf0_perr_move_f1_to_f0);
assign xx_ex2_perr_force_c = ex2_perr_force_c;
assign xx_ex2_perr_fsel_ovrd = ex2_perr_sm_instr_v & perr_sm_l2[2]; //cyc // perr_insert
assign perr_sm_din[0:2] = (3'b100 & {3{perr_sm_ns[0]}}) |
(3'b010 & {3{perr_sm_ns[1]}}) |
(3'b001 & {3{perr_sm_ns[2]}}) |
(perr_sm_l2 & {3{(~(|(perr_sm_ns[0:2])))}});
// Send a dummy instruction down the pipe for reading or writing the regfiles
assign new_perr_sm_instr_v = perr_sm_ns[1] | perr_sm_ns[2];
// Save the offending address and tid on any parity error and hold.
assign ex3_capture_addr = ex3_regfile_err_det_any & perr_sm_l2[0] &
(~ex4_regfile_err_det_any) &
(~ex5_regfile_err_det_any) & // need to cover the cycles while waiting for rv to hold_all
(~ex6_regfile_err_det_any) & // safety cycle
(~regfile_seq_beg);
assign perr_addr_din[0:5] = ((ex3_f0a_perr & ex3_capture_addr) == 1'b1) ? ex3_instr_fra[0:5] :
((ex3_f1b_perr & ex3_capture_addr) == 1'b1) ? ex3_instr_frb[0:5] :
((ex3_f0c_perr & ex3_capture_addr) == 1'b1) ? ex3_instr_frc[0:5] :
((ex3_f1s_perr & ex3_capture_addr) == 1'b1) ? ex3_instr_frs[0:5] :
perr_addr_l2[0:5];
assign perr_tid_din[0:1] = (ex3_fpr_perr[0:1] & {2{ (ex3_capture_addr)}}) |
(perr_tid_l2[0:1] & {2{~(ex3_capture_addr)}});
//Mux into the FPR address
// perr_insert
assign rf0_frc_perr_x_b[0:5] = (~(perr_addr_l2[0:5] & {6{rf0_perr_sm_instr_v}}));
assign rf0_frc_iu_x_b[0:5] = (~(rf0_instr_frc[0:5] & {6{rf0_perr_sm_instr_v_b}}));
assign rf0_dcd_frc[0:5] = (~(rf0_frc_perr_x_b[0:5] & rf0_frc_iu_x_b[0:5]));
assign rf0_frb_perr_x_b[0:5] = (~(perr_addr_l2[0:5] & {6{rf0_perr_sm_instr_v}}));
assign rf0_frb_iu_x_b[0:5] = (~(rf0_instr_frb[0:5] & {6{rf0_perr_sm_instr_v_b}}));
assign rf0_dcd_frb[0:5] = (~(rf0_frb_perr_x_b[0:5] & rf0_frb_iu_x_b[0:5]));
assign rf0_dcd_fra[0:5] = rf0_instr_fra[0:5];
assign rf0_dcd_tid[0:1] = (rf0_tid[0:1] & {2{rf0_perr_sm_instr_v_b}}) |
(perr_tid_l2[0:1] & {2{rf0_perr_sm_instr_v}});
// Determine if we have a ue or ce to report to PC
// state prefixes are for the recirc, not relevant to PC
assign rf0_regfile_ce = (rf0_perr_move_f0_to_f1 | rf0_perr_move_f1_to_f0 | rf0_perr_fixed_itself) & (~(rf0_perr_move_f0_to_f1 & rf0_perr_move_f1_to_f0));
assign rf0_regfile_ue = rf0_perr_move_f0_to_f1 & rf0_perr_move_f1_to_f0;
assign err_regfile_parity[0:1] = perr_tid_l2[0:1] & {2{ex0_regfile_ce}};
assign err_regfile_ue[0:1] = perr_tid_l2[0:1] & {2{ex0_regfile_ue}};
generate
if (THREADS == 1)
begin : dcd_err_rpt_thr1
tri_direct_err_rpt #(.WIDTH(2)) fu_err_rpt(
.vd(vdd),
.gd(gnd),
.err_in({ err_regfile_parity[0],
err_regfile_ue[0]}),
.err_out({xx_pc_err_regfile_parity[0],
xx_pc_err_regfile_ue[0] })
);
end
endgenerate
generate
if (THREADS == 2)
begin : dcd_err_rpt_thr2
tri_direct_err_rpt #(.WIDTH(4)) fu_err_rpt(
.vd(vdd),
.gd(gnd),
.err_in({ err_regfile_parity[0],
err_regfile_parity[1],
err_regfile_ue[0],
err_regfile_ue[1]
}),
.err_out({xx_pc_err_regfile_parity[0],
xx_pc_err_regfile_parity[1],
xx_pc_err_regfile_ue[0],
xx_pc_err_regfile_ue[1] })
);
end
endgenerate
//----------------------------------------------------------------------
assign rv_hold_all_din = ex3_hangcounter_trigger |
ex3_regfile_err_det_any |
ex4_regfile_err_det_any |
ex5_regfile_err_det_any |
ex6_regfile_err_det_any |
regfile_seq_beg | perr_sm_running;
tri_rlmreg_p #(.INIT(0), .WIDTH(1)) holdall_lat(
.nclk(nclk),
.act(tihi),
.force_t(force_t),
.d_mode(tiup),
.delay_lclkr(delay_lclkr[9]),
.mpw1_b(mpw1_b[9]),
.mpw2_b(mpw2_b[1]),
.thold_b(thold_0_b),
.sg(sg_0),
.vd(vdd),
.gd(gnd),
.scin(holdall_si[0:0]),
.scout(holdall_so[0:0]),
.din(rv_hold_all_din),
//-------------------------------------------
.dout(rv_hold_all_q)
);
//-------------------------------------------
assign xx_rv_hold_all = rv_hold_all_q;
//-------------------------------------------
// perr
assign ex2_perr_si[0:23] = {ex2_perr_so[1:23], perr_si};
assign ex3_perr_si[0:23] = {ex3_perr_so[1:23], ex2_perr_so[0]};
assign perr_sm_si[0:2] = {perr_sm_so[1:2], ex3_perr_so[0]};
assign perr_ctl_si[0:30] = {perr_ctl_so[1:30], perr_sm_so[0]};
assign ex4_ctl_perr_si[0:3] = {ex4_ctl_perr_so[1:3], perr_ctl_so[0]};
assign holdall_si[0] = {ex4_ctl_perr_so[0]};
assign exx_regfile_err_det_si[0:8] = {exx_regfile_err_det_so[1:8], holdall_so[0]};
assign perr_so = exx_regfile_err_det_so[0];
// end perr
endmodule