|
|
# A2L2 Interface
|
|
|
|
|
|
import cocotb
|
|
|
from cocotb.triggers import Timer, RisingEdge
|
|
|
from cocotb.binary import BinaryValue
|
|
|
from cocotb.handle import Force
|
|
|
from cocotb.handle import Release
|
|
|
|
|
|
from dotmap import DotMap
|
|
|
import itertools
|
|
|
|
|
|
from OPEnv import *
|
|
|
|
|
|
# ------------------------------------------------------------------------------------------------
|
|
|
# Classes
|
|
|
|
|
|
'''
|
|
|
Data return timings from spec:
|
|
|
|
|
|
* Reload Data Coming
|
|
|
Indicates that reload data is coming in three cycles. This signal is required for L2 designs that return data in consecutive cycles, but can be
|
|
|
tied to a logic ‘0’ for designs that return data in every other cycle. For L2 designs that return data in consecutive cycles, this signal should be
|
|
|
asserted three cycles ahead of the first of two paired data beats. If more than two data beats will be presented consecutively, this signal should be
|
|
|
asserted once for the first set of two (paired) data beats and once for the second set of two (paired) data beats. Each assertion
|
|
|
should be three cycles ahead of the first beat of the paired set of data beats. This signal allows the A2 core to insert an issue bubble for the second
|
|
|
reload data beat to avoid flushing the processor pipe. This signal is not required to be asserted as described above for DITC return data.
|
|
|
For non-cacheable (I=1) reloads of one or two beats, this signal should be asserted three cycles ahead of the first (and possibly only) data beat transfer.
|
|
|
|
|
|
* Reload Data Valid
|
|
|
Indicates that reload data is coming in two cycles. This signal qualifies the other reload interface signals sent in this cycle: reld_ditc, reld_core_tag, reld_crit_qw, and reld_qw.
|
|
|
If reld_data_vld is not active, then the qualified signals should be ignored.
|
|
|
|
|
|
* Reload Direct Inter-Thread Communication
|
|
|
Indicates that the reload data is associated with a DITC transfer instead of a standard load-ttype reload. This signal is qualified by reld_data_vld and determines the
|
|
|
interpretation of the reld_core_tag bus. DITC reload data transfers are always 64-Byte transfers that follow the same consecutive cycle or every-other-cycle behavior
|
|
|
as standard load-ttype reloads for the attached L2.
|
|
|
|
|
|
**i believe this means ditc can use either 1of2/2of2 or 1of2/-/-/2of2 pattern, but never requires data_coming (probs because pipe considerations not important for ditc)**
|
|
|
|
|
|
======
|
|
|
Cycles:
|
|
|
|
|
|
* d-3 (reld_data_coming)
|
|
|
Loads:
|
|
|
1. I=1: assert 3 cycs ahead of first transfer (two transfers only if 32B allowed)
|
|
|
2. I=0 data every other cycle: not asserted
|
|
|
3. I=0 data consecutive cycles: assert 3 cycs ahead of the 1of2 paired beats; if more than 2 beats are consecutive, assert 3 cycs ahead of each paired beat
|
|
|
DITC:
|
|
|
1. assertion not required **(or used by core?)**
|
|
|
|
|
|
* d-2 (reld_data_vld and qualified signals)
|
|
|
Loads:
|
|
|
1. assert 2 cycs ahead of data
|
|
|
DITC:
|
|
|
1. assert 2 cycs ahead of data and also assert reld_ditc
|
|
|
|
|
|
Cacheable Return Modes:
|
|
|
1. no back-to-back: coming=0
|
|
|
2. all back-to-back: coming=1/0/1
|
|
|
3. interleaved back-to-back: coming=1/0/0/0/1
|
|
|
4. mixed: legal cases for subxfers (?) **i think the 'mixed' aren't valid - xucr0[52] selects b2b mode**
|
|
|
* 1 1 1 1 (no b2b)
|
|
|
* 1 2 1 (mixed)
|
|
|
* 1 1 2 (mixed)
|
|
|
* 2 1 1 (mixed)
|
|
|
* 2 2 (full b2b)
|
|
|
5. between subxfers a delay or other transaction can be inserted
|
|
|
|
|
|
?? xucr0[52] definition selects b2b but also says crit first; i guess this means crit first is allowed, but not required?? a2l2 spec says it is not required to send crit first
|
|
|
|
|
|
'''
|
|
|
class A2L2Trans(DotMap):
|
|
|
'''A2L2 Transaction'''
|
|
|
nextID = itertools.count()
|
|
|
def __init__(self, sim, tid, tt, tag=None, addr=None, length=0, wimg=0, cycD=None, be=None, data=None, le=False):
|
|
|
super().__init__()
|
|
|
self.sim = sim
|
|
|
self.id = next(A2L2Trans.nextID)
|
|
|
self.tid = tid
|
|
|
self.tt = tt
|
|
|
self.tag = tag
|
|
|
self.addr = addr
|
|
|
if length == 0 or length == 3:
|
|
|
raise Exception(f'A2L2Trans: bad length encode: {length}')
|
|
|
elif length == 5:
|
|
|
self.len = 8
|
|
|
elif length == 6:
|
|
|
self.len = 16
|
|
|
elif length == 7:
|
|
|
self.len = 32
|
|
|
else:
|
|
|
self.len = length
|
|
|
self.wimg = wimg
|
|
|
self.xfers = 1
|
|
|
self.xferNum = 0
|
|
|
self.xferCrit = 1
|
|
|
self.beatNum = 1
|
|
|
if cycD is not None:
|
|
|
self.cycC = cycD - 3
|
|
|
self.cycV = cycD - 2
|
|
|
self.cycD = cycD
|
|
|
self.be = f'{int(be, 16):032b}' if be is not None else None
|
|
|
self.data = data
|
|
|
self.LE = le
|
|
|
self.done = False
|
|
|
|
|
|
self.ieq1 = wimg & 0x4 == 0x4
|
|
|
|
|
|
self.load = tt == 0x00 or tt == 0x08 or tt == 0x22 or tt == 0x09 or tt == 0x0B # IF, LD, DITC, LARX, LARX_HINT
|
|
|
self.store = tt == 0x20 or tt == 0x29 # ST, STCX
|
|
|
|
|
|
if self.load:
|
|
|
self.addr = self.addr & 0xFFFFFFF0
|
|
|
elif self.store:
|
|
|
#self.addr = self.addr & 0xFFFFFFE0 #wtf definitely 16B-aligned occurring
|
|
|
#self.addr = self.addr & 0xFFFFFFF0 # keep low bits for 1B and 2B stores
|
|
|
if self.be == None or self.data == None:
|
|
|
raise Exception('A2L2Trans: store must have BE and data')
|
|
|
else:
|
|
|
self.len = 0
|
|
|
self.storeStart = None
|
|
|
for i in range(len(self.be)):
|
|
|
if self.be[i] == '1':
|
|
|
if self.storeStart is None:
|
|
|
self.storeStart = i
|
|
|
self.len += 1
|
|
|
elif self.storeStart is not None:
|
|
|
break
|
|
|
else:
|
|
|
raise Exception(f'A2L2Trans: unsupported ttype={tt}')
|
|
|
|
|
|
self.ditc = tt == 0x22
|
|
|
|
|
|
if self.ieq1:
|
|
|
if tt == 0x00 or tt == 0x08: # IF, LD
|
|
|
if len == 7:
|
|
|
self.xfers = 2
|
|
|
elif tt == 0x22: # DITC
|
|
|
self.xfers = 4
|
|
|
else:
|
|
|
if self.load:
|
|
|
self.xfers = 4
|
|
|
self.xferCrit = ((self.addr & 0x30) >> 4) + 1
|
|
|
self.addr = self.addr & 0xFFFFFFC0
|
|
|
|
|
|
def readXfer(self):
|
|
|
# read() returns this qw crit-first if cacheable!
|
|
|
w0 = self.sim.mem.read(self.addr)
|
|
|
w1 = self.sim.mem.read(self.addr+4)
|
|
|
w2 = self.sim.mem.read(self.addr+8)
|
|
|
w3 = self.sim.mem.read(self.addr+12)
|
|
|
beatNum = self.beatNum
|
|
|
if self.beatNum < self.xfers:
|
|
|
self.beatNum += 1
|
|
|
self.cycD += 1
|
|
|
self.addr += 16 #wtf this is wrong - going to need to schedule the pattern when the trans is created!!!!!!!!!!!!!!!!!!!!!!!!
|
|
|
return w0,w1,w2,w3,beatNum
|
|
|
|
|
|
def doStore(self):
|
|
|
addr = (((self.addr & 0xFFFFFFF0) + self.storeStart) >> 2) << 2 # word-align
|
|
|
dataStart = self.storeStart*2
|
|
|
if self.len == 1:
|
|
|
word = self.sim.mem.read(addr)
|
|
|
byte = self.addr & 0x3
|
|
|
if self.LE:
|
|
|
if byte == 0:
|
|
|
mask = 0xFFFFFF00
|
|
|
elif byte == 1:
|
|
|
mask = 0xFFFF00FF
|
|
|
elif byte == 2:
|
|
|
mask = 0xFF00FFFF
|
|
|
else:
|
|
|
mask = 0x00FFFFFF
|
|
|
word = (word & mask) | (int(self.data[dataStart:dataStart+2], 16) << (byte*8))
|
|
|
else:
|
|
|
if byte == 0:
|
|
|
mask = 0x00FFFFFF
|
|
|
elif byte == 1:
|
|
|
mask = 0xFF00FFFF
|
|
|
elif byte == 2:
|
|
|
mask = 0xFFFF00FF
|
|
|
else:
|
|
|
mask = 0xFFFFFF00
|
|
|
word = (word & mask) | (int(self.data[dataStart:dataStart+2], 16) << ((3-byte)*8))
|
|
|
self.sim.mem.write(addr, word)
|
|
|
|
|
|
elif self.len == 2:
|
|
|
word = self.sim.mem.read(addr)
|
|
|
hw = (self.addr & 0x2) >> 1
|
|
|
if self.LE:
|
|
|
if hw == 0:
|
|
|
mask = 0xFFFF0000
|
|
|
else:
|
|
|
mask = 0x0000FFFF
|
|
|
word = (word & mask) | (int(self.data[dataStart:dataStart+4], 16) << (hw*16))
|
|
|
else:
|
|
|
if hw == 0:
|
|
|
mask = 0x0000FFFF
|
|
|
else:
|
|
|
mask = 0xFFFF0000
|
|
|
word = (word & mask) | (int(self.data[dataStart:dataStart+4], 16) << ((1-hw)*16))
|
|
|
self.sim.mem.write(addr, word)
|
|
|
|
|
|
elif self.len == 4:
|
|
|
self.sim.mem.write(addr, int(self.data[dataStart:dataStart+8], 16))
|
|
|
|
|
|
elif self.len == 8:
|
|
|
if self.LE:
|
|
|
self.sim.mem.write(addr, int(self.data[dataStart:dataStart+16], 16))
|
|
|
self.sim.mem.write(addr+4, int(self.data[dataStart+16:dataStart+32], 16))
|
|
|
else:
|
|
|
self.sim.mem.write(addr+4, int(self.data[dataStart:dataStart+16], 16))
|
|
|
self.sim.mem.write(addr, int(self.data[dataStart+16:dataStart+32], 16))
|
|
|
|
|
|
elif self.len == 16:
|
|
|
if self.LE:
|
|
|
self.sim.mem.write(addr, int(self.data[0:8], 16))
|
|
|
self.sim.mem.write(addr+4, int(self.data[8:16], 16))
|
|
|
self.sim.mem.write(addr+8, int(self.data[16:24], 16))
|
|
|
self.sim.mem.write(addr+12, int(self.data[24:32], 16))
|
|
|
else:
|
|
|
self.sim.mem.write(addr+12, int(self.data[0:8], 16))
|
|
|
self.sim.mem.write(addr+8, int(self.data[8:16], 16))
|
|
|
self.sim.mem.write(addr+4, int(self.data[16:24], 16))
|
|
|
self.sim.mem.write(addr, int(self.data[24:32], 16))
|
|
|
|
|
|
elif self.len == 32:
|
|
|
if self.LE:
|
|
|
self.sim.mem.write(addr, int(self.data[0:8], 16))
|
|
|
self.sim.mem.write(addr+4, int(self.data[8:16], 16))
|
|
|
self.sim.mem.write(addr+8, int(self.data[16:24], 16))
|
|
|
self.sim.mem.write(addr+12, int(self.data[24:32], 16))
|
|
|
self.sim.mem.write(addr+16, int(self.data[32:40], 16))
|
|
|
self.sim.mem.write(addr+20, int(self.data[40:48], 16))
|
|
|
self.sim.mem.write(addr+24, int(self.data[48:56], 16))
|
|
|
self.sim.mem.write(addr+28, int(self.data[56:64], 16))
|
|
|
else:
|
|
|
self.sim.mem.write(addr+28, int(self.data[0:8], 16))
|
|
|
self.sim.mem.write(addr+24, int(self.data[8:16], 16))
|
|
|
self.sim.mem.write(addr+20, int(self.data[16:24], 16))
|
|
|
self.sim.mem.write(addr+16, int(self.data[24:32], 16))
|
|
|
self.sim.mem.write(addr+12, int(self.data[32:40], 16))
|
|
|
self.sim.mem.write(addr+8, int(self.data[40:48], 16))
|
|
|
self.sim.mem.write(addr+4, int(self.data[48:56], 16))
|
|
|
self.sim.mem.write(addr, int(self.data[56:64], 16))
|
|
|
|
|
|
else:
|
|
|
raise Exception(f'A2L2Trans: unsupported store len={self.len}')
|
|
|
|
|
|
# ------------------------------------------------------------------------------------------------
|
|
|
# Tasks
|
|
|
|
|
|
transTypes = {
|
|
|
'00': 'IFETCH',
|
|
|
'08': 'LOAD',
|
|
|
'20': 'STORE'
|
|
|
}
|
|
|
|
|
|
async def A2L2Driver(dut, sim):
|
|
|
"""A2L2 node interface"""
|
|
|
|
|
|
ok = True
|
|
|
readPending = []
|
|
|
countReads = 0
|
|
|
mem = {}
|
|
|
sim.msg('A2L2 Driver: started.')
|
|
|
|
|
|
sim.a2o.root.an_ac_flh2l2_gate.value = 0
|
|
|
|
|
|
while ok and not sim.done:
|
|
|
|
|
|
await RisingEdge(dut.clk_1x)
|
|
|
|
|
|
sim.a2o.root.an_ac_req_ld_pop.value = 0
|
|
|
sim.a2o.root.an_ac_req_st_pop.value = 0
|
|
|
sim.a2o.root.an_ac_req_st_gather.value = 0
|
|
|
|
|
|
sim.a2o.root.an_ac_reld_data_coming.value = 0
|
|
|
sim.a2o.root.an_ac_reld_data_vld.value = 0
|
|
|
sim.a2o.root.an_ac_reld_ecc_err.value = 0
|
|
|
sim.a2o.root.an_ac_reld_ecc_err_ue.value = 0
|
|
|
sim.a2o.root.an_ac_reld_ditc.value = 0
|
|
|
sim.a2o.root.an_ac_reld_l1_dump.value = 0
|
|
|
sim.a2o.root.an_ac_req_spare_ctrl_a1.value = 0
|
|
|
|
|
|
if sim.threads == 1:
|
|
|
sim.a2o.root.an_ac_reservation_vld.value = 0
|
|
|
sim.a2o.root.an_ac_stcx_complete.value = 0
|
|
|
sim.a2o.root.an_ac_stcx_pass.value = 0
|
|
|
else:
|
|
|
for i in range(sim.threads):
|
|
|
sim.a2o.root.an_ac_reservation_vld[i].value = 0
|
|
|
sim.a2o.root.an_ac_stcx_complete[i].value = 0
|
|
|
sim.a2o.root.an_ac_stcx_pass[i].value = 0
|
|
|
|
|
|
sim.a2o.root.an_ac_sync_ack.value = 0
|
|
|
sim.a2o.root.an_ac_icbi_ack.value = 0
|
|
|
sim.a2o.root.an_ac_back_inv.value = 0
|
|
|
|
|
|
# bummer IndexError: Slice indexing is not supported
|
|
|
#sim.a2o.root.an_ac_reld_data[0:31].value = 0x48000000
|
|
|
#sim.a2o.root.an_ac_reld_data[32:63].value = 0x48000000
|
|
|
#sim.a2o.root.an_ac_reld_data[64:95].value = 0x48000000
|
|
|
#sim.a2o.root.an_ac_reld_data[96:127].value = 0x48000000
|
|
|
# bummer TypeError: Unsupported type for value assignment: <class 'str'> ('48000000480000004800000048000000')
|
|
|
#sim.a2o.root.an_ac_reld_data.value = '48000000480000004800000048000000'
|
|
|
#v = 0x48000000
|
|
|
# bummer TypeError: Unsupported type for value assignment: <class 'str'> ('01001000000000000000000000000000010010000000000000000000000000000100100000000000000000000000000001001000000000000000000000000000')
|
|
|
#sim.a2o.root.an_ac_reld_data.value = f'{v:0>32b}{v:0>32b}{v:0>32b}{v:0>32b}'
|
|
|
# otay!
|
|
|
#v1 = cocotb.binary.BinaryValue()
|
|
|
#v1.assign(f'{v:0>32b}{v:0>32b}{v:0>32b}{v:0>32b}')
|
|
|
#sim.a2o.root.an_ac_reld_data.value = v1.value
|
|
|
|
|
|
if sim.a2o.root.ac_an_req.value: # should first check ac_an_req_pwr_token prev cyc
|
|
|
|
|
|
tt = hex(sim.a2o.root.ac_an_req_ttype, 2)
|
|
|
transType = transTypes[tt]
|
|
|
tid = hex(sim.a2o.root.ac_an_req_thread)
|
|
|
ra = hex(sim.a2o.root.ac_an_req_ra, 8)
|
|
|
tag = hex(sim.a2o.root.ac_an_req_ld_core_tag, 2)
|
|
|
lenEnc = hex(sim.a2o.root.ac_an_req_ld_xfr_len)
|
|
|
le = 'LE ' if sim.a2o.root.ac_an_req_endian.value else ''
|
|
|
wimg_w = sim.a2o.root.ac_an_req_wimg_w.value
|
|
|
wimg_i = sim.a2o.root.ac_an_req_wimg_i.value
|
|
|
wimg_m = sim.a2o.root.ac_an_req_wimg_m.value
|
|
|
wimg_g = sim.a2o.root.ac_an_req_wimg_g.value
|
|
|
wimg = 0
|
|
|
if wimg_w:
|
|
|
wimg += 8
|
|
|
if wimg_i:
|
|
|
wimg += 4
|
|
|
if wimg_m:
|
|
|
wimg += 2
|
|
|
if wimg_g:
|
|
|
wimg += 1
|
|
|
|
|
|
if transType == 'IFETCH' or transType == 'LOAD':
|
|
|
# when allowing out-of-order, schedule reld once added
|
|
|
if len(readPending) == 0:
|
|
|
reldCyc = sim.cycle + 6 # const for now
|
|
|
else:
|
|
|
reldCyc = readPending[-1].cycD + 4 # worst-case const for now
|
|
|
trans = A2L2Trans(sim, tid, int(tt, 16), int(tag, 16), int(ra, 16), int(lenEnc, 16), wimg, reldCyc, le=le)
|
|
|
readPending.append(trans)
|
|
|
sim.msg(f'T{tid} {transType} {ra} tag={tag} len={trans.len} {le}WIMG:{wimg:X} reld data:{trans.cycD}')
|
|
|
elif transType == 'STORE':
|
|
|
# should verify st_data_pwr_token prev cycle
|
|
|
be = hex(sim.a2o.root.ac_an_st_byte_enbl, 8)
|
|
|
data = hex(sim.a2o.root.ac_an_st_data, 64)
|
|
|
trans = A2L2Trans(sim, tid, int(tt, 16), int(tag, 16), int(ra, 16), int(lenEnc, 16), wimg, None, be=be, data=data, le=le)
|
|
|
sim.msg(f'T{tid} {transType} {ra} tag={tag} len={trans.len} be={be} data={data} {le}WIMG:{wimg:X}')
|
|
|
trans.doStore()
|
|
|
sim.a2o.root.an_ac_req_st_pop.value = 1 #wtf can randomize, etc.
|
|
|
#assert False, 'got a store'
|
|
|
|
|
|
# data early indicator (d-3)
|
|
|
sim.a2o.root.an_ac_reld_data_coming.value = 0
|
|
|
for i in range(len(readPending)):
|
|
|
trans = readPending[i]
|
|
|
if trans.cycC == sim.cycle:
|
|
|
sim.a2o.root.an_ac_reld_data_coming.value = 1
|
|
|
if trans.xferNum == 0 and trans.xfers == 4: # 4 beats b2b - need diff scheduling for all modes
|
|
|
trans.cycC += 2
|
|
|
|
|
|
# data valid indicator (d-2)
|
|
|
sim.a2o.root.an_ac_reld_data_vld.value = 0
|
|
|
sim.a2o.root.an_ac_reld_core_tag.value = 0x1F
|
|
|
sim.a2o.root.an_ac_reld_ditc.value = 1
|
|
|
sim.a2o.root.an_ac_reld_qw.value = 3
|
|
|
sim.a2o.root.an_ac_reld_crit_qw.value = 1
|
|
|
|
|
|
for i in range(len(readPending)):
|
|
|
trans = readPending[i]
|
|
|
if trans.cycV == sim.cycle:
|
|
|
trans.xferNum += 1
|
|
|
sim.a2o.root.an_ac_reld_data_vld.value = 1
|
|
|
sim.a2o.root.an_ac_reld_core_tag.value = trans.tag
|
|
|
sim.a2o.root.an_ac_reld_ditc.value = 1 if trans.ditc else 0
|
|
|
sim.a2o.root.an_ac_reld_qw.value = trans.xferNum - 1
|
|
|
sim.a2o.root.an_ac_reld_crit_qw.value = 1 if trans.xferNum == trans.xferCrit else 0
|
|
|
if trans.xferNum < 4 and trans.xfers == 4:
|
|
|
trans.cycV += 1
|
|
|
|
|
|
# data beat
|
|
|
if len(readPending) > 0 and readPending[0].cycD == sim.cycle: # ordered
|
|
|
|
|
|
trans = readPending[0]
|
|
|
w0,w1,w2,w3,beatNum = trans.readXfer()
|
|
|
|
|
|
v1 = cocotb.binary.BinaryValue()
|
|
|
v1.assign(f'{w0:0>32b}{w1:0>32b}{w2:0>32b}{w3:0>32b}')
|
|
|
sim.a2o.root.an_ac_reld_data.value = v1.value
|
|
|
|
|
|
sim.msg(f'RELD tag={trans.tag:02X} {w0:08X}{w1:08X}{w2:08X}{w3:08X} {beatNum}of{trans.xfers}{" crit" if beatNum == trans.xferCrit else ""}')
|
|
|
|
|
|
if beatNum == trans.xfers:
|
|
|
trans.done = True
|
|
|
countReads += 1 #wtf do this in monitor
|
|
|
if len(readPending) == 1:
|
|
|
readPending = []
|
|
|
else:
|
|
|
readPending = readPending[1:]
|
|
|
sim.a2o.root.an_ac_req_ld_pop.value = 1 #wtf can randomize, etc.
|
|
|
|
|
|
|
|
|
# A2L2 Checker
|
|
|
# check protocol, etc.
|
|
|
async def A2L2Checker(dut, sim):
|
|
|
"""A2L2 interface checker """
|
|
|
|
|
|
me = 'A2L2 Checker'
|
|
|
ok = True
|
|
|
sim.msg(f'{me}: started.')
|
|
|
|
|
|
while ok:
|
|
|
await RisingEdge(dut.clk_1x)
|
|
|
|
|
|
|
|
|
# A2L2 Monitor
|
|
|
# count transactions, etc.
|
|
|
# fail on bad addresses
|
|
|
|
|
|
# TRANS MONITORING NOT COMPLETE!
|
|
|
async def A2L2Monitor(dut, sim, watchTrans=False):
|
|
|
"""A2L2 interface monitor"""
|
|
|
|
|
|
me = 'A2L2 Monitor'
|
|
|
ok = True
|
|
|
start = len(sim.config.a2l2.badAddr) > 0
|
|
|
sim.msg(f'{me}: started.')
|
|
|
reqValid = []
|
|
|
rldValidCyc = []
|
|
|
dataValidCyc = []
|
|
|
|
|
|
while start and ok:
|
|
|
|
|
|
await RisingEdge(dut.clk_1x)
|
|
|
|
|
|
if sim.a2o.root.ac_an_req.value: # should first check ac_an_req_pwr_token prev cyc
|
|
|
|
|
|
tt = hex(sim.a2o.root.ac_an_req_ttype, 2)
|
|
|
transType = transTypes[tt]
|
|
|
tid = hex(sim.a2o.root.ac_an_req_thread)
|
|
|
ra = hex(sim.a2o.root.ac_an_req_ra, 8)
|
|
|
tag = hex(sim.a2o.root.ac_an_req_ld_core_tag, 2)
|
|
|
lenEnc = hex(sim.a2o.root.ac_an_req_ld_xfr_len)
|
|
|
le = 'LE ' if sim.a2o.root.ac_an_req_endian.value else ''
|
|
|
wimg_w = sim.a2o.root.ac_an_req_wimg_w.value
|
|
|
wimg_i = sim.a2o.root.ac_an_req_wimg_i.value
|
|
|
wimg_m = sim.a2o.root.ac_an_req_wimg_m.value
|
|
|
wimg_g = sim.a2o.root.ac_an_req_wimg_g.value
|
|
|
wimg = 0
|
|
|
if wimg_w:
|
|
|
wimg += 8
|
|
|
if wimg_i:
|
|
|
wimg += 4
|
|
|
if wimg_m:
|
|
|
wimg += 2
|
|
|
if wimg_g:
|
|
|
wimg += 1
|
|
|
|
|
|
if transType == 'IFETCH' or transType == 'LOAD':
|
|
|
sim.msg(f'T{tid} {transType} {ra} tag={tag} len={lenEnc} {le}WIMG:{wimg:X}')
|
|
|
trans = A2L2Trans(sim, tid, int(tt, 16), int(tag, 16), int(ra, 16), int(lenEnc, 16), wimg, None, le=le)
|
|
|
reqValid.append(trans)
|
|
|
elif transType == 'STORE':
|
|
|
be = hex(sim.a2o.root.ac_an_st_byte_enbl, 8)
|
|
|
data = hex(sim.a2o.root.ac_an_st_data, 64)
|
|
|
trans = A2L2Trans(sim, tid, int(tt, 16), int(tag, 16), int(ra, 16), int(lenEnc, 16), wimg, None, be=be, data=data, le=le)
|
|
|
sim.msg(f'T{tid} {transType} {ra} tag={tag} len={lenEnc} be={be} data={data} {le}WIMG:{wimg:X}')
|
|
|
|
|
|
if tt == '00': #wtf someone should make this a enum/class
|
|
|
ra = sim.a2o.root.ac_an_req_ra.value.integer
|
|
|
for i in range(len(sim.config.a2l2.badAddr)):
|
|
|
blk = sim.config.a2l2.badAddr[i]
|
|
|
if 'I' in blk[2].upper():
|
|
|
blkStart = int(blk[0], 16)
|
|
|
blkEnd = int(blk[1], 16)
|
|
|
if ra >= blkStart and ra <= blkEnd:
|
|
|
ok = False
|
|
|
assert False, (f'{me}: Bad IFetch @={ra:08X}')
|
|
|
|
|
|
# coming (d-3_)
|
|
|
if sim.a2o.root.an_ac_reld_data_coming.value:
|
|
|
rldValidCyc.append(sim.cycle + 1)
|
|
|
|
|
|
# data valid indicator (d-2)
|
|
|
if len(rldValidCyc) > 0 and rldValidCyc[0] == sim.cycle:
|
|
|
if sim.a2o.root.an_ac_reld_data_vld.value:
|
|
|
#wtf append obj to rldValid!
|
|
|
tag = sim.a2o.root.an_ac_reld_core_tag.value
|
|
|
ditc = sim.a2o.root.an_ac_reld_ditc.value
|
|
|
qw = sim.a2o.root.an_ac_reld_qw.value
|
|
|
crit = sim.a2o.root.an_ac_reld_crit_qw.value
|
|
|
rldValidCyc = rldValidCyc[1:]
|
|
|
dataValidCyc.append(sim.cycle + 2)
|
|
|
else:
|
|
|
assert False, (f'{me}: Missing valid cycle')
|
|
|
|
|
|
# data beat (d-0)
|
|
|
if len(dataValidCyc) > 0 and dataValidCyc[0] == sim.cycle:
|
|
|
data = hex(sim.a2o.root.an_ac_reld_data, 32)
|
|
|
sim.msg(f'RELD tag={tag:02X} {data:32X}') #wtf need qw,crit
|
|
|
dataValidCyc = dataValidCyc[1:]
|
|
|
|
|
|
# added wb stuff to try to use cocoext_wishbone
|
|
|
class A2L2():
|
|
|
driver = A2L2Driver
|
|
|
checker = A2L2Checker
|
|
|
monitor = A2L2Monitor
|
|
|
|
|
|
def __init__(self):
|
|
|
pass
|
|
|
|
|
|
@classmethod
|
|
|
def addWBSlave(cls, dut, sim, signals):
|
|
|
cls.dut = dut
|
|
|
cls.sim = sim
|
|
|
cls.wbSignals = signals
|
|
|
|
|
|
@classmethod
|
|
|
def wbSlave(cls, trans):
|
|
|
for t in trans:
|
|
|
adr = t.adr.integer
|
|
|
if t.datwr is not None:
|
|
|
be = t.sel.integer
|
|
|
dat = t.datwr.value
|
|
|
cls.sim.msg(f'WB Slave: WR @{adr:08X} sel={be:X} dat={dat:08X}')
|
|
|
cls.sim.mem.write(adr, dat, be)
|
|
|
else: # reads either no wait or waitIdle?
|
|
|
#cls.sim.msg(f'WB Slave: RD @{adr:08X} {t.datrd:08X}')
|
|
|
pass # datgen msg only
|
|
|
if t.waitAck or t.waitStall or t.waitIdle:
|
|
|
#cls.sim.msg(f'WB Slave: stall={t.waitStall} ack={t.waitAck} idle={t.waitIdle}')
|
|
|
#cls.sim.msg(f'WB Slave: got wait!')
|
|
|
pass
|
|
|
|
|
|
@classmethod
|
|
|
# no adr from slave!
|
|
|
def wbDatgen(cls):
|
|
|
sigAdr = getattr(cls.dut, cls.wbSignals['adr'])
|
|
|
try:
|
|
|
adr = sigAdr.value.integer
|
|
|
except:
|
|
|
adr = 0
|
|
|
dat = cls.sim.mem.read(adr)
|
|
|
cls.sim.msg(f'WB Slave: RD @{adr:08X}={dat:08X}')
|
|
|
return dat #yield dat
|
|
|
|
|
|
class A2L2Iterable:
|
|
|
def __init__(self):
|
|
|
self.a2l2 = A2L2
|
|
|
|
|
|
def __iter__(self):
|
|
|
return self
|
|
|
|
|
|
def __next__(self):
|
|
|
return A2L2.wbDatgen()
|
|
|
|
|
|
|
|
|
|