You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

439 lines
15 KiB
Verilog

// © IBM Corp. 2020
// Licensed under the Apache License, Version 2.0 (the "License"), as modified by
// the terms below; you may not use the files in this repository except in
// compliance with the License as modified.
// You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0
//
// Modified Terms:
//
// 1) For the purpose of the patent license granted to you in Section 3 of the
// License, the "Work" hereby includes implementations of the work of authorship
// in physical form.
//
// 2) Notwithstanding any terms to the contrary in the License, any licenses
// necessary for implementation of the Work that are available from OpenPOWER
// via the Power ISA End User License Agreement (EULA) are explicitly excluded
// hereunder, and may be obtained from OpenPOWER under the terms and conditions
// of the EULA.
//
// Unless required by applicable law or agreed to in writing, the reference design
// distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
// WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
// for the specific language governing permissions and limitations under the License.
//
// Additional rights, including the ability to physically implement a softcore that
// is compliant with the required sections of the Power ISA Specification, are
// available at no cost under the terms of the OpenPOWER Power ISA EULA, which can be
// obtained (along with the Power ISA) here: https://openpowerfoundation.org.
`timescale 1 ns / 1 ns
// *********************************************************************
//
// This is the ENTITY for iuq_btb
//
// *********************************************************************
`include "tri_a2o.vh"
module iuq_btb(
// power pins
inout gnd,
inout vdd,
inout vcs,
// clock and clockcontrol ports
input clk,
input rst,
input pc_iu_func_sl_thold_2,
input pc_iu_sg_2,
input pc_iu_fce_2,
input tc_ac_ccflush_dc,
input clkoff_b,
input act_dis,
input d_mode,
input delay_lclkr,
input mpw1_b,
input mpw2_b,
input scan_in,
output scan_out,
// ports
input r_act,
input w_act,
input [0:5] r_addr,
input [0:5] w_addr,
input [0:2*`EFF_IFAR_WIDTH+2] data_in,
output [0:2*`EFF_IFAR_WIDTH+2] data_out,
input pc_iu_init_reset
);
//--------------------------
// constants
//--------------------------
parameter data_in_offset = 0;
parameter w_act_offset = data_in_offset + 2 * `EFF_IFAR_WIDTH + 3;
parameter r_act_offset = w_act_offset + 1;
parameter w_addr_offset = r_act_offset + 1;
parameter r_addr_offset = w_addr_offset + 6;
parameter reset_w_addr_offset = r_addr_offset + 6;
parameter data_out_offset = reset_w_addr_offset + 6;
parameter scan_right = data_out_offset + 2 * `EFF_IFAR_WIDTH + 3 - 1;
//--------------------------
// signals
//--------------------------
wire [0:71] w_data_in;
wire [0:71] r_data_out;
wire [0:5] zeros;
wire pc_iu_func_sl_thold_1;
wire pc_iu_func_sl_thold_0;
wire pc_iu_func_sl_thold_0_b;
wire pc_iu_sg_1;
wire pc_iu_sg_0;
wire pc_iu_fce_1;
(* analysis_not_referenced="true" *)
wire pc_iu_fce_0;
wire force_t;
wire [0:scan_right] siv;
wire [0:scan_right] sov;
wire tiup;
wire tidn;
wire write_thru;
wire [0:2*`EFF_IFAR_WIDTH+2] data_in_d;
wire [0:2*`EFF_IFAR_WIDTH+2] data_in_q;
wire w_act_d;
wire w_act_q;
wire r_act_d;
wire r_act_q;
wire [0:5] w_addr_d;
wire [0:5] w_addr_q;
wire [0:5] r_addr_d;
wire [0:5] r_addr_q;
wire [0:2*`EFF_IFAR_WIDTH+2] data_out_d;
wire [0:2*`EFF_IFAR_WIDTH+2] data_out_q;
wire lat_wi_act;
wire lat_ri_act;
wire lat_ro_act;
wire reset_act;
wire [0:5] reset_w_addr_d;
wire [0:5] reset_w_addr_q;
wire w_act_in;
wire [0:5] w_addr_in;
//unused
(* analysis_not_referenced="true" *)
wire abst_scan_out;
(* analysis_not_referenced="true" *)
wire time_scan_out;
(* analysis_not_referenced="true" *)
wire repr_scan_out;
(* analysis_not_referenced="true" *)
wire bo_pc_failout;
(* analysis_not_referenced="true" *)
wire bo_pc_diagloop;
assign tiup = 1'b1;
assign tidn = 1'b0;
assign reset_act = pc_iu_init_reset;
assign reset_w_addr_d[0:5] = reset_w_addr_q[0:5] + 6'b000001;
//-- data in
//
assign zeros[0:5] = {6{1'b0}};
//
//-- arrays
//
// tri array
assign w_act_in = reset_act | w_act;
assign w_addr_in[0:5] = reset_act ? reset_w_addr_q[0:5] : w_addr[0:5];
assign w_data_in[0:71] = reset_act ? 0 : {data_in[0:2 * `EFF_IFAR_WIDTH + 2], {(71 - (2 * `EFF_IFAR_WIDTH + 2)){1'b0}} };
tri_64x72_1r1w btb0(
.vdd(vdd),
.vcs(vcs),
.gnd(gnd),
.clk(clk),
.rst(rst),
.sg_0(pc_iu_sg_0),
.abst_sl_thold_0(tidn),
.ary_nsl_thold_0(tidn),
.time_sl_thold_0(tiup),
.repr_sl_thold_0(tiup),
// Reads
.rd0_act(r_act),
.rd0_adr(r_addr),
.do0(r_data_out),
// Writes
.wr_act(w_act_in),
.wr_adr(w_addr_in),
.di(w_data_in),
// Scan
.abst_scan_in(tidn),
.abst_scan_out(abst_scan_out),
.time_scan_in(tidn),
.time_scan_out(time_scan_out),
.repr_scan_in(tidn),
.repr_scan_out(repr_scan_out),
// Misc Pervasive
.scan_dis_dc_b(tidn), //an_ac_scan_dis_dc_b,
.scan_diag_dc(tidn), //an_ac_scan_diag_dc,
.ccflush_dc(tc_ac_ccflush_dc),
.clkoff_dc_b(clkoff_b), //g8t_clkoff_dc_b,
.d_mode_dc(d_mode), //g8t_d_mode_dc,
.mpw1_dc_b({5{mpw1_b}}), //g8t_mpw1_dc_b,
.mpw2_dc_b(mpw2_b), //g8t_mpw2_dc_b,
.delay_lclkr_dc({5{delay_lclkr}}), //g8t_delay_lclkr_dc,
// BOLT-ON
.lcb_bolt_sl_thold_0(tidn), //bolt_sl_thold_0,
.pc_bo_enable_2(tidn), //bo_enable_2, -- general bolt-on enable
.pc_bo_reset(tidn), //pc_xu_bo_reset, -- reset
.pc_bo_unload(tidn), //pc_xu_bo_unload, -- unload sticky bits
.pc_bo_repair(tidn), //pc_xu_bo_repair, -- execute sticky bit decode
.pc_bo_shdata(tidn), //pc_xu_bo_shdata, -- shift data for timing write and diag loop
.pc_bo_select(tidn), //pc_xu_bo_select, -- select for mask and hier writes
.bo_pc_failout(bo_pc_failout),
.bo_pc_diagloop(bo_pc_diagloop),
.tri_lcb_mpw1_dc_b(mpw1_b), //mpw1_dc_b,
.tri_lcb_mpw2_dc_b(mpw2_b), //mpw2_dc_b,
.tri_lcb_delay_lclkr_dc(delay_lclkr), //delay_lclkr_dc,
.tri_lcb_clkoff_dc_b(clkoff_b), //clkoff_dc_b,
.tri_lcb_act_dis_dc(act_dis),
// ABIST
.abist_bw_odd(tidn), //abist_g8t_bw_1_q,
.abist_bw_even(tidn), //abist_g8t_bw_0_q,
.tc_lbist_ary_wrt_thru_dc(tidn), //an_ac_lbist_ary_wrt_thru_dc,
.abist_ena_1(tidn), //pc_xu_abist_ena_dc,
.wr_abst_act(tidn), //abist_g8t_wenb_q,
.abist_wr_adr(zeros[0:5]), //abist_waddr_0_q,
.abist_di(zeros[0:3]), //abist_di_0_q,
.rd0_abst_act(tidn), //abist_g8t1p_renb_0_q,
.abist_rd0_adr(zeros[0:5]), //abist_raddr_0_q,
.abist_g8t_rd0_comp_ena(tidn), //abist_wl32_comp_ena_q,
.abist_raw_dc_b(tidn), //pc_xu_abist_raw_dc_b,
.obs0_abist_cmp(zeros[0:3]) //abist_g8t_dcomp_q
);
// write through support
assign data_in_d[0:2 * `EFF_IFAR_WIDTH + 2] = data_in[0:2 * `EFF_IFAR_WIDTH + 2];
assign w_act_d = w_act;
assign r_act_d = r_act;
assign w_addr_d[0:5] = w_addr[0:5];
assign r_addr_d[0:5] = r_addr[0:5];
assign write_thru = w_act_q & (w_addr_q[0:5] == r_addr_q[0:5]) & r_act_q;
// data out
assign data_out_d[0:2 * `EFF_IFAR_WIDTH + 2] = (write_thru == 1'b1) ? data_in_q[0:2 * `EFF_IFAR_WIDTH + 2] :
r_data_out[0:2 * `EFF_IFAR_WIDTH + 2];
assign data_out[0:2 * `EFF_IFAR_WIDTH + 2] = data_out_q[0:2 * `EFF_IFAR_WIDTH + 2];
//latch acts
assign lat_wi_act = w_act;
assign lat_ri_act = r_act;
assign lat_ro_act = r_act_q;
// latches
tri_rlmreg_p #(.WIDTH((2*`EFF_IFAR_WIDTH+2+1)), .INIT(0)) data_in_reg(
.vd(vdd),
.gd(gnd),
.clk(clk),
.rst(rst),
.act(lat_wi_act),
.thold_b(pc_iu_func_sl_thold_0_b),
.sg(pc_iu_sg_0),
.force_t(force_t),
.delay_lclkr(delay_lclkr),
.mpw1_b(mpw1_b),
.mpw2_b(mpw2_b),
.d_mode(d_mode),
.scin(siv[data_in_offset:data_in_offset + (2*`EFF_IFAR_WIDTH+2+1) - 1]),
.scout(sov[data_in_offset:data_in_offset + (2*`EFF_IFAR_WIDTH+2+1) - 1]),
.din(data_in_d),
.dout(data_in_q)
);
tri_rlmlatch_p #(.INIT(0)) w_act_reg(
.vd(vdd),
.gd(gnd),
.clk(clk),
.rst(rst),
.act(tiup),
.thold_b(pc_iu_func_sl_thold_0_b),
.sg(pc_iu_sg_0),
.force_t(force_t),
.delay_lclkr(delay_lclkr),
.mpw1_b(mpw1_b),
.mpw2_b(mpw2_b),
.d_mode(d_mode),
.scin(siv[w_act_offset]),
.scout(sov[w_act_offset]),
.din(w_act_d),
.dout(w_act_q)
);
tri_rlmlatch_p #(.INIT(0)) r_act_reg(
.vd(vdd),
.gd(gnd),
.clk(clk),
.rst(rst),
.act(tiup),
.thold_b(pc_iu_func_sl_thold_0_b),
.sg(pc_iu_sg_0),
.force_t(force_t),
.delay_lclkr(delay_lclkr),
.mpw1_b(mpw1_b),
.mpw2_b(mpw2_b),
.d_mode(d_mode),
.scin(siv[r_act_offset]),
.scout(sov[r_act_offset]),
.din(r_act_d),
.dout(r_act_q)
);
tri_rlmreg_p #(.WIDTH(6), .INIT(0)) w_addr_reg(
.vd(vdd),
.gd(gnd),
.clk(clk),
.rst(rst),
.act(lat_wi_act),
.thold_b(pc_iu_func_sl_thold_0_b),
.sg(pc_iu_sg_0),
.force_t(force_t),
.delay_lclkr(delay_lclkr),
.mpw1_b(mpw1_b),
.mpw2_b(mpw2_b),
.d_mode(d_mode),
.scin(siv[w_addr_offset:w_addr_offset + 6 - 1]),
.scout(sov[w_addr_offset:w_addr_offset + 6 - 1]),
.din(w_addr_d),
.dout(w_addr_q)
);
tri_rlmreg_p #(.WIDTH(6), .INIT(0)) r_addr_reg(
.vd(vdd),
.gd(gnd),
.clk(clk),
.rst(rst),
.act(lat_ri_act),
.thold_b(pc_iu_func_sl_thold_0_b),
.sg(pc_iu_sg_0),
.force_t(force_t),
.delay_lclkr(delay_lclkr),
.mpw1_b(mpw1_b),
.mpw2_b(mpw2_b),
.d_mode(d_mode),
.scin(siv[r_addr_offset:r_addr_offset + 6 - 1]),
.scout(sov[r_addr_offset:r_addr_offset + 6 - 1]),
.din(r_addr_d),
.dout(r_addr_q)
);
tri_rlmreg_p #(.WIDTH((2*`EFF_IFAR_WIDTH+2+1)), .INIT(0)) data_out_reg(
.vd(vdd),
.gd(gnd),
.clk(clk),
.rst(rst),
.act(lat_ro_act),
.thold_b(pc_iu_func_sl_thold_0_b),
.sg(pc_iu_sg_0),
.force_t(force_t),
.delay_lclkr(delay_lclkr),
.mpw1_b(mpw1_b),
.mpw2_b(mpw2_b),
.d_mode(d_mode),
.scin(siv[data_out_offset:data_out_offset + (2*`EFF_IFAR_WIDTH+2+1) - 1]),
.scout(sov[data_out_offset:data_out_offset + (2*`EFF_IFAR_WIDTH+2+1) - 1]),
.din(data_out_d),
.dout(data_out_q)
);
tri_rlmreg_p #(.WIDTH(6), .INIT(0)) reset_w_addr_reg(
.vd(vdd),
.gd(gnd),
.clk(clk),
.rst(rst),
.act(reset_act),
.thold_b(pc_iu_func_sl_thold_0_b),
.sg(pc_iu_sg_0),
.force_t(force_t),
.delay_lclkr(delay_lclkr),
.mpw1_b(mpw1_b),
.mpw2_b(mpw2_b),
.d_mode(d_mode),
.scin(siv[reset_w_addr_offset:reset_w_addr_offset + 6 - 1]),
.scout(sov[reset_w_addr_offset:reset_w_addr_offset + 6 - 1]),
.din(reset_w_addr_d),
.dout(reset_w_addr_q)
);
//-----------------------------------------------
// pervasive
//-----------------------------------------------
tri_plat #(.WIDTH(3)) perv_2to1_reg(
.vd(vdd),
.gd(gnd),
.clk(clk),
.rst(rst),
.flush(tc_ac_ccflush_dc),
.din({pc_iu_func_sl_thold_2, pc_iu_sg_2, pc_iu_fce_2}),
.q({pc_iu_func_sl_thold_1, pc_iu_sg_1, pc_iu_fce_1})
);
tri_plat #(.WIDTH(3)) perv_1to0_reg(
.vd(vdd),
.gd(gnd),
.clk(clk),
.rst(rst),
.flush(tc_ac_ccflush_dc),
.din({pc_iu_func_sl_thold_1, pc_iu_sg_1, pc_iu_fce_1}),
.q({pc_iu_func_sl_thold_0, pc_iu_sg_0, pc_iu_fce_0})
);
tri_lcbor perv_lcbor(
.clkoff_b(clkoff_b),
.thold(pc_iu_func_sl_thold_0),
.sg(pc_iu_sg_0),
.act_dis(act_dis),
.force_t(force_t),
.thold_b(pc_iu_func_sl_thold_0_b)
);
//-----------------------------------------------
// scan
//-----------------------------------------------
assign siv[0:scan_right] = {scan_in, sov[0:scan_right - 1]};
assign scan_out = sov[scan_right];
endmodule