cores
/
a2p
mirror of https://github.com/OpenPOWERFoundation/a2p
2
0
Fork 0
Code Issues Projects Releases Wiki Activity
You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
master
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from '92888a5364'
${ noResults }
a2p/build/litex/litex-1099/no_master/make-uarts.txt

1764 lines
187 KiB
Plaintext
Raw Blame History

Compat: SoCSDRAM is deprecated since 2020-03-24 and will soon no longer work, please update. Switch to SoCCore/add_sdram/soc_core_args instead...........thanks :)
Namespace(build=True, bus_address_width=32, bus_data_width=32, bus_standard='wishbone', bus_timeout=1000000.0, cpu_cfu=None, cpu_reset_address=None, cpu_type=None, cpu_variant=None, csr_address_width=14, csr_csv='csr.csv', csr_data_width=None, csr_json=None, csr_ordering='big', csr_paging=2048, csr_svd=None, doc=False, gateware_dir=None, generated_dir=None, ident=None, ident_version=None, include_dir=None, integrated_main_ram_size=None, integrated_rom_init=None, integrated_rom_size=131072, integrated_sram_size=8192, l2_size=8192, load=False, memory_x=None, no_compile_gateware=False, no_compile_software=True, no_ctrl=False, no_timer=False, no_uart=False, output_dir=None, software_dir=None, sys_clk_freq=100000000.0, timer_uptime=False, uart_baudrate=None, uart_fifo_depth=16, uart_name='serial', with_analyzer=False)
directory0
csr_08000
****** Vivado v2020.2 (64-bit)
**** SW Build 3064766 on Wed Nov 18 09:12:47 MST 2020
**** IP Build 3064653 on Wed Nov 18 14:17:31 MST 2020
** Copyright 1986-2020 Xilinx, Inc. All Rights Reserved.
source cmod7.tcl
# create_project -force -name cmod7 -part xc7a35t-CPG236-1
# set_msg_config -id {Common 17-55} -new_severity {Warning}
# read_verilog {/home/wtf/projects/a2p-opf/build/litex/modules/issiram.v}
# read_verilog {/home/wtf/projects/a2p-opf/build/litex/a2p/verilog/A2P_WB.v}
# read_verilog {/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v}
# read_xdc cmod7.xdc
# set_property PROCESSING_ORDER EARLY [get_files cmod7.xdc]
# synth_design -directive default -top cmod7 -part xc7a35t-CPG236-1
Command: synth_design -directive default -top cmod7 -part xc7a35t-CPG236-1
Starting synth_design
Attempting to get a license for feature 'Synthesis' and/or device 'xc7a35t'
INFO: [Common 17-349] Got license for feature 'Synthesis' and/or device 'xc7a35t'
INFO: [Device 21-403] Loading part xc7a35tcpg236-1
INFO: [Synth 8-7079] Multithreading enabled for synth_design using a maximum of 4 processes.
INFO: [Synth 8-7078] Launching helper process for spawning children vivado processes
INFO: [Synth 8-7075] Helper process launched with PID 580129
WARNING: [Synth 8-2292] literal value truncated to fit in 1 bits [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:278]
WARNING: [Synth 8-2292] literal value truncated to fit in 1 bits [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:2287]
---------------------------------------------------------------------------------
Starting RTL Elaboration : Time (s): cpu = 00:00:04 ; elapsed = 00:00:04 . Memory (MB): peak = 2298.785 ; gain = 0.000 ; free physical = 329 ; free virtual = 10263
---------------------------------------------------------------------------------
INFO: [Synth 8-6157] synthesizing module 'cmod7' [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:20]
INFO: [Synth 8-3876] $readmem data file 'mem.init' is read successfully [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:2354]
INFO: [Synth 8-3876] $readmem data file 'mem_1.init' is read successfully [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:2431]
INFO: [Synth 8-155] case statement is not full and has no default [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1912]
INFO: [Synth 8-155] case statement is not full and has no default [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:2028]
INFO: [Synth 8-155] case statement is not full and has no default [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:2037]
INFO: [Synth 8-155] case statement is not full and has no default [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:2060]
INFO: [Synth 8-155] case statement is not full and has no default [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:2072]
INFO: [Synth 8-155] case statement is not full and has no default [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:2084]
INFO: [Synth 8-155] case statement is not full and has no default [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:2101]
INFO: [Synth 8-155] case statement is not full and has no default [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:2113]
INFO: [Synth 8-155] case statement is not full and has no default [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:2168]
INFO: [Synth 8-155] case statement is not full and has no default [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:2210]
INFO: [Synth 8-6157] synthesizing module 'BUFG' [/tools/Xilinx/Vivado/2020.2/scripts/rt/data/unisim_comp.v:1083]
INFO: [Synth 8-6155] done synthesizing module 'BUFG' (1#1) [/tools/Xilinx/Vivado/2020.2/scripts/rt/data/unisim_comp.v:1083]
WARNING: [Synth 8-4446] all outputs are unconnected for this instance and logic may be removed [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:2420]
INFO: [Synth 8-6157] synthesizing module 'IDELAYCTRL' [/tools/Xilinx/Vivado/2020.2/scripts/rt/data/unisim_comp.v:35060]
Parameter SIM_DEVICE bound to: 7SERIES - type: string
INFO: [Synth 8-6155] done synthesizing module 'IDELAYCTRL' (2#1) [/tools/Xilinx/Vivado/2020.2/scripts/rt/data/unisim_comp.v:35060]
WARNING: [Synth 8-7071] port 'RDY' of module 'IDELAYCTRL' is unconnected for instance 'IDELAYCTRL' [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:2420]
WARNING: [Synth 8-7023] instance 'IDELAYCTRL' of module 'IDELAYCTRL' has 3 connections declared, but only 2 given [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:2420]
INFO: [Synth 8-6157] synthesizing module 'issiram' [/home/wtf/projects/a2p-opf/build/litex/modules/issiram.v:41]
Parameter WB_BITWIDTH bound to: 32 - type: integer
Parameter RAM_BITWIDTH bound to: 8 - type: integer
INFO: [Synth 8-6155] done synthesizing module 'issiram' (3#1) [/home/wtf/projects/a2p-opf/build/litex/modules/issiram.v:41]
INFO: [Synth 8-6157] synthesizing module 'DNA_PORT' [/tools/Xilinx/Vivado/2020.2/scripts/rt/data/unisim_comp.v:11984]
Parameter SIM_DNA_VALUE bound to: 57'b000000000000000000000000000000000000000000000000000000000
INFO: [Synth 8-6155] done synthesizing module 'DNA_PORT' (4#1) [/tools/Xilinx/Vivado/2020.2/scripts/rt/data/unisim_comp.v:11984]
INFO: [Synth 8-6157] synthesizing module 'XADC' [/tools/Xilinx/Vivado/2020.2/scripts/rt/data/unisim_comp.v:82182]
Parameter INIT_40 bound to: 16'b1001000000000000
Parameter INIT_41 bound to: 16'b0010111011110000
Parameter INIT_42 bound to: 16'b0000010000000000
Parameter INIT_43 bound to: 16'b0000000000000000
Parameter INIT_44 bound to: 16'b0000000000000000
Parameter INIT_45 bound to: 16'b0000000000000000
Parameter INIT_46 bound to: 16'b0000000000000000
Parameter INIT_47 bound to: 16'b0000000000000000
Parameter INIT_48 bound to: 16'b0100011100000001
Parameter INIT_49 bound to: 16'b0000000000001111
Parameter INIT_4A bound to: 16'b0100011100000000
Parameter INIT_4B bound to: 16'b0000000000000000
Parameter INIT_4C bound to: 16'b0000000000000000
Parameter INIT_4D bound to: 16'b0000000000000000
Parameter INIT_4E bound to: 16'b0000000000000000
Parameter INIT_4F bound to: 16'b0000000000000000
Parameter INIT_50 bound to: 16'b1011010111101101
Parameter INIT_51 bound to: 16'b0101100110011001
Parameter INIT_52 bound to: 16'b1010000101000111
Parameter INIT_53 bound to: 16'b1101110111011101
Parameter INIT_54 bound to: 16'b1010100100111010
Parameter INIT_55 bound to: 16'b0101000100010001
Parameter INIT_56 bound to: 16'b1001000111101011
Parameter INIT_57 bound to: 16'b1010111001001110
Parameter INIT_58 bound to: 16'b0101100110011001
Parameter INIT_59 bound to: 16'b0000000000000000
Parameter INIT_5A bound to: 16'b0000000000000000
Parameter INIT_5B bound to: 16'b0000000000000000
Parameter INIT_5C bound to: 16'b0101000100010001
Parameter INIT_5D bound to: 16'b0000000000000000
Parameter INIT_5E bound to: 16'b0000000000000000
Parameter INIT_5F bound to: 16'b0000000000000000
Parameter IS_CONVSTCLK_INVERTED bound to: 1'b0
Parameter IS_DCLK_INVERTED bound to: 1'b0
Parameter SIM_DEVICE bound to: 7SERIES - type: string
Parameter SIM_MONITOR_FILE bound to: design.txt - type: string
INFO: [Synth 8-6155] done synthesizing module 'XADC' (5#1) [/tools/Xilinx/Vivado/2020.2/scripts/rt/data/unisim_comp.v:82182]
WARNING: [Synth 8-689] width (7) of port connection 'CHANNEL' does not match port width (5) of module 'XADC' [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:2503]
WARNING: [Synth 8-7071] port 'JTAGBUSY' of module 'XADC' is unconnected for instance 'XADC' [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:2488]
WARNING: [Synth 8-7071] port 'JTAGLOCKED' of module 'XADC' is unconnected for instance 'XADC' [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:2488]
WARNING: [Synth 8-7071] port 'JTAGMODIFIED' of module 'XADC' is unconnected for instance 'XADC' [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:2488]
WARNING: [Synth 8-7071] port 'MUXADDR' of module 'XADC' is unconnected for instance 'XADC' [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:2488]
WARNING: [Synth 8-7023] instance 'XADC' of module 'XADC' has 24 connections declared, but only 20 given [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:2488]
INFO: [Synth 8-6157] synthesizing module 'A2P_WB' [/home/wtf/projects/a2p-opf/build/litex/a2p/verilog/A2P_WB.v:1183]
INFO: [Synth 8-6157] synthesizing module 'InstructionCache' [/home/wtf/projects/a2p-opf/build/litex/a2p/verilog/A2P_WB.v:164]
INFO: [Synth 8-6155] done synthesizing module 'InstructionCache' (6#1) [/home/wtf/projects/a2p-opf/build/litex/a2p/verilog/A2P_WB.v:164]
INFO: [Synth 8-6157] synthesizing module 'DataCache' [/home/wtf/projects/a2p-opf/build/litex/a2p/verilog/A2P_WB.v:465]
INFO: [Synth 8-6155] done synthesizing module 'DataCache' (7#1) [/home/wtf/projects/a2p-opf/build/litex/a2p/verilog/A2P_WB.v:465]
INFO: [Synth 8-6155] done synthesizing module 'A2P_WB' (8#1) [/home/wtf/projects/a2p-opf/build/litex/a2p/verilog/A2P_WB.v:1183]
INFO: [Synth 8-6157] synthesizing module 'FD' [/tools/Xilinx/Vivado/2020.2/scripts/rt/data/unisim_comp.v:13483]
Parameter INIT bound to: 1'b0
INFO: [Synth 8-6155] done synthesizing module 'FD' (9#1) [/tools/Xilinx/Vivado/2020.2/scripts/rt/data/unisim_comp.v:13483]
INFO: [Synth 8-6157] synthesizing module 'MMCME2_ADV' [/tools/Xilinx/Vivado/2020.2/scripts/rt/data/unisim_comp.v:39998]
Parameter BANDWIDTH bound to: OPTIMIZED - type: string
Parameter CLKFBOUT_MULT_F bound to: 50.000000 - type: double
Parameter CLKFBOUT_PHASE bound to: 0.000000 - type: double
Parameter CLKFBOUT_USE_FINE_PS bound to: FALSE - type: string
Parameter CLKIN1_PERIOD bound to: 83.333333 - type: double
Parameter CLKIN2_PERIOD bound to: 0.000000 - type: double
Parameter CLKOUT0_DIVIDE_F bound to: 6.000000 - type: double
Parameter CLKOUT0_DUTY_CYCLE bound to: 0.500000 - type: double
Parameter CLKOUT0_PHASE bound to: 0.000000 - type: double
Parameter CLKOUT0_USE_FINE_PS bound to: FALSE - type: string
Parameter CLKOUT1_DIVIDE bound to: 3 - type: integer
Parameter CLKOUT1_DUTY_CYCLE bound to: 0.500000 - type: double
Parameter CLKOUT1_PHASE bound to: 0.000000 - type: double
Parameter CLKOUT1_USE_FINE_PS bound to: FALSE - type: string
Parameter CLKOUT2_DIVIDE bound to: 3 - type: integer
Parameter CLKOUT2_DUTY_CYCLE bound to: 0.500000 - type: double
Parameter CLKOUT2_PHASE bound to: 0.000000 - type: double
Parameter CLKOUT2_USE_FINE_PS bound to: FALSE - type: string
Parameter CLKOUT3_DIVIDE bound to: 1 - type: integer
Parameter CLKOUT3_DUTY_CYCLE bound to: 0.500000 - type: double
Parameter CLKOUT3_PHASE bound to: 0.000000 - type: double
Parameter CLKOUT3_USE_FINE_PS bound to: FALSE - type: string
Parameter CLKOUT4_CASCADE bound to: FALSE - type: string
Parameter CLKOUT4_DIVIDE bound to: 1 - type: integer
Parameter CLKOUT4_DUTY_CYCLE bound to: 0.500000 - type: double
Parameter CLKOUT4_PHASE bound to: 0.000000 - type: double
Parameter CLKOUT4_USE_FINE_PS bound to: FALSE - type: string
Parameter CLKOUT5_DIVIDE bound to: 1 - type: integer
Parameter CLKOUT5_DUTY_CYCLE bound to: 0.500000 - type: double
Parameter CLKOUT5_PHASE bound to: 0.000000 - type: double
Parameter CLKOUT5_USE_FINE_PS bound to: FALSE - type: string
Parameter CLKOUT6_DIVIDE bound to: 1 - type: integer
Parameter CLKOUT6_DUTY_CYCLE bound to: 0.500000 - type: double
Parameter CLKOUT6_PHASE bound to: 0.000000 - type: double
Parameter CLKOUT6_USE_FINE_PS bound to: FALSE - type: string
Parameter COMPENSATION bound to: ZHOLD - type: string
Parameter DIVCLK_DIVIDE bound to: 1 - type: integer
Parameter IS_CLKINSEL_INVERTED bound to: 1'b0
Parameter IS_PSEN_INVERTED bound to: 1'b0
Parameter IS_PSINCDEC_INVERTED bound to: 1'b0
Parameter IS_PWRDWN_INVERTED bound to: 1'b0
Parameter IS_RST_INVERTED bound to: 1'b0
Parameter REF_JITTER1 bound to: 0.010000 - type: double
Parameter REF_JITTER2 bound to: 0.010000 - type: double
Parameter SS_EN bound to: FALSE - type: string
Parameter SS_MODE bound to: CENTER_HIGH - type: string
Parameter SS_MOD_PERIOD bound to: 10000 - type: integer
Parameter STARTUP_WAIT bound to: FALSE - type: string
INFO: [Synth 8-6155] done synthesizing module 'MMCME2_ADV' (10#1) [/tools/Xilinx/Vivado/2020.2/scripts/rt/data/unisim_comp.v:39998]
WARNING: [Synth 8-7071] port 'CLKFBOUTB' of module 'MMCME2_ADV' is unconnected for instance 'MMCME2_ADV' [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:2608]
WARNING: [Synth 8-7071] port 'CLKFBSTOPPED' of module 'MMCME2_ADV' is unconnected for instance 'MMCME2_ADV' [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:2608]
WARNING: [Synth 8-7071] port 'CLKINSTOPPED' of module 'MMCME2_ADV' is unconnected for instance 'MMCME2_ADV' [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:2608]
WARNING: [Synth 8-7071] port 'CLKOUT0B' of module 'MMCME2_ADV' is unconnected for instance 'MMCME2_ADV' [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:2608]
WARNING: [Synth 8-7071] port 'CLKOUT1B' of module 'MMCME2_ADV' is unconnected for instance 'MMCME2_ADV' [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:2608]
WARNING: [Synth 8-7071] port 'CLKOUT2B' of module 'MMCME2_ADV' is unconnected for instance 'MMCME2_ADV' [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:2608]
WARNING: [Synth 8-7071] port 'CLKOUT3' of module 'MMCME2_ADV' is unconnected for instance 'MMCME2_ADV' [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:2608]
WARNING: [Synth 8-7071] port 'CLKOUT3B' of module 'MMCME2_ADV' is unconnected for instance 'MMCME2_ADV' [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:2608]
WARNING: [Synth 8-7071] port 'CLKOUT4' of module 'MMCME2_ADV' is unconnected for instance 'MMCME2_ADV' [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:2608]
WARNING: [Synth 8-7071] port 'CLKOUT5' of module 'MMCME2_ADV' is unconnected for instance 'MMCME2_ADV' [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:2608]
WARNING: [Synth 8-7071] port 'CLKOUT6' of module 'MMCME2_ADV' is unconnected for instance 'MMCME2_ADV' [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:2608]
WARNING: [Synth 8-7071] port 'DO' of module 'MMCME2_ADV' is unconnected for instance 'MMCME2_ADV' [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:2608]
WARNING: [Synth 8-7071] port 'DRDY' of module 'MMCME2_ADV' is unconnected for instance 'MMCME2_ADV' [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:2608]
WARNING: [Synth 8-7071] port 'PSDONE' of module 'MMCME2_ADV' is unconnected for instance 'MMCME2_ADV' [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:2608]
WARNING: [Synth 8-7071] port 'CLKIN2' of module 'MMCME2_ADV' is unconnected for instance 'MMCME2_ADV' [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:2608]
WARNING: [Synth 8-7071] port 'CLKINSEL' of module 'MMCME2_ADV' is unconnected for instance 'MMCME2_ADV' [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:2608]
WARNING: [Synth 8-7071] port 'DADDR' of module 'MMCME2_ADV' is unconnected for instance 'MMCME2_ADV' [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:2608]
WARNING: [Synth 8-7071] port 'DCLK' of module 'MMCME2_ADV' is unconnected for instance 'MMCME2_ADV' [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:2608]
WARNING: [Synth 8-7071] port 'DEN' of module 'MMCME2_ADV' is unconnected for instance 'MMCME2_ADV' [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:2608]
WARNING: [Synth 8-7071] port 'DI' of module 'MMCME2_ADV' is unconnected for instance 'MMCME2_ADV' [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:2608]
WARNING: [Synth 8-7071] port 'DWE' of module 'MMCME2_ADV' is unconnected for instance 'MMCME2_ADV' [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:2608]
WARNING: [Synth 8-7071] port 'PSCLK' of module 'MMCME2_ADV' is unconnected for instance 'MMCME2_ADV' [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:2608]
WARNING: [Synth 8-7071] port 'PSEN' of module 'MMCME2_ADV' is unconnected for instance 'MMCME2_ADV' [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:2608]
WARNING: [Synth 8-7071] port 'PSINCDEC' of module 'MMCME2_ADV' is unconnected for instance 'MMCME2_ADV' [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:2608]
WARNING: [Synth 8-7023] instance 'MMCME2_ADV' of module 'MMCME2_ADV' has 33 connections declared, but only 9 given [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:2608]
INFO: [Synth 8-6157] synthesizing module 'FDPE' [/tools/Xilinx/Vivado/2020.2/scripts/rt/data/unisim_comp.v:13664]
Parameter INIT bound to: 1'b1
Parameter IS_C_INVERTED bound to: 1'b0
Parameter IS_D_INVERTED bound to: 1'b0
Parameter IS_PRE_INVERTED bound to: 1'b0
INFO: [Synth 8-6155] done synthesizing module 'FDPE' (11#1) [/tools/Xilinx/Vivado/2020.2/scripts/rt/data/unisim_comp.v:13664]
INFO: [Synth 8-6155] done synthesizing module 'cmod7' (12#1) [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:20]
---------------------------------------------------------------------------------
Finished RTL Elaboration : Time (s): cpu = 00:00:07 ; elapsed = 00:00:08 . Memory (MB): peak = 2298.785 ; gain = 0.000 ; free physical = 1042 ; free virtual = 10973
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Start Handling Custom Attributes
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Finished Handling Custom Attributes : Time (s): cpu = 00:00:08 ; elapsed = 00:00:09 . Memory (MB): peak = 2298.785 ; gain = 0.000 ; free physical = 1059 ; free virtual = 10989
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Finished RTL Optimization Phase 1 : Time (s): cpu = 00:00:08 ; elapsed = 00:00:09 . Memory (MB): peak = 2298.785 ; gain = 0.000 ; free physical = 1059 ; free virtual = 10989
---------------------------------------------------------------------------------
Netlist sorting complete. Time (s): cpu = 00:00:00.15 ; elapsed = 00:00:00.16 . Memory (MB): peak = 2298.785 ; gain = 0.000 ; free physical = 1043 ; free virtual = 10974
INFO: [Netlist 29-17] Analyzing 10 Unisim elements for replacement
INFO: [Netlist 29-28] Unisim Transformation completed in 0 CPU seconds
INFO: [Project 1-570] Preparing netlist for logic optimization
Processing XDC Constraints
Initializing timing engine
Parsing XDC File [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.xdc]
WARNING: [Vivado 12-507] No nets matched 'clk12'. [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.xdc:211]
CRITICAL WARNING: [Vivado 12-4739] create_clock:No valid object(s) found for '-objects [get_nets clk12]'. [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.xdc:211]
Resolution: Check if the specified object(s) exists in the current design. If it does, ensure that the correct design hierarchy was specified for the object. If you are working with clocks, make sure create_clock was used to create the clock object before it is referenced.
WARNING: [Vivado 12-1008] No clocks found for command 'get_clocks -include_generated_clocks -of [get_nets sys_clk]'. [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.xdc:213]
Resolution: Verify the create_clock command was called to create the clock object before it is referenced.
INFO: [Vivado 12-626] No clocks found. Please use 'create_clock' or 'create_generated_clock' command to create clocks. [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.xdc:213]
WARNING: [Vivado 12-1008] No clocks found for command 'get_clocks -include_generated_clocks -of [get_nets crg_clkin]'. [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.xdc:213]
Resolution: Verify the create_clock command was called to create the clock object before it is referenced.
INFO: [Vivado 12-626] No clocks found. Please use 'create_clock' or 'create_generated_clock' command to create clocks. [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.xdc:213]
CRITICAL WARNING: [Vivado 12-4739] set_clock_groups:No valid object(s) found for '-group [get_clocks -of_objects [get_nets sys_clk]]'. [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.xdc:213]
Resolution: Check if the specified object(s) exists in the current design. If it does, ensure that the correct design hierarchy was specified for the object. If you are working with clocks, make sure create_clock was used to create the clock object before it is referenced.
CRITICAL WARNING: [Vivado 12-4739] set_clock_groups:No valid object(s) found for '-group '. [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.xdc:213]
Resolution: Check if the specified object(s) exists in the current design. If it does, ensure that the correct design hierarchy was specified for the object. If you are working with clocks, make sure create_clock was used to create the clock object before it is referenced.
CRITICAL WARNING: [Vivado 12-4739] set_clock_groups:No valid object(s) found for '-group [get_clocks -of_objects [get_nets crg_clkin]]'. [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.xdc:213]
Resolution: Check if the specified object(s) exists in the current design. If it does, ensure that the correct design hierarchy was specified for the object. If you are working with clocks, make sure create_clock was used to create the clock object before it is referenced.
CRITICAL WARNING: [Vivado 12-4739] set_clock_groups:No valid object(s) found for '-group '. [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.xdc:213]
Resolution: Check if the specified object(s) exists in the current design. If it does, ensure that the correct design hierarchy was specified for the object. If you are working with clocks, make sure create_clock was used to create the clock object before it is referenced.
CRITICAL WARNING: [Constraints 18-4644] set_clock_groups: All clock groups specified are empty. Please specify atleast one clock group which is not empty. [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.xdc:213]
Finished Parsing XDC File [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.xdc]
INFO: [Project 1-236] Implementation specific constraints were found while reading constraint file [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.xdc]. These constraints will be ignored for synthesis but will be used in implementation. Impacted constraints are listed in the file [.Xil/cmod7_propImpl.xdc].
Resolution: To avoid this warning, move constraints listed in [.Xil/cmod7_propImpl.xdc] to another XDC file and exclude this new file from synthesis with the used_in_synthesis property (File Properties dialog in GUI) and re-run elaboration/synthesis.
Completed Processing XDC Constraints
Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 2411.500 ; gain = 0.000 ; free physical = 944 ; free virtual = 10875
INFO: [Project 1-111] Unisim Transformation Summary:
A total of 8 instances were transformed.
FD => FDRE: 8 instances
Constraint Validation Runtime : Time (s): cpu = 00:00:00.02 ; elapsed = 00:00:00.03 . Memory (MB): peak = 2411.500 ; gain = 0.000 ; free physical = 944 ; free virtual = 10875
---------------------------------------------------------------------------------
Finished Constraint Validation : Time (s): cpu = 00:00:16 ; elapsed = 00:00:17 . Memory (MB): peak = 2411.500 ; gain = 112.715 ; free physical = 1043 ; free virtual = 10973
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Start Loading Part and Timing Information
---------------------------------------------------------------------------------
Loading part: xc7a35tcpg236-1
---------------------------------------------------------------------------------
Finished Loading Part and Timing Information : Time (s): cpu = 00:00:16 ; elapsed = 00:00:17 . Memory (MB): peak = 2411.500 ; gain = 112.715 ; free physical = 1043 ; free virtual = 10973
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Start Applying 'set_property' XDC Constraints
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Finished applying 'set_property' XDC Constraints : Time (s): cpu = 00:00:17 ; elapsed = 00:00:18 . Memory (MB): peak = 2411.500 ; gain = 112.715 ; free physical = 1043 ; free virtual = 10973
---------------------------------------------------------------------------------
INFO: [Synth 8-3971] The signal "A2P_WB:/RegFilePlugin_regFile_reg" was recognized as a true dual port RAM template.
---------------------------------------------------------------------------------
Finished RTL Optimization Phase 2 : Time (s): cpu = 00:00:22 ; elapsed = 00:00:24 . Memory (MB): peak = 2411.500 ; gain = 112.715 ; free physical = 1023 ; free virtual = 10956
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Start RTL Component Statistics
---------------------------------------------------------------------------------
Detailed RTL Component Info :
+---Adders :
2 Input 64 Bit Adders := 1
3 Input 52 Bit Adders := 1
3 Input 33 Bit Adders := 2
2 Input 33 Bit Adders := 5
2 Input 32 Bit Adders := 10
2 Input 10 Bit Adders := 1
2 Input 8 Bit Adders := 3
2 Input 7 Bit Adders := 2
2 Input 6 Bit Adders := 2
31 Input 6 Bit Adders := 1
2 Input 5 Bit Adders := 2
7 Input 4 Bit Adders := 4
2 Input 4 Bit Adders := 11
2 Input 3 Bit Adders := 5
2 Input 2 Bit Adders := 6
4 Input 2 Bit Adders := 2
16 Input 1 Bit Adders := 2
8 Input 1 Bit Adders := 1
12 Input 1 Bit Adders := 2
13 Input 1 Bit Adders := 1
15 Input 1 Bit Adders := 1
19 Input 1 Bit Adders := 1
3 Input 1 Bit Adders := 1
4 Input 1 Bit Adders := 1
11 Input 1 Bit Adders := 1
2 Input 1 Bit Adders := 1
+---XORs :
2 Input 32 Bit XORs := 2
2 Input 1 Bit XORs := 6
4 Input 1 Bit XORs := 1
+---Registers :
65 Bit Registers := 1
57 Bit Registers := 1
54 Bit Registers := 1
52 Bit Registers := 1
34 Bit Registers := 1
33 Bit Registers := 1
32 Bit Registers := 75
22 Bit Registers := 2
20 Bit Registers := 2
19 Bit Registers := 1
12 Bit Registers := 4
11 Bit Registers := 2
10 Bit Registers := 1
8 Bit Registers := 19
7 Bit Registers := 1
6 Bit Registers := 2
5 Bit Registers := 21
4 Bit Registers := 18
3 Bit Registers := 14
2 Bit Registers := 27
1 Bit Registers := 213
+---RAMs :
54K Bit (1024 X 54 bit) RAMs := 1
32K Bit (1024 X 32 bit) RAMs := 1
8K Bit (1024 X 8 bit) RAMs := 4
2K Bit (128 X 22 bit) RAMs := 2
1024 Bit (32 X 32 bit) RAMs := 1
160 Bit (16 X 10 bit) RAMs := 2
+---ROMs :
ROMs := 1
+---Muxes :
2 Input 33 Bit Muxes := 3
2 Input 32 Bit Muxes := 138
3 Input 32 Bit Muxes := 1
4 Input 32 Bit Muxes := 7
8 Input 32 Bit Muxes := 5
20 Input 32 Bit Muxes := 1
6 Input 32 Bit Muxes := 2
7 Input 32 Bit Muxes := 1
2 Input 31 Bit Muxes := 1
2 Input 30 Bit Muxes := 1
2 Input 26 Bit Muxes := 3
2 Input 20 Bit Muxes := 1
2 Input 19 Bit Muxes := 1
2 Input 16 Bit Muxes := 5
2 Input 14 Bit Muxes := 2
18 Input 12 Bit Muxes := 1
2 Input 12 Bit Muxes := 1
2 Input 11 Bit Muxes := 3
3 Input 11 Bit Muxes := 1
2 Input 10 Bit Muxes := 4
4 Input 8 Bit Muxes := 2
2 Input 8 Bit Muxes := 22
3 Input 8 Bit Muxes := 5
5 Input 8 Bit Muxes := 2
7 Input 8 Bit Muxes := 3
25 Input 8 Bit Muxes := 1
2 Input 7 Bit Muxes := 9
2 Input 6 Bit Muxes := 6
7 Input 5 Bit Muxes := 1
2 Input 5 Bit Muxes := 15
3 Input 5 Bit Muxes := 1
8 Input 5 Bit Muxes := 1
6 Input 5 Bit Muxes := 1
4 Input 5 Bit Muxes := 1
2 Input 4 Bit Muxes := 22
8 Input 4 Bit Muxes := 9
3 Input 4 Bit Muxes := 1
3 Input 3 Bit Muxes := 2
2 Input 3 Bit Muxes := 6
20 Input 3 Bit Muxes := 1
8 Input 3 Bit Muxes := 1
10 Input 3 Bit Muxes := 1
2 Input 2 Bit Muxes := 9
4 Input 2 Bit Muxes := 2
7 Input 2 Bit Muxes := 1
2 Input 1 Bit Muxes := 287
5 Input 1 Bit Muxes := 9
8 Input 1 Bit Muxes := 4
7 Input 1 Bit Muxes := 10
20 Input 1 Bit Muxes := 2
32 Input 1 Bit Muxes := 1
6 Input 1 Bit Muxes := 6
4 Input 1 Bit Muxes := 9
---------------------------------------------------------------------------------
Finished RTL Component Statistics
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Start Part Resource Summary
---------------------------------------------------------------------------------
Part Resources:
DSPs: 90 (col length:60)
BRAMs: 100 (col length: RAMB18 60 RAMB36 30)
---------------------------------------------------------------------------------
Finished Part Resource Summary
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Start Cross Boundary and Area Optimization
---------------------------------------------------------------------------------
DSP Report: Generating DSP memory_to_writeBack_MUL_HH_reg, operation Mode is: (A*B)'.
DSP Report: register memory_to_writeBack_MUL_HH_reg is absorbed into DSP memory_to_writeBack_MUL_HH_reg.
DSP Report: register execute_to_memory_MUL_HH_reg is absorbed into DSP memory_to_writeBack_MUL_HH_reg.
DSP Report: operator execute_MUL_HH is absorbed into DSP memory_to_writeBack_MUL_HH_reg.
DSP Report: Generating DSP execute_to_memory_MUL_LH_reg, operation Mode is: (A*B)'.
DSP Report: register execute_to_memory_MUL_LH_reg is absorbed into DSP execute_to_memory_MUL_LH_reg.
DSP Report: operator execute_MUL_LH is absorbed into DSP execute_to_memory_MUL_LH_reg.
DSP Report: Generating DSP execute_to_memory_MUL_HL_reg, operation Mode is: (A*B)'.
DSP Report: register execute_to_memory_MUL_HL_reg is absorbed into DSP execute_to_memory_MUL_HL_reg.
DSP Report: operator execute_MUL_HL is absorbed into DSP execute_to_memory_MUL_HL_reg.
DSP Report: Generating DSP execute_to_memory_MUL_LL_reg, operation Mode is: (A*B)'.
DSP Report: register execute_to_memory_MUL_LL_reg is absorbed into DSP execute_to_memory_MUL_LL_reg.
DSP Report: operator execute_MUL_LL is absorbed into DSP execute_to_memory_MUL_LL_reg.
INFO: [Synth 8-3971] The signal "A2P_WB/RegFilePlugin_regFile_reg" was recognized as a true dual port RAM template.
---------------------------------------------------------------------------------
Finished Cross Boundary and Area Optimization : Time (s): cpu = 00:01:24 ; elapsed = 00:01:26 . Memory (MB): peak = 2434.484 ; gain = 135.699 ; free physical = 981 ; free virtual = 10928
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Start ROM, RAM, DSP, Shift Register and Retiming Reporting
---------------------------------------------------------------------------------
ROM: Preliminary Mapping Report
+------------+----------------+---------------+----------------+
|Module Name | RTL Object | Depth x Width | Implemented As |
+------------+----------------+---------------+----------------+
|cmod7 | mem_1_dat0_reg | 16384x32 | Block RAM |
+------------+----------------+---------------+----------------+
Block RAM: Preliminary Mapping Report (see note below)
+------------------------------+----------------------------------------+------------------------+---+---+------------------------+---+---+------------------+--------+--------+
|Module Name | RTL Object | PORT A (Depth x Width) | W | R | PORT B (Depth x Width) | W | R | Ports driving FF | RAMB18 | RAMB36 |
+------------------------------+----------------------------------------+------------------------+---+---+------------------------+---+---+------------------+--------+--------+
|A2P_WB/IBusCachedPlugin_cache | ways_0_datas_reg | 1 K x 32(READ_FIRST) | W | | 1 K x 32(WRITE_FIRST) | | R | Port A and B | 0 | 1 |
|A2P_WB/IBusCachedPlugin_cache | ways_0_tags_reg | 128 x 22(READ_FIRST) | W | | 128 x 22(WRITE_FIRST) | | R | Port A and B | 1 | 0 |
|A2P_WB/dataCache_1_ | DC_DIR_tags_reg | 128 x 22(READ_FIRST) | W | | 128 x 22(WRITE_FIRST) | | R | Port A and B | 1 | 0 |
|A2P_WB/dataCache_1_ | DC_DIR_data_symbol0_reg | 1 K x 8(READ_FIRST) | W | | 1 K x 8(WRITE_FIRST) | | R | Port A and B | 1 | 0 |
|A2P_WB/dataCache_1_ | DC_DIR_data_symbol1_reg | 1 K x 8(READ_FIRST) | W | | 1 K x 8(WRITE_FIRST) | | R | Port A and B | 1 | 0 |
|A2P_WB/dataCache_1_ | DC_DIR_data_symbol2_reg | 1 K x 8(READ_FIRST) | W | | 1 K x 8(WRITE_FIRST) | | R | Port A and B | 1 | 0 |
|A2P_WB/dataCache_1_ | DC_DIR_data_symbol3_reg | 1 K x 8(READ_FIRST) | W | | 1 K x 8(WRITE_FIRST) | | R | Port A and B | 1 | 0 |
|A2P_WB | IBusCachedPlugin_predictor_history_reg | 1 K x 54(READ_FIRST) | W | | 1 K x 54(WRITE_FIRST) | | R | Port A and B | 1 | 1 |
+------------------------------+----------------------------------------+------------------------+---+---+------------------------+---+---+------------------+--------+--------+
Note: The table above is a preliminary report that shows the Block RAMs at the current stage of the synthesis flow. Some Block RAMs may be reimplemented as non Block RAM primitives later in the synthesis flow. Multiple instantiated Block RAMs are reported only once.
Distributed RAM: Preliminary Mapping Report (see note below)
+------------+---------------+-----------+----------------------+-------------+
|Module Name | RTL Object | Inference | Size (Depth x Width) | Primitives |
+------------+---------------+-----------+----------------------+-------------+
|cmod7 | storage_reg | Implied | 16 x 8 | RAM32M x 2 |
|cmod7 | storage_1_reg | Implied | 16 x 8 | RAM32M x 2 |
+------------+---------------+-----------+----------------------+-------------+
Note: The table above is a preliminary report that shows the Distributed RAMs at the current stage of the synthesis flow. Some Distributed RAMs may be reimplemented as non Distributed RAM primitives later in the synthesis flow. Multiple instantiated RAMs are reported only once.
DSP: Preliminary Mapping Report (see note below)
+------------+-------------+--------+--------+--------+--------+--------+------+------+------+------+-------+------+------+
|Module Name | DSP Mapping | A Size | B Size | C Size | D Size | P Size | AREG | BREG | CREG | DREG | ADREG | MREG | PREG |
+------------+-------------+--------+--------+--------+--------+--------+------+------+------+------+-------+------+------+
|A2P_WB | (A*B)' | 17 | 17 | - | - | 34 | 0 | 0 | - | - | - | 1 | 1 |
|A2P_WB | (A*B)' | 17 | 17 | - | - | 34 | 0 | 0 | - | - | - | 1 | 0 |
|A2P_WB | (A*B)' | 17 | 17 | - | - | 34 | 0 | 0 | - | - | - | 1 | 0 |
|A2P_WB | (A*B)' | 16 | 16 | - | - | 32 | 0 | 0 | - | - | - | 1 | 0 |
+------------+-------------+--------+--------+--------+--------+--------+------+------+------+------+-------+------+------+
Note: The table above is a preliminary report that shows the DSPs inferred at the current stage of the synthesis flow. Some DSP may be reimplemented as non DSP primitives later in the synthesis flow. Multiple instantiated DSPs are reported only once.
---------------------------------------------------------------------------------
Finished ROM, RAM, DSP, Shift Register and Retiming Reporting
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Start Applying XDC Timing Constraints
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Finished Applying XDC Timing Constraints : Time (s): cpu = 00:01:31 ; elapsed = 00:01:33 . Memory (MB): peak = 2434.484 ; gain = 135.699 ; free physical = 832 ; free virtual = 10778
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Start Timing Optimization
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Finished Timing Optimization : Time (s): cpu = 00:01:32 ; elapsed = 00:01:34 . Memory (MB): peak = 2434.484 ; gain = 135.699 ; free physical = 827 ; free virtual = 10774
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Start ROM, RAM, DSP, Shift Register and Retiming Reporting
---------------------------------------------------------------------------------
Block RAM: Final Mapping Report
+------------------------------+----------------------------------------+------------------------+---+---+------------------------+---+---+------------------+--------+--------+
|Module Name | RTL Object | PORT A (Depth x Width) | W | R | PORT B (Depth x Width) | W | R | Ports driving FF | RAMB18 | RAMB36 |
+------------------------------+----------------------------------------+------------------------+---+---+------------------------+---+---+------------------+--------+--------+
|A2P_WB/IBusCachedPlugin_cache | ways_0_datas_reg | 1 K x 32(READ_FIRST) | W | | 1 K x 32(WRITE_FIRST) | | R | Port A and B | 0 | 1 |
|A2P_WB/IBusCachedPlugin_cache | ways_0_tags_reg | 128 x 22(READ_FIRST) | W | | 128 x 22(WRITE_FIRST) | | R | Port A and B | 1 | 0 |
|A2P_WB/dataCache_1_ | DC_DIR_tags_reg | 128 x 22(READ_FIRST) | W | | 128 x 22(WRITE_FIRST) | | R | Port A and B | 1 | 0 |
|A2P_WB/dataCache_1_ | DC_DIR_data_symbol0_reg | 1 K x 8(READ_FIRST) | W | | 1 K x 8(WRITE_FIRST) | | R | Port A and B | 1 | 0 |
|A2P_WB/dataCache_1_ | DC_DIR_data_symbol1_reg | 1 K x 8(READ_FIRST) | W | | 1 K x 8(WRITE_FIRST) | | R | Port A and B | 1 | 0 |
|A2P_WB/dataCache_1_ | DC_DIR_data_symbol2_reg | 1 K x 8(READ_FIRST) | W | | 1 K x 8(WRITE_FIRST) | | R | Port A and B | 1 | 0 |
|A2P_WB/dataCache_1_ | DC_DIR_data_symbol3_reg | 1 K x 8(READ_FIRST) | W | | 1 K x 8(WRITE_FIRST) | | R | Port A and B | 1 | 0 |
|A2P_WB | IBusCachedPlugin_predictor_history_reg | 1 K x 54(READ_FIRST) | W | | 1 K x 54(WRITE_FIRST) | | R | Port A and B | 1 | 1 |
+------------------------------+----------------------------------------+------------------------+---+---+------------------------+---+---+------------------+--------+--------+
Distributed RAM: Final Mapping Report
+------------+---------------+-----------+----------------------+-------------+
|Module Name | RTL Object | Inference | Size (Depth x Width) | Primitives |
+------------+---------------+-----------+----------------------+-------------+
|cmod7 | storage_reg | Implied | 16 x 8 | RAM32M x 2 |
|cmod7 | storage_1_reg | Implied | 16 x 8 | RAM32M x 2 |
+------------+---------------+-----------+----------------------+-------------+
---------------------------------------------------------------------------------
Finished ROM, RAM, DSP, Shift Register and Retiming Reporting
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Start Technology Mapping
---------------------------------------------------------------------------------
INFO: [Synth 8-7052] The timing for the instance A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg (implemented as a Block RAM) might be sub-optimal as no optional output register could be merged into the ram block. Providing additional output register may help in improving timing.
INFO: [Synth 8-7052] The timing for the instance A2P_WB/dataCache_1_/DC_DIR_tags_reg (implemented as a Block RAM) might be sub-optimal as no optional output register could be merged into the ram block. Providing additional output register may help in improving timing.
INFO: [Synth 8-7052] The timing for the instance A2P_WB/RegFilePlugin_regFile_reg_1 (implemented as a Block RAM) might be sub-optimal as no optional output register could be merged into the ram block. Providing additional output register may help in improving timing.
INFO: [Synth 8-7052] The timing for the instance A2P_WB/RegFilePlugin_regFile_reg_2 (implemented as a Block RAM) might be sub-optimal as no optional output register could be merged into the ram block. Providing additional output register may help in improving timing.
INFO: [Synth 8-7052] The timing for the instance A2P_WB/RegFilePlugin_regFile_reg_3 (implemented as a Block RAM) might be sub-optimal as no optional output register could be merged into the ram block. Providing additional output register may help in improving timing.
INFO: [Synth 8-7052] The timing for the instance mem_1_dat0_reg_0 (implemented as a Block RAM) might be sub-optimal as no optional output register could be merged into the ram block. Providing additional output register may help in improving timing.
INFO: [Synth 8-7052] The timing for the instance mem_1_dat0_reg_1 (implemented as a Block RAM) might be sub-optimal as no optional output register could be merged into the ram block. Providing additional output register may help in improving timing.
INFO: [Synth 8-7052] The timing for the instance mem_1_dat0_reg_2 (implemented as a Block RAM) might be sub-optimal as no optional output register could be merged into the ram block. Providing additional output register may help in improving timing.
INFO: [Synth 8-7052] The timing for the instance mem_1_dat0_reg_3 (implemented as a Block RAM) might be sub-optimal as no optional output register could be merged into the ram block. Providing additional output register may help in improving timing.
INFO: [Synth 8-7052] The timing for the instance mem_1_dat0_reg_4 (implemented as a Block RAM) might be sub-optimal as no optional output register could be merged into the ram block. Providing additional output register may help in improving timing.
INFO: [Synth 8-7052] The timing for the instance mem_1_dat0_reg_5 (implemented as a Block RAM) might be sub-optimal as no optional output register could be merged into the ram block. Providing additional output register may help in improving timing.
INFO: [Synth 8-7052] The timing for the instance mem_1_dat0_reg_6 (implemented as a Block RAM) might be sub-optimal as no optional output register could be merged into the ram block. Providing additional output register may help in improving timing.
INFO: [Synth 8-7052] The timing for the instance mem_1_dat0_reg_7 (implemented as a Block RAM) might be sub-optimal as no optional output register could be merged into the ram block. Providing additional output register may help in improving timing.
INFO: [Synth 8-7052] The timing for the instance mem_1_dat0_reg_8 (implemented as a Block RAM) might be sub-optimal as no optional output register could be merged into the ram block. Providing additional output register may help in improving timing.
INFO: [Synth 8-7052] The timing for the instance mem_1_dat0_reg_9 (implemented as a Block RAM) might be sub-optimal as no optional output register could be merged into the ram block. Providing additional output register may help in improving timing.
INFO: [Synth 8-7052] The timing for the instance mem_1_dat0_reg_10 (implemented as a Block RAM) might be sub-optimal as no optional output register could be merged into the ram block. Providing additional output register may help in improving timing.
INFO: [Synth 8-7052] The timing for the instance mem_1_dat0_reg_11 (implemented as a Block RAM) might be sub-optimal as no optional output register could be merged into the ram block. Providing additional output register may help in improving timing.
INFO: [Synth 8-7052] The timing for the instance mem_1_dat0_reg_12 (implemented as a Block RAM) might be sub-optimal as no optional output register could be merged into the ram block. Providing additional output register may help in improving timing.
INFO: [Synth 8-7052] The timing for the instance mem_1_dat0_reg_13 (implemented as a Block RAM) might be sub-optimal as no optional output register could be merged into the ram block. Providing additional output register may help in improving timing.
INFO: [Synth 8-7052] The timing for the instance mem_1_dat0_reg_14 (implemented as a Block RAM) might be sub-optimal as no optional output register could be merged into the ram block. Providing additional output register may help in improving timing.
INFO: [Synth 8-7052] The timing for the instance mem_1_dat0_reg_15 (implemented as a Block RAM) might be sub-optimal as no optional output register could be merged into the ram block. Providing additional output register may help in improving timing.
---------------------------------------------------------------------------------
Finished Technology Mapping : Time (s): cpu = 00:01:35 ; elapsed = 00:01:38 . Memory (MB): peak = 2491.492 ; gain = 192.707 ; free physical = 811 ; free virtual = 10757
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Start IO Insertion
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Start Flattening Before IO Insertion
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Finished Flattening Before IO Insertion
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Start Final Netlist Cleanup
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Finished Final Netlist Cleanup
---------------------------------------------------------------------------------
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/a2p/verilog/A2P_WB.v:13035]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/a2p/verilog/A2P_WB.v:8058]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/a2p/verilog/A2P_WB.v:8058]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/a2p/verilog/A2P_WB.v:8058]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/a2p/verilog/A2P_WB.v:8058]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/a2p/verilog/A2P_WB.v:8058]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/a2p/verilog/A2P_WB.v:8058]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/a2p/verilog/A2P_WB.v:8058]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/a2p/verilog/A2P_WB.v:8058]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/a2p/verilog/A2P_WB.v:8733]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/a2p/verilog/A2P_WB.v:4098]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/a2p/verilog/A2P_WB.v:4098]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/a2p/verilog/A2P_WB.v:4098]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/a2p/verilog/A2P_WB.v:4098]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/a2p/verilog/A2P_WB.v:4098]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/a2p/verilog/A2P_WB.v:4098]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/a2p/verilog/A2P_WB.v:4098]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/a2p/verilog/A2P_WB.v:4098]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/a2p/verilog/A2P_WB.v:4098]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/a2p/verilog/A2P_WB.v:4098]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/a2p/verilog/A2P_WB.v:4098]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/a2p/verilog/A2P_WB.v:4098]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/a2p/verilog/A2P_WB.v:4098]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/a2p/verilog/A2P_WB.v:4098]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/a2p/verilog/A2P_WB.v:4098]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/a2p/verilog/A2P_WB.v:4098]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/a2p/verilog/A2P_WB.v:4098]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/a2p/verilog/A2P_WB.v:4098]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/a2p/verilog/A2P_WB.v:4098]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/a2p/verilog/A2P_WB.v:4098]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/a2p/verilog/A2P_WB.v:4098]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/a2p/verilog/A2P_WB.v:4098]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/a2p/verilog/A2P_WB.v:4098]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/a2p/verilog/A2P_WB.v:4098]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/a2p/verilog/A2P_WB.v:4098]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/a2p/verilog/A2P_WB.v:4098]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/a2p/verilog/A2P_WB.v:4098]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/a2p/verilog/A2P_WB.v:4098]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/a2p/verilog/A2P_WB.v:4098]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/a2p/verilog/A2P_WB.v:4098]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1814]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1814]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1814]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1814]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1814]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1814]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1814]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1814]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1988]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1988]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1988]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1988]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1988]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1988]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1988]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1988]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1988]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1988]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1988]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1988]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1988]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1988]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1988]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1988]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1988]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1988]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1988]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1988]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1988]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1988]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1988]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1988]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1988]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1988]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1988]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1988]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1988]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1988]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1988]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1988]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1973]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1973]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1973]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1973]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1973]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1973]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1979]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1979]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1979]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1979]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1979]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1979]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1979]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1979]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1976]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1976]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1976]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1976]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1976]
WARNING: [Synth 8-5396] Clock pin C has keep related attribute (keep/mark_debug/dont_touch) which could create extra logic on its net [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.v:1976]
INFO: [Common 17-14] Message 'Synth 8-5396' appears 100 times and further instances of the messages will be disabled. Use the Tcl command set_msg_config to change the current settings.
---------------------------------------------------------------------------------
Finished IO Insertion : Time (s): cpu = 00:01:38 ; elapsed = 00:01:41 . Memory (MB): peak = 2491.492 ; gain = 192.707 ; free physical = 807 ; free virtual = 10753
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Start Renaming Generated Instances
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Finished Renaming Generated Instances : Time (s): cpu = 00:01:38 ; elapsed = 00:01:41 . Memory (MB): peak = 2491.492 ; gain = 192.707 ; free physical = 807 ; free virtual = 10753
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Start Rebuilding User Hierarchy
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Finished Rebuilding User Hierarchy : Time (s): cpu = 00:01:39 ; elapsed = 00:01:41 . Memory (MB): peak = 2491.492 ; gain = 192.707 ; free physical = 807 ; free virtual = 10753
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Start Renaming Generated Ports
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Finished Renaming Generated Ports : Time (s): cpu = 00:01:39 ; elapsed = 00:01:41 . Memory (MB): peak = 2491.492 ; gain = 192.707 ; free physical = 807 ; free virtual = 10753
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Start Handling Custom Attributes
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Finished Handling Custom Attributes : Time (s): cpu = 00:01:39 ; elapsed = 00:01:41 . Memory (MB): peak = 2491.492 ; gain = 192.707 ; free physical = 807 ; free virtual = 10753
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Start Renaming Generated Nets
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Finished Renaming Generated Nets : Time (s): cpu = 00:01:39 ; elapsed = 00:01:41 . Memory (MB): peak = 2491.492 ; gain = 192.707 ; free physical = 807 ; free virtual = 10753
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Start Writing Synthesis Report
---------------------------------------------------------------------------------
Report BlackBoxes:
+-+--------------+----------+
| |BlackBox name |Instances |
+-+--------------+----------+
+-+--------------+----------+
Report Cell Usage:
+------+-----------+------+
| |Cell |Count |
+------+-----------+------+
|1 |BUFG | 4|
|2 |CARRY4 | 247|
|3 |DNA_PORT | 1|
|4 |DSP48E1 | 4|
|6 |IDELAYCTRL | 1|
|7 |LUT1 | 277|
|8 |LUT2 | 380|
|9 |LUT3 | 891|
|10 |LUT4 | 802|
|11 |LUT5 | 935|
|12 |LUT6 | 2417|
|13 |MMCME2_ADV | 1|
|14 |MUXF7 | 35|
|15 |RAM32M | 4|
|16 |RAMB18E1 | 10|
|19 |RAMB36E1 | 18|
|37 |XADC | 1|
|38 |FD | 8|
|39 |FDCE | 283|
|40 |FDPE | 7|
|41 |FDRE | 2451|
|42 |FDSE | 123|
|43 |IBUF | 5|
|44 |IOBUF | 9|
|45 |OBUF | 27|
|46 |OBUFT | 1|
+------+-----------+------+
---------------------------------------------------------------------------------
Finished Writing Synthesis Report : Time (s): cpu = 00:01:39 ; elapsed = 00:01:41 . Memory (MB): peak = 2491.492 ; gain = 192.707 ; free physical = 807 ; free virtual = 10753
---------------------------------------------------------------------------------
Synthesis finished with 0 errors, 0 critical warnings and 2907 warnings.
Synthesis Optimization Runtime : Time (s): cpu = 00:01:35 ; elapsed = 00:01:37 . Memory (MB): peak = 2491.492 ; gain = 79.992 ; free physical = 868 ; free virtual = 10814
Synthesis Optimization Complete : Time (s): cpu = 00:01:39 ; elapsed = 00:01:41 . Memory (MB): peak = 2491.500 ; gain = 192.707 ; free physical = 868 ; free virtual = 10814
INFO: [Project 1-571] Translating synthesized netlist
Netlist sorting complete. Time (s): cpu = 00:00:00.09 ; elapsed = 00:00:00.09 . Memory (MB): peak = 2491.500 ; gain = 0.000 ; free physical = 950 ; free virtual = 10897
INFO: [Netlist 29-17] Analyzing 337 Unisim elements for replacement
INFO: [Netlist 29-28] Unisim Transformation completed in 0 CPU seconds
INFO: [Project 1-570] Preparing netlist for logic optimization
Parsing XDC File [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.xdc]
INFO: [Timing 38-35] Done setting XDC timing constraints. [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.xdc:213]
INFO: [Timing 38-2] Deriving generated clocks [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.xdc:213]
WARNING: [Vivado 12-3521] Clock specified in more than one group: crg_clkout0 [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.xdc:213]
Finished Parsing XDC File [/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7.xdc]
INFO: [Opt 31-138] Pushed 0 inverter(s) to 0 load pin(s).
Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 2840.516 ; gain = 0.000 ; free physical = 611 ; free virtual = 10558
INFO: [Project 1-111] Unisim Transformation Summary:
A total of 21 instances were transformed.
FD => FDRE: 8 instances
IOBUF => IOBUF (IBUF, OBUFT): 9 instances
RAM32M => RAM32M (RAMD32(x6), RAMS32(x2)): 4 instances
INFO: [Common 17-83] Releasing license: Synthesis
81 Infos, 140 Warnings, 6 Critical Warnings and 0 Errors encountered.
synth_design completed successfully
synth_design: Time (s): cpu = 00:01:54 ; elapsed = 00:01:52 . Memory (MB): peak = 2840.516 ; gain = 541.828 ; free physical = 782 ; free virtual = 10728
# report_timing_summary -file cmod7_timing_synth.rpt
INFO: [Timing 38-35] Done setting XDC timing constraints.
INFO: [Timing 38-91] UpdateTimingParams: Speed grade: -1, Delay Type: min_max.
INFO: [Timing 38-191] Multithreading enabled for timing update using a maximum of 8 CPUs
# report_utilization -hierarchical -file cmod7_utilization_hierarchical_synth.rpt
# report_utilization -file cmod7_utilization_synth.rpt
# opt_design -directive default
Command: opt_design -directive default
INFO: [Vivado_Tcl 4-136] Directive used for opt_design is: default
Attempting to get a license for feature 'Implementation' and/or device 'xc7a35t'
INFO: [Common 17-349] Got license for feature 'Implementation' and/or device 'xc7a35t'
Running DRC as a precondition to command opt_design
Starting DRC Task
INFO: [DRC 23-27] Running DRC with 8 threads
WARNING: [DRC RPBF-3] IO port buffering is incomplete: Device port pmod0 expects both input and output buffering but the buffers are incomplete.
INFO: [Project 1-461] DRC finished with 0 Errors, 1 Warnings
INFO: [Project 1-462] Please refer to the DRC report (report_drc) for more information.
Time (s): cpu = 00:00:02 ; elapsed = 00:00:01 . Memory (MB): peak = 2911.574 ; gain = 64.031 ; free physical = 741 ; free virtual = 10688
Starting Cache Timing Information Task
Ending Cache Timing Information Task | Checksum: 12978f5b4
Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.01 . Memory (MB): peak = 2911.574 ; gain = 0.000 ; free physical = 741 ; free virtual = 10688
Starting Logic Optimization Task
Phase 1 Retarget
INFO: [Opt 31-138] Pushed 0 inverter(s) to 0 load pin(s).
INFO: [Opt 31-49] Retargeted 0 cell(s).
Phase 1 Retarget | Checksum: 1d94b6faf
Time (s): cpu = 00:00:00.90 ; elapsed = 00:00:00.46 . Memory (MB): peak = 2911.574 ; gain = 0.000 ; free physical = 638 ; free virtual = 10585
INFO: [Opt 31-389] Phase Retarget created 0 cells and removed 27 cells
INFO: [Opt 31-1021] In phase Retarget, 6 netlist objects are constrained preventing optimization. Please run opt_design with -debug_log to get more detail.
Phase 2 Constant propagation
INFO: [Opt 31-138] Pushed 0 inverter(s) to 0 load pin(s).
Phase 2 Constant propagation | Checksum: 1f4c0c0d9
Time (s): cpu = 00:00:01 ; elapsed = 00:00:00.58 . Memory (MB): peak = 2911.574 ; gain = 0.000 ; free physical = 638 ; free virtual = 10585
INFO: [Opt 31-389] Phase Constant propagation created 0 cells and removed 1 cells
INFO: [Opt 31-1021] In phase Constant propagation, 2 netlist objects are constrained preventing optimization. Please run opt_design with -debug_log to get more detail.
Phase 3 Sweep
Phase 3 Sweep | Checksum: 1b055dea7
Time (s): cpu = 00:00:01 ; elapsed = 00:00:00.73 . Memory (MB): peak = 2911.574 ; gain = 0.000 ; free physical = 638 ; free virtual = 10585
INFO: [Opt 31-389] Phase Sweep created 0 cells and removed 19 cells
INFO: [Opt 31-1021] In phase Sweep, 20 netlist objects are constrained preventing optimization. Please run opt_design with -debug_log to get more detail.
Phase 4 BUFG optimization
Phase 4 BUFG optimization | Checksum: 1b055dea7
Time (s): cpu = 00:00:01 ; elapsed = 00:00:00.85 . Memory (MB): peak = 2911.574 ; gain = 0.000 ; free physical = 638 ; free virtual = 10585
INFO: [Opt 31-662] Phase BUFG optimization created 0 cells of which 0 are BUFGs and removed 0 cells.
INFO: [Opt 31-1021] In phase BUFG optimization, 3 netlist objects are constrained preventing optimization. Please run opt_design with -debug_log to get more detail.
Phase 5 Shift Register Optimization
INFO: [Opt 31-1064] SRL Remap converted 0 SRLs to 0 registers and converted 0 registers of register chains to 0 SRLs
Phase 5 Shift Register Optimization | Checksum: 1b055dea7
Time (s): cpu = 00:00:01 ; elapsed = 00:00:00.87 . Memory (MB): peak = 2911.574 ; gain = 0.000 ; free physical = 638 ; free virtual = 10585
INFO: [Opt 31-389] Phase Shift Register Optimization created 0 cells and removed 0 cells
Phase 6 Post Processing Netlist
Phase 6 Post Processing Netlist | Checksum: 1b055dea7
Time (s): cpu = 00:00:01 ; elapsed = 00:00:00.91 . Memory (MB): peak = 2911.574 ; gain = 0.000 ; free physical = 638 ; free virtual = 10585
INFO: [Opt 31-389] Phase Post Processing Netlist created 0 cells and removed 0 cells
INFO: [Opt 31-1021] In phase Post Processing Netlist, 1 netlist objects are constrained preventing optimization. Please run opt_design with -debug_log to get more detail.
Opt_design Change Summary
=========================
-------------------------------------------------------------------------------------------------------------------------
| Phase | #Cells created | #Cells Removed | #Constrained objects preventing optimizations |
-------------------------------------------------------------------------------------------------------------------------
| Retarget | 0 | 27 | 6 |
| Constant propagation | 0 | 1 | 2 |
| Sweep | 0 | 19 | 20 |
| BUFG optimization | 0 | 0 | 3 |
| Shift Register Optimization | 0 | 0 | 0 |
| Post Processing Netlist | 0 | 0 | 1 |
-------------------------------------------------------------------------------------------------------------------------
Starting Connectivity Check Task
Time (s): cpu = 00:00:00.02 ; elapsed = 00:00:00.02 . Memory (MB): peak = 2911.574 ; gain = 0.000 ; free physical = 638 ; free virtual = 10585
Ending Logic Optimization Task | Checksum: 1a34ea084
Time (s): cpu = 00:00:02 ; elapsed = 00:00:01 . Memory (MB): peak = 2911.574 ; gain = 0.000 ; free physical = 638 ; free virtual = 10585
Starting Power Optimization Task
INFO: [Pwropt 34-132] Skipping clock gating for clocks with a period < 2.00 ns.
INFO: [Power 33-23] Power model is not available for DNA_PORT
INFO: [Timing 38-35] Done setting XDC timing constraints.
Running Vector-less Activity Propagation...
INFO: [Pwropt 34-9] Applying IDT optimizations ...
INFO: [Pwropt 34-10] Applying ODC optimizations ...
Finished Running Vector-less Activity Propagation
Starting PowerOpt Patch Enables Task
INFO: [Pwropt 34-162] WRITE_MODE attribute of 0 BRAM(s) out of a total of 28 has been updated to save power. Run report_power_opt to get a complete listing of the BRAMs updated.
INFO: [Pwropt 34-201] Structural ODC has moved 0 WE to EN ports
Number of BRAM Ports augmented: 1 newly gated: 1 Total Ports: 56
Ending PowerOpt Patch Enables Task | Checksum: 1825a2c4a
Time (s): cpu = 00:00:00.11 ; elapsed = 00:00:00.12 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 774 ; free virtual = 10721
Ending Power Optimization Task | Checksum: 1825a2c4a
Time (s): cpu = 00:00:07 ; elapsed = 00:00:05 . Memory (MB): peak = 3170.543 ; gain = 258.969 ; free physical = 779 ; free virtual = 10726
Starting Final Cleanup Task
Ending Final Cleanup Task | Checksum: 1825a2c4a
Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 779 ; free virtual = 10726
Starting Netlist Obfuscation Task
Netlist sorting complete. Time (s): cpu = 00:00:00.01 ; elapsed = 00:00:00.01 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 779 ; free virtual = 10726
Ending Netlist Obfuscation Task | Checksum: ef4b2e89
Time (s): cpu = 00:00:00.01 ; elapsed = 00:00:00.01 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 779 ; free virtual = 10726
INFO: [Common 17-83] Releasing license: Implementation
28 Infos, 1 Warnings, 0 Critical Warnings and 0 Errors encountered.
opt_design completed successfully
opt_design: Time (s): cpu = 00:00:13 ; elapsed = 00:00:09 . Memory (MB): peak = 3170.543 ; gain = 323.000 ; free physical = 779 ; free virtual = 10726
# place_design -directive default
Command: place_design -directive default
Attempting to get a license for feature 'Implementation' and/or device 'xc7a35t'
INFO: [Common 17-349] Got license for feature 'Implementation' and/or device 'xc7a35t'
INFO: [Timing 38-35] Done setting XDC timing constraints.
INFO: [DRC 23-27] Running DRC with 8 threads
INFO: [Vivado_Tcl 4-198] DRC finished with 0 Errors
INFO: [Vivado_Tcl 4-199] Please refer to the DRC report (report_drc) for more information.
Running DRC as a precondition to command place_design
INFO: [DRC 23-27] Running DRC with 8 threads
WARNING: [DRC CHECK-3] Report rule limit reached: REQP-1839 rule limit reached: 20 violations have been found.
WARNING: [DRC CHECK-3] Report rule limit reached: REQP-1840 rule limit reached: 20 violations have been found.
WARNING: [DRC REQP-1839] RAMB36 async control check: The RAMB36E1 A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg/ADDRARDADDR[5] (net: A2P_WB/IBusCachedPlugin_cache/lineLoader_wordIndex[0]) which is driven by a register (A2P_WB/IBusCachedPlugin_cache/lineLoader_wordIndex_reg[0]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1839] RAMB36 async control check: The RAMB36E1 A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg/ADDRARDADDR[6] (net: A2P_WB/IBusCachedPlugin_cache/lineLoader_wordIndex[1]) which is driven by a register (A2P_WB/IBusCachedPlugin_cache/lineLoader_wordIndex_reg[1]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1839] RAMB36 async control check: The RAMB36E1 A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg/ADDRARDADDR[7] (net: A2P_WB/IBusCachedPlugin_cache/lineLoader_wordIndex[2]) which is driven by a register (A2P_WB/IBusCachedPlugin_cache/lineLoader_wordIndex_reg[2]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1839] RAMB36 async control check: The RAMB36E1 A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg/ADDRBWRADDR[14] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/IBusCachedPlugin_fetchPc_inc_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1839] RAMB36 async control check: The RAMB36E1 A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg/ADDRBWRADDR[14] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/IBusCachedPlugin_fetchPc_pcReg_reg[11]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1839] RAMB36 async control check: The RAMB36E1 A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg/ADDRBWRADDR[14] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/IBusCachedPlugin_fetchPc_pcReg_reg[3]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1839] RAMB36 async control check: The RAMB36E1 A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg/ADDRBWRADDR[14] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/IBusCachedPlugin_fetchPc_pcReg_reg[7]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1839] RAMB36 async control check: The RAMB36E1 A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg/ADDRBWRADDR[14] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/IBusCachedPlugin_fetchPc_pcReg_reg[9]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1839] RAMB36 async control check: The RAMB36E1 A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg/ADDRBWRADDR[14] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/SPRPlugin_exceptionPortCtrl_exceptionValidsRegs_execute_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1839] RAMB36 async control check: The RAMB36E1 A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg/ADDRBWRADDR[14] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/SPRPlugin_exceptionPortCtrl_exceptionValidsRegs_memory_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1839] RAMB36 async control check: The RAMB36E1 A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg/ADDRBWRADDR[14] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/SPRPlugin_hadException_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1839] RAMB36 async control check: The RAMB36E1 A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg/ADDRBWRADDR[14] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/SPRPlugin_interrupt_valid_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1839] RAMB36 async control check: The RAMB36E1 A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg/ADDRBWRADDR[14] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/SPRPlugin_pipelineLiberator_pcValids_2_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1839] RAMB36 async control check: The RAMB36E1 A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg/ADDRBWRADDR[14] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/_zz_140__reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1839] RAMB36 async control check: The RAMB36E1 A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg/ADDRBWRADDR[14] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/_zz_143__reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1839] RAMB36 async control check: The RAMB36E1 A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg/ADDRBWRADDR[14] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/_zz_359__reg[1]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1839] RAMB36 async control check: The RAMB36E1 A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg/ADDRBWRADDR[14] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/_zz_365__reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1839] RAMB36 async control check: The RAMB36E1 A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg/ADDRBWRADDR[14] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/dataCache_1__io_mem_cmd_m2sPipe_rValid_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1839] RAMB36 async control check: The RAMB36E1 A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg/ADDRBWRADDR[14] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/memory_arbitration_isValid_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1839] RAMB36 async control check: The RAMB36E1 A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg/ADDRBWRADDR[14] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/writeBack_arbitration_isValid_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1840] RAMB18 async control check: The RAMB18E1 A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg/ADDRARDADDR[11] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/IBusCachedPlugin_fetchPc_inc_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1840] RAMB18 async control check: The RAMB18E1 A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg/ADDRARDADDR[11] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/IBusCachedPlugin_fetchPc_pcReg_reg[11]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1840] RAMB18 async control check: The RAMB18E1 A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg/ADDRARDADDR[11] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/IBusCachedPlugin_fetchPc_pcReg_reg[1]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1840] RAMB18 async control check: The RAMB18E1 A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg/ADDRARDADDR[11] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/IBusCachedPlugin_fetchPc_pcReg_reg[3]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1840] RAMB18 async control check: The RAMB18E1 A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg/ADDRARDADDR[11] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/IBusCachedPlugin_fetchPc_pcReg_reg[7]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1840] RAMB18 async control check: The RAMB18E1 A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg/ADDRARDADDR[11] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/IBusCachedPlugin_fetchPc_pcReg_reg[9]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1840] RAMB18 async control check: The RAMB18E1 A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg/ADDRARDADDR[11] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/SPRPlugin_exceptionPortCtrl_exceptionValidsRegs_execute_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1840] RAMB18 async control check: The RAMB18E1 A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg/ADDRARDADDR[11] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/SPRPlugin_exceptionPortCtrl_exceptionValidsRegs_memory_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1840] RAMB18 async control check: The RAMB18E1 A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg/ADDRARDADDR[11] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/SPRPlugin_exceptionPortCtrl_exceptionValidsRegs_writeBack_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1840] RAMB18 async control check: The RAMB18E1 A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg/ADDRARDADDR[11] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/SPRPlugin_hadException_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1840] RAMB18 async control check: The RAMB18E1 A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg/ADDRARDADDR[11] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/SPRPlugin_interrupt_valid_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1840] RAMB18 async control check: The RAMB18E1 A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg/ADDRARDADDR[11] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/SPRPlugin_pipelineLiberator_pcValids_2_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1840] RAMB18 async control check: The RAMB18E1 A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg/ADDRARDADDR[11] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/_zz_140__reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1840] RAMB18 async control check: The RAMB18E1 A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg/ADDRARDADDR[11] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/_zz_143__reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1840] RAMB18 async control check: The RAMB18E1 A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg/ADDRARDADDR[11] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/_zz_359__reg[1]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1840] RAMB18 async control check: The RAMB18E1 A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg/ADDRARDADDR[11] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/_zz_365__reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1840] RAMB18 async control check: The RAMB18E1 A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg/ADDRARDADDR[11] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/dataCache_1__io_mem_cmd_m2sPipe_rValid_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1840] RAMB18 async control check: The RAMB18E1 A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg/ADDRARDADDR[11] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/memory_arbitration_isValid_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1840] RAMB18 async control check: The RAMB18E1 A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg/ADDRARDADDR[11] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/writeBack_arbitration_isValid_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1840] RAMB18 async control check: The RAMB18E1 A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg/ADDRARDADDR[11] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (FDPE_1) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC RPBF-3] IO port buffering is incomplete: Device port pmod0 expects both input and output buffering but the buffers are incomplete.
INFO: [Vivado_Tcl 4-198] DRC finished with 0 Errors, 43 Warnings
INFO: [Vivado_Tcl 4-199] Please refer to the DRC report (report_drc) for more information.
Starting Placer Task
INFO: [Place 46-5] The placer was invoked with the 'default' directive.
INFO: [Place 30-611] Multithreading enabled for place_design using a maximum of 8 CPUs
Phase 1 Placer Initialization
Phase 1.1 Placer Initialization Netlist Sorting
Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.01 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 750 ; free virtual = 10697
Phase 1.1 Placer Initialization Netlist Sorting | Checksum: b6b9e3cf
Time (s): cpu = 00:00:00.02 ; elapsed = 00:00:00.06 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 750 ; free virtual = 10697
Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 750 ; free virtual = 10697
Phase 1.2 IO Placement/ Clock Placement/ Build Placer Device
WARNING: [Place 30-568] A LUT 'clk12_inst' is driving clock pin of 8 registers. This could lead to large hold time violations. First few involved registers are:
FD_5 {FDRE}
FD_1 {FDRE}
FD {FDRE}
FD_3 {FDRE}
FD_2 {FDRE}
Phase 1.2 IO Placement/ Clock Placement/ Build Placer Device | Checksum: d094301e
Time (s): cpu = 00:00:01 ; elapsed = 00:00:00.68 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 768 ; free virtual = 10715
Phase 1.3 Build Placer Netlist Model
Phase 1.3 Build Placer Netlist Model | Checksum: 12e594cea
Time (s): cpu = 00:00:05 ; elapsed = 00:00:02 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 766 ; free virtual = 10712
Phase 1.4 Constrain Clocks/Macros
Phase 1.4 Constrain Clocks/Macros | Checksum: 12e594cea
Time (s): cpu = 00:00:05 ; elapsed = 00:00:02 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 766 ; free virtual = 10712
Phase 1 Placer Initialization | Checksum: 12e594cea
Time (s): cpu = 00:00:05 ; elapsed = 00:00:02 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 766 ; free virtual = 10712
Phase 2 Global Placement
Phase 2.1 Floorplanning
Phase 2.1 Floorplanning | Checksum: 102370582
Time (s): cpu = 00:00:06 ; elapsed = 00:00:03 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 758 ; free virtual = 10705
Phase 2.2 Update Timing before SLR Path Opt
Phase 2.2 Update Timing before SLR Path Opt | Checksum: 12aabc56c
Time (s): cpu = 00:00:07 ; elapsed = 00:00:03 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 759 ; free virtual = 10706
Phase 2.3 Global Placement Core
Phase 2.3.1 Physical Synthesis In Placer
INFO: [Physopt 32-1035] Found 107 LUTNM shape to break, 203 LUT instances to create LUTNM shape
INFO: [Physopt 32-1044] Break lutnm for timing: one critical 77, two critical 30, total 107, new lutff created 1
INFO: [Physopt 32-775] End 1 Pass. Optimized 182 nets or cells. Created 107 new cells, deleted 75 existing cells and moved 0 existing cell
INFO: [Physopt 32-65] No nets found for high-fanout optimization.
INFO: [Physopt 32-232] Optimized 0 net. Created 0 new instance.
INFO: [Physopt 32-775] End 1 Pass. Optimized 0 net or cell. Created 0 new cell, deleted 0 existing cell and moved 0 existing cell
INFO: [Physopt 32-64] No nets found for fanout-optimization.
INFO: [Physopt 32-232] Optimized 0 net. Created 0 new instance.
INFO: [Physopt 32-775] End 1 Pass. Optimized 0 net or cell. Created 0 new cell, deleted 0 existing cell and moved 0 existing cell
INFO: [Physopt 32-117] Net A2P_WB/dataCache_1_/decodeStage_mmuRsp_physicalAddress_reg[31][1] could not be optimized because driver A2P_WB/dataCache_1_/ways_0_datas_reg_i_11 could not be replicated
INFO: [Physopt 32-117] Net A2P_WB/dataCache_1_/decodeStage_mmuRsp_physicalAddress_reg[31][5] could not be optimized because driver A2P_WB/dataCache_1_/ways_0_datas_reg_i_7 could not be replicated
INFO: [Physopt 32-117] Net A2P_WB/dataCache_1_/decodeStage_mmuRsp_physicalAddress_reg[31][10] could not be optimized because driver A2P_WB/dataCache_1_/ways_0_datas_reg_i_2 could not be replicated
INFO: [Physopt 32-117] Net A2P_WB/dataCache_1_/decodeStage_mmuRsp_physicalAddress_reg[31][3] could not be optimized because driver A2P_WB/dataCache_1_/ways_0_datas_reg_i_9 could not be replicated
INFO: [Physopt 32-117] Net A2P_WB/dataCache_1_/decodeStage_mmuRsp_physicalAddress_reg[31][2] could not be optimized because driver A2P_WB/dataCache_1_/ways_0_datas_reg_i_10 could not be replicated
INFO: [Physopt 32-117] Net A2P_WB/dataCache_1_/decodeStage_mmuRsp_physicalAddress_reg[31][7] could not be optimized because driver A2P_WB/dataCache_1_/ways_0_datas_reg_i_5 could not be replicated
INFO: [Physopt 32-117] Net A2P_WB/dataCache_1_/decodeStage_mmuRsp_physicalAddress_reg[31][8] could not be optimized because driver A2P_WB/dataCache_1_/ways_0_datas_reg_i_4 could not be replicated
INFO: [Physopt 32-117] Net A2P_WB/dataCache_1_/decodeStage_mmuRsp_physicalAddress_reg[31][4] could not be optimized because driver A2P_WB/dataCache_1_/ways_0_datas_reg_i_8 could not be replicated
INFO: [Physopt 32-117] Net A2P_WB/dataCache_1_/decodeStage_mmuRsp_physicalAddress_reg[31][6] could not be optimized because driver A2P_WB/dataCache_1_/ways_0_datas_reg_i_6 could not be replicated
INFO: [Physopt 32-117] Net A2P_WB/dataCache_1_/decodeStage_mmuRsp_physicalAddress_reg[31][9] could not be optimized because driver A2P_WB/dataCache_1_/ways_0_datas_reg_i_3 could not be replicated
INFO: [Physopt 32-68] No nets found for critical-cell optimization.
INFO: [Physopt 32-232] Optimized 0 net. Created 0 new instance.
INFO: [Physopt 32-775] End 1 Pass. Optimized 0 net or cell. Created 0 new cell, deleted 0 existing cell and moved 0 existing cell
INFO: [Physopt 32-456] No candidate cells for DSP register optimization found in the design.
INFO: [Physopt 32-775] End 2 Pass. Optimized 0 net or cell. Created 0 new cell, deleted 0 existing cell and moved 0 existing cell
INFO: [Physopt 32-1123] No candidate cells found for Shift Register to Pipeline optimization
INFO: [Physopt 32-775] End 1 Pass. Optimized 0 net or cell. Created 0 new cell, deleted 0 existing cell and moved 0 existing cell
INFO: [Physopt 32-677] No candidate cells for Shift Register optimization found in the design
INFO: [Physopt 32-775] End 1 Pass. Optimized 0 net or cell. Created 0 new cell, deleted 0 existing cell and moved 0 existing cell
INFO: [Physopt 32-527] Pass 1: Identified 3 candidate cells for BRAM register optimization
INFO: [Physopt 32-665] Processed cell A2P_WB/dataCache_1_/DC_DIR_data_symbol3_reg. 8 registers were pushed out.
INFO: [Physopt 32-666] Processed cell A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg. No change.
INFO: [Physopt 32-665] Processed cell A2P_WB/dataCache_1_/DC_DIR_data_symbol2_reg. 8 registers were pushed out.
INFO: [Physopt 32-775] End 1 Pass. Optimized 2 nets or cells. Created 16 new cells, deleted 0 existing cell and moved 0 existing cell
Netlist sorting complete. Time (s): cpu = 00:00:00.02 ; elapsed = 00:00:00.02 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 739 ; free virtual = 10686
INFO: [Physopt 32-846] No candidate cells for URAM register optimization found in the design
INFO: [Physopt 32-775] End 2 Pass. Optimized 0 net or cell. Created 0 new cell, deleted 0 existing cell and moved 0 existing cell
INFO: [Physopt 32-949] No candidate nets found for dynamic/static region interface net replication
INFO: [Physopt 32-775] End 1 Pass. Optimized 0 net or cell. Created 0 new cell, deleted 0 existing cell and moved 0 existing cell
Netlist sorting complete. Time (s): cpu = 00:00:00.01 ; elapsed = 00:00:00 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 739 ; free virtual = 10686
Summary of Physical Synthesis Optimizations
============================================
-----------------------------------------------------------------------------------------------------------------------------------------------------------
| Optimization | Added Cells | Removed Cells | Optimized Cells/Nets | Dont Touch | Iterations | Elapsed |
-----------------------------------------------------------------------------------------------------------------------------------------------------------
| LUT Combining | 107 | 75 | 182 | 0 | 1 | 00:00:00 |
| Very High Fanout | 0 | 0 | 0 | 0 | 1 | 00:00:00 |
| Fanout | 0 | 0 | 0 | 0 | 1 | 00:00:00 |
| Critical Cell | 0 | 0 | 0 | 0 | 1 | 00:00:00 |
| DSP Register | 0 | 0 | 0 | 0 | 1 | 00:00:00 |
| Shift Register to Pipeline | 0 | 0 | 0 | 0 | 1 | 00:00:00 |
| Shift Register | 0 | 0 | 0 | 0 | 1 | 00:00:00 |
| BRAM Register | 16 | 0 | 2 | 0 | 1 | 00:00:00 |
| URAM Register | 0 | 0 | 0 | 0 | 1 | 00:00:00 |
| Dynamic/Static Region Interface Net Replication | 0 | 0 | 0 | 0 | 1 | 00:00:00 |
| Total | 123 | 75 | 184 | 0 | 10 | 00:00:01 |
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Phase 2.3.1 Physical Synthesis In Placer | Checksum: 19c653749
Time (s): cpu = 00:00:23 ; elapsed = 00:00:10 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 740 ; free virtual = 10687
Phase 2.3 Global Placement Core | Checksum: 18c9e46b7
Time (s): cpu = 00:00:24 ; elapsed = 00:00:10 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 740 ; free virtual = 10686
Phase 2 Global Placement | Checksum: 18c9e46b7
Time (s): cpu = 00:00:24 ; elapsed = 00:00:10 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 743 ; free virtual = 10690
Phase 3 Detail Placement
Phase 3.1 Commit Multi Column Macros
Phase 3.1 Commit Multi Column Macros | Checksum: 1c9f1baa9
Time (s): cpu = 00:00:25 ; elapsed = 00:00:11 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 743 ; free virtual = 10689
Phase 3.2 Commit Most Macros & LUTRAMs
Phase 3.2 Commit Most Macros & LUTRAMs | Checksum: 1f0337058
Time (s): cpu = 00:00:27 ; elapsed = 00:00:12 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 741 ; free virtual = 10688
Phase 3.3 Area Swap Optimization
Phase 3.3 Area Swap Optimization | Checksum: 208d7322e
Time (s): cpu = 00:00:28 ; elapsed = 00:00:12 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 741 ; free virtual = 10688
Phase 3.4 Pipeline Register Optimization
Phase 3.4 Pipeline Register Optimization | Checksum: 22bd3208c
Time (s): cpu = 00:00:28 ; elapsed = 00:00:12 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 741 ; free virtual = 10688
Phase 3.5 Fast Optimization
Phase 3.5 Fast Optimization | Checksum: 230abce19
Time (s): cpu = 00:00:31 ; elapsed = 00:00:13 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 740 ; free virtual = 10687
Phase 3.6 Small Shape Detail Placement
Phase 3.6 Small Shape Detail Placement | Checksum: 21cddc7bf
Time (s): cpu = 00:00:34 ; elapsed = 00:00:16 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 740 ; free virtual = 10687
Phase 3.7 Re-assign LUT pins
Phase 3.7 Re-assign LUT pins | Checksum: 1cd7ad4ed
Time (s): cpu = 00:00:34 ; elapsed = 00:00:16 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 742 ; free virtual = 10689
Phase 3.8 Pipeline Register Optimization
Phase 3.8 Pipeline Register Optimization | Checksum: 153579b5e
Time (s): cpu = 00:00:35 ; elapsed = 00:00:16 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 742 ; free virtual = 10689
Phase 3.9 Fast Optimization
Phase 3.9 Fast Optimization | Checksum: 1d338a4b9
Time (s): cpu = 00:00:42 ; elapsed = 00:00:21 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 735 ; free virtual = 10682
Phase 3 Detail Placement | Checksum: 1d338a4b9
Time (s): cpu = 00:00:42 ; elapsed = 00:00:21 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 735 ; free virtual = 10682
Phase 4 Post Placement Optimization and Clean-Up
Phase 4.1 Post Commit Optimization
INFO: [Timing 38-35] Done setting XDC timing constraints.
Phase 4.1.1 Post Placement Optimization
Post Placement Optimization Initialization | Checksum: 213358b0e
Phase 4.1.1.1 BUFG Insertion
Starting Physical Synthesis Task
Phase 1 Physical Synthesis Initialization
INFO: [Physopt 32-721] Multithreading enabled for phys_opt_design using a maximum of 8 CPUs
INFO: [Physopt 32-619] Estimated Timing Summary | WNS=-0.306 | TNS=-1.849 |
Phase 1 Physical Synthesis Initialization | Checksum: 1aef7145f
Time (s): cpu = 00:00:00.84 ; elapsed = 00:00:00.19 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 731 ; free virtual = 10677
INFO: [Place 46-56] BUFG insertion identified 0 candidate nets. Inserted BUFG: 0, Replicated BUFG Driver: 0, Skipped due to Placement/Routing Conflicts: 0, Skipped due to Timing Degradation: 0, Skipped due to Illegal Netlist: 0.
Ending Physical Synthesis Task | Checksum: 195647e5d
Time (s): cpu = 00:00:00.87 ; elapsed = 00:00:00.22 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 731 ; free virtual = 10677
Phase 4.1.1.1 BUFG Insertion | Checksum: 213358b0e
Time (s): cpu = 00:00:47 ; elapsed = 00:00:22 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 731 ; free virtual = 10677
INFO: [Place 30-746] Post Placement Timing Summary WNS=0.510. For the most accurate timing information please run report_timing.
Time (s): cpu = 00:00:50 ; elapsed = 00:00:24 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 730 ; free virtual = 10676
Phase 4.1 Post Commit Optimization | Checksum: 199935b85
Time (s): cpu = 00:00:50 ; elapsed = 00:00:24 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 730 ; free virtual = 10676
Phase 4.2 Post Placement Cleanup
Phase 4.2 Post Placement Cleanup | Checksum: 199935b85
Time (s): cpu = 00:00:50 ; elapsed = 00:00:24 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 730 ; free virtual = 10676
Phase 4.3 Placer Reporting
Phase 4.3.1 Print Estimated Congestion
INFO: [Place 30-612] Post-Placement Estimated Congestion
____________________________________________________
| | Global Congestion | Short Congestion |
| Direction | Region Size | Region Size |
|___________|___________________|___________________|
| North| 1x1| 8x8|
|___________|___________________|___________________|
| South| 1x1| 4x4|
|___________|___________________|___________________|
| East| 1x1| 4x4|
|___________|___________________|___________________|
| West| 1x1| 1x1|
|___________|___________________|___________________|
Phase 4.3.1 Print Estimated Congestion | Checksum: 199935b85
Time (s): cpu = 00:00:50 ; elapsed = 00:00:24 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 730 ; free virtual = 10676
Phase 4.3 Placer Reporting | Checksum: 199935b85
Time (s): cpu = 00:00:50 ; elapsed = 00:00:25 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 730 ; free virtual = 10676
Phase 4.4 Final Placement Cleanup
Netlist sorting complete. Time (s): cpu = 00:00:00 ; elapsed = 00:00:00.01 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 730 ; free virtual = 10676
Time (s): cpu = 00:00:50 ; elapsed = 00:00:25 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 730 ; free virtual = 10676
Phase 4 Post Placement Optimization and Clean-Up | Checksum: 10a32b2b4
Time (s): cpu = 00:00:50 ; elapsed = 00:00:25 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 730 ; free virtual = 10676
Ending Placer Task | Checksum: 61514434
Time (s): cpu = 00:00:50 ; elapsed = 00:00:25 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 730 ; free virtual = 10676
INFO: [Common 17-83] Releasing license: Implementation
54 Infos, 44 Warnings, 0 Critical Warnings and 0 Errors encountered.
place_design completed successfully
place_design: Time (s): cpu = 00:00:56 ; elapsed = 00:00:27 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 743 ; free virtual = 10689
# report_utilization -hierarchical -file cmod7_utilization_hierarchical_place.rpt
# report_utilization -file cmod7_utilization_place.rpt
# report_io -file cmod7_io.rpt
report_io: Time (s): cpu = 00:00:00.11 ; elapsed = 00:00:00.17 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 739 ; free virtual = 10685
# report_control_sets -verbose -file cmod7_control_sets.rpt
report_control_sets: Time (s): cpu = 00:00:00.07 ; elapsed = 00:00:00.14 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 748 ; free virtual = 10695
# report_clock_utilization -file cmod7_clock_utilization.rpt
# route_design -directive default
Command: route_design -directive default
Attempting to get a license for feature 'Implementation' and/or device 'xc7a35t'
INFO: [Common 17-349] Got license for feature 'Implementation' and/or device 'xc7a35t'
Running DRC as a precondition to command route_design
INFO: [DRC 23-27] Running DRC with 8 threads
INFO: [Vivado_Tcl 4-198] DRC finished with 0 Errors
INFO: [Vivado_Tcl 4-199] Please refer to the DRC report (report_drc) for more information.
Starting Routing Task
INFO: [Route 35-270] Using Router directive 'default'.
INFO: [Route 35-254] Multithreading enabled for route_design using a maximum of 8 CPUs
Checksum: PlaceDB: 17552f95 ConstDB: 0 ShapeSum: 49fc149f RouteDB: 0
Phase 1 Build RT Design
Phase 1 Build RT Design | Checksum: 157ed1690
Time (s): cpu = 00:00:14 ; elapsed = 00:00:10 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 630 ; free virtual = 10578
Post Restoration Checksum: NetGraph: ef4e428a NumContArr: 689ed406 Constraints: 0 Timing: 0
Phase 2 Router Initialization
Phase 2.1 Create Timer
Phase 2.1 Create Timer | Checksum: 157ed1690
Time (s): cpu = 00:00:14 ; elapsed = 00:00:10 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 633 ; free virtual = 10581
Phase 2.2 Fix Topology Constraints
Phase 2.2 Fix Topology Constraints | Checksum: 157ed1690
Time (s): cpu = 00:00:14 ; elapsed = 00:00:10 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 603 ; free virtual = 10550
Phase 2.3 Pre Route Cleanup
Phase 2.3 Pre Route Cleanup | Checksum: 157ed1690
Time (s): cpu = 00:00:14 ; elapsed = 00:00:10 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 603 ; free virtual = 10550
Number of Nodes with overlaps = 0
Phase 2.4 Update Timing
Phase 2.4 Update Timing | Checksum: 210981e82
Time (s): cpu = 00:00:19 ; elapsed = 00:00:12 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 590 ; free virtual = 10537
INFO: [Route 35-416] Intermediate Timing Summary | WNS=0.653 | TNS=0.000 | WHS=-0.148 | THS=-41.667|
Phase 2 Router Initialization | Checksum: 1cf3a94d4
Time (s): cpu = 00:00:21 ; elapsed = 00:00:13 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 588 ; free virtual = 10536
Router Utilization Summary
Global Vertical Routing Utilization = 0.00741449 %
Global Horizontal Routing Utilization = 0.00507548 %
Routable Net Status*
*Does not include unroutable nets such as driverless and loadless.
Run report_route_status for detailed report.
Number of Failed Nets = 7690
(Failed Nets is the sum of unrouted and partially routed nets)
Number of Unrouted Nets = 7689
Number of Partially Routed Nets = 1
Number of Node Overlaps = 0
Phase 3 Initial Routing
Phase 3.1 Global Routing
Phase 3.1 Global Routing | Checksum: 1cf3a94d4
Time (s): cpu = 00:00:21 ; elapsed = 00:00:13 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 586 ; free virtual = 10533
Phase 3 Initial Routing | Checksum: 245374c77
Time (s): cpu = 00:00:28 ; elapsed = 00:00:14 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 583 ; free virtual = 10531
Phase 4 Rip-up And Reroute
Phase 4.1 Global Iteration 0
Number of Nodes with overlaps = 3721
Number of Nodes with overlaps = 1755
Number of Nodes with overlaps = 985
Number of Nodes with overlaps = 613
Number of Nodes with overlaps = 317
Number of Nodes with overlaps = 119
Number of Nodes with overlaps = 127
Number of Nodes with overlaps = 50
Number of Nodes with overlaps = 21
Number of Nodes with overlaps = 7
Number of Nodes with overlaps = 0
INFO: [Route 35-416] Intermediate Timing Summary | WNS=-0.162 | TNS=-0.284 | WHS=N/A | THS=N/A |
Phase 4.1 Global Iteration 0 | Checksum: 10d4cf58e
Time (s): cpu = 00:02:12 ; elapsed = 00:00:44 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 585 ; free virtual = 10529
Phase 4.2 Global Iteration 1
Number of Nodes with overlaps = 592
Number of Nodes with overlaps = 318
Number of Nodes with overlaps = 146
Number of Nodes with overlaps = 84
Number of Nodes with overlaps = 39
Number of Nodes with overlaps = 25
Number of Nodes with overlaps = 28
Number of Nodes with overlaps = 17
Number of Nodes with overlaps = 6
Number of Nodes with overlaps = 7
Number of Nodes with overlaps = 3
Number of Nodes with overlaps = 3
Number of Nodes with overlaps = 1
Number of Nodes with overlaps = 0
INFO: [Route 35-416] Intermediate Timing Summary | WNS=-0.007 | TNS=-0.007 | WHS=N/A | THS=N/A |
Phase 4.2 Global Iteration 1 | Checksum: 2102603d0
Time (s): cpu = 00:02:42 ; elapsed = 00:00:59 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 585 ; free virtual = 10529
Phase 4.3 Global Iteration 2
Number of Nodes with overlaps = 268
Number of Nodes with overlaps = 124
Number of Nodes with overlaps = 91
Number of Nodes with overlaps = 68
Number of Nodes with overlaps = 60
Number of Nodes with overlaps = 33
Number of Nodes with overlaps = 34
Number of Nodes with overlaps = 26
Number of Nodes with overlaps = 1
Number of Nodes with overlaps = 1
Number of Nodes with overlaps = 0
INFO: [Route 35-416] Intermediate Timing Summary | WNS=0.138 | TNS=0.000 | WHS=N/A | THS=N/A |
Phase 4.3 Global Iteration 2 | Checksum: 987ca01c
Time (s): cpu = 00:03:06 ; elapsed = 00:01:10 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 587 ; free virtual = 10531
Phase 4 Rip-up And Reroute | Checksum: 987ca01c
Time (s): cpu = 00:03:06 ; elapsed = 00:01:10 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 587 ; free virtual = 10531
Phase 5 Delay and Skew Optimization
Phase 5.1 Delay CleanUp
Phase 5.1 Delay CleanUp | Checksum: 987ca01c
Time (s): cpu = 00:03:06 ; elapsed = 00:01:10 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 587 ; free virtual = 10531
Phase 5.2 Clock Skew Optimization
Phase 5.2 Clock Skew Optimization | Checksum: 987ca01c
Time (s): cpu = 00:03:06 ; elapsed = 00:01:10 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 587 ; free virtual = 10531
Phase 5 Delay and Skew Optimization | Checksum: 987ca01c
Time (s): cpu = 00:03:06 ; elapsed = 00:01:10 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 587 ; free virtual = 10531
Phase 6 Post Hold Fix
Phase 6.1 Hold Fix Iter
Phase 6.1.1 Update Timing
Phase 6.1.1 Update Timing | Checksum: 12b31b37c
Time (s): cpu = 00:03:07 ; elapsed = 00:01:11 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 587 ; free virtual = 10531
INFO: [Route 35-416] Intermediate Timing Summary | WNS=0.217 | TNS=0.000 | WHS=0.029 | THS=0.000 |
Phase 6.1 Hold Fix Iter | Checksum: 9af62b6c
Time (s): cpu = 00:03:08 ; elapsed = 00:01:11 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 587 ; free virtual = 10531
Phase 6 Post Hold Fix | Checksum: 9af62b6c
Time (s): cpu = 00:03:08 ; elapsed = 00:01:11 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 587 ; free virtual = 10531
Phase 7 Route finalize
Router Utilization Summary
Global Vertical Routing Utilization = 4.884 %
Global Horizontal Routing Utilization = 5.9145 %
Routable Net Status*
*Does not include unroutable nets such as driverless and loadless.
Run report_route_status for detailed report.
Number of Failed Nets = 0
(Failed Nets is the sum of unrouted and partially routed nets)
Number of Unrouted Nets = 0
Number of Partially Routed Nets = 0
Number of Node Overlaps = 0
Phase 7 Route finalize | Checksum: 5478b55c
Time (s): cpu = 00:03:08 ; elapsed = 00:01:11 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 587 ; free virtual = 10531
Phase 8 Verifying routed nets
Verification completed successfully
Phase 8 Verifying routed nets | Checksum: 5478b55c
Time (s): cpu = 00:03:08 ; elapsed = 00:01:11 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 586 ; free virtual = 10530
Phase 9 Depositing Routes
Phase 9 Depositing Routes | Checksum: e1f9d340
Time (s): cpu = 00:03:09 ; elapsed = 00:01:12 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 585 ; free virtual = 10529
Phase 10 Post Router Timing
INFO: [Route 35-57] Estimated Timing Summary | WNS=0.217 | TNS=0.000 | WHS=0.029 | THS=0.000 |
INFO: [Route 35-327] The final timing numbers are based on the router estimated timing analysis. For a complete and accurate timing signoff, please run report_timing_summary.
Phase 10 Post Router Timing | Checksum: e1f9d340
Time (s): cpu = 00:03:09 ; elapsed = 00:01:12 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 585 ; free virtual = 10529
INFO: [Route 35-16] Router Completed Successfully
Time (s): cpu = 00:03:09 ; elapsed = 00:01:12 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 623 ; free virtual = 10567
Routing Is Done.
INFO: [Common 17-83] Releasing license: Implementation
15 Infos, 0 Warnings, 0 Critical Warnings and 0 Errors encountered.
route_design completed successfully
route_design: Time (s): cpu = 00:03:16 ; elapsed = 00:01:14 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 623 ; free virtual = 10567
# phys_opt_design -directive default
Command: phys_opt_design -directive default
Attempting to get a license for feature 'Implementation' and/or device 'xc7a35t'
INFO: [Common 17-349] Got license for feature 'Implementation' and/or device 'xc7a35t'
INFO: [Vivado_Tcl 4-241] Physical synthesis in post route mode ( 100.0% nets are fully routed)
INFO: [Vivado_Tcl 4-137] Directive used for phys_opt_design is: default
INFO: [Vivado_Tcl 4-383] Design worst setup slack (WNS) is greater than or equal to 0.000 ns. Skipping all physical synthesis optimizations.
INFO: [Vivado_Tcl 4-232] No setup violation found. The netlist was not modified.
INFO: [Common 17-83] Releasing license: Implementation
6 Infos, 0 Warnings, 0 Critical Warnings and 0 Errors encountered.
phys_opt_design completed successfully
# write_checkpoint -force cmod7_route.dcp
INFO: [Timing 38-480] Writing timing data to binary archive.
Writing placer database...
Writing XDEF routing.
Writing XDEF routing logical nets.
Writing XDEF routing special nets.
Write XDEF Complete: Time (s): cpu = 00:00:02 ; elapsed = 00:00:00.72 . Memory (MB): peak = 3170.543 ; gain = 0.000 ; free physical = 605 ; free virtual = 10562
INFO: [Common 17-1381] The checkpoint '/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7_route.dcp' has been generated.
# report_timing_summary -no_header -no_detailed_paths
INFO: [Timing 38-91] UpdateTimingParams: Speed grade: -1, Delay Type: min_max.
INFO: [Timing 38-191] Multithreading enabled for timing update using a maximum of 8 CPUs
------------------------------------------------------------------------------------------------
| Timer Settings
| --------------
------------------------------------------------------------------------------------------------
Enable Multi Corner Analysis : Yes
Enable Pessimism Removal : Yes
Pessimism Removal Resolution : Nearest Common Node
Enable Input Delay Default Clock : No
Enable Preset / Clear Arcs : No
Disable Flight Delays : No
Ignore I/O Paths : No
Timing Early Launch at Borrowing Latches : No
Borrow Time for Max Delay Exceptions : Yes
Merge Timing Exceptions : Yes
Corner Analyze Analyze
Name Max Paths Min Paths
------ --------- ---------
Slow Yes Yes
Fast Yes Yes
check_timing report
Table of Contents
-----------------
1. checking no_clock (1)
2. checking constant_clock (0)
3. checking pulse_width_clock (0)
4. checking unconstrained_internal_endpoints (2)
5. checking no_input_delay (13)
6. checking no_output_delay (36)
7. checking multiple_clock (0)
8. checking generated_clocks (0)
9. checking loops (0)
10. checking partial_input_delay (0)
11. checking partial_output_delay (0)
12. checking latch_loops (0)
1. checking no_clock (1)
------------------------
There is 1 register/latch pin with no clock driven by root clock pin: dna_count_reg[0]/Q (HIGH)
2. checking constant_clock (0)
------------------------------
There are 0 register/latch pins with constant_clock.
3. checking pulse_width_clock (0)
---------------------------------
There are 0 register/latch pins which need pulse_width check
4. checking unconstrained_internal_endpoints (2)
------------------------------------------------
There are 2 pins that are not constrained for maximum delay. (HIGH)
There are 0 pins that are not constrained for maximum delay due to constant clock.
5. checking no_input_delay (13)
-------------------------------
There are 13 input ports with no input delay specified. (HIGH)
There are 0 input ports with no input delay but user has a false path constraint.
6. checking no_output_delay (36)
--------------------------------
There are 36 ports with no output delay specified. (HIGH)
There are 0 ports with no output delay but user has a false path constraint
There are 0 ports with no output delay but with a timing clock defined on it or propagating through it
7. checking multiple_clock (0)
------------------------------
There are 0 register/latch pins with multiple clocks.
8. checking generated_clocks (0)
--------------------------------
There are 0 generated clocks that are not connected to a clock source.
9. checking loops (0)
---------------------
There are 0 combinational loops in the design.
10. checking partial_input_delay (0)
------------------------------------
There are 0 input ports with partial input delay specified.
11. checking partial_output_delay (0)
-------------------------------------
There are 0 ports with partial output delay specified.
12. checking latch_loops (0)
----------------------------
There are 0 combinational latch loops in the design through latch input
------------------------------------------------------------------------------------------------
| Design Timing Summary
| ---------------------
------------------------------------------------------------------------------------------------
WNS(ns) TNS(ns) TNS Failing Endpoints TNS Total Endpoints WHS(ns) THS(ns) THS Failing Endpoints THS Total Endpoints WPWS(ns) TPWS(ns) TPWS Failing Endpoints TPWS Total Endpoints
------- ------- --------------------- ------------------- ------- ------- --------------------- ------------------- -------- -------- ---------------------- --------------------
0.217 0.000 0 7465 0.029 0.000 0 7465 3.750 0.000 0 2959
All user specified timing constraints are met.
------------------------------------------------------------------------------------------------
| Clock Summary
| -------------
------------------------------------------------------------------------------------------------
Clock Waveform(ns) Period(ns) Frequency(MHz)
----- ------------ ---------- --------------
clk12 {0.000 41.666} 83.333 12.000
crg_clkout0 {0.000 5.000} 10.000 100.000
subfragments_mmcm_fb {0.000 41.666} 83.333 12.000
------------------------------------------------------------------------------------------------
| Intra Clock Table
| -----------------
------------------------------------------------------------------------------------------------
Clock WNS(ns) TNS(ns) TNS Failing Endpoints TNS Total Endpoints WHS(ns) THS(ns) THS Failing Endpoints THS Total Endpoints WPWS(ns) TPWS(ns) TPWS Failing Endpoints TPWS Total Endpoints
----- ------- ------- --------------------- ------------------- ------- ------- --------------------- ------------------- -------- -------- ---------------------- --------------------
clk12 80.380 0.000 0 7 0.216 0.000 0 7 16.667 0.000 0 10
crg_clkout0 0.217 0.000 0 7172 0.029 0.000 0 7172 3.750 0.000 0 2947
subfragments_mmcm_fb 16.667 0.000 0 2
------------------------------------------------------------------------------------------------
| Inter Clock Table
| -----------------
------------------------------------------------------------------------------------------------
From Clock To Clock WNS(ns) TNS(ns) TNS Failing Endpoints TNS Total Endpoints WHS(ns) THS(ns) THS Failing Endpoints THS Total Endpoints
---------- -------- ------- ------- --------------------- ------------------- ------- ------- --------------------- -------------------
------------------------------------------------------------------------------------------------
| Other Path Groups Table
| -----------------------
------------------------------------------------------------------------------------------------
Path Group From Clock To Clock WNS(ns) TNS(ns) TNS Failing Endpoints TNS Total Endpoints WHS(ns) THS(ns) THS Failing Endpoints THS Total Endpoints
---------- ---------- -------- ------- ------- --------------------- ------------------- ------- ------- --------------------- -------------------
**async_default** crg_clkout0 crg_clkout0 0.932 0.000 0 286 0.506 0.000 0 286
# report_route_status -file cmod7_route_status.rpt
# report_drc -file cmod7_drc.rpt
Command: report_drc -file cmod7_drc.rpt
INFO: [IP_Flow 19-234] Refreshing IP repositories
INFO: [IP_Flow 19-1704] No user IP repositories specified
INFO: [IP_Flow 19-2313] Loaded Vivado IP repository '/tools/Xilinx/Vivado/2020.2/data/ip'.
INFO: [DRC 23-27] Running DRC with 8 threads
INFO: [Coretcl 2-168] The results of DRC are in file /home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/cmod7_drc.rpt.
report_drc completed successfully
# report_timing_summary -datasheet -max_paths 10 -file cmod7_timing.rpt
INFO: [Timing 38-91] UpdateTimingParams: Speed grade: -1, Delay Type: min_max.
INFO: [Timing 38-191] Multithreading enabled for timing update using a maximum of 8 CPUs
# report_power -file cmod7_power.rpt
Command: report_power -file cmod7_power.rpt
INFO: [Power 33-23] Power model is not available for DNA_PORT
Running Vector-less Activity Propagation...
Finished Running Vector-less Activity Propagation
WARNING: [Power 33-332] Found switching activity that implies high-fanout reset nets being asserted for excessive periods of time which may result in inaccurate power analysis.
Resolution: To review and fix problems, please run Power Constraints Advisor in the GUI from Tools > Power Constraints Advisor or run report_power with the -advisory option to generate a text report.
1 Infos, 1 Warnings, 0 Critical Warnings and 0 Errors encountered.
report_power completed successfully
# write_bitstream -force cmod7.bit
Command: write_bitstream -force cmod7.bit
Attempting to get a license for feature 'Implementation' and/or device 'xc7a35t'
INFO: [Common 17-349] Got license for feature 'Implementation' and/or device 'xc7a35t'
Running DRC as a precondition to command write_bitstream
INFO: [IP_Flow 19-1839] IP Catalog is up to date.
INFO: [DRC 23-27] Running DRC with 8 threads
WARNING: [DRC CFGBVS-1] Missing CFGBVS and CONFIG_VOLTAGE Design Properties: Neither the CFGBVS nor CONFIG_VOLTAGE voltage property is set in the current_design. Configuration bank voltage select (CFGBVS) must be set to VCCO or GND, and CONFIG_VOLTAGE must be set to the correct configuration voltage, in order to determine the I/O voltage support for the pins in bank 0. It is suggested to specify these either using the 'Edit Device Properties' function in the GUI or directly in the XDC file using the following syntax:
set_property CFGBVS value1 [current_design]
#where value1 is either VCCO or GND
set_property CONFIG_VOLTAGE value2 [current_design]
#where value2 is the voltage provided to configuration bank 0
Refer to the device configuration user guide for more information.
WARNING: [DRC CHECK-3] Report rule limit reached: REQP-1839 rule limit reached: 20 violations have been found.
WARNING: [DRC CHECK-3] Report rule limit reached: REQP-1840 rule limit reached: 20 violations have been found.
WARNING: [DRC DPIP-1] Input pipelining: DSP A2P_WB/execute_to_memory_MUL_HL_reg input A2P_WB/execute_to_memory_MUL_HL_reg/A[29:0] is not pipelined. Pipelining DSP48 input will improve performance.
WARNING: [DRC DPIP-1] Input pipelining: DSP A2P_WB/execute_to_memory_MUL_HL_reg input A2P_WB/execute_to_memory_MUL_HL_reg/B[17:0] is not pipelined. Pipelining DSP48 input will improve performance.
WARNING: [DRC DPIP-1] Input pipelining: DSP A2P_WB/execute_to_memory_MUL_LH_reg input A2P_WB/execute_to_memory_MUL_LH_reg/A[29:0] is not pipelined. Pipelining DSP48 input will improve performance.
WARNING: [DRC DPIP-1] Input pipelining: DSP A2P_WB/execute_to_memory_MUL_LH_reg input A2P_WB/execute_to_memory_MUL_LH_reg/B[17:0] is not pipelined. Pipelining DSP48 input will improve performance.
WARNING: [DRC DPIP-1] Input pipelining: DSP A2P_WB/execute_to_memory_MUL_LL_reg input A2P_WB/execute_to_memory_MUL_LL_reg/A[29:0] is not pipelined. Pipelining DSP48 input will improve performance.
WARNING: [DRC DPIP-1] Input pipelining: DSP A2P_WB/execute_to_memory_MUL_LL_reg input A2P_WB/execute_to_memory_MUL_LL_reg/B[17:0] is not pipelined. Pipelining DSP48 input will improve performance.
WARNING: [DRC DPIP-1] Input pipelining: DSP A2P_WB/memory_to_writeBack_MUL_HH_reg input A2P_WB/memory_to_writeBack_MUL_HH_reg/A[29:0] is not pipelined. Pipelining DSP48 input will improve performance.
WARNING: [DRC DPIP-1] Input pipelining: DSP A2P_WB/memory_to_writeBack_MUL_HH_reg input A2P_WB/memory_to_writeBack_MUL_HH_reg/B[17:0] is not pipelined. Pipelining DSP48 input will improve performance.
WARNING: [DRC DPOP-2] MREG Output pipelining: DSP A2P_WB/execute_to_memory_MUL_HL_reg multiplier stage A2P_WB/execute_to_memory_MUL_HL_reg/P[47:0] is not pipelined (MREG=0). Pipelining the multiplier function will improve performance and will save significant power so it is suggested whenever possible to fully pipeline this function. If this multiplier was inferred, it is suggested to describe an additional register stage after this function. If there is no registered adder/accumulator following the multiply function, two pipeline stages are suggested to allow both the MREG and PREG registers to be used. If the DSP48 was instantiated in the design, it is suggested to set both the MREG and PREG attributes to 1 when performing multiply functions.
WARNING: [DRC DPOP-2] MREG Output pipelining: DSP A2P_WB/execute_to_memory_MUL_LH_reg multiplier stage A2P_WB/execute_to_memory_MUL_LH_reg/P[47:0] is not pipelined (MREG=0). Pipelining the multiplier function will improve performance and will save significant power so it is suggested whenever possible to fully pipeline this function. If this multiplier was inferred, it is suggested to describe an additional register stage after this function. If there is no registered adder/accumulator following the multiply function, two pipeline stages are suggested to allow both the MREG and PREG registers to be used. If the DSP48 was instantiated in the design, it is suggested to set both the MREG and PREG attributes to 1 when performing multiply functions.
WARNING: [DRC DPOP-2] MREG Output pipelining: DSP A2P_WB/execute_to_memory_MUL_LL_reg multiplier stage A2P_WB/execute_to_memory_MUL_LL_reg/P[47:0] is not pipelined (MREG=0). Pipelining the multiplier function will improve performance and will save significant power so it is suggested whenever possible to fully pipeline this function. If this multiplier was inferred, it is suggested to describe an additional register stage after this function. If there is no registered adder/accumulator following the multiply function, two pipeline stages are suggested to allow both the MREG and PREG registers to be used. If the DSP48 was instantiated in the design, it is suggested to set both the MREG and PREG attributes to 1 when performing multiply functions.
WARNING: [DRC PDRC-153] Gated clock check: Net crg_clkin is a gated clock net sourced by a combinational pin clk12_inst/O, cell clk12_inst. This is not good design practice and will likely impact performance. For SLICE registers, for example, use the CE pin to control the loading of data.
WARNING: [DRC PLHOLDVIO-2] Non-Optimal connections which could lead to hold violations: A LUT clk12_inst is driving clock pin of 8 cells. This could lead to large hold time violations. Involved cells are:
FD, FD_1, FD_2, FD_3, FD_4, FD_5, FD_6, and FD_7
WARNING: [DRC REQP-1839] RAMB36 async control check: The RAMB36E1 A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg/ADDRARDADDR[5] (net: A2P_WB/IBusCachedPlugin_cache/lineLoader_wordIndex[0]) which is driven by a register (A2P_WB/IBusCachedPlugin_cache/lineLoader_wordIndex_reg[0]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1839] RAMB36 async control check: The RAMB36E1 A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg/ADDRARDADDR[6] (net: A2P_WB/IBusCachedPlugin_cache/lineLoader_wordIndex[1]) which is driven by a register (A2P_WB/IBusCachedPlugin_cache/lineLoader_wordIndex_reg[1]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1839] RAMB36 async control check: The RAMB36E1 A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg/ADDRARDADDR[7] (net: A2P_WB/IBusCachedPlugin_cache/lineLoader_wordIndex[2]) which is driven by a register (A2P_WB/IBusCachedPlugin_cache/lineLoader_wordIndex_reg[2]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1839] RAMB36 async control check: The RAMB36E1 A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg/ADDRBWRADDR[14] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/IBusCachedPlugin_fetchPc_inc_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1839] RAMB36 async control check: The RAMB36E1 A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg/ADDRBWRADDR[14] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/IBusCachedPlugin_fetchPc_pcReg_reg[11]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1839] RAMB36 async control check: The RAMB36E1 A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg/ADDRBWRADDR[14] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/IBusCachedPlugin_fetchPc_pcReg_reg[3]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1839] RAMB36 async control check: The RAMB36E1 A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg/ADDRBWRADDR[14] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/IBusCachedPlugin_fetchPc_pcReg_reg[7]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1839] RAMB36 async control check: The RAMB36E1 A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg/ADDRBWRADDR[14] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/IBusCachedPlugin_fetchPc_pcReg_reg[9]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1839] RAMB36 async control check: The RAMB36E1 A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg/ADDRBWRADDR[14] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/SPRPlugin_exceptionPortCtrl_exceptionValidsRegs_execute_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1839] RAMB36 async control check: The RAMB36E1 A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg/ADDRBWRADDR[14] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/SPRPlugin_exceptionPortCtrl_exceptionValidsRegs_memory_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1839] RAMB36 async control check: The RAMB36E1 A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg/ADDRBWRADDR[14] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/SPRPlugin_hadException_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1839] RAMB36 async control check: The RAMB36E1 A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg/ADDRBWRADDR[14] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/SPRPlugin_interrupt_valid_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1839] RAMB36 async control check: The RAMB36E1 A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg/ADDRBWRADDR[14] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/SPRPlugin_pipelineLiberator_pcValids_2_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1839] RAMB36 async control check: The RAMB36E1 A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg/ADDRBWRADDR[14] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/_zz_140__reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1839] RAMB36 async control check: The RAMB36E1 A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg/ADDRBWRADDR[14] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/_zz_143__reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1839] RAMB36 async control check: The RAMB36E1 A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg/ADDRBWRADDR[14] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/_zz_359__reg[1]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1839] RAMB36 async control check: The RAMB36E1 A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg/ADDRBWRADDR[14] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/_zz_365__reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1839] RAMB36 async control check: The RAMB36E1 A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg/ADDRBWRADDR[14] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/dataCache_1__io_mem_cmd_m2sPipe_rValid_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1839] RAMB36 async control check: The RAMB36E1 A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg/ADDRBWRADDR[14] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/memory_arbitration_isValid_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1839] RAMB36 async control check: The RAMB36E1 A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_datas_reg/ADDRBWRADDR[14] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/writeBack_arbitration_isValid_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1840] RAMB18 async control check: The RAMB18E1 A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg/ADDRARDADDR[11] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/IBusCachedPlugin_fetchPc_inc_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1840] RAMB18 async control check: The RAMB18E1 A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg/ADDRARDADDR[11] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/IBusCachedPlugin_fetchPc_pcReg_reg[11]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1840] RAMB18 async control check: The RAMB18E1 A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg/ADDRARDADDR[11] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/IBusCachedPlugin_fetchPc_pcReg_reg[1]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1840] RAMB18 async control check: The RAMB18E1 A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg/ADDRARDADDR[11] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/IBusCachedPlugin_fetchPc_pcReg_reg[3]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1840] RAMB18 async control check: The RAMB18E1 A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg/ADDRARDADDR[11] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/IBusCachedPlugin_fetchPc_pcReg_reg[7]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1840] RAMB18 async control check: The RAMB18E1 A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg/ADDRARDADDR[11] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/IBusCachedPlugin_fetchPc_pcReg_reg[9]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1840] RAMB18 async control check: The RAMB18E1 A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg/ADDRARDADDR[11] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/SPRPlugin_exceptionPortCtrl_exceptionValidsRegs_execute_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1840] RAMB18 async control check: The RAMB18E1 A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg/ADDRARDADDR[11] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/SPRPlugin_exceptionPortCtrl_exceptionValidsRegs_memory_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1840] RAMB18 async control check: The RAMB18E1 A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg/ADDRARDADDR[11] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/SPRPlugin_exceptionPortCtrl_exceptionValidsRegs_writeBack_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1840] RAMB18 async control check: The RAMB18E1 A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg/ADDRARDADDR[11] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/SPRPlugin_hadException_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1840] RAMB18 async control check: The RAMB18E1 A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg/ADDRARDADDR[11] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/SPRPlugin_interrupt_valid_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1840] RAMB18 async control check: The RAMB18E1 A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg/ADDRARDADDR[11] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/SPRPlugin_pipelineLiberator_pcValids_2_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1840] RAMB18 async control check: The RAMB18E1 A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg/ADDRARDADDR[11] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/_zz_140__reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1840] RAMB18 async control check: The RAMB18E1 A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg/ADDRARDADDR[11] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/_zz_143__reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1840] RAMB18 async control check: The RAMB18E1 A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg/ADDRARDADDR[11] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/_zz_359__reg[1]) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1840] RAMB18 async control check: The RAMB18E1 A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg/ADDRARDADDR[11] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/_zz_365__reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1840] RAMB18 async control check: The RAMB18E1 A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg/ADDRARDADDR[11] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/dataCache_1__io_mem_cmd_m2sPipe_rValid_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1840] RAMB18 async control check: The RAMB18E1 A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg/ADDRARDADDR[11] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/memory_arbitration_isValid_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1840] RAMB18 async control check: The RAMB18E1 A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg/ADDRARDADDR[11] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (A2P_WB/writeBack_arbitration_isValid_reg) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
WARNING: [DRC REQP-1840] RAMB18 async control check: The RAMB18E1 A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg has an input control pin A2P_WB/IBusCachedPlugin_cache/ways_0_tags_reg/ADDRARDADDR[11] (net: A2P_WB/IBusCachedPlugin_cache/_zz_500_[9]) which is driven by a register (FDPE_1) that has an active asychronous set or reset. This may cause corruption of the memory contents and/or read values when the set/reset is asserted and is not analyzed by the default static timing analysis. It is suggested to eliminate the use of a set/reset to registers driving this RAMB pin or else use a synchronous reset in which the assertion of the reset is timed by default.
INFO: [Vivado 12-3199] DRC finished with 0 Errors, 56 Warnings
INFO: [Vivado 12-3200] Please refer to the DRC report (report_drc) for more information.
INFO: [Designutils 20-2272] Running write_bitstream with 8 threads.
Loading data files...
Loading site data...
Loading route data...
Processing options...
Creating bitmap...
Creating bitstream...
Writing bitstream ./cmod7.bit...
INFO: [Vivado 12-1842] Bitgen Completed Successfully.
INFO: [Project 1-120] WebTalk data collection is mandatory when using a WebPACK part without a full Vivado license. To see the specific WebTalk data collected for your design, open the usage_statistics_webtalk.html or usage_statistics_webtalk.xml file in the implementation directory.
INFO: [Common 17-186] '/home/wtf/projects/a2p-opf/build/litex/build/cmod7/gateware/usage_statistics_webtalk.xml' has been successfully sent to Xilinx on Thu Nov 11 08:39:39 2021. For additional details about this file, please refer to the WebTalk help file at /tools/Xilinx/Vivado/2020.2/doc/webtalk_introduction.html.
INFO: [Common 17-83] Releasing license: Implementation
10 Infos, 56 Warnings, 0 Critical Warnings and 0 Errors encountered.
write_bitstream completed successfully
write_bitstream: Time (s): cpu = 00:00:21 ; elapsed = 00:00:16 . Memory (MB): peak = 3247.488 ; gain = 76.945 ; free physical = 584 ; free virtual = 10528
# quit
INFO: [Common 17-206] Exiting Vivado at Thu Nov 11 08:39:39 2021...
Copying .v and .bit, and programming...
****** Vivado v2020.2 (64-bit)
**** SW Build 3064766 on Wed Nov 18 09:12:47 MST 2020
**** IP Build 3064653 on Wed Nov 18 14:17:31 MST 2020
** Copyright 1986-2020 Xilinx, Inc. All Rights Reserved.
source pgmfpga.tcl
# open_hw_manager
# connect_hw_server
INFO: [Labtools 27-2285] Connecting to hw_server url TCP:localhost:3121
INFO: [Labtools 27-2222] Launching hw_server...
INFO: [Labtools 27-2221] Launch Output:
****** Xilinx hw_server v2020.2
**** Build date : Nov 18 2020 at 09:50:49
** Copyright 1986-2020 Xilinx, Inc. All Rights Reserved.
INFO: [Labtools 27-3415] Connecting to cs_server url TCP:localhost:3042
INFO: [Labtools 27-3417] Launching cs_server...
INFO: [Labtools 27-2221] Launch Output:
******** Xilinx cs_server v2020.2
****** Build date : Nov 03 2020-15:02:56
**** Build number : 2020.2.1604437376
** Copyright 2017-2020 Xilinx, Inc. All Rights Reserved.
# current_hw_target [get_hw_targets */xilinx_tcf/Digilent/*]
# open_hw_target
INFO: [Labtoolstcl 44-466] Opening hw_target localhost:3121/xilinx_tcf/Digilent/210328B04819A
# set dev [lindex [get_hw_devices] 0]
# current_hw_device $dev
# refresh_hw_device -update_hw_probes false $dev
INFO: [Labtools 27-1434] Device xc7a35t (JTAG device index = 0) is programmed with a design that has no supported debug core(s) in it.
# set_property PROGRAM.FILE {./cmod7.bit} $dev
# program_hw_devices $dev
INFO: [Labtools 27-3164] End of startup status: HIGH
# refresh_hw_device $dev
INFO: [Labtools 27-1434] Device xc7a35t (JTAG device index = 0) is programmed with a design that has no supported debug core(s) in it.
# puts "Device programmed."
Device programmed.
# quit
INFO: [Common 17-206] Exiting Vivado at Thu Nov 11 08:39:56 2021...
Done.
Reference in New Issue View Git Blame Copy Permalink