You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1152 lines
54 KiB
XML
1152 lines
54 KiB
XML
<?xml version="1.0" encoding="UTF-8"?>
|
|
<!--
|
|
Copyright (c) 2016, 2020 OpenPOWER Foundation
|
|
|
|
Licensed under the Apache License, Version 2.0 (the "License");
|
|
you may not use this file except in compliance with the License.
|
|
You may obtain a copy of the License at
|
|
|
|
http://www.apache.org/licenses/LICENSE-2.0
|
|
|
|
Unless required by applicable law or agreed to in writing, software
|
|
distributed under the License is distributed on an "AS IS" BASIS,
|
|
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
See the License for the specific language governing permissions and
|
|
limitations under the License.
|
|
|
|
-->
|
|
<chapter xmlns="http://docbook.org/ns/docbook"
|
|
xmlns:xl="http://www.w3.org/1999/xlink"
|
|
version="5.0"
|
|
xml:lang="en"
|
|
xml:id="dbdoclet.50569328_Address-Map">
|
|
<title>Address Map</title>
|
|
|
|
<para>The address map of an LoPAR platform is made up of several distinct
|
|
areas. These areas are one of five basic types. Each of these types has its own
|
|
general characteristics such as coherency, alignment, size restrictions,
|
|
variability of starting address and size, the system action on access of the
|
|
area, and so on. This chapter gives details on some of those characteristics,
|
|
and other chapters define the other characteristics. The variable
|
|
characteristics of these areas are reported to the OS via properties in the OF
|
|
device tree.</para>
|
|
|
|
<section xml:id="dbdoclet.50569328_42362">
|
|
<title>Address Areas</title>
|
|
<para>The following is a definition of the five areas and some of their
|
|
characteristics:</para>
|
|
|
|
<itemizedlist>
|
|
<listitem>
|
|
<para><emphasis>System Memory</emphasis> refers to memory
|
|
which forms a coherency domain with respect
|
|
to the PA processor(s) that execute application software on a system. See
|
|
<xref linkend="dbdoclet.50569329_37207"/> for details on aspects of coherence.
|
|
<emphasis>System Memory Spaces</emphasis> refer to one or more pieces that
|
|
together form the System Memory. System Memory areas may be marked with a
|
|
special value of the <emphasis role="bold"><literal>“status”</literal></emphasis> property of
|
|
“reserved” which means that this memory is not for general use by
|
|
the base OS, but may be reserved for use by OS extensions (see
|
|
<xref linkend="dbdoclet.50569329_41706"/>). Some System Memory areas may be
|
|
preservable across boots (see <xref linkend="dbdoclet.50569327_70628"/>).</para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>Peripheral Memory Space refers to a range of real addresses which
|
|
are assigned to the Memory Space of a Host Bridge (HB) or System Bus attached
|
|
IOA, and which are sufficient to contain all of the Load and Store address
|
|
space requirements of all IOAs in the Memory Space of the I/O bus that is
|
|
generated by the HB or which are encompassed by the System Bus attached IOA.
|
|
The frame buffer of a graphics IOA is an example of a device which may reside
|
|
in the Peripheral Memory Space. Due to space limitations in the address space
|
|
below 4 GB, the HBs of platforms may split this space into two pieces; one to
|
|
support the IOAs that need to have their addresses below 4 GB (because they
|
|
only support 32-bit addresses) and another to support the IOAs that can have
|
|
their addresses above 4 GB (because they support 64-bit addresses). In addition
|
|
to a Memory Space, many types of I/O buses have a separate address space called
|
|
the I/O Space. An HB which generates such I/O buses must decode another address
|
|
range, the Peripheral I/O Space.<footnote xml:id="pgfId-128932"><para>A
|
|
peripheral space may also include a “configuration” address
|
|
space. The configuration space is abstracted by a Run-Time Abstraction Service
|
|
(for example, see <xref linkend="dbdoclet.50569332_14852"/>).</para></footnote></para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>Peripheral I/O Space refers to a range of real addresses which
|
|
are assigned to the I/O Space of an HB or System Bus attached IOA and which are
|
|
sufficient to contain all of the Load and Store address space requirements of
|
|
all the IOAs in the I/O Space of the I/O bus that is generated by the HB or
|
|
which are encompassed by the System Bus IOA. A keyboard controller is an
|
|
example of an IOA which may require Peripheral I/O Space addresses. </para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>System Control Area (SCA) refers to a range of addresses which
|
|
contains all reserved addresses (architected or unarchitected) which are not
|
|
part of one of the other defined address spaces. For example, the system ROM(s),
|
|
unarchitected platform-dependent addresses used by firmware and Run-Time
|
|
Abstraction Services for control of the platform, and architected entities like
|
|
interrupt controller addresses when those addresses are not in another defined
|
|
address space. </para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>Undefined refers to areas that are not one of the above four
|
|
areas. The result of accessing one of these areas is defined in <xref
|
|
linkend="dbdoclet.50569337_52952"/> as an invalid address error.</para>
|
|
</listitem>
|
|
</itemizedlist>
|
|
|
|
<para>In addition to the above definitions, it is convenient, relative to
|
|
I/O op erations, to define a Partitionable Endpoint. A <emphasis>Partitionable
|
|
Endpoint</emphasis> (PE) is an I/O subtree that can be treated as a unit for
|
|
the purposes of partitioning and error recovery. A PE may be a single or
|
|
multi-function IOA, a function of a multi-function IOA, or multiple IOAs
|
|
(possibly including switch and bridge structures above the multiple IOAs). See
|
|
<xref linkend="dbdoclet.50569330_34831"/> for more information about PEs.</para>
|
|
<para>In describing the characteristics of these various areas, it is
|
|
convenient to have a nomenclature for the various boundary addresses.
|
|
<xref linkend="dbdoclet.50569328_34186"/> defines the labels which are used in this
|
|
document when describing the various address ranges. Note that
|
|
“bottom” refers to the smallest address of the range and
|
|
“top” refers to the largest address.</para>
|
|
|
|
<table frame="all" pgwide="1" xml:id="dbdoclet.50569328_34186">
|
|
<title>Map Legend </title>
|
|
<tgroup cols="2">
|
|
<colspec colname="c1" colwidth="20*" align="center"/>
|
|
<colspec colname="c2" colwidth="80*"/>
|
|
<thead valign="middle">
|
|
<row>
|
|
<entry>
|
|
<para>
|
|
<emphasis role="bold">Label</emphasis>
|
|
</para>
|
|
</entry>
|
|
<entry align="center">
|
|
<para>
|
|
<emphasis role="bold">Description</emphasis>
|
|
</para>
|
|
</entry>
|
|
</row>
|
|
</thead>
|
|
<tbody valign="middle">
|
|
<row>
|
|
<entry>
|
|
<para> BIOn</para>
|
|
</entry>
|
|
<entry>
|
|
<para> Bottom of Peripheral I/O Space for HBn (n=0, 1, 2,...).
|
|
The OF property <emphasis role="bold"><literal>“ranges”</literal></emphasis>
|
|
in the OF device tree for HBn contains the value of BIOn.</para>
|
|
</entry>
|
|
</row>
|
|
<row>
|
|
<entry>
|
|
<para> TIOn</para>
|
|
</entry>
|
|
<entry>
|
|
<para> Top of Peripheral I/O Space for HBn (n=0, 1, 2,...). The
|
|
value of TIOn can be determined by adding the size of the area as found in the
|
|
OF property <emphasis role="bold"><literal>“ranges”</literal></emphasis> in the OF device tree
|
|
for HBn to the value of BIOn found in that same property and then subtracting
|
|
1.</para>
|
|
<para>This architecture allows at most one Peripheral I/O area
|
|
per HB which may be above or below 4 GB. For any given n, BIOn to TIOn cannot
|
|
span from the first 4 GB of address space to the second.</para>
|
|
</entry>
|
|
</row>
|
|
<row>
|
|
<entry>
|
|
<para> BPMn,m</para>
|
|
</entry>
|
|
<entry>
|
|
<para> Bottom of Peripheral Memory Space m (m=0,1) for HBn (n=0,
|
|
1, 2,...), as viewed from the system side of HBn. The OF property
|
|
<emphasis role="bold"><literal>“ranges”</literal></emphasis> in the OF device tree for HBn contains the
|
|
value of BPMn,m.</para>
|
|
</entry>
|
|
</row>
|
|
<row>
|
|
<entry>
|
|
<para> BPM’n,m</para>
|
|
</entry>
|
|
<entry>
|
|
<para> Bottom of Peripheral Memory Space m (m=0,1) for HBn (n=0,
|
|
1, 2,...), as viewed from the I/O side of the HBn. That is, this is the value
|
|
to which BPMn,m gets translated to as it passes through the HB. The OF property
|
|
<emphasis role="bold"><literal>“ranges”</literal></emphasis> in the OF device tree for HBn
|
|
contains the value of BPM’n,m. BPM’n,m may be equal to BPMn,m or
|
|
may not be.</para>
|
|
</entry>
|
|
</row>
|
|
<row>
|
|
<entry>
|
|
<para> TPMn,m</para>
|
|
</entry>
|
|
<entry>
|
|
<para> Top of Peripheral Memory Space m (m=0,1) for HBn (n=0, 1,
|
|
2,...) as viewed from the system side of HBn. The Peripheral Memory Space
|
|
address range is in the OF device tree, as indicated by the
|
|
<emphasis role="bold"><literal>“ranges”</literal></emphasis> property in the node in the OF device tree
|
|
for HBn; BPMn,m to TPMn,m. The value of TPMn,m can be determined by adding the
|
|
size of the area as found in the OF property
|
|
<emphasis role="bold"><literal>“ranges”</literal></emphasis> in the OF device tree for HBn to the value of
|
|
BPMn,m found in that same property and then subtracting 1.</para>
|
|
<para>This architecture allows for one or two Peripheral Memory
|
|
areas per HB (hence, m=0,1). A Peripheral Memory area may be above 4 GB or
|
|
below. For any given n, BPMn,m to TPMn,m cannot span from the first 4 GB of
|
|
address space to the second.</para>
|
|
</entry>
|
|
</row>
|
|
<row>
|
|
<entry>
|
|
<para> TPM’n,m</para>
|
|
</entry>
|
|
<entry>
|
|
<para> Top of Peripheral Memory Space m (m=0,1) for HBn (n=0, 1,
|
|
2,...) as viewed from the I/O side of HBn. The value of TPM’n,m can be
|
|
calculated from the values in the<emphasis role="bold"><literal>“ranges”</literal></emphasis>
|
|
property as was TPMn,m. In some cases TPM’n,m is required to be equal to
|
|
TPMn,m and in some cases it is not required to be equal. For any given n,
|
|
BPM’n,m to TPM’n,m cannot span from the first 4 GB of address
|
|
space to the second.</para>
|
|
</entry>
|
|
</row>
|
|
<row>
|
|
<entry>
|
|
<para> BSCAn</para>
|
|
</entry>
|
|
<entry>
|
|
<para> Bottom of System Control Area. Corresponding top of the
|
|
System Control Area is TSCAn. This architecture allows for one or two SCAs per
|
|
platform. The SCA below 4 GB is at the top (largest addresses) of the lower 4
|
|
GB range. </para>
|
|
</entry>
|
|
</row>
|
|
<row>
|
|
<entry>
|
|
<para> TSCAn</para>
|
|
</entry>
|
|
<entry>
|
|
<para> Top of System Control Area. For any given n, BSCAn to
|
|
TSCAn cannot span from the first 4 GB of address space to the second.</para>
|
|
</entry>
|
|
</row>
|
|
<row>
|
|
<entry>
|
|
<para> BSMn</para>
|
|
</entry>
|
|
<entry>
|
|
<para> Bottom of System Memory Space n (n=0, 1, 2,...); BSM0 = 0.
|
|
The OF property <emphasis role="bold"><literal>“reg”</literal></emphasis> in the OF device tree
|
|
for the Memory Controller’s node contains the value of BSMn.</para>
|
|
</entry>
|
|
</row>
|
|
<row>
|
|
<entry>
|
|
<para> TSMn</para>
|
|
</entry>
|
|
<entry>
|
|
<para> Top of System Memory Space n (n=0, 1, 2,...). The value of
|
|
TSMn can be determined by adding the value of BSMn as found in the Memory
|
|
Controller’s node of the OF device tree to the value of the size of that
|
|
area as found in the same property, and then subtracting 1.</para>
|
|
</entry>
|
|
</row>
|
|
<row>
|
|
<entry>
|
|
<para> BTTAn,m</para>
|
|
</entry>
|
|
<entry>
|
|
<para> Bottom of TCE Translatable Address space m (m=0, 1, 2,...)
|
|
for HBn (n=0, 1, 2,...) as viewed from the I/O side of HBn. This is the bottom
|
|
of an address range that is translatable by a Translation Control Entry (TCE)
|
|
table. The value of BTTAn,m is obtained from the
|
|
<emphasis role="bold"><literal>“ibm,dma-window”</literal></emphasis> or
|
|
<emphasis role="bold"><literal>“ibm,my-dma-window”</literal></emphasis> property in the OF device
|
|
tree.</para>
|
|
</entry>
|
|
</row>
|
|
<row>
|
|
<entry>
|
|
<para> TTTAn,m</para>
|
|
</entry>
|
|
<entry>
|
|
<para> Top of TCE Translatable Address space m (m=0, 1, 2,...)
|
|
for HBn (n=0, 1, 2,...) as viewed from the I/O side of HBn. This is the top of
|
|
an address range that is translatable by a TCE table. The range BTTAn,m to
|
|
TTTAn,m is not accessible by more than one PE for any given “n”.
|
|
The value of TTTAn,m can be determined by adding the size of the area as found
|
|
in the OF property <emphasis role="bold"><literal>“ibm,dma-window”</literal></emphasis> or
|
|
<emphasis role="bold"><literal>“ibm,my-dma-window”</literal></emphasis> in the OF device tree
|
|
for HBn to the value of BTTAn,m found in that same property and then
|
|
subtracting 1.</para>
|
|
</entry>
|
|
</row>
|
|
</tbody>
|
|
</tgroup>
|
|
</table>
|
|
<para>The figures found in <xref linkend="dbdoclet.50569328_70508"/>, show
|
|
examples of the areas referenced by the labels in <xref
|
|
linkend="dbdoclet.50569328_34186"/>.</para>
|
|
<para>The OS and other software should not use fixed addresses for these
|
|
various areas. A given platform may, however, make some of these addresses
|
|
unchangeable. Each of these areas is defined in the OF device tree in the node
|
|
of the appropriate controller. This gives platforms the most flexibility in
|
|
implementing the System Address Map to meet their market requirements. </para>
|
|
|
|
<variablelist>
|
|
<varlistentry xml:id="dbdoclet.50569328_66354">
|
|
<term><emphasis role="bold">R2-<xref linkend="dbdoclet.50569328_42362"
|
|
xrefstyle="select: labelnumber nopage"/>-1.</emphasis></term>
|
|
<listitem>
|
|
<para>All unavailable addresses in the Peripheral Memory and Peripheral
|
|
I/O Spaces must be conveyed in the OF device tree.</para>
|
|
|
|
<orderedlist numeration="loweralpha">
|
|
<listitem>
|
|
<para>A <emphasis role="bold"><literal>“device_type”</literal></emphasis> of
|
|
<emphasis role="bold"><literal>“reserved”</literal></emphasis> must be used to specify areas which are not
|
|
to be used by software and not otherwise reported by OF.</para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>Shadow aliases must be communicated as specified by the
|
|
appropriate OF bus binding.</para>
|
|
</listitem>
|
|
</orderedlist>
|
|
</listitem>
|
|
</varlistentry>
|
|
|
|
<varlistentry>
|
|
<term><emphasis role="bold">R2-<xref linkend="dbdoclet.50569328_42362"
|
|
xrefstyle="select: labelnumber nopage"/>-2.</emphasis></term>
|
|
<listitem>
|
|
<para>There must not be any address generated by
|
|
the system which causes the system to hang.</para>
|
|
</listitem>
|
|
</varlistentry>
|
|
</variablelist>
|
|
|
|
<para><emphasis role="bold">Hardware Implementation Note:</emphasis> The reason for Requirement
|
|
<xref linkend="dbdoclet.50569328_66354"/> is to reserve address space for registers
|
|
used only by the firmware or addresses which are used only by the
|
|
hardware.</para>
|
|
</section>
|
|
|
|
<section xml:id="dbdoclet.50569328_28737">
|
|
<title> Address Decoding (or Validating) and Translation</title>
|
|
<para>In general, different components in the hardware are going to decode
|
|
the address ranges for the various areas. In some cases the component may be
|
|
required to translate the address to a new address as it passes through the
|
|
component. The requirements, below, describe the various system address decodes
|
|
(or validating) and, where appropriate, what address transforms take place
|
|
outside of the processor. </para>
|
|
<para>The HB requirements in this section refer to HBs which are defined by
|
|
this architecture. Currently, there is only one HB defined by this
|
|
architecture, and that is the PHB. HBs which implement I/O buses other than
|
|
those defined by this architecture may or may not require changes to this
|
|
addressing model. </para>
|
|
<para>The reader may want to reference the example address maps found in
|
|
<xref linkend="dbdoclet.50569328_70508"/>, while reading through the
|
|
requirements of this section.</para>
|
|
|
|
<section xml:id="sec_address_map_address_xlate">
|
|
<title> <emphasis>Load</emphasis> and <emphasis>Store</emphasis>
|
|
Address Decoding and Translation</title>
|
|
|
|
<para><emphasis>Load</emphasis> and <emphasis>Store</emphasis>
|
|
operations may be targeted at System Memory or I/O. The latter is called Memory
|
|
Mapped I/O (MMIO). </para>
|
|
|
|
<variablelist>
|
|
<varlistentry>
|
|
<term><emphasis role="bold">R2-<xref linkend="sec_address_map_address_xlate"
|
|
xrefstyle="select: labelnumber nopage"/>-1.</emphasis></term>
|
|
<listitem>
|
|
<para>Processor Load and Store
|
|
operations must be routed and translated as shown in <xref
|
|
linkend="dbdoclet.50569328_29870"/>.</para>
|
|
</listitem>
|
|
</varlistentry>
|
|
</variablelist>
|
|
|
|
<table frame="all" pgwide="1" xml:id="dbdoclet.50569328_29870">
|
|
<title>Processor Bus Address Space Decoding and Translation</title>
|
|
<tgroup cols="3">
|
|
<colspec colname="c1" colwidth="20*" align="center"/>
|
|
<colspec colname="c2" colwidth="50*"/>
|
|
<colspec colname="c3" colwidth="30*"/>
|
|
<thead valign="middle">
|
|
<row>
|
|
<entry>
|
|
<para>
|
|
<emphasis role="bold">Address Range at Processor
|
|
Bus</emphasis>
|
|
</para>
|
|
</entry>
|
|
<entry align="center">
|
|
<para>
|
|
<emphasis role="bold">Route and Translation
|
|
Requirements</emphasis>
|
|
</para>
|
|
</entry>
|
|
<entry align="center">
|
|
<para>
|
|
<emphasis role="bold">Other Requirements and
|
|
Comments</emphasis>
|
|
</para>
|
|
</entry>
|
|
</row>
|
|
</thead>
|
|
<tbody valign="middle">
|
|
<row>
|
|
<entry>
|
|
<para>BSCAn to TSCAn<?linebreak?>
|
|
(n=0, 1)</para>
|
|
</entry>
|
|
<entry>
|
|
<para> To ROM controller or to a platform dependent area.
|
|
Translation dependent on implementation.</para>
|
|
</entry>
|
|
<entry>
|
|
<para> Areas other than ROM are reserved for firmware use, or
|
|
have their address passed by the OF device tree.</para>
|
|
</entry>
|
|
</row>
|
|
<row>
|
|
<entry>
|
|
<para>BIOn to TIOn<?linebreak?>
|
|
(n=0,1, 2,...)</para>
|
|
</entry>
|
|
<entry>
|
|
<para> Send through the HB to the I/O space of the I/O bus,
|
|
translating by subtracting the value of BIO from each address in this range
|
|
(that is, translate BIO to TIO to be at 0 to (TIO - BIO) on the I/O
|
|
side).</para>
|
|
</entry>
|
|
<entry>
|
|
<para>  </para>
|
|
</entry>
|
|
</row>
|
|
<row>
|
|
<entry>
|
|
<para>BPMn,m to TPMn,m<?linebreak?>
|
|
(n=0, 1, 2,...)<?linebreak?>
|
|
(m=0, 1)</para>
|
|
</entry>
|
|
<entry>
|
|
<para> Send through HBn to the Memory Space of the I/O bus.</para>
|
|
<itemizedlist>
|
|
<listitem>
|
|
<para>If BPMn,m < 4 GB, do not translate an address in the
|
|
BPMn,m to TPMn,m range as the transaction passes through the bridge (that is,
|
|
BPM’n,m = BPMn,m and TPM’n,m = TPMn,m).</para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>If BPMn,m is at or above 4 GB then if BPM’n,m is
|
|
to be below 4 GB (for 32-bit IOAs) then translate addresses in the BPMn,m to
|
|
TPMn,m range so that this address range becomes BPM’n,m to
|
|
TPM’n,m (where BPM’n,m and TPM’n,m are less than 4 GB) as
|
|
the transaction passes through the bridge, otherwise do not translate an
|
|
address in the BPMn,m to TPMn,m range as the transaction passes through the
|
|
bridge (for 64-bit IOAs which are configured at or above 4 GB).</para>
|
|
</listitem>
|
|
</itemizedlist>
|
|
</entry>
|
|
<entry>
|
|
<para> Platforms that need to support both 32-bit capable and
|
|
64-bit capable IOAs and do not want to configure the 64-bit capable IOAs below
|
|
4 GB need to support two Peripheral Memory spaces per HB.</para>
|
|
</entry>
|
|
</row>
|
|
<row>
|
|
<entry>
|
|
<para>BSMm to TSMm<?linebreak?>
|
|
(m>0)</para>
|
|
</entry>
|
|
<entry>
|
|
<para> To System Memory Space m, no translation.</para>
|
|
</entry>
|
|
<entry>
|
|
<para> Can be at or above 4 GB, or below BSCA0. </para>
|
|
</entry>
|
|
</row>
|
|
<row>
|
|
<entry>
|
|
<para> 0 to TSM0</para>
|
|
</entry>
|
|
<entry>
|
|
<para> To System Memory Space 0, no translation</para>
|
|
</entry>
|
|
<entry>
|
|
<para>  </para>
|
|
</entry>
|
|
</row>
|
|
<row>
|
|
<entry>
|
|
<para> All other addresses</para>
|
|
</entry>
|
|
<entry>
|
|
<para> See <xref linkend="dbdoclet.50569337_52952"/>.</para>
|
|
</entry>
|
|
<entry>
|
|
<para> Access is to undefined space.</para>
|
|
</entry>
|
|
</row>
|
|
</tbody>
|
|
</tgroup>
|
|
</table>
|
|
|
|
<variablelist>
|
|
<varlistentry>
|
|
<term><emphasis role="bold">R2-<xref linkend="sec_address_map_address_xlate"
|
|
xrefstyle="select: labelnumber nopage"/>-2.</emphasis></term>
|
|
<listitem>
|
|
<para>There must be no architected address
|
|
spaces (Peripheral Memory, Peripheral I/O, SCA, or System Memory) which span
|
|
the (4GB - 1) to 4 GB boundary.</para>
|
|
</listitem>
|
|
</varlistentry>
|
|
|
|
<varlistentry>
|
|
<term><emphasis role="bold">R2-<xref linkend="sec_address_map_address_xlate"
|
|
xrefstyle="select: labelnumber nopage"/>-3.</emphasis></term>
|
|
<listitem>
|
|
<para>The following are the System Control Area requirements:</para>
|
|
|
|
<orderedlist numeration="loweralpha">
|
|
<listitem xml:id="dbdoclet.50569328_15915">
|
|
<para>The platform must have at most one System Control Area below 4 GB
|
|
and at most one per platform or per NUMA node at or above 4 GB.</para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>The System Control Area must not overlap with the System Memory
|
|
Space(s), Peripheral Memory Space(s), or the Peripheral I/O Space(s) in the
|
|
platform.</para>
|
|
</listitem>
|
|
</orderedlist>
|
|
</listitem>
|
|
</varlistentry>
|
|
|
|
<varlistentry xml:id="dbdoclet.50569328_18841">
|
|
<term><emphasis role="bold">R2-<xref linkend="sec_address_map_address_xlate"
|
|
xrefstyle="select: labelnumber nopage"/>-4.</emphasis></term>
|
|
<listitem>
|
|
<para>The following are the System Memory Space requirements:</para>
|
|
|
|
<orderedlist numeration="loweralpha">
|
|
<listitem>
|
|
<para>Each platform must have at least one System Memory Space.</para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>The System Memory Space(s) must not overlap with the Peripheral I/O
|
|
Space(s), Peripheral Memory Space(s), the System Control Area, or other System
|
|
Memory Space(s) in the platform.</para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>The first System Memory Space must start at address 0 (BSM0 = 0),
|
|
must be at least 128 MB before a second System Memory Space is added and must
|
|
be contiguous.</para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>Each of the additional (optional) System Memory Space(s)
|
|
must start on a 4 KB boundary.</para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>Each of the additional (optional) System Memory Space(s)
|
|
must be contiguous within itself.</para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>There must be at most eight System Memory Spaces below BSCA0 and
|
|
at most eight at or above 4 GB.</para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>If multiple System Memory Spaces exist below 4 GB, then they
|
|
must not have any Peripheral Memory or Peripheral I/O Spaces interspersed
|
|
between them and if multiple System Memory Spaces exist above 4 GB, then they
|
|
must not have any Peripheral Memory or Peripheral I/O Spaces interspersed
|
|
between them. </para>
|
|
</listitem>
|
|
</orderedlist>
|
|
</listitem>
|
|
</varlistentry>
|
|
|
|
<varlistentry xml:id="dbdoclet.50569328_81773">
|
|
<term><emphasis role="bold">R2-<xref linkend="sec_address_map_address_xlate"
|
|
xrefstyle="select: labelnumber nopage"/>-5.</emphasis></term>
|
|
<listitem>
|
|
<para>The following are the Peripheral Memory Space requirements:</para>
|
|
|
|
<orderedlist numeration="loweralpha">
|
|
<listitem>
|
|
<para>The Peripheral Memory Space(s) must not overlap with the System
|
|
Memory Space(s), Peripheral I/O Space(s), the System Control Area, or other
|
|
Peripheral Memory Space(s) in the platform.</para>
|
|
</listitem>
|
|
|
|
<listitem xml:id="dbdoclet.50569328_50885">
|
|
<para>The size of each
|
|
Peripheral Memory Space (TPMn,m - BPMn,m + 1) must be a power of two for sizes
|
|
up to and including 256 MB, with the minimum size being 1 MB, and an integer
|
|
multiple of 256 MB plus a power of two which is greater than or equal to 1 MB
|
|
for sizes greater than 256 MB (for example, 1 MB, 2 MB, 4 MB, 8 MB, 16 MB, 32
|
|
MB, 64 MB, 128 MB, 256 MB, (256 + 1) MB, (256 + 2) MB,..., (512 + 1)
|
|
MB,...).</para>
|
|
</listitem>
|
|
|
|
<listitem xml:id="dbdoclet.50569328_88434">
|
|
<para>The boundary alignment for each Peripheral Memory Space must be an integer multiple
|
|
of the size of the space up to and including 256 MB and must be an integer
|
|
multiple of 256 MB for sizes greater than 256 MB.</para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>There must be at most two Peripheral Memory Spaces per HB.
|
|
</para>
|
|
</listitem>
|
|
|
|
<listitem xml:id="dbdoclet.50569328_33398">
|
|
<para>If the Peripheral Memory Space for a HB is below 4 GB, then the
|
|
address must not be translated as it passes through the HB from the system side
|
|
to the I/O side of the HB (see <xref
|
|
linkend="dbdoclet.50569328_29870"/>).</para>
|
|
</listitem>
|
|
|
|
<listitem xml:id="dbdoclet.50569328_44965">
|
|
<para>If the Peripheral Memory Space for a HB is above 4 GB, then the
|
|
address may or may not be translated as it passes through the HB from the
|
|
system side to the I/O side of the HB, but if it is translated, then the
|
|
translated address range must be aligned on a boundary which is an integer
|
|
multiple of the size of the Peripheral Memory Space.</para>
|
|
</listitem>
|
|
</orderedlist>
|
|
</listitem>
|
|
</varlistentry>
|
|
</variablelist>
|
|
|
|
<para><emphasis role="bold">Implementation Note:</emphasis> Relative to Requirement
|
|
<xref linkend="dbdoclet.50569328_81773"/><xref
|
|
linkend="dbdoclet.50569328_44965"/>, not all OSs can support BPM’ to
|
|
TPM’ being above 4 GB.</para>
|
|
|
|
<variablelist>
|
|
<varlistentry xml:id="dbdoclet.50569328_14048">
|
|
<term><emphasis role="bold">R2-<xref linkend="sec_address_map_address_xlate"
|
|
xrefstyle="select: labelnumber nopage"/>-6.</emphasis></term>
|
|
<listitem>
|
|
<para>The following are the Peripheral I/O Space requirements:</para>
|
|
|
|
<orderedlist numeration="loweralpha">
|
|
<listitem>
|
|
<para>The Peripheral I/O Space(s) must not overlap with the System
|
|
Memory Space(s), Peripheral Memory Space(s), the System Control Area, or other
|
|
Peripheral I/O Space(s) in the platform.</para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>The size of each Peripheral I/O Space (TIOn - BIOn + 1) must be a
|
|
power of two with the minimum size being 64 KB (that is, sizes of 64 KB, 128
|
|
KB, 256 KB, 512 KB, 1 MB, 2 MB, 4 MB, 8 MB, 16 MB, 32 MB, 64 MB, and so on, are
|
|
acceptable).</para>
|
|
</listitem>
|
|
|
|
<listitem xml:id="dbdoclet.50569328_47269">
|
|
<para>The boundary alignment for each Peripheral I/O Space must be an integer multiple of the size of
|
|
the space.</para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>There must be at most one Peripheral I/O Space per
|
|
HB.</para>
|
|
</listitem>
|
|
</orderedlist>
|
|
</listitem>
|
|
</varlistentry>
|
|
|
|
<varlistentry xml:id="dbdoclet.50569328_63622">
|
|
<term><emphasis role="bold">R2-<xref linkend="sec_address_map_address_xlate"
|
|
xrefstyle="select: labelnumber nopage"/>-7.</emphasis></term>
|
|
<listitem>
|
|
<para>All System Memory must be
|
|
accessible via DMA operation from all IOAs in the system, except where LPAR
|
|
requirements limit accessibility of an IOA belonging to one partition to the
|
|
System Memory of another partition.</para>
|
|
</listitem>
|
|
</varlistentry>
|
|
</variablelist>
|
|
|
|
<para><emphasis role="bold">Hardware Implementation Notes:</emphasis> Memory controller and memory card
|
|
designers who are designing for 64-bit platforms should be careful to consider
|
|
that the amount of I/O space below 4 GB is reduced by the amount of System
|
|
Memory space below 4 GB. Therefore it may be prudent to design the hardware to
|
|
allow minimization of the amount of System Memory below 4 GB, in order to allow
|
|
maximization of the space for 32-bit Peripheral Memory and Peripheral I/O
|
|
spaces below 4 GB.</para>
|
|
<para>The beginning addresses and sizes of the Peripheral I/O Space(s)
|
|
and Peripheral
|
|
Memory Space(s), are controlled by firmware. Information about the address map
|
|
is reported by the OF Device Tree or, for items that can change, through RTAS
|
|
calls (for example, for Dynamic Reconfiguration, through the
|
|
<emphasis>ibm,configure-connector</emphasis> RTAS call). </para>
|
|
<para>Certain System Memory addresses must be reserved in all systems for
|
|
specific uses (see <xref linkend="dbdoclet.50569329_27369"/> and <xref
|
|
linkend="dbdoclet.50569329_41706"/> for more information).</para>
|
|
</section>
|
|
<section xml:id="dbdoclet.50569328_17364">
|
|
<title> DMA Address Validation and Translation</title>
|
|
<para><xref linkend="dbdoclet.50569328_18795"/> is a representation of
|
|
how the validation and translation mechanism works, along with a description of
|
|
the steps which are involved. At the core of the translation mechanism is the
|
|
Translation and Control Entry (TCE) table. </para>
|
|
|
|
<figure xml:id="dbdoclet.50569328_18795">
|
|
<title>PE DMA Address Validation and Translation in the Platform</title>
|
|
<mediaobject>
|
|
<imageobject role="html">
|
|
<imagedata fileref="figures/PAPR-8.gif" format="GIF" scalefit="1"/>
|
|
</imageobject>
|
|
<imageobject role="fo">
|
|
<imagedata contentdepth="100%" fileref="figures/PAPR-8.gif"
|
|
format="GIF" scalefit="1" width="100%"/>
|
|
</imageobject>
|
|
</mediaobject>
|
|
</figure>
|
|
|
|
<section xml:id="sec_address_map_dma_req">
|
|
<title>DMA Addressing Requirements</title>
|
|
|
|
<variablelist>
|
|
<varlistentry>
|
|
<term><emphasis role="bold">R2-<xref linkend="sec_address_map_dma_req"
|
|
xrefstyle="select: labelnumber nopage"/>-1.</emphasis></term>
|
|
<listitem>
|
|
<para>Upon receiving a DMA
|
|
transaction to the Memory Space of an I/O bus, the HB must perform the
|
|
validation and translation steps, as indicated in
|
|
<xref linkend="dbdoclet.50569328_18795"/> and in
|
|
<xref linkend="dbdoclet.50569328_74684"/>.</para>
|
|
</listitem>
|
|
</varlistentry>
|
|
</variablelist>
|
|
|
|
<table frame="all" pgwide="1" xml:id="dbdoclet.50569328_74684">
|
|
<title>DMA Address Decoding and Translation (I/O Bus Memory
|
|
Space) </title>
|
|
<tgroup cols="3">
|
|
<colspec colname="c1" colwidth="20*" align="center"/>
|
|
<colspec colname="c2" colwidth="50*"/>
|
|
<colspec colname="c3" colwidth="30*"/>
|
|
<thead valign="middle">
|
|
<row>
|
|
<entry>
|
|
<para>
|
|
<emphasis role="bold">Address Range at I/O Side of
|
|
HBn</emphasis>
|
|
</para>
|
|
</entry>
|
|
<entry align="center">
|
|
<para>
|
|
<emphasis role="bold">Route and Translation
|
|
Requirements</emphasis>
|
|
</para>
|
|
</entry>
|
|
<entry align="center">
|
|
<para>
|
|
<emphasis role="bold">Other Requirements and
|
|
Comments</emphasis>
|
|
</para>
|
|
</entry>
|
|
</row>
|
|
</thead>
|
|
<tbody valign="middle">
|
|
<row>
|
|
<entry>
|
|
<para>BPM’n,m to TPM’n,m<?linebreak?>
|
|
(n=0, 1, 2,...)<?linebreak?>
|
|
(m=0, 1)<?linebreak?>
|
|
(note 1)</para>
|
|
</entry>
|
|
<entry>
|
|
<para> HB does not respond or responds and signals an invalid
|
|
address error (See <xref linkend="dbdoclet.50569337_52952"/>).</para>
|
|
</entry>
|
|
<entry>
|
|
<para>  </para>
|
|
</entry>
|
|
</row>
|
|
<row>
|
|
<entry>
|
|
<para> BTTAn,m to TTTAn,m<?linebreak?>
|
|
(n=0, 1, 2,...)<?linebreak?>
|
|
(m=0, 1, 2,...)<?linebreak?>
|
|
(note 1)</para>
|
|
</entry>
|
|
<entry>
|
|
<para> If the PE that is trying to access this space is allowed
|
|
to access this space, then translate via the TCE table (as specified in <xref
|
|
linkend="dbdoclet.50569328_76588"/>) and pass the translated address through
|
|
the HB, otherwise generate an invalid address or TCE extent error, as
|
|
appropriate (See <xref linkend="dbdoclet.50569337_52952"/>). </para>
|
|
</entry>
|
|
<entry>
|
|
<para> See Notes 2, 3</para>
|
|
</entry>
|
|
</row>
|
|
<row>
|
|
<entry>
|
|
<para> All other addresses</para>
|
|
</entry>
|
|
<entry>
|
|
<para> Generate an invalid address error (See <xref linkend="dbdoclet.50569337_52952"/>).</para>
|
|
</entry>
|
|
<entry>
|
|
<para> See Note 3</para>
|
|
</entry>
|
|
</row>
|
|
<row>
|
|
<entry nameend="c3" namest="c1" align="left">
|
|
<para><emphasis role="bold">Notes:</emphasis>
|
|
<orderedlist spacing="compact">
|
|
<listitem>
|
|
<para>n = # of HB Viewing or Receiving the Operation, m = #
|
|
of instance within the HB.</para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>After translation of the address, if the translated
|
|
address would re-access the same HB or another HB (for example, is in the
|
|
Peripheral Memory Space or Peripheral I/O Space of that HB or another HB), then
|
|
the HB generates an invalid address error (See <xref
|
|
linkend="dbdoclet.50569337_52952"/>).</para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>If the Enhanced I/O Error Handling (EEH) option is
|
|
implemented and enabled, then on an error, the PE will enter the DMA Stopped
|
|
State (See <xref linkend="dbdoclet.50569330_17337"/>).</para>
|
|
</listitem>
|
|
</orderedlist>
|
|
</para>
|
|
</entry>
|
|
</row>
|
|
</tbody>
|
|
</tgroup>
|
|
</table>
|
|
|
|
<variablelist>
|
|
<varlistentry xml:id="dbdoclet.50569328_12543">
|
|
<term><emphasis role="bold">R2-<xref linkend="sec_address_map_dma_req"
|
|
xrefstyle="select: labelnumber nopage"/>-2.</emphasis></term>
|
|
<listitem>
|
|
<para>An HB must not act as a target
|
|
for operations in the I/O Space of an I/O bus.</para>
|
|
</listitem>
|
|
</varlistentry>
|
|
</variablelist>
|
|
</section>
|
|
<section xml:id="dbdoclet.50569328_76588">
|
|
<title> DMA Address Translation and Control via the TCE
|
|
Mechanism</title>
|
|
<para>This architecture defines a Translation and Control Entry (TCE)
|
|
mechanism for translating and controlling DMA addresses. There are several
|
|
reasons for doing such translations, including:</para>
|
|
|
|
<itemizedlist>
|
|
<listitem>
|
|
<para>To provide a mechanism for increasing the number of addressing
|
|
bits for some IOAs. For example, IOAs which are only capable of accessing up to
|
|
4 GB via DMA need a way to access above that limit when used in 64-bit
|
|
addressing systems and the addressing requirements go beyond 4 GB. </para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>To provide a redirection mechanism. A redirection mechanism is
|
|
needed, even for 64-bit addressing capable IOAs, in order to provide the
|
|
protection and indirection benefits provided by such a translation.</para>
|
|
</listitem>
|
|
</itemizedlist>
|
|
|
|
<para>The description of how the access to the TCE table occurs, for the
|
|
translation of a 32-bit address and using a 4 KB I/O page size, follows. The
|
|
most significant 20 bits of the address (for example, AD[31:12], for PCI) is
|
|
used as an offset into the TCE table for the PE to select the TCE. Thus, the
|
|
first TCE maps the addresses BTTAn to BTTAn + 0x00000FFF of the Memory Space of
|
|
the I/O bus; the second entry controls translation of addresses BTTAn +
|
|
0x00001000 to BTTAn + 0x00001FFF, and so on. The translated real system address
|
|
is generated as follows. The Real Page Number (RPN) from the TCE replaces the
|
|
20 most significant bits of the address from the I/O bus. The least significant
|
|
12 bits from the I/O bus address are used as-is for the least significant 12
|
|
bits of the new address.</para>
|
|
<para>Thus, the TCE table entries have a one-to-one correspondence with
|
|
the first n pages of the Memory Space of the I/O bus starting at BTTAn that
|
|
corresponds to the TCE table. The size of the Memory address space of the I/O
|
|
bus that can be mapped to the system address space for a particular HB depends
|
|
on how much System Memory is allocated to the TCE table(s) and on how much
|
|
mappable I/O bus Memory Space is unavailable due to IOAs which are mapped
|
|
there. </para>
|
|
<para>Each TCE also contains two control bits. These are used to identify
|
|
whether that page is mapped to the system address space, and if the page is
|
|
mapped, whether it is mapped read/write, read only, or write only. See the
|
|
<xref linkend="dbdoclet.50569328_91476"/> for a definition of these control
|
|
bits. </para>
|
|
<para>The TCE table is the analogue of the system translation tables.
|
|
However, unlike the system translation tables, the dynamic page faulting of
|
|
memory during an I/O operation is not required (the page fault value, 0b00, in
|
|
the TCE Page Mapping and Control field is used for error detection; that is,
|
|
access to an invalid TCE by the I/O creates an error indication to the
|
|
software).</para>
|
|
<para>The size and location of the HB’s TCE table is set up and
|
|
changed only by the firmware. </para>
|
|
|
|
<variablelist>
|
|
<varlistentry>
|
|
<term><emphasis role="bold">R2-<xref linkend="dbdoclet.50569328_76588"
|
|
xrefstyle="select: labelnumber nopage"/>-1.</emphasis></term>
|
|
<listitem>
|
|
<para>The platform must provide the
|
|
<emphasis role="bold"><literal>“64-bit-addressing”</literal></emphasis> and
|
|
<emphasis role="bold"><literal>“ibm,extended-address”</literal></emphasis> OF properties in all HB nodes
|
|
of the device tree and the <emphasis role="bold"><literal>“ibm,extended-address”</literal></emphasis>
|
|
OF property in the <emphasis role="bold"><literal>root</literal></emphasis> node of the OF device tree.</para>
|
|
</listitem>
|
|
</varlistentry>
|
|
|
|
<varlistentry>
|
|
<term><emphasis role="bold">R2-<xref linkend="dbdoclet.50569328_76588"
|
|
xrefstyle="select: labelnumber nopage"/>-2.</emphasis></term>
|
|
<listitem>
|
|
<para>The bits of the TCE must be implemented
|
|
as defined in <xref linkend="dbdoclet.50569328_91476"/>.</para>
|
|
</listitem>
|
|
</varlistentry>
|
|
</variablelist>
|
|
|
|
<table frame="all" pgwide="1" xml:id="dbdoclet.50569328_91476">
|
|
<?dbhtml table-width="75%" ?><?dbfo table-width="75%" ?>
|
|
<title>TCE Definition </title>
|
|
<tgroup cols="2">
|
|
<colspec colname="c1" colwidth="10*" align="center"/>
|
|
<colspec colname="c2" colwidth="90*"/>
|
|
<thead valign="middle">
|
|
<row>
|
|
<entry>
|
|
<para>
|
|
<emphasis role="bold">Bits</emphasis>
|
|
</para>
|
|
</entry>
|
|
<entry align="center">
|
|
<para>
|
|
<emphasis role="bold">Description</emphasis>
|
|
</para>
|
|
</entry>
|
|
</row>
|
|
</thead>
|
|
<tbody valign="middle">
|
|
<row>
|
|
<entry>
|
|
<para> 0 to 51</para>
|
|
</entry>
|
|
<entry>
|
|
<para> RPN: If the page mapping and control field of the TCE
|
|
indicate anything other than page fault, then these bits contain the Real Page
|
|
Number (RPN) to which the bus address is mapped in the system address space. In
|
|
certain HB implementations, all of these bits may not be required, however
|
|
enough bits must be implemented to match the largest real address in the
|
|
platform.</para>
|
|
</entry>
|
|
</row>
|
|
<row>
|
|
<entry>
|
|
<para> 52 to 61</para>
|
|
</entry>
|
|
<entry>
|
|
<para> Reserved for future use.</para>
|
|
</entry>
|
|
</row>
|
|
<row>
|
|
<entry>
|
|
<para> 62 to 63</para>
|
|
</entry>
|
|
<entry>
|
|
<para> Page Mapping and Control: These bits define page mapping
|
|
and read-write authority. They are coded as follows:</para>
|
|
<para> 00 Page fault (no access)</para>
|
|
<para> 01 System address space (read only)</para>
|
|
<para> 10 System address space (write only)</para>
|
|
<para> 11 System address space (read/write)</para>
|
|
<para> Code point 0b00 signifies that the page is not mapped.
|
|
It must be used to indicate a page fault error. Hardware must not change its
|
|
state based on the value in the remaining bits of a TCE when code point 0b00 is
|
|
set in this field of the TCE.</para>
|
|
<para> For accesses to system address space with an invalid
|
|
operation (write to a read-only page or read to a write-only page), the HB
|
|
generates an error. See <xref linkend="dbdoclet.50569337_52952"/> for more information
|
|
about error handling.</para>
|
|
</entry>
|
|
</row>
|
|
</tbody>
|
|
</tgroup>
|
|
</table>
|
|
|
|
<variablelist>
|
|
<varlistentry>
|
|
<term><emphasis role="bold">R2-<xref linkend="dbdoclet.50569328_76588"
|
|
xrefstyle="select: labelnumber nopage"/>-3.</emphasis></term>
|
|
<listitem>
|
|
<para>If the address that the HB would use to
|
|
access the TCE table (in order to get the TCE) would access outside of the TCE
|
|
table, then the HB must create a TCE extent error (See <xref
|
|
linkend="dbdoclet.50569337_52952"/>).</para>
|
|
</listitem>
|
|
</varlistentry>
|
|
|
|
<varlistentry>
|
|
<term><emphasis role="bold">R2-<xref linkend="dbdoclet.50569328_76588"
|
|
xrefstyle="select: labelnumber nopage"/>-4.</emphasis></term>
|
|
<listitem>
|
|
<para>Enough bits must be implemented in the
|
|
TCE so that DMA IOAs are able to access all System Memory addresses.</para>
|
|
</listitem>
|
|
</varlistentry>
|
|
|
|
<varlistentry>
|
|
<term><emphasis role="bold">R2-<xref linkend="dbdoclet.50569328_76588"
|
|
xrefstyle="select: labelnumber nopage"/>-5.</emphasis></term>
|
|
<listitem>
|
|
<para>Each PE must have its own independent
|
|
TCE table.</para>
|
|
</listitem>
|
|
</varlistentry>
|
|
|
|
<varlistentry>
|
|
<term><emphasis role="bold">R2-<xref linkend="dbdoclet.50569328_76588"
|
|
xrefstyle="select: labelnumber nopage"/>-6.</emphasis></term>
|
|
<listitem>
|
|
<para>Any non-recoverable error while an HB
|
|
is accessing its TCE table must result in a TCE access error; the action to be
|
|
taken by the HB being defined under the TCE access error in <xref linkend="dbdoclet.50569337_52952"/>.</para>
|
|
</listitem>
|
|
</varlistentry>
|
|
|
|
<varlistentry>
|
|
<term><emphasis role="bold">R2-<xref linkend="dbdoclet.50569328_76588"
|
|
xrefstyle="select: labelnumber nopage"/>-7.</emphasis></term>
|
|
<listitem>
|
|
<para>In implementations which cache TCEs, if
|
|
software changes a TCE, then the platform must perform the following steps:
|
|
First, if any data associated with the page represented by that TCE is in an
|
|
I/O bridge cache or buffer, the hardware must write the data, if modified, to
|
|
System Memory. Secondly, it must invalidate the data in the cache. Finally, it
|
|
must invalidate the TCE in the cache. </para>
|
|
</listitem>
|
|
</varlistentry>
|
|
|
|
<varlistentry>
|
|
<term><emphasis role="bold">R2-<xref linkend="dbdoclet.50569328_76588"
|
|
xrefstyle="select: labelnumber nopage"/>-8.</emphasis></term>
|
|
<listitem>
|
|
<para>Neither an IOA nor an HB must ever
|
|
modify a TCE.</para>
|
|
</listitem>
|
|
</varlistentry>
|
|
|
|
<varlistentry>
|
|
<term><emphasis role="bold">R2-<xref linkend="dbdoclet.50569328_76588"
|
|
xrefstyle="select: labelnumber nopage"/>-9.</emphasis></term>
|
|
<listitem>
|
|
<para>If the page mapping and control bits in
|
|
the TCE are set to 0b00, the hardware must not change its state based on the
|
|
values of the remaining bits of the TCE.</para>
|
|
</listitem>
|
|
</varlistentry>
|
|
|
|
<varlistentry>
|
|
<term><emphasis role="bold">R2-<xref linkend="dbdoclet.50569328_76588"
|
|
xrefstyle="select: labelnumber nopage"/>-10.</emphasis></term>
|
|
<listitem>
|
|
<para>The OS must initialize all its TCEs
|
|
upon receiving control from the platform.</para>
|
|
</listitem>
|
|
</varlistentry>
|
|
</variablelist>
|
|
</section>
|
|
</section>
|
|
|
|
<section xml:id="dbdoclet.50569328_70508">
|
|
<title> Example Address Maps</title>
|
|
<para><xref linkend="dbdoclet.50569328_42040"/> shows how to construct a
|
|
simple address map with one PHB and with Peripheral Memory, Peripheral I/O, and
|
|
SCA spaces below 4 GB. </para>
|
|
<para><xref linkend="dbdoclet.50569328_17694"/> shows how to construct
|
|
the address map with Peripheral Memory, Peripheral I/O, and SCA spaces above 4
|
|
GB. This configuration allows some overlap of the System Memory space and
|
|
32-bit I/O bus memory space (with the resulting loss of the TCE table in the
|
|
overlap), while moving some of the SCA spaces above 4 GB. Several things can be
|
|
noted from this configuration:</para>
|
|
|
|
<itemizedlist>
|
|
<listitem>
|
|
<para>I/O bus memory areas can overlap System Memory addresses (see
|
|
memory space of PHB0). However, significant overlap of these I/O bus memory
|
|
areas and the TCE table may significantly reduce the amount of TCE table space
|
|
that is available for mapping I/O memory space to system address space (a
|
|
potential performance impact).</para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>The System Memory which is above 4GB is shown starting at 4GB.
|
|
This architecture also allows this to be pushed further up, with Peripheral
|
|
Memory, Peripheral I/O, and SCAs existing above 4 GB and below the System
|
|
Memory areas. </para>
|
|
</listitem>
|
|
|
|
<listitem>
|
|
<para>BPM’n,m to TPM’n,m spaces for different PHBs
|
|
(different “n”) are allowed to occur at the same memory addresses
|
|
in the various memory spaces of different I/O buses, but are not required to do
|
|
so (and are not shown as the same in the figure). Implementations are likely
|
|
have BPM’n,m to TPM’n,m at the same address range for all
|
|
“n” when the BPM’n,m to TPM’n,m ranges are below 4
|
|
GB.</para>
|
|
</listitem>
|
|
</itemizedlist>
|
|
|
|
<figure xml:id="dbdoclet.50569328_42040">
|
|
<title>Example Address Map: One PHB, Peripheral Memory and Peripheral
|
|
I/O Spaces below 4 GB</title>
|
|
<mediaobject>
|
|
<imageobject role="html">
|
|
<imagedata fileref="figures/PAPR-10.gif" format="GIF" scalefit="1"/>
|
|
</imageobject>
|
|
<imageobject role="fo">
|
|
<imagedata contentdepth="100%" fileref="figures/PAPR-10.gif" format="GIF" scalefit="1" width="100%"/>
|
|
</imageobject>
|
|
</mediaobject>
|
|
</figure>
|
|
|
|
<figure xml:id="dbdoclet.50569328_17694">
|
|
<title>Example Address Map: Four PHBs, all Peripheral Memory and
|
|
Peripheral I/O Spaces above 4GB</title>
|
|
<mediaobject>
|
|
<imageobject role="html">
|
|
<imagedata fileref="figures/PAPR-11.gif" format="GIF" scalefit="1"/>
|
|
</imageobject>
|
|
<imageobject role="fo">
|
|
<imagedata contentdepth="100%" fileref="figures/PAPR-11.gif" format="GIF" scalefit="1" width="100%"/>
|
|
</imageobject>
|
|
</mediaobject>
|
|
</figure>
|
|
</section>
|
|
</section>
|
|
</chapter>
|