You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Linux-Architecture-Reference/LoPAR/pom.xml

164 lines
9.1 KiB
XML

<?xml version="1.0" encoding="UTF-8"?>
<!--
Copyright (c) 2016, 2020 OpenPOWER Foundation
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
-->
<project xmlns="http://maven.apache.org/POM/4.0.0"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/maven-v4_0_0.xsd">
<parent>
<groupId>org.openpowerfoundation.docs</groupId>
<artifactId>workgroup-pom</artifactId>
<version>1.0.0-SNAPSHOT</version>
<relativePath>../pom.xml</relativePath>
</parent>
<modelVersion>4.0.0</modelVersion>
<!-- TODO: Rename the artifactID field to some appropriate for your new document -->
<artifactId>LoPAR-Platform</artifactId>
<packaging>jar</packaging>
<!-- TODO: Rename the name field to some appropriate for your new document -->
<name>LoPAR</name>
<properties>
<!-- This is set by Jenkins according to the branch. -->
<release.path.name></release.path.name>
<comments.enabled>0</comments.enabled>
</properties>
<!-- ################################################ -->
<!-- USE "mvn clean generate-sources" to run this POM -->
<!-- ################################################ -->
<build>
<plugins>
<plugin>
<groupId>org.openpowerfoundation.docs</groupId>
<artifactId>openpowerdocs-maven-plugin</artifactId>
<!-- version set in ../pom.xml -->
<executions>
<execution>
<id>generate-webhelp</id>
<goals>
<goal>generate-webhelp</goal>
</goals>
<phase>generate-sources</phase>
<configuration>
<!-- These parameters only apply to webhelp -->
<enableDisqus>${comments.enabled}</enableDisqus>
<disqusShortname>LoPAR-Platform</disqusShortname>
<enableGoogleAnalytics>1</enableGoogleAnalytics>
<googleAnalyticsId>UA-17511903-1</googleAnalyticsId>
<generateToc>
appendix toc,title
article/appendix nop
article toc,title
book toc,title,figure,table,example,equation
book/appendix nop
book/chapter nop
chapter toc,title
chapter/section nop
section toc
part toc,title
qandadiv toc
qandaset toc
reference toc,title
set toc,title
</generateToc>
<!-- The following elements sets the autonumbering of sections in output for chapter numbers but no numbered sections-->
<sectionAutolabel>1</sectionAutolabel>
<tocSectionDepth>3</tocSectionDepth>
<sectionLabelIncludesComponentLabel>1</sectionLabelIncludesComponentLabel>
<!-- TODO: Rename the webhelpDirname field to the new directory for new document -->
<webhelpDirname>LoPAR</webhelpDirname>
<!-- TODO: Rename the pdfFilenameBase field to the PDF name for new document -->
<pdfFilenameBase>LoPAR</pdfFilenameBase>
<!-- TODO: Define the appropriate work product type. These values are defined by the IPR Policy.
Consult with the Work Group Chair or a Technical Steering Committee member if you have
questions about which value to select.
If no value is provided below, the document will default to "Work Group Notes".-->
<workProduct>workgroupNotes</workProduct>
<!-- workProduct>workgroupSpecification</workProduct -->
<!-- workProduct>candidateStandard</workProduct -->
<!-- workProduct>openpowerStandard</workProduct -->
<!-- TODO: Set the appropriate security policy for the document. For documents
which are not "public" this will affect the document title page and
create a vertical running ribbon on the internal margin of the
security status in all CAPS. Values and definitions are formally
defined by the IPR policy. A layman's definition follows:
public = this document may be shared outside the
foundation and thus this setting must be
used only when completely sure it allowed
foundationConfidential = this document may be shared freely with
OpenPOWER Foundation members but may not be
shared publicly
workgroupConfidential = this document may only be shared within the
work group and should not be shared with
other Foundation members or the public
The appropriate starting security for a new document is "workgroupConfidential". -->
<security>workgroupConfidential</security>
<!-- security>foundationConfidential</security -->
<!-- security>public</security -->
<!-- TODO: Set the appropriate work flow status for the document. For documents
which are not "published" this will affect the document title page
and create a vertical running ribbon on the internal margin of the
security status in all CAPS. Values and definitions are formally
defined by the IPR policy. A layman's definition follows:
published = this document has completed all reviews and has
been published
draft = this document is actively being updated and has
not yet been reviewed
review = this document is presently being reviewed
The appropriate starting security for a new document is "draft". -->
<!-- documentStatus>draft</documentStatus -->
<documentStatus>review</documentStatus>
<!-- documentStatus>publish</documentStatus -->
</configuration>
</execution>
</executions>
<configuration>
<!-- These parameters apply to pdf and webhelp -->
<xincludeSupported>true</xincludeSupported>
<sourceDirectory>.</sourceDirectory>
<includes>
<!-- TODO: If you desire, you may change the following filename to something more appropriate for the new document -->
bk_main.xml
</includes>
<!-- **TODO: Set to the correct project URL. This likely needs input from the TSC. -->
<!-- canonicalUrlBase>http://openpowerfoundation.org/docs/template-guide/content</canonicalUrlBase -->
<glossaryCollection>${basedir}/../glossary/glossary-terms.xml</glossaryCollection>
<includeCoverLogo>1</includeCoverLogo>
<coverUrl>www.openpowerfoundation.org</coverUrl>
</configuration>
</plugin>
</plugins>
</build>
</project>