You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Linux-Architecture-Reference/Virtualization/ch_platform_hcalls.xml

618 lines
24 KiB
XML

<chapter xmlns="http://docbook.org/ns/docbook"
xmlns:xl="http://www.w3.org/1999/xlink" version="5.0" xml:lang="en" xml:id="dbdoclet.50569383_58396">
<title>Platform Dependent hcall()s</title>
<para>This chapter defines the set of hypervisor calls (hcall()s) that are
platform dependent. The existence and/or implementation of the hcall() can
vary between firmware releases and between hardware platforms.</para>
<section>
<title>hcall()s Supported by Firmware Release &amp; Hardware
Platform</title>
<para>
<xref linkend="dbdoclet.50569383_56867" /> is a list of platform specific
hcall()s, which will be described in this chapter.</para>
<table frame="all" pgwide="1" xml:id="dbdoclet.50569383_56867">
<title>Platform Dependent hcall()s Supported by Release and
Hardware Platform</title>
<tgroup cols="4">
<colspec colname="c1" colwidth="40*" align="center" />
<colspec colname="c2" colwidth="20*" align="center" />
<colspec colname="c3" colwidth="20*" align="center" />
<colspec colname="c4" colwidth="20*" align="center" />
<thead>
<row>
<entry>
<para><emphasis role="bold">Function Name/Section</emphasis></para>
</entry>
<entry>
<para><emphasis role="bold">Hypervisor Call Function Token</emphasis></para>
</entry>
<entry>
<para><emphasis role="bold">Firmware Releases Supported</emphasis></para>
</entry>
<entry>
<para><emphasis role="bold">Hardware Platform Supported</emphasis></para>
</entry>
</row>
</thead>
<tbody valign="middle">
<row>
<entry>
<para>Reserved</para>
</entry>
<entry>
<para>0xF000-0xF07C</para>
</entry>
<entry>
<para>&#160;</para>
</entry>
<entry>
<para>&#160;</para>
</entry>
</row>
<row>
<entry>
<para>H_GetPerformanceCounterInfo /
<xref linkend="dbdoclet.50569383_65658" xrefstyle="select: labelnumber" /></para>
</entry>
<entry>
<para>0xF080</para>
</entry>
<entry>
<para>eFW 3.5 and later</para>
</entry>
<entry>
<para>Power 6 and later</para>
</entry>
</row>
</tbody>
</tgroup>
</table>
</section>
<section>
<title>Supported hcall()s</title>
<section xml:id="dbdoclet.50569383_65658">
<title>H_GetPerformanceCounterInfo (0xF080)</title>
<para>This call returns information about the performance of selectable
performance counters maintained by the hardware or from data collected by
the Hypervisor.</para>
<simplesect>
<title>Syntax:</title>
<programlisting><![CDATA[int64 /* H_Success, H_Privilege, H_Authority */
/* H_Hardware, H_Not_Available */
hcall ( const uint64 H_GetPerformanceCounterInfo /* Retrieve performance info */
uint64 size, /* Size of getPerformanceCounterInfoParms */
getPerformanceCounterInfoParms* ); /* Requested/Response data */]]></programlisting>
</simplesect>
<simplesect>
<title>Parameters:</title>
<itemizedlist>
<listitem>
<para>size &#8211; size of the getPerformanceCounterInfoParms</para>
</listitem>
<listitem>
<para>getPerformanceCounterInfoParms &#8211; parameter list indicating
which performance counter information to retrieve.
<xref linkend="dbdoclet.50569383_34010" /></para>
</listitem>
</itemizedlist>
</simplesect>
<simplesect>
<title>Semantics:</title>
<itemizedlist>
<listitem>
<para>Validate the getPerformanceInfoParms is accessible, else
H_Privilege.</para>
</listitem>
<listitem>
<para>Validate the size and contents of getPerformanceCounterInfoParms,
else H_Parameter.</para>
</listitem>
<listitem>
<para>Validate information is available for the firmware level and
platform, else H_Not_Available.</para>
</listitem>
<listitem>
<para>Validate partition is permitted to retrieve performance
information, else H_Authority.</para>
</listitem>
<listitem>
<para>Copy requested performance counters into getPerformanceInfoParms
and return H_Success.</para>
</listitem>
</itemizedlist>
<table frame="all" pgwide="1" xml:id="dbdoclet.50569383_34010">
<title>Performance_Counter_Info_Parms struct</title>
<tgroup cols="4">
<colspec colname="c1" colwidth="25*" />
<colspec colname="c2" colwidth="15*" align="center" />
<colspec colname="c3" colwidth="15*" align="center" />
<colspec colname="c4" colwidth="45*" align="center" />
<thead>
<row>
<entry align="center">
<para><emphasis role="bold">Member Name</emphasis></para>
</entry>
<entry>
<para><emphasis role="bold">Member Type</emphasis></para>
</entry>
<entry>
<para><emphasis role="bold">IN/OUT</emphasis></para>
</entry>
<entry align="center">
<para><emphasis role="bold">Description</emphasis></para>
</entry>
</row>
</thead>
<tbody valign="middle">
<row>
<entry>
<para>Requested_Information</para>
</entry>
<entry>
<para>uint_32</para>
</entry>
<entry>
<para>INPUT</para>
</entry>
<entry>
<para>See
<xref linkend="dbdoclet.50569383_64760" /></para>
</entry>
</row>
<row>
<entry>
<para>starting_index</para>
</entry>
<entry>
<para>int_32</para>
</entry>
<entry>
<para>BOTH</para>
</entry>
<entry>
<para>At input, the partition id of the first
processor/partition to retrieve performance metrics. If -1 is
specified for this parameter, only information for the current
processor/partition is returned.</para>
<para>At output, the actual first processor/partition id that
was found.</para>
</entry>
</row>
<row>
<entry>
<para>returned_values</para>
</entry>
<entry>
<para>uint_32</para>
</entry>
<entry>
<para>OUTPUT</para>
</entry>
<entry>
<para>Number of lists of counters returned</para>
</entry>
</row>
<row>
<entry>
<para>reserved</para>
</entry>
<entry>
<para>uint_32</para>
</entry>
<entry>
<para>N/A</para>
</entry>
<entry>
<para>Alignment</para>
</entry>
</row>
<row>
<entry>
<para>reserved</para>
</entry>
<entry>
<para>uint_64[2]</para>
</entry>
<entry>
<para>N/A</para>
</entry>
<entry>
<para>Alignment</para>
</entry>
</row>
<row>
<entry>
<para>counter_value</para>
</entry>
<entry>
<para>perf_data</para>
</entry>
<entry>
<para>BOTH</para>
</entry>
<entry>
<para>Array of counters values</para>
</entry>
</row>
</tbody>
</tgroup>
</table>
<para>The possible values for Requested_Information are as shown in
<xref linkend="dbdoclet.50569383_64760" />.</para>
<table frame="all" pgwide="1" xml:id="dbdoclet.50569383_64760">
<title>Performance Counter Info Requested_Information
Values</title>
<tgroup cols="3">
<colspec colname="c1" colwidth="30*" />
<colspec colname="c2" colwidth="15*" align="center" />
<colspec colname="c3" colwidth="55*" />
<thead>
<row>
<entry align="center">
<para>
<emphasis role="bold">Name</emphasis>
</para>
</entry>
<entry>
<para>
<emphasis role="bold">Value</emphasis>
</para>
</entry>
<entry align="center">
<para>
<emphasis role="bold">Description</emphasis>
</para>
</entry>
</row>
</thead>
<tbody valign="middle">
<row>
<entry>
<para>Dispatch_PURR_by_processor</para>
</entry>
<entry>
<para>0x0000 0010</para>
</entry>
<entry>
<para>The value for the counter_value is a list of values per
physical processor as follows:</para>
<itemizedlist>
<listitem>
<para>uint64 processor time (in PURR cycles) that the processor
was running work on behalf of partitions since the boot of the
CEC</para>
</listitem>
<listitem>
<para>uint32 hardware processor id</para>
</listitem>
<listitem>
<para>uint16 owning partition id (0xFFFF is shared or
unowned)</para>
</listitem>
<listitem>
<para>uint8 processor state (0x01-Not Installed, 0x02-Guarded
Off, 0x03-Unlicensed, 0x04-Shared, 0x05-Borrowed,
0x06-Dedicated)</para>
</listitem>
<listitem>
<para>uint8[1] reserved</para>
</listitem>
<listitem>
<para>uint32 hardware chip id (a value of -1 will be returned
for Not Installed processors)</para>
</listitem>
<listitem>
<para>uint32 hardware module id</para>
</listitem>
<listitem>
<para>uint32 primary affinity domain</para>
</listitem>
<listitem>
<para>uint32 secondary affinity domain</para>
</listitem>
<listitem>
<para>uint32 processor version (a value of -1 will be returned
for Not Installed processors)</para>
</listitem>
<listitem>
<para>uint16 logical processor index</para>
</listitem>
<listitem>
<para>uint8[10] reserved</para>
</listitem>
</itemizedlist>
</entry>
</row>
<row>
<entry>
<para>Entitled_capped<?linebreak?>
_uncapped_donated<?linebreak?>
_idle_PURR<?linebreak?>
_by_partition</para>
</entry>
<entry>
<para>0x0000 0020</para>
</entry>
<entry>
<para>The value for the counter_value is a list of uint64
values as follows:</para>
<para>Partition id</para>
<itemizedlist>
<listitem>
<para>Hypervisor collected PURR cycles that the partition was
entitled to consume since the boot of the CEC (or partition
creation).</para>
</listitem>
<listitem>
<para>Hypervisor collected PURR cycles that the partition
consumed as capped cycles since boot of the CEC (or partition
creation). For a dedicated partition, all cycles consumed will
be reported as capped cycles. For shared, these are the capped
(entitled) cycles consumed by the partition.</para>
</listitem>
<listitem>
<para>Hypervisor collected PURR cycles that the partition
consumed as uncapped shared partition cycles since boot of the
CEC (or partition creation).</para>
</listitem>
<listitem>
<para>Hypervisor collected PURR cycles that were donated from a
dedicated partition to uncapped partitions since boot of the
CEC (or partition creation).</para>
</listitem>
<listitem>
<para>Partition collected PURR cycles that the partition
considers as idle cycles. These cycles can be subtracted from
the total cycles consumed to calculate the partition&#8217;s
view of utilization. Note that not all operating system
versions will report this value.</para>
</listitem>
</itemizedlist>
</entry>
</row>
<row>
<entry>
<para>Run_instructions<?linebreak?>
_run_cycles<?linebreak?>
_by_partition</para>
</entry>
<entry>
<para>0x0000 0030</para>
</entry>
<entry>
<para>The value for the counter_value is a list of uint64
values as follows:</para>
<itemizedlist>
<listitem>
<para>Partition id</para>
</listitem>
<listitem>
<para>Hypervisor collected instructions completed while the run
latch is set since boot of the CEC (or partition creation).
Note that this value will be zero on processors versions that
do not provide the ability to collect this information.</para>
</listitem>
<listitem>
<para>Hypervisor collected cycles while the run latch is set
since boot of the CEC (or partition creation). Note that this
value will be zero on processors versions that do not provide
the ability to collect this information.</para>
</listitem>
</itemizedlist>
</entry>
</row>
<row>
<entry>
<para>System_performance<?linebreak?>
_capabilities</para>
</entry>
<entry>
<para>0x00000040</para>
</entry>
<entry>
<para>The value for the counter_value is a list of values for
the requesting partition as follows:</para>
<itemizedlist>
<listitem>
<para>uint8 Is partition allowed to get performance data for
other partitions (boolean).</para>
</listitem>
<listitem>
<para>uint8[15] Reserved</para>
</listitem>
<listitem>
<para><emphasis role="bold">Note:</emphasis> This request can only be issued by a partition to
obtain data about itself (i.e. starting_index must always be
-1) H_NOT_AVAILABLE will be returned otherwise.</para>
</listitem>
</itemizedlist>
</entry>
</row>
<row>
<entry>
<para>Processor_bus_utilization_ABC<?linebreak?>
_links</para>
</entry>
<entry>
<para>0x00000050</para>
</entry>
<entry>
<para>The value for the counter_value is a list of values per
physical chip as follows:</para>
<itemizedlist>
<listitem>
<para>uint32 hardware chip id</para>
</listitem>
<listitem>
<para>uint32[3] RESERVED</para>
</listitem>
<listitem>
<para>uint64 idle cycles for A link</para>
</listitem>
<listitem>
<para>uint64 time value (in cycles) data for A link was
collected</para>
</listitem>
<listitem>
<para>uint64 idle cycles for B link</para>
</listitem>
<listitem>
<para>uint64 time value (in cycles) data for B link was
collected</para>
</listitem>
<listitem>
<para>uint64 idle cycles for C link</para>
</listitem>
<listitem>
<para>uint64 time value (in cycles) data for C link was
collected</para>
</listitem>
</itemizedlist>
</entry>
</row>
<row>
<entry>
<para>Processor_bus_utilization_WXYZ<?linebreak?>
_links</para>
</entry>
<entry>
<para>0x00000060</para>
</entry>
<entry>
<para>The value for the counter_value is a list of values per
physical chip as follows:</para>
<itemizedlist>
<listitem>
<para>uint32 hardware chip id</para>
</listitem>
<listitem>
<para>uint32[3] RESERVED</para>
</listitem>
<listitem>
<para>uint64 idle cycles for W link</para>
</listitem>
<listitem>
<para>uint64 time value (in cycles) data for W link was
collected</para>
</listitem>
<listitem>
<para>uint64 idle cycles for X link</para>
</listitem>
<listitem>
<para>uint64 time value (in cycles) data for X link was
collected</para>
</listitem>
<listitem>
<para>uint64 idle cycles for Y link</para>
</listitem>
<listitem>
<para>uint64 time value (in cycles) data for Y link was
collected</para>
</listitem>
<listitem>
<para>uint64 idle cycles for Z link</para>
</listitem>
<listitem>
<para>uint64 time value (in cycles) data for Z link was
collected</para>
</listitem>
</itemizedlist>
</entry>
</row>
<row>
<entry>
<para>Set MMCRH<?linebreak?>
(LAB ONLY)</para>
</entry>
<entry>
<para>0x8000 1000</para>
</entry>
<entry>
<para>At input, counter_value is a single value with what to
set the Performance Monitor Mode Control Register H to:</para>
<itemizedlist>
<listitem>
<para>uint64 value to set MMCRH to in all processors</para>
</listitem>
</itemizedlist>
<para>There will be no output for this function other than
errors.</para>
<para>
<emphasis role="bold">Note 1:</emphasis> A passed value of (-1) will mean
that collection of these values should be disabled.</para>
<para>
<emphasis role="bole">Note 2:</emphasis> Whenever this value is changed, the
programmable counters (HPMC1 &amp; HPMC2) will be reset in the
next collection cycle.</para>
</entry>
</row>
<row>
<entry>
<para>Retrieve HPMCx<?linebreak?>
(LAB ONLY)</para>
</entry>
<entry>
<para>0x8000 2000</para>
</entry>
<entry>
<para>The value for the counter_value is a list of values per
physical processor as follows:</para>
<itemizedlist>
<listitem>
<para>uint32 hardware processor id</para>
</listitem>
<listitem>
<para>uint32 reserved</para>
</listitem>
<listitem>
<para>uint64 current value of MMCRH for this processor</para>
</listitem>
<listitem>
<para>uint64 elapsed timebase value in cycles since current
MMCRH was set</para>
</listitem>
<listitem>
<para>uint64 value for HPMC1 since current MMCRH was set</para>
</listitem>
<listitem>
<para>uint64 value for HPMC2 since current MMCRH was set</para>
</listitem>
<listitem>
<para>uint64 value for HPMC3 since current MMCRH was set</para>
</listitem>
<listitem>
<para>uint64 current value for HPMC3</para>
</listitem>
<listitem>
<para>uint64 value for HPMC4 since current MMCRH was set</para>
</listitem>
<listitem>
<para>uint64 current value for HPMC4</para>
</listitem>
</itemizedlist>
</entry>
</row>
</tbody>
</tgroup>
</table>
</simplesect>
</section>
</section>
</chapter>