You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

695 lines
32 KiB
Verilog

2 years ago
// © IBM Corp. 2020
// Licensed under the Apache License, Version 2.0 (the "License"), as modified by
// the terms below; you may not use the files in this repository except in
// compliance with the License as modified.
// You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0
//
// Modified Terms:
//
// 1) For the purpose of the patent license granted to you in Section 3 of the
// License, the "Work" hereby includes implementations of the work of authorship
// in physical form.
//
// 2) Notwithstanding any terms to the contrary in the License, any licenses
// necessary for implementation of the Work that are available from OpenPOWER
// via the Power ISA End User License Agreement (EULA) are explicitly excluded
// hereunder, and may be obtained from OpenPOWER under the terms and conditions
// of the EULA.
//
// Unless required by applicable law or agreed to in writing, the reference design
// distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
// WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
// for the specific language governing permissions and limitations under the License.
//
// Additional rights, including the ability to physically implement a softcore that
// is compliant with the required sections of the Power ISA Specification, are
// available at no cost under the terms of the OpenPOWER Power ISA EULA, which can be
// obtained (along with the Power ISA) here: https://openpowerfoundation.org.
`timescale 1 ns / 1 ns
module fu_tblexp(
vdd,
gnd,
clkoff_b,
act_dis,
flush,
delay_lclkr,
mpw1_b,
mpw2_b,
sg_1,
thold_1,
fpu_enable,
nclk,
si,
so,
ex2_act_b,
f_pic_ex3_ue1,
f_pic_ex3_sp_b,
f_pic_ex3_est_recip,
f_pic_ex3_est_rsqrt,
f_eie_ex3_tbl_expo,
f_fmt_ex3_lu_den_recip,
f_fmt_ex3_lu_den_rsqrto,
f_tbe_ex4_recip_ue1,
f_tbe_ex4_lu_sh,
f_tbe_ex4_match_en_sp,
f_tbe_ex4_match_en_dp,
f_tbe_ex4_recip_2046,
f_tbe_ex4_recip_2045,
f_tbe_ex4_recip_2044,
f_tbe_ex4_may_ov,
f_tbe_ex4_res_expo
);
`include "tri_a2o.vh"
inout vdd;
inout gnd;
input clkoff_b; // tiup
input act_dis; // ??tidn??
input flush; // ??tidn??
input [2:3] delay_lclkr; // tidn,
input [2:3] mpw1_b; // tidn,
input [0:0] mpw2_b; // tidn,
input sg_1;
input thold_1;
input fpu_enable; //dc_act
input [0:`NCLK_WIDTH-1] nclk;
input si; // perv
output so; // perv
input ex2_act_b; // act
input f_pic_ex3_ue1;
input f_pic_ex3_sp_b;
input f_pic_ex3_est_recip;
input f_pic_ex3_est_rsqrt;
input [1:13] f_eie_ex3_tbl_expo;
input f_fmt_ex3_lu_den_recip;
input f_fmt_ex3_lu_den_rsqrto;
output f_tbe_ex4_recip_ue1;
output f_tbe_ex4_lu_sh;
output f_tbe_ex4_match_en_sp;
output f_tbe_ex4_match_en_dp;
output f_tbe_ex4_recip_2046;
output f_tbe_ex4_recip_2045;
output f_tbe_ex4_recip_2044;
output f_tbe_ex4_may_ov;
output [1:13] f_tbe_ex4_res_expo; // to rounder
// end ports
// ENTITY
parameter tiup = 1'b1;
parameter tidn = 1'b0;
wire thold_0_b;
wire thold_0;
wire force_t;
wire sg_0;
wire [0:3] act_spare_unused;
wire ex3_act;
wire [0:4] act_so;
wire [0:4] act_si;
wire [0:19] ex4_expo_so;
wire [0:19] ex4_expo_si;
wire [1:13] ex3_res_expo;
wire [1:13] ex4_res_expo;
wire ex4_recip_2044;
wire ex3_recip_2044;
wire ex3_recip_ue1;
wire ex4_recip_2045;
wire ex3_recip_2045;
wire ex4_recip_ue1;
wire ex4_recip_2046;
wire ex3_recip_2046;
wire ex4_force_expo_den;
wire [1:13] ex3_b_expo_adj_b;
wire [1:13] ex3_b_expo_adj;
wire [1:13] ex3_recip_k;
wire [1:13] ex3_recip_p;
wire [2:13] ex3_recip_g;
wire [2:12] ex3_recip_t;
wire [2:13] ex3_recip_c;
wire [1:13] ex3_recip_expo;
wire [1:13] ex3_rsqrt_k;
wire [1:13] ex3_rsqrt_p;
wire [2:13] ex3_rsqrt_g;
wire [2:12] ex3_rsqrt_t;
wire [2:13] ex3_rsqrt_c;
wire [1:13] ex3_rsqrt_expo;
wire [1:13] ex3_rsqrt_bsh_b;
wire [2:13] ex3_recip_g2;
wire [2:11] ex3_recip_t2;
wire [2:13] ex3_recip_g4;
wire [2:9] ex3_recip_t4;
wire [2:13] ex3_recip_g8;
wire [2:5] ex3_recip_t8;
wire [2:13] ex3_rsqrt_g2;
wire [2:11] ex3_rsqrt_t2;
wire [2:13] ex3_rsqrt_g4;
wire [2:9] ex3_rsqrt_t4;
wire [2:13] ex3_rsqrt_g8;
wire [2:5] ex3_rsqrt_t8;
wire ex2_act;
wire ex3_lu_sh;
wire ex4_lu_sh;
wire [2:13] ex4_res_expo_c;
wire [2:13] ex4_res_expo_g8_b;
wire [2:13] ex4_res_expo_g4;
wire [2:13] ex4_res_expo_g2_b;
wire [1:13] ex4_res_decr;
wire [1:13] ex4_res_expo_b;
wire ex4_decr_expo;
wire ex3_mid_match_ifsp;
wire ex3_mid_match_ifdp;
wire ex3_match_en_dp;
wire ex3_match_en_sp;
wire ex4_match_en_dp;
wire ex4_match_en_sp;
wire ex3_com_match;
wire ex4_recip_2044_dp;
wire ex4_recip_2045_dp;
wire ex4_recip_2046_dp;
////############################################
////# pervasive
////############################################
tri_plat thold_reg_0(
.vd(vdd),
.gd(gnd),
.nclk(nclk),
.flush(flush),
.din(thold_1),
.q(thold_0)
);
tri_plat sg_reg_0(
.vd(vdd),
.gd(gnd),
.nclk(nclk),
.flush(flush),
.din(sg_1),
.q(sg_0)
);
tri_lcbor lcbor_0(
.clkoff_b(clkoff_b),
.thold(thold_0),
.sg(sg_0),
.act_dis(act_dis),
.force_t(force_t),
.thold_b(thold_0_b)
);
////############################################
////# ACT LATCHES
////############################################
assign ex2_act = (~ex2_act_b);
tri_rlmreg_p #(.WIDTH(5)) act_lat(
.force_t(force_t), //tidn,
.d_mode(tiup), // => d_mode ,--tiup,
.delay_lclkr(delay_lclkr[2]), //tidn,
.mpw1_b(mpw1_b[2]), //tidn,
.mpw2_b(mpw2_b[0]), //tidn,
.vd(vdd),
.gd(gnd),
.nclk(nclk),
.thold_b(thold_0_b),
.sg(sg_0),
.act(fpu_enable),
.scout(act_so),
.scin(act_si),
//-----------------
.din({ act_spare_unused[0],
act_spare_unused[1],
ex2_act,
act_spare_unused[2],
act_spare_unused[3]}),
//-----------------
.dout({ act_spare_unused[0],
act_spare_unused[1],
ex3_act,
act_spare_unused[2],
act_spare_unused[3]})
);
////##############################################
////# EX3 logic
////##############################################
// 1* 2 3 4 5* 6 7 8 9* 10 11 12 13*
// * * * *
// 0 B01 B02 B03 B04 B05 B06 B07 B08 B09 B10 B11 B12 sqrt_q0
// 0 0 1 1 1 1 1 1 1 1 1 1 0
// * * * *
// !B01 !B02 !B03 !B04 !B05 !B06 !B07 !B08 !B09 !B10 !B11 !B12 !B13 fres
// 0 0 1 1 1 1 1 1 1 1 1 1 0
// * * * *
// 1 !B01 !B02 !B03 !B04 !B05 !B06 !B07 !B08 !B09 !B10 !B11 !B12 rsqrte
// 0 0 1 0 1 1 1 1 1 1 1 1 !B13
// * * * *
//-----------------------------------------------------------------------------
// 1 !B01 !B02 !B03 !B04 !B05 !B06 !B07 !B08 !B09 !B10 !B11 !B12 rsqrte
// 0 0 1 0 1 1 1 1 1 1 1 1 (!c5 +!B13 +<1>)
// 1 1 1 1 1 1 1 1 !c0 !c1 !c2 !c3 !c4
//
// !c5 + !b13 + <1> | or xnor | or+xnor => put into LSB position
//------------------+-----------+--------
// 0 0 | 0 1 | 1+0
// 0 1 | 1 0 | 1+0
// 1 0 | 1 0 | 1+0
// 1 1 | 1 1 | 1+1
////#--------------------------------------------
////# first generate B - clz (upper half should be carry select)
////#----------------------------------------------
////# upper half should be carry select decrementer
assign ex3_b_expo_adj[1:13] = f_eie_ex3_tbl_expo[1:13];
assign ex3_b_expo_adj_b[1:13] = (~ex3_b_expo_adj[1:13]);
////#--------------------------------------------
////# adder for !(B-clz) + K_res
////#--------------------------------------------
// 1 2 3 4 5 6 7 8 9 10 11 12 13
// !B01 !B02 !B03 !B04 !B05 !B06 !B07 !B08 !B09 !B10 !B11 !B12 !B13 fres
// 0 0 1 1 1 1 1 1 1 1 1 1 0
assign ex3_recip_k[1:13] = {{2{tidn}}, {10{tiup}}, tidn};
assign ex3_recip_p[1:13] = ex3_recip_k[1:13] ^ ex3_b_expo_adj_b[1:13];
assign ex3_recip_g[2:13] = ex3_recip_k[2:13] & ex3_b_expo_adj_b[2:13];
assign ex3_recip_t[2:12] = ex3_recip_k[2:12] | ex3_b_expo_adj_b[2:12];
assign ex3_recip_g2[13] = ex3_recip_g[13];
assign ex3_recip_g2[12] = ex3_recip_g[12] | (ex3_recip_t[12] & ex3_recip_g[13]);
assign ex3_recip_g2[11] = ex3_recip_g[11] | (ex3_recip_t[11] & ex3_recip_g[12]);
assign ex3_recip_g2[10] = ex3_recip_g[10] | (ex3_recip_t[10] & ex3_recip_g[11]);
assign ex3_recip_g2[9] = ex3_recip_g[9] | (ex3_recip_t[9] & ex3_recip_g[10]);
assign ex3_recip_g2[8] = ex3_recip_g[8] | (ex3_recip_t[8] & ex3_recip_g[9]);
assign ex3_recip_g2[7] = ex3_recip_g[7] | (ex3_recip_t[7] & ex3_recip_g[8]);
assign ex3_recip_g2[6] = ex3_recip_g[6] | (ex3_recip_t[6] & ex3_recip_g[7]);
assign ex3_recip_g2[5] = ex3_recip_g[5] | (ex3_recip_t[5] & ex3_recip_g[6]);
assign ex3_recip_g2[4] = ex3_recip_g[4] | (ex3_recip_t[4] & ex3_recip_g[5]);
assign ex3_recip_g2[3] = ex3_recip_g[3] | (ex3_recip_t[3] & ex3_recip_g[4]);
assign ex3_recip_g2[2] = ex3_recip_g[2] | (ex3_recip_t[2] & ex3_recip_g[3]);
assign ex3_recip_t2[11] = (ex3_recip_t[11] & ex3_recip_t[12]);
assign ex3_recip_t2[10] = (ex3_recip_t[10] & ex3_recip_t[11]);
assign ex3_recip_t2[9] = (ex3_recip_t[9] & ex3_recip_t[10]);
assign ex3_recip_t2[8] = (ex3_recip_t[8] & ex3_recip_t[9]);
assign ex3_recip_t2[7] = (ex3_recip_t[7] & ex3_recip_t[8]);
assign ex3_recip_t2[6] = (ex3_recip_t[6] & ex3_recip_t[7]);
assign ex3_recip_t2[5] = (ex3_recip_t[5] & ex3_recip_t[6]);
assign ex3_recip_t2[4] = (ex3_recip_t[4] & ex3_recip_t[5]);
assign ex3_recip_t2[3] = (ex3_recip_t[3] & ex3_recip_t[4]);
assign ex3_recip_t2[2] = (ex3_recip_t[2] & ex3_recip_t[3]);
assign ex3_recip_g4[13] = ex3_recip_g2[13];
assign ex3_recip_g4[12] = ex3_recip_g2[12];
assign ex3_recip_g4[11] = ex3_recip_g2[11] | (ex3_recip_t2[11] & ex3_recip_g2[13]);
assign ex3_recip_g4[10] = ex3_recip_g2[10] | (ex3_recip_t2[10] & ex3_recip_g2[12]);
assign ex3_recip_g4[9] = ex3_recip_g2[9] | (ex3_recip_t2[9] & ex3_recip_g2[11]);
assign ex3_recip_g4[8] = ex3_recip_g2[8] | (ex3_recip_t2[8] & ex3_recip_g2[10]);
assign ex3_recip_g4[7] = ex3_recip_g2[7] | (ex3_recip_t2[7] & ex3_recip_g2[9]);
assign ex3_recip_g4[6] = ex3_recip_g2[6] | (ex3_recip_t2[6] & ex3_recip_g2[8]);
assign ex3_recip_g4[5] = ex3_recip_g2[5] | (ex3_recip_t2[5] & ex3_recip_g2[7]);
assign ex3_recip_g4[4] = ex3_recip_g2[4] | (ex3_recip_t2[4] & ex3_recip_g2[6]);
assign ex3_recip_g4[3] = ex3_recip_g2[3] | (ex3_recip_t2[3] & ex3_recip_g2[5]);
assign ex3_recip_g4[2] = ex3_recip_g2[2] | (ex3_recip_t2[2] & ex3_recip_g2[4]);
assign ex3_recip_t4[9] = (ex3_recip_t2[9] & ex3_recip_t2[11]);
assign ex3_recip_t4[8] = (ex3_recip_t2[8] & ex3_recip_t2[10]);
assign ex3_recip_t4[7] = (ex3_recip_t2[7] & ex3_recip_t2[9]);
assign ex3_recip_t4[6] = (ex3_recip_t2[6] & ex3_recip_t2[8]);
assign ex3_recip_t4[5] = (ex3_recip_t2[5] & ex3_recip_t2[7]);
assign ex3_recip_t4[4] = (ex3_recip_t2[4] & ex3_recip_t2[6]);
assign ex3_recip_t4[3] = (ex3_recip_t2[3] & ex3_recip_t2[5]);
assign ex3_recip_t4[2] = (ex3_recip_t2[2] & ex3_recip_t2[4]);
assign ex3_recip_g8[13] = ex3_recip_g4[13];
assign ex3_recip_g8[12] = ex3_recip_g4[12];
assign ex3_recip_g8[11] = ex3_recip_g4[11];
assign ex3_recip_g8[10] = ex3_recip_g4[10];
assign ex3_recip_g8[9] = ex3_recip_g4[9] | (ex3_recip_t4[9] & ex3_recip_g4[13]);
assign ex3_recip_g8[8] = ex3_recip_g4[8] | (ex3_recip_t4[8] & ex3_recip_g4[12]);
assign ex3_recip_g8[7] = ex3_recip_g4[7] | (ex3_recip_t4[7] & ex3_recip_g4[11]);
assign ex3_recip_g8[6] = ex3_recip_g4[6] | (ex3_recip_t4[6] & ex3_recip_g4[10]);
assign ex3_recip_g8[5] = ex3_recip_g4[5] | (ex3_recip_t4[5] & ex3_recip_g4[9]);
assign ex3_recip_g8[4] = ex3_recip_g4[4] | (ex3_recip_t4[4] & ex3_recip_g4[8]);
assign ex3_recip_g8[3] = ex3_recip_g4[3] | (ex3_recip_t4[3] & ex3_recip_g4[7]);
assign ex3_recip_g8[2] = ex3_recip_g4[2] | (ex3_recip_t4[2] & ex3_recip_g4[6]);
assign ex3_recip_t8[5] = (ex3_recip_t4[5] & ex3_recip_t4[9]);
assign ex3_recip_t8[4] = (ex3_recip_t4[4] & ex3_recip_t4[8]);
assign ex3_recip_t8[3] = (ex3_recip_t4[3] & ex3_recip_t4[7]);
assign ex3_recip_t8[2] = (ex3_recip_t4[2] & ex3_recip_t4[6]);
assign ex3_recip_c[13] = ex3_recip_g8[13];
assign ex3_recip_c[12] = ex3_recip_g8[12];
assign ex3_recip_c[11] = ex3_recip_g8[11];
assign ex3_recip_c[10] = ex3_recip_g8[10];
assign ex3_recip_c[9] = ex3_recip_g8[9];
assign ex3_recip_c[8] = ex3_recip_g8[8];
assign ex3_recip_c[7] = ex3_recip_g8[7];
assign ex3_recip_c[6] = ex3_recip_g8[6];
assign ex3_recip_c[5] = ex3_recip_g8[5] | (ex3_recip_t8[5] & ex3_recip_g8[13]);
assign ex3_recip_c[4] = ex3_recip_g8[4] | (ex3_recip_t8[4] & ex3_recip_g8[12]);
assign ex3_recip_c[3] = ex3_recip_g8[3] | (ex3_recip_t8[3] & ex3_recip_g8[11]);
assign ex3_recip_c[2] = ex3_recip_g8[2] | (ex3_recip_t8[2] & ex3_recip_g8[10]);
assign ex3_recip_expo[1:12] = ex3_recip_p[1:12] ^ ex3_recip_c[2:13];
assign ex3_recip_expo[13] = ex3_recip_p[13];
////#--------------------------------------------
////# adder for !(B-clz) + K_rsqrt
////#--------------------------------------------
// 1 2 3 4 5 6 7 8 9 10 11 12 13
// 1 !B01 !B02 !B03 !B04 !B05 !B06 !B07 !B08 !B09 !B10 !B11 !B12 rsqrte
// 0 0 1 0 1 1 1 1 1 1 1 1 !B13
assign ex3_rsqrt_k[1:13] = {tidn, tidn, tiup, tidn, {8{tiup}}, ex3_b_expo_adj_b[13]};
assign ex3_rsqrt_bsh_b[1:13] = {ex3_b_expo_adj_b[1], ex3_b_expo_adj_b[1:12]}; //negative expo in -> positive
assign ex3_rsqrt_p[1:13] = ex3_rsqrt_k[1:13] ^ ex3_rsqrt_bsh_b[1:13];
assign ex3_rsqrt_g[2:13] = ex3_rsqrt_k[2:13] & ex3_rsqrt_bsh_b[2:13];
assign ex3_rsqrt_t[2:12] = ex3_rsqrt_k[2:12] | ex3_rsqrt_bsh_b[2:12];
assign ex3_rsqrt_g2[13] = ex3_rsqrt_g[13];
assign ex3_rsqrt_g2[12] = ex3_rsqrt_g[12] | (ex3_rsqrt_t[12] & ex3_rsqrt_g[13]);
assign ex3_rsqrt_g2[11] = ex3_rsqrt_g[11] | (ex3_rsqrt_t[11] & ex3_rsqrt_g[12]);
assign ex3_rsqrt_g2[10] = ex3_rsqrt_g[10] | (ex3_rsqrt_t[10] & ex3_rsqrt_g[11]);
assign ex3_rsqrt_g2[9] = ex3_rsqrt_g[9] | (ex3_rsqrt_t[9] & ex3_rsqrt_g[10]);
assign ex3_rsqrt_g2[8] = ex3_rsqrt_g[8] | (ex3_rsqrt_t[8] & ex3_rsqrt_g[9]);
assign ex3_rsqrt_g2[7] = ex3_rsqrt_g[7] | (ex3_rsqrt_t[7] & ex3_rsqrt_g[8]);
assign ex3_rsqrt_g2[6] = ex3_rsqrt_g[6] | (ex3_rsqrt_t[6] & ex3_rsqrt_g[7]);
assign ex3_rsqrt_g2[5] = ex3_rsqrt_g[5] | (ex3_rsqrt_t[5] & ex3_rsqrt_g[6]);
assign ex3_rsqrt_g2[4] = ex3_rsqrt_g[4] | (ex3_rsqrt_t[4] & ex3_rsqrt_g[5]);
assign ex3_rsqrt_g2[3] = ex3_rsqrt_g[3] | (ex3_rsqrt_t[3] & ex3_rsqrt_g[4]);
assign ex3_rsqrt_g2[2] = ex3_rsqrt_g[2] | (ex3_rsqrt_t[2] & ex3_rsqrt_g[3]);
assign ex3_rsqrt_t2[11] = (ex3_rsqrt_t[11] & ex3_rsqrt_t[12]);
assign ex3_rsqrt_t2[10] = (ex3_rsqrt_t[10] & ex3_rsqrt_t[11]);
assign ex3_rsqrt_t2[9] = (ex3_rsqrt_t[9] & ex3_rsqrt_t[10]);
assign ex3_rsqrt_t2[8] = (ex3_rsqrt_t[8] & ex3_rsqrt_t[9]);
assign ex3_rsqrt_t2[7] = (ex3_rsqrt_t[7] & ex3_rsqrt_t[8]);
assign ex3_rsqrt_t2[6] = (ex3_rsqrt_t[6] & ex3_rsqrt_t[7]);
assign ex3_rsqrt_t2[5] = (ex3_rsqrt_t[5] & ex3_rsqrt_t[6]);
assign ex3_rsqrt_t2[4] = (ex3_rsqrt_t[4] & ex3_rsqrt_t[5]);
assign ex3_rsqrt_t2[3] = (ex3_rsqrt_t[3] & ex3_rsqrt_t[4]);
assign ex3_rsqrt_t2[2] = (ex3_rsqrt_t[2] & ex3_rsqrt_t[3]);
assign ex3_rsqrt_g4[13] = ex3_rsqrt_g2[13];
assign ex3_rsqrt_g4[12] = ex3_rsqrt_g2[12];
assign ex3_rsqrt_g4[11] = ex3_rsqrt_g2[11] | (ex3_rsqrt_t2[11] & ex3_rsqrt_g2[13]);
assign ex3_rsqrt_g4[10] = ex3_rsqrt_g2[10] | (ex3_rsqrt_t2[10] & ex3_rsqrt_g2[12]);
assign ex3_rsqrt_g4[9] = ex3_rsqrt_g2[9] | (ex3_rsqrt_t2[9] & ex3_rsqrt_g2[11]);
assign ex3_rsqrt_g4[8] = ex3_rsqrt_g2[8] | (ex3_rsqrt_t2[8] & ex3_rsqrt_g2[10]);
assign ex3_rsqrt_g4[7] = ex3_rsqrt_g2[7] | (ex3_rsqrt_t2[7] & ex3_rsqrt_g2[9]);
assign ex3_rsqrt_g4[6] = ex3_rsqrt_g2[6] | (ex3_rsqrt_t2[6] & ex3_rsqrt_g2[8]);
assign ex3_rsqrt_g4[5] = ex3_rsqrt_g2[5] | (ex3_rsqrt_t2[5] & ex3_rsqrt_g2[7]);
assign ex3_rsqrt_g4[4] = ex3_rsqrt_g2[4] | (ex3_rsqrt_t2[4] & ex3_rsqrt_g2[6]);
assign ex3_rsqrt_g4[3] = ex3_rsqrt_g2[3] | (ex3_rsqrt_t2[3] & ex3_rsqrt_g2[5]);
assign ex3_rsqrt_g4[2] = ex3_rsqrt_g2[2] | (ex3_rsqrt_t2[2] & ex3_rsqrt_g2[4]);
assign ex3_rsqrt_t4[9] = (ex3_rsqrt_t2[9] & ex3_rsqrt_t2[11]);
assign ex3_rsqrt_t4[8] = (ex3_rsqrt_t2[8] & ex3_rsqrt_t2[10]);
assign ex3_rsqrt_t4[7] = (ex3_rsqrt_t2[7] & ex3_rsqrt_t2[9]);
assign ex3_rsqrt_t4[6] = (ex3_rsqrt_t2[6] & ex3_rsqrt_t2[8]);
assign ex3_rsqrt_t4[5] = (ex3_rsqrt_t2[5] & ex3_rsqrt_t2[7]);
assign ex3_rsqrt_t4[4] = (ex3_rsqrt_t2[4] & ex3_rsqrt_t2[6]);
assign ex3_rsqrt_t4[3] = (ex3_rsqrt_t2[3] & ex3_rsqrt_t2[5]);
assign ex3_rsqrt_t4[2] = (ex3_rsqrt_t2[2] & ex3_rsqrt_t2[4]);
assign ex3_rsqrt_g8[13] = ex3_rsqrt_g4[13];
assign ex3_rsqrt_g8[12] = ex3_rsqrt_g4[12];
assign ex3_rsqrt_g8[11] = ex3_rsqrt_g4[11];
assign ex3_rsqrt_g8[10] = ex3_rsqrt_g4[10];
assign ex3_rsqrt_g8[9] = ex3_rsqrt_g4[9] | (ex3_rsqrt_t4[9] & ex3_rsqrt_g4[13]);
assign ex3_rsqrt_g8[8] = ex3_rsqrt_g4[8] | (ex3_rsqrt_t4[8] & ex3_rsqrt_g4[12]);
assign ex3_rsqrt_g8[7] = ex3_rsqrt_g4[7] | (ex3_rsqrt_t4[7] & ex3_rsqrt_g4[11]);
assign ex3_rsqrt_g8[6] = ex3_rsqrt_g4[6] | (ex3_rsqrt_t4[6] & ex3_rsqrt_g4[10]);
assign ex3_rsqrt_g8[5] = ex3_rsqrt_g4[5] | (ex3_rsqrt_t4[5] & ex3_rsqrt_g4[9]);
assign ex3_rsqrt_g8[4] = ex3_rsqrt_g4[4] | (ex3_rsqrt_t4[4] & ex3_rsqrt_g4[8]);
assign ex3_rsqrt_g8[3] = ex3_rsqrt_g4[3] | (ex3_rsqrt_t4[3] & ex3_rsqrt_g4[7]);
assign ex3_rsqrt_g8[2] = ex3_rsqrt_g4[2] | (ex3_rsqrt_t4[2] & ex3_rsqrt_g4[6]);
assign ex3_rsqrt_t8[5] = (ex3_rsqrt_t4[5] & ex3_rsqrt_t4[9]);
assign ex3_rsqrt_t8[4] = (ex3_rsqrt_t4[4] & ex3_rsqrt_t4[8]);
assign ex3_rsqrt_t8[3] = (ex3_rsqrt_t4[3] & ex3_rsqrt_t4[7]);
assign ex3_rsqrt_t8[2] = (ex3_rsqrt_t4[2] & ex3_rsqrt_t4[6]);
assign ex3_rsqrt_c[13] = ex3_rsqrt_g8[13];
assign ex3_rsqrt_c[12] = ex3_rsqrt_g8[12];
assign ex3_rsqrt_c[11] = ex3_rsqrt_g8[11];
assign ex3_rsqrt_c[10] = ex3_rsqrt_g8[10];
assign ex3_rsqrt_c[9] = ex3_rsqrt_g8[9];
assign ex3_rsqrt_c[8] = ex3_rsqrt_g8[8];
assign ex3_rsqrt_c[7] = ex3_rsqrt_g8[7];
assign ex3_rsqrt_c[6] = ex3_rsqrt_g8[6];
assign ex3_rsqrt_c[5] = ex3_rsqrt_g8[5] | (ex3_rsqrt_t8[5] & ex3_rsqrt_g8[13]);
assign ex3_rsqrt_c[4] = ex3_rsqrt_g8[4] | (ex3_rsqrt_t8[4] & ex3_rsqrt_g8[12]);
assign ex3_rsqrt_c[3] = ex3_rsqrt_g8[3] | (ex3_rsqrt_t8[3] & ex3_rsqrt_g8[11]);
assign ex3_rsqrt_c[2] = ex3_rsqrt_g8[2] | (ex3_rsqrt_t8[2] & ex3_rsqrt_g8[10]);
assign ex3_rsqrt_expo[1:12] = ex3_rsqrt_p[1:12] ^ ex3_rsqrt_c[2:13];
assign ex3_rsqrt_expo[13] = ex3_rsqrt_p[13];
////#--------------------------------------------
////# select the result
////#--------------------------------------------
assign ex3_res_expo[1:13] = ({13{f_pic_ex3_est_rsqrt}} & ex3_rsqrt_expo[1:13]) |
({13{f_pic_ex3_est_recip}} & ex3_recip_expo[1:13]);
////#--------------------------------------------
////## --------------------------------------------------
////## DETECT: exponents that require denormalization
//
// rsqrte: -( (e - bias)/2 ) + bias = -e/2 + 3/2 bias
// expo = 7ff inf/nan (2047) <=== special case logic gives result
// expo = 7fe (2046) -(2046 - 1023)/2 + 1023 = -1023/2 + 1023 = -512 + 1023 = 611 : norm
//
//
// recip : 2bias -expo = -(e - bias) + bias
// expo = 7ff inf/nan (2047) <=== special case logic gives result
// expo = 7fe (2046) 2bias -expo = 2046 - 2046 = x000 denorm
// expo = 7fd (2045) 2046 - 2045 = x001 denorm ?
// expo = 7fc (2044) 2046 - 2044 = x002 norm (denorm if adjust)
////## --------------------------------------------------
// for sp underflow, no need to denormalize, but must set the UX flag
// 2046 -1151 = 895 - 1 = 894 <=== INF/NAN in sp range
// 2046 -1150 = 896 - 1 = 895 x380
// 2046 -1149 = 897 - 1 = 896 x380
// 2046 -1148 = 898 - 1 = 897 (denorm if adjust)
//
// 2046 111_1111_11110
// 2045 111_1111_11101
// 2044 111_1111_11100
//
// 1150 100_0111_11110
// 1149 100_0111_11101
// 1148 100_0111_11100
//
// 0512
assign ex3_mid_match_ifsp = (~f_eie_ex3_tbl_expo[4]) & (~f_eie_ex3_tbl_expo[5]) & (~f_eie_ex3_tbl_expo[6]); // 0256
// 0128
// 0512 total = 896
assign ex3_mid_match_ifdp = f_eie_ex3_tbl_expo[4] & f_eie_ex3_tbl_expo[5] & f_eie_ex3_tbl_expo[6]; // 0256
// 0128
// sign
// 2048
// 1024
// 0064
// 0032
// 0016
assign ex3_com_match = (~f_eie_ex3_tbl_expo[1]) & (~f_eie_ex3_tbl_expo[2]) & f_eie_ex3_tbl_expo[3] & f_eie_ex3_tbl_expo[7] & f_eie_ex3_tbl_expo[8] & f_eie_ex3_tbl_expo[9] & f_eie_ex3_tbl_expo[10] & f_eie_ex3_tbl_expo[11]; // 0008
// 0004
assign ex3_match_en_dp = ex3_com_match & f_pic_ex3_sp_b & ex3_mid_match_ifdp;
assign ex3_match_en_sp = ex3_com_match & (~f_pic_ex3_sp_b) & ex3_mid_match_ifsp;
// not f_pic_ex3_ue1 and
assign ex3_recip_2046 = f_pic_ex3_est_recip & f_eie_ex3_tbl_expo[12] & (~f_eie_ex3_tbl_expo[13]); // 0002
// 0001
// not f_pic_ex3_ue1 and
assign ex3_recip_2045 = f_pic_ex3_est_recip & (~f_eie_ex3_tbl_expo[12]) & f_eie_ex3_tbl_expo[13]; // 0002
// 0001
// not f_pic_ex3_ue1 and
assign ex3_recip_2044 = f_pic_ex3_est_recip & (~f_eie_ex3_tbl_expo[12]) & (~f_eie_ex3_tbl_expo[13]); // 0002
// 0001
assign ex3_recip_ue1 = f_pic_ex3_est_recip & f_pic_ex3_ue1;
////##############################################
////# EX4 latches
////##############################################
// name says odd(unbiased) but it is really for even biased.
assign ex3_lu_sh = (f_fmt_ex3_lu_den_recip & f_pic_ex3_est_recip) | (f_fmt_ex3_lu_den_rsqrto & f_pic_ex3_est_rsqrt & (~f_eie_ex3_tbl_expo[13]));
tri_rlmreg_p #(.WIDTH(20)) ex4_expo_lat(
.force_t(force_t), //tidn,
.d_mode(tiup), //d_mode => d_mode ,--tiup,
.delay_lclkr(delay_lclkr[3]), //tidn,
.mpw1_b(mpw1_b[3]), //tidn,
.mpw2_b(mpw2_b[0]), //tidn,
.vd(vdd),
.gd(gnd),
.nclk(nclk),
.thold_b(thold_0_b),
.sg(sg_0),
.act(ex3_act),
.scout(ex4_expo_so),
.scin(ex4_expo_si),
.din({ ex3_res_expo[1:13],
ex3_match_en_dp,
ex3_match_en_sp,
ex3_recip_2046,
ex3_recip_2045,
ex3_recip_2044,
ex3_lu_sh,
ex3_recip_ue1}),
//-----------------
.dout({ ex4_res_expo[1:13], //LAT--
ex4_match_en_dp, //LAT--
ex4_match_en_sp, //LAT--
ex4_recip_2046, //LAT--
ex4_recip_2045, //LAT--
ex4_recip_2044, //LAT--
ex4_lu_sh, //LAT--
ex4_recip_ue1}) //LAT--
);
////##############################################
////# EX4 logic
////##############################################
assign f_tbe_ex4_match_en_sp = ex4_match_en_sp; //output
assign f_tbe_ex4_match_en_dp = ex4_match_en_dp; //output
assign f_tbe_ex4_recip_2046 = ex4_recip_2046; //output
assign f_tbe_ex4_recip_2045 = ex4_recip_2045; //output
assign f_tbe_ex4_recip_2044 = ex4_recip_2044; //output
assign f_tbe_ex4_lu_sh = ex4_lu_sh; //output--
assign f_tbe_ex4_recip_ue1 = ex4_recip_ue1; //output--
assign ex4_recip_2046_dp = ex4_recip_2046 & ex4_match_en_dp & (~ex4_recip_ue1); // for shifting
assign ex4_recip_2045_dp = ex4_recip_2045 & ex4_match_en_dp & (~ex4_recip_ue1); // for shifting
assign ex4_recip_2044_dp = ex4_recip_2044 & ex4_match_en_dp & (~ex4_recip_ue1); // for shifting
assign ex4_force_expo_den = ex4_recip_2046_dp | ex4_recip_2045_dp; // do not force DEN for ue1 mode
// 2044 conditionally backs into denorm depending on lu_sh ... decrement
assign ex4_decr_expo = (ex4_lu_sh & ex4_recip_ue1) | (ex4_lu_sh & (~ex4_recip_ue1) & (~ex4_recip_2046_dp) & (~ex4_recip_2045_dp) & (~ex4_recip_2044_dp)); // for denormalization / normalization
// decrement is like add 11111....11111 (lsb does not change
// t = 1
// g = d
assign ex4_res_expo_b[1:13] = (~ex4_res_expo[1:13]);
assign ex4_res_expo_g2_b[13] = (~(ex4_res_expo[13]));
assign ex4_res_expo_g2_b[12] = (~(ex4_res_expo[12] | ex4_res_expo[13]));
assign ex4_res_expo_g2_b[11] = (~(ex4_res_expo[11] | ex4_res_expo[12]));
assign ex4_res_expo_g2_b[10] = (~(ex4_res_expo[10] | ex4_res_expo[11]));
assign ex4_res_expo_g2_b[9] = (~(ex4_res_expo[9] | ex4_res_expo[10]));
assign ex4_res_expo_g2_b[8] = (~(ex4_res_expo[8] | ex4_res_expo[9]));
assign ex4_res_expo_g2_b[7] = (~(ex4_res_expo[7] | ex4_res_expo[8]));
assign ex4_res_expo_g2_b[6] = (~(ex4_res_expo[6] | ex4_res_expo[7]));
assign ex4_res_expo_g2_b[5] = (~(ex4_res_expo[5] | ex4_res_expo[6]));
assign ex4_res_expo_g2_b[4] = (~(ex4_res_expo[4] | ex4_res_expo[5]));
assign ex4_res_expo_g2_b[3] = (~(ex4_res_expo[3] | ex4_res_expo[4]));
assign ex4_res_expo_g2_b[2] = (~(ex4_res_expo[2] | ex4_res_expo[3]));
assign ex4_res_expo_g4[13] = (~(ex4_res_expo_g2_b[13]));
assign ex4_res_expo_g4[12] = (~(ex4_res_expo_g2_b[12]));
assign ex4_res_expo_g4[11] = (~(ex4_res_expo_g2_b[11] & ex4_res_expo_g2_b[13]));
assign ex4_res_expo_g4[10] = (~(ex4_res_expo_g2_b[10] & ex4_res_expo_g2_b[12]));
assign ex4_res_expo_g4[9] = (~(ex4_res_expo_g2_b[9] & ex4_res_expo_g2_b[11]));
assign ex4_res_expo_g4[8] = (~(ex4_res_expo_g2_b[8] & ex4_res_expo_g2_b[10]));
assign ex4_res_expo_g4[7] = (~(ex4_res_expo_g2_b[7] & ex4_res_expo_g2_b[9]));
assign ex4_res_expo_g4[6] = (~(ex4_res_expo_g2_b[6] & ex4_res_expo_g2_b[8]));
assign ex4_res_expo_g4[5] = (~(ex4_res_expo_g2_b[5] & ex4_res_expo_g2_b[7]));
assign ex4_res_expo_g4[4] = (~(ex4_res_expo_g2_b[4] & ex4_res_expo_g2_b[6]));
assign ex4_res_expo_g4[3] = (~(ex4_res_expo_g2_b[3] & ex4_res_expo_g2_b[5]));
assign ex4_res_expo_g4[2] = (~(ex4_res_expo_g2_b[2] & ex4_res_expo_g2_b[4]));
assign ex4_res_expo_g8_b[13] = (~(ex4_res_expo_g4[13]));
assign ex4_res_expo_g8_b[12] = (~(ex4_res_expo_g4[12]));
assign ex4_res_expo_g8_b[11] = (~(ex4_res_expo_g4[11]));
assign ex4_res_expo_g8_b[10] = (~(ex4_res_expo_g4[10]));
assign ex4_res_expo_g8_b[9] = (~(ex4_res_expo_g4[9] | ex4_res_expo_g4[13]));
assign ex4_res_expo_g8_b[8] = (~(ex4_res_expo_g4[8] | ex4_res_expo_g4[12]));
assign ex4_res_expo_g8_b[7] = (~(ex4_res_expo_g4[7] | ex4_res_expo_g4[11]));
assign ex4_res_expo_g8_b[6] = (~(ex4_res_expo_g4[6] | ex4_res_expo_g4[10]));
assign ex4_res_expo_g8_b[5] = (~(ex4_res_expo_g4[5] | ex4_res_expo_g4[9]));
assign ex4_res_expo_g8_b[4] = (~(ex4_res_expo_g4[4] | ex4_res_expo_g4[8]));
assign ex4_res_expo_g8_b[3] = (~(ex4_res_expo_g4[3] | ex4_res_expo_g4[7]));
assign ex4_res_expo_g8_b[2] = (~(ex4_res_expo_g4[2] | ex4_res_expo_g4[6]));
assign ex4_res_expo_c[13] = (~(ex4_res_expo_g8_b[13]));
assign ex4_res_expo_c[12] = (~(ex4_res_expo_g8_b[12]));
assign ex4_res_expo_c[11] = (~(ex4_res_expo_g8_b[11]));
assign ex4_res_expo_c[10] = (~(ex4_res_expo_g8_b[10]));
assign ex4_res_expo_c[9] = (~(ex4_res_expo_g8_b[9]));
assign ex4_res_expo_c[8] = (~(ex4_res_expo_g8_b[8]));
assign ex4_res_expo_c[7] = (~(ex4_res_expo_g8_b[7]));
assign ex4_res_expo_c[6] = (~(ex4_res_expo_g8_b[6]));
assign ex4_res_expo_c[5] = (~(ex4_res_expo_g8_b[5] & ex4_res_expo_g8_b[13]));
assign ex4_res_expo_c[4] = (~(ex4_res_expo_g8_b[4] & ex4_res_expo_g8_b[12]));
assign ex4_res_expo_c[3] = (~(ex4_res_expo_g8_b[3] & ex4_res_expo_g8_b[11]));
assign ex4_res_expo_c[2] = (~(ex4_res_expo_g8_b[2] & ex4_res_expo_g8_b[10]));
assign ex4_res_decr[1:12] = ex4_res_expo_b[1:12] ^ ex4_res_expo_c[2:13];
assign ex4_res_decr[13] = ex4_res_expo_b[13];
assign f_tbe_ex4_res_expo[1] = (ex4_res_expo[1] & (~ex4_decr_expo) & (~ex4_force_expo_den)) | (ex4_res_decr[1] & ex4_decr_expo); //output
assign f_tbe_ex4_res_expo[2] = (ex4_res_expo[2] & (~ex4_decr_expo) & (~ex4_force_expo_den)) | (ex4_res_decr[2] & ex4_decr_expo); //output
assign f_tbe_ex4_res_expo[3] = (ex4_res_expo[3] & (~ex4_decr_expo) & (~ex4_force_expo_den)) | (ex4_res_decr[3] & ex4_decr_expo); //output
assign f_tbe_ex4_res_expo[4] = (ex4_res_expo[4] & (~ex4_decr_expo) & (~ex4_force_expo_den)) | (ex4_res_decr[4] & ex4_decr_expo); //output
assign f_tbe_ex4_res_expo[5] = (ex4_res_expo[5] & (~ex4_decr_expo) & (~ex4_force_expo_den)) | (ex4_res_decr[5] & ex4_decr_expo); //output
assign f_tbe_ex4_res_expo[6] = (ex4_res_expo[6] & (~ex4_decr_expo) & (~ex4_force_expo_den)) | (ex4_res_decr[6] & ex4_decr_expo); //output
assign f_tbe_ex4_res_expo[7] = (ex4_res_expo[7] & (~ex4_decr_expo) & (~ex4_force_expo_den)) | (ex4_res_decr[7] & ex4_decr_expo); //output
assign f_tbe_ex4_res_expo[8] = (ex4_res_expo[8] & (~ex4_decr_expo) & (~ex4_force_expo_den)) | (ex4_res_decr[8] & ex4_decr_expo); //output
assign f_tbe_ex4_res_expo[9] = (ex4_res_expo[9] & (~ex4_decr_expo) & (~ex4_force_expo_den)) | (ex4_res_decr[9] & ex4_decr_expo); //output
assign f_tbe_ex4_res_expo[10] = (ex4_res_expo[10] & (~ex4_decr_expo) & (~ex4_force_expo_den)) | (ex4_res_decr[10] & ex4_decr_expo); //output
assign f_tbe_ex4_res_expo[11] = (ex4_res_expo[11] & (~ex4_decr_expo) & (~ex4_force_expo_den)) | (ex4_res_decr[11] & ex4_decr_expo); //output
assign f_tbe_ex4_res_expo[12] = (ex4_res_expo[12] & (~ex4_decr_expo) & (~ex4_force_expo_den)) | (ex4_res_decr[12] & ex4_decr_expo); //output
assign f_tbe_ex4_res_expo[13] = (ex4_res_expo[13] & (~ex4_decr_expo)) | (ex4_res_decr[13] & ex4_decr_expo) | (ex4_force_expo_den); //output
// (not ex4_res_expo(1) and ex4_res_expo(3) ) or
assign f_tbe_ex4_may_ov = ((~ex4_res_expo[1]) & ex4_res_expo[2]) | ((~ex4_res_expo[1]) & ex4_res_expo[3] & ex4_res_expo[4]) | ((~ex4_res_expo[1]) & ex4_res_expo[3] & ex4_res_expo[5]) | ((~ex4_res_expo[1]) & ex4_res_expo[3] & ex4_res_expo[6]) | ((~ex4_res_expo[1]) & ex4_res_expo[3] & ex4_res_expo[7]) | ((~ex4_res_expo[1]) & ex4_res_expo[3] & ex4_res_expo[8] & ex4_res_expo[9]); // before the den adjustments on purpose
////############################################
////# scan
////############################################
assign ex4_expo_si[0:19] = {ex4_expo_so[1:19], si};
assign act_si[0:4] = {act_so[1:4], ex4_expo_so[0]};
assign so = act_so[0];
endmodule