You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

302 lines
9.9 KiB
Verilog

2 years ago
// © IBM Corp. 2020
// Licensed under the Apache License, Version 2.0 (the "License"), as modified by
// the terms below; you may not use the files in this repository except in
// compliance with the License as modified.
// You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0
//
// Modified Terms:
//
// 1) For the purpose of the patent license granted to you in Section 3 of the
// License, the "Work" hereby includes implementations of the work of authorship
// in physical form.
//
// 2) Notwithstanding any terms to the contrary in the License, any licenses
// necessary for implementation of the Work that are available from OpenPOWER
// via the Power ISA End User License Agreement (EULA) are explicitly excluded
// hereunder, and may be obtained from OpenPOWER under the terms and conditions
// of the EULA.
//
// Unless required by applicable law or agreed to in writing, the reference design
// distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
// WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
// for the specific language governing permissions and limitations under the License.
//
// Additional rights, including the ability to physically implement a softcore that
// is compliant with the required sections of the Power ISA Specification, are
// available at no cost under the terms of the OpenPOWER Power ISA EULA, which can be
// obtained (along with the Power ISA) here: https://openpowerfoundation.org.
`timescale 1 ns / 1 ns
//*****************************************************************************
// Description: XU BCD Assist Instructions
//
//*****************************************************************************
`include "tri_a2o.vh"
module xu0_bcd(
// Clocks
input [0:`NCLK_WIDTH-1] nclk,
// Power
inout vdd,
inout gnd,
// Pervasive
input d_mode_dc,
input delay_lclkr_dc,
input mpw1_dc_b,
input mpw2_dc_b,
input func_sl_force,
input func_sl_thold_0_b,
input sg_0,
input scan_in,
output scan_out,
// Decode Inputs
input dec_bcd_ex1_val,
input dec_bcd_ex1_is_addg6s,
input dec_bcd_ex1_is_cdtbcd,
// Source Data
input [64-`GPR_WIDTH:63] byp_bcd_ex2_rs1,
input [64-`GPR_WIDTH:63] byp_bcd_ex2_rs2,
// Target Data
output [64-`GPR_WIDTH:63] bcd_byp_ex3_rt,
output bcd_byp_ex3_done
);
// Latches
wire ex2_val_q; // input=>dec_bcd_ex1_val ,act=>1'b1
wire ex2_is_addg6s_q; // input=>dec_bcd_ex1_is_addg6s ,act=>dec_bcd_ex1_val
wire ex2_is_cdtbcd_q; // input=>dec_bcd_ex1_is_cdtbcd ,act=>dec_bcd_ex1_val
wire [64-`GPR_WIDTH:63] ex3_bcd_rt_q; // input=>ex2_bcd_rt ,act=>ex2_val_q
wire [64-`GPR_WIDTH:63] ex2_bcd_rt;
wire ex3_val_q; // input=>ex2_val_q ,act=>1'b1
// Scanchains
localparam ex2_val_offset = 0;
localparam ex2_is_addg6s_offset = ex2_val_offset + 1;
localparam ex2_is_cdtbcd_offset = ex2_is_addg6s_offset + 1;
localparam ex3_bcd_rt_offset = ex2_is_cdtbcd_offset + 1;
localparam ex3_val_offset = ex3_bcd_rt_offset + `GPR_WIDTH;
localparam scan_right = ex3_val_offset + 1;
wire [0:scan_right-1] siv;
wire [0:scan_right-1] sov;
wire [0:63] g0;
wire [0:63] g1;
wire [0:63] g2;
wire [0:63] g3;
wire [0:63] g4;
wire [0:63] g5;
wire [0:63] g6;
wire [0:62] p0;
wire [0:61] p1;
wire [0:59] p2;
wire [0:55] p3;
wire [0:47] p4;
wire [0:31] p5;
wire [0:63] ex2_bcdtd_rt;
wire [0:63] ex2_dtbcd_rt;
wire [0:63] ex2_sixes_rt;
(* analysis_not_referenced="true" *)
wire unused;
// BCD to DPD
xu0_bcd_bcdtd bcdtd00(
.a(byp_bcd_ex2_rs1[8:19]),
.y(ex2_bcdtd_rt[12:21])
);
xu0_bcd_bcdtd bcdtd01(
.a(byp_bcd_ex2_rs1[20:31]),
.y(ex2_bcdtd_rt[22:31])
);
xu0_bcd_bcdtd bcdtd10(
.a(byp_bcd_ex2_rs1[40:51]),
.y(ex2_bcdtd_rt[44:53])
);
xu0_bcd_bcdtd bcdtd11(
.a(byp_bcd_ex2_rs1[52:63]),
.y(ex2_bcdtd_rt[54:63])
);
assign ex2_bcdtd_rt[0:11] = {12{1'b0}};
assign ex2_bcdtd_rt[32:43] = {12{1'b0}};
// DPD to BCD
xu0_bcd_dtbcd dtbcd00(
.a(byp_bcd_ex2_rs1[12:21]),
.y(ex2_dtbcd_rt[8:19])
);
xu0_bcd_dtbcd dtbcd01(
.a(byp_bcd_ex2_rs1[22:31]),
.y(ex2_dtbcd_rt[20:31])
);
xu0_bcd_dtbcd dtbcd10(
.a(byp_bcd_ex2_rs1[44:53]),
.y(ex2_dtbcd_rt[40:51])
);
xu0_bcd_dtbcd dtbcd11(
.a(byp_bcd_ex2_rs1[54:63]),
.y(ex2_dtbcd_rt[52:63])
);
assign ex2_dtbcd_rt[0:7] = {8{1'b0}};
assign ex2_dtbcd_rt[32:39] = {8{1'b0}};
// ADDG6S
assign p0[00:62] = byp_bcd_ex2_rs1[00:62] ^ byp_bcd_ex2_rs2[00:62];
assign g0[00:63] = byp_bcd_ex2_rs1[00:63] & byp_bcd_ex2_rs2[00:63];
// L1 (1)
assign g1[00:62] = (p0[00:62] & g0[01:63]) | g0[00:62];
assign g1[63:63] = g0[63:63];
assign p1[00:61] = p0[00:61] & p0[01:62];
// L2 (2)
assign g2[00:61] = (p1[00:61] & g1[02:63]) | g1[00:61];
assign g2[62:63] = g1[62:63];
assign p2[00:59] = p1[00:59] & p1[02:61];
// L3 (4)
assign g3[00:59] = (p2[00:59] & g2[04:63]) | g2[00:59];
assign g3[60:63] = g2[60:63];
assign p3[00:55] = p2[00:55] & p2[04:59];
// L4 (8)
assign g4[00:55] = (p3[00:55] & g3[08:63]) | g3[00:55];
assign g4[56:63] = g3[56:63];
assign p4[00:47] = p3[00:47] & p3[08:55];
// L5 (16)
assign g5[00:47] = (p4[00:47] & g4[16:63]) | g4[00:47];
assign g5[48:63] = g4[48:63];
assign p5[00:31] = p4[00:31] & p4[16:47];
// L6 (32)
assign g6[00:31] = (p5[00:31] & g5[32:63]) | g5[00:31];
assign g6[32:63] = g5[32:63];
generate
genvar b;
for (b = 0; b <= 15; b = b + 1)
begin : nibble
assign ex2_sixes_rt[4 * b:4 * b + 3] = (g6[b * 4] == 1'b0) ? 4'b0110 :
4'b0000;
end
endgenerate
//!! bugspray include: tri_a2o.bil
//!! %for(i=0;i<16;++i)
//!! [count; scenarios.addg6s_n%(i)_0 ; bugclk] : (pri2) <= ex2_val_q and ex2_is_addg6s_q and not g6(%(i*4));
//!! [count; scenarios.addg6s_n%(i)_1 ; bugclk] : (pri2) <= ex2_val_q and ex2_is_addg6s_q and g6(%(i*4));
//!! %end
assign ex2_bcd_rt = ({ex2_is_addg6s_q, ex2_is_cdtbcd_q} == 2'b10) ? ex2_sixes_rt :
({ex2_is_addg6s_q, ex2_is_cdtbcd_q} == 2'b01) ? ex2_dtbcd_rt :
ex2_bcdtd_rt;
assign bcd_byp_ex3_rt = ex3_bcd_rt_q;
assign bcd_byp_ex3_done = ex3_val_q;
// Latches
tri_rlmlatch_p #(.INIT(0), .NEEDS_SRESET(1)) ex2_val_latch(
.nclk(nclk),
.vd(vdd),
.gd(gnd),
.act(1'b1),
.force_t(func_sl_force),
.d_mode(d_mode_dc),
.delay_lclkr(delay_lclkr_dc),
.mpw1_b(mpw1_dc_b),
.mpw2_b(mpw2_dc_b),
.thold_b(func_sl_thold_0_b),
.sg(sg_0),
.scin(siv[ex2_val_offset]),
.scout(sov[ex2_val_offset]),
.din(dec_bcd_ex1_val),
.dout(ex2_val_q)
);
tri_rlmlatch_p #(.INIT(0), .NEEDS_SRESET(1)) ex2_is_addg6s_latch(
.nclk(nclk),
.vd(vdd),
.gd(gnd),
.act(dec_bcd_ex1_val),
.force_t(func_sl_force),
.d_mode(d_mode_dc),
.delay_lclkr(delay_lclkr_dc),
.mpw1_b(mpw1_dc_b),
.mpw2_b(mpw2_dc_b),
.thold_b(func_sl_thold_0_b),
.sg(sg_0),
.scin(siv[ex2_is_addg6s_offset]),
.scout(sov[ex2_is_addg6s_offset]),
.din(dec_bcd_ex1_is_addg6s),
.dout(ex2_is_addg6s_q)
);
tri_rlmlatch_p #(.INIT(0), .NEEDS_SRESET(1)) ex2_is_cdtbcd_latch(
.nclk(nclk),
.vd(vdd),
.gd(gnd),
.act(dec_bcd_ex1_val),
.force_t(func_sl_force),
.d_mode(d_mode_dc),
.delay_lclkr(delay_lclkr_dc),
.mpw1_b(mpw1_dc_b),
.mpw2_b(mpw2_dc_b),
.thold_b(func_sl_thold_0_b),
.sg(sg_0),
.scin(siv[ex2_is_cdtbcd_offset]),
.scout(sov[ex2_is_cdtbcd_offset]),
.din(dec_bcd_ex1_is_cdtbcd),
.dout(ex2_is_cdtbcd_q)
);
tri_rlmreg_p #(.WIDTH(`GPR_WIDTH), .INIT(0), .NEEDS_SRESET(1)) ex3_bcd_rt_latch(
.nclk(nclk),
.vd(vdd),
.gd(gnd),
.act(ex2_val_q),
.force_t(func_sl_force),
.d_mode(d_mode_dc),
.delay_lclkr(delay_lclkr_dc),
.mpw1_b(mpw1_dc_b),
.mpw2_b(mpw2_dc_b),
.thold_b(func_sl_thold_0_b),
.sg(sg_0),
.scin(siv[ex3_bcd_rt_offset:ex3_bcd_rt_offset + `GPR_WIDTH - 1]),
.scout(sov[ex3_bcd_rt_offset:ex3_bcd_rt_offset + `GPR_WIDTH - 1]),
.din(ex2_bcd_rt),
.dout(ex3_bcd_rt_q)
);
tri_rlmlatch_p #(.INIT(0), .NEEDS_SRESET(1)) ex3_val_latch(
.nclk(nclk),
.vd(vdd),
.gd(gnd),
.act(1'b1),
.force_t(func_sl_force),
.d_mode(d_mode_dc),
.delay_lclkr(delay_lclkr_dc),
.mpw1_b(mpw1_dc_b),
.mpw2_b(mpw2_dc_b),
.thold_b(func_sl_thold_0_b),
.sg(sg_0),
.scin(siv[ex3_val_offset]),
.scout(sov[ex3_val_offset]),
.din(ex2_val_q),
.dout(ex3_val_q)
);
assign siv[0:scan_right-1] = {sov[1:scan_right-1], scan_in};
assign scan_out = sov[0];
assign unused = (|g6[1:3]) | (|g6[5:7]) | (|g6[9:11]) | (|g6[13:15]) | (|g6[17:19]) | (|g6[21:23]) | (|g6[25:27]) |
(|g6[29:31]) | (|g6[33:35]) | (|g6[37:39]) | (|g6[41:43]) | (|g6[45:47]) | (|g6[49:51]) | (|g6[53:55]) |
(|g6[57:59]) | (|g6[61:63]);
endmodule