You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

556 lines
19 KiB
Verilog

2 years ago
// © IBM Corp. 2020
// Licensed under the Apache License, Version 2.0 (the "License"), as modified by
// the terms below; you may not use the files in this repository except in
// compliance with the License as modified.
// You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0
//
// Modified Terms:
//
// 1) For the purpose of the patent license granted to you in Section 3 of the
// License, the "Work" hereby includes implementations of the work of authorship
// in physical form.
//
// 2) Notwithstanding any terms to the contrary in the License, any licenses
// necessary for implementation of the Work that are available from OpenPOWER
// via the Power ISA End User License Agreement (EULA) are explicitly excluded
// hereunder, and may be obtained from OpenPOWER under the terms and conditions
// of the EULA.
//
// Unless required by applicable law or agreed to in writing, the reference design
// distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
// WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
// for the specific language governing permissions and limitations under the License.
//
// Additional rights, including the ability to physically implement a softcore that
// is compliant with the required sections of the Power ISA Specification, are
// available at no cost under the terms of the OpenPOWER Power ISA EULA, which can be
// obtained (along with the Power ISA) here: https://openpowerfoundation.org.
`timescale 1 ns / 1 ns
// Description: XU_FX ALU Top
//
//*****************************************************************************
`include "tri_a2o.vh"
module xu_alu(
//-------------------------------------------------------------------
// Clocks & Power
//-------------------------------------------------------------------
input [0:`NCLK_WIDTH-1] nclk,
inout vdd,
inout gnd,
//-------------------------------------------------------------------
// Pervasive
//-------------------------------------------------------------------
input d_mode_dc,
input delay_lclkr_dc,
input mpw1_dc_b,
input mpw2_dc_b,
input func_sl_force,
input func_sl_thold_0_b,
input sg_0,
input scan_in,
output scan_out,
//-------------------------------------------------------------------
// Decode Interface
//-------------------------------------------------------------------
input dec_alu_ex1_act,
input [0:31] dec_alu_ex1_instr,
input dec_alu_ex1_sel_isel, // Critical!
input [0:`GPR_WIDTH/8-1] dec_alu_ex1_add_rs1_inv,
input [0:1] dec_alu_ex2_add_ci_sel,
input dec_alu_ex1_sel_trap,
input dec_alu_ex1_sel_cmpl,
input dec_alu_ex1_sel_cmp,
input dec_alu_ex1_msb_64b_sel,
input dec_alu_ex1_xer_ov_en,
input dec_alu_ex1_xer_ca_en,
//-------------------------------------------------------------------
// Bypass Inputs
//-------------------------------------------------------------------
input [64-`GPR_WIDTH:63] byp_alu_ex2_rs1, // Source Data
input [64-`GPR_WIDTH:63] byp_alu_ex2_rs2,
input byp_alu_ex2_cr_bit, // CR bit for isel
input [0:9] byp_alu_ex2_xer,
//-------------------------------------------------------------------
// Bypass Outputs
//-------------------------------------------------------------------
output [64-`GPR_WIDTH:63] alu_byp_ex2_add_rt,
output [64-`GPR_WIDTH:63] alu_byp_ex3_rt,
output [0:3] alu_byp_ex3_cr,
output [0:9] alu_byp_ex3_xer,
output alu_dec_ex3_trap_val
);
localparam msb = 64 - `GPR_WIDTH;
// Latches
wire ex2_act_q; // input=>dec_alu_ex1_act ,act=>1'b1
wire ex2_sel_isel_q; // input=>dec_alu_ex1_sel_isel ,act=>dec_alu_ex1_act
wire ex2_msb_64b_sel_q; // input=>dec_alu_ex1_msb_64b_sel ,act=>dec_alu_ex1_act
wire ex2_sel_trap_q; // input=>dec_alu_ex1_sel_trap ,act=>dec_alu_ex1_act
wire ex2_sel_cmpl_q; // input=>dec_alu_ex1_sel_cmpl ,act=>dec_alu_ex1_act
wire ex2_sel_cmp_q; // input=>dec_alu_ex1_sel_cmp ,act=>dec_alu_ex1_act
wire [6:10] ex2_instr_6to10_q; // input=>dec_alu_ex1_instr(6 to 10) ,act=>dec_alu_ex1_act
wire ex2_xer_ov_en_q; // input=>dec_alu_ex1_xer_ov_en ,act=>dec_alu_ex1_act
wire ex2_xer_ca_en_q; // input=>dec_alu_ex1_xer_ca_en ,act=>dec_alu_ex1_act
wire ex3_add_ca_q; // input=>ex2_add_ca ,act=>ex2_act_q
wire ex2_add_ca;
wire ex3_add_ovf_q; // input=>ex2_add_ovf ,act=>ex2_act_q
wire ex2_add_ovf;
wire ex3_sel_rot_log_q; // input=>ex2_sel_rot_log ,act=>ex2_act_q
wire ex2_sel_rot_log;
wire [0:9] ex3_xer_q; // input=>byp_alu_ex2_xer(0 to 9) ,act=>ex2_act_q
wire ex3_xer_ov_en_q; // input=>ex2_xer_ov_en_q ,act=>ex2_act_q
wire ex3_xer_ca_en_q; // input=>ex2_xer_ca_en_q ,act=>ex2_act_q
// Scanchains
localparam ex2_act_offset = 3;
localparam ex2_sel_isel_offset = ex2_act_offset + 1;
localparam ex2_msb_64b_sel_offset = ex2_sel_isel_offset + 1;
localparam ex2_sel_trap_offset = ex2_msb_64b_sel_offset + 1;
localparam ex2_sel_cmpl_offset = ex2_sel_trap_offset + 1;
localparam ex2_sel_cmp_offset = ex2_sel_cmpl_offset + 1;
localparam ex2_instr_6to10_offset = ex2_sel_cmp_offset + 1;
localparam ex2_xer_ov_en_offset = ex2_instr_6to10_offset + 5;
localparam ex2_xer_ca_en_offset = ex2_xer_ov_en_offset + 1;
localparam ex3_add_ca_offset = ex2_xer_ca_en_offset + 1;
localparam ex3_add_ovf_offset = ex3_add_ca_offset + 1;
localparam ex3_sel_rot_log_offset = ex3_add_ovf_offset + 1;
localparam ex3_xer_offset = ex3_sel_rot_log_offset + 1;
localparam ex3_xer_ov_en_offset = ex3_xer_offset + 10;
localparam ex3_xer_ca_en_offset = ex3_xer_ov_en_offset + 1;
localparam scan_right = ex3_xer_ca_en_offset + 1;
wire [0:scan_right-1] siv;
wire [0:scan_right-1] sov;
//!! bugspray include: xu_alu.bil;
// Signals
wire [msb:63] ex2_add_rs1;
wire [msb:63] ex2_add_rs2;
wire [msb:63] ex2_rot_rs0_b;
wire [msb:63] ex2_rot_rs1_b;
wire [msb:63] ex2_add_rt;
wire [msb:63] ex3_alu_rt;
wire ex3_rot_ca;
wire ex3_alu_ca;
wire ex2_add_ci;
wire [0:3] ex2_isel_fcn;
wire [0:3] ex2_isel_type;
wire ex3_alu_so;
//---------------------------------------------------------------
// Source Buffering
//---------------------------------------------------------------
assign ex2_add_rs1 = byp_alu_ex2_rs1;
assign ex2_add_rs2 = byp_alu_ex2_rs2;
assign ex2_rot_rs0_b = (~byp_alu_ex2_rs1);
assign ex2_rot_rs1_b = (~byp_alu_ex2_rs2);
//---------------------------------------------------------------
// Target Muxing/Buffering
//---------------------------------------------------------------
assign alu_byp_ex3_rt = ex3_alu_rt;
assign ex3_alu_ca = (ex3_sel_rot_log_q == 1'b1) ? ex3_rot_ca :
ex3_add_ca_q;
assign alu_byp_ex3_cr[3] = ex3_alu_so;
assign alu_byp_ex3_xer[0] = ex3_alu_so;
assign ex3_alu_so = (ex3_xer_ov_en_q == 1'b1) ? ex3_add_ovf_q | ex3_xer_q[0] :
ex3_xer_q[0];
assign alu_byp_ex3_xer[1] = (ex3_xer_ov_en_q == 1'b1) ? ex3_add_ovf_q :
ex3_xer_q[1];
assign alu_byp_ex3_xer[2] = (ex3_xer_ca_en_q == 1'b1) ? ex3_alu_ca :
ex3_xer_q[2];
assign alu_byp_ex3_xer[3:9] = ex3_xer_q[3:9];
assign alu_byp_ex2_add_rt = ex2_add_rt;
//---------------------------------------------------------------
// Add
//---------------------------------------------------------------
xu_alu_add add(
.nclk(nclk),
.vdd(vdd),
.gnd(gnd),
.delay_lclkr_dc(delay_lclkr_dc),
.mpw1_dc_b(mpw1_dc_b),
.mpw2_dc_b(mpw2_dc_b),
.func_sl_force(func_sl_force),
.func_sl_thold_0_b(func_sl_thold_0_b),
.sg_0(sg_0),
.scan_in(siv[0]),
.scan_out(sov[0]),
.ex1_act(dec_alu_ex1_act),
.ex2_msb_64b_sel(ex2_msb_64b_sel_q),
.dec_alu_ex1_add_rs1_inv(dec_alu_ex1_add_rs1_inv),
.dec_alu_ex2_add_ci(ex2_add_ci),
.ex2_rs1(ex2_add_rs1),
.ex2_rs2(ex2_add_rs2),
.ex2_add_rt(ex2_add_rt),
.ex2_add_ovf(ex2_add_ovf),
.ex2_add_ca(ex2_add_ca)
);
//---------------------------------------------------------------
// Rotate / Logical
//---------------------------------------------------------------
assign ex2_add_ci = (dec_alu_ex2_add_ci_sel == 2'b10) ? byp_alu_ex2_xer[2] :
(dec_alu_ex2_add_ci_sel == 2'b01) ? 1'b1 :
1'b0;
tri_st_rot rot(
.nclk(nclk),
.vdd(vdd),
.gnd(gnd),
.d_mode_dc(d_mode_dc),
.delay_lclkr_dc(delay_lclkr_dc),
.mpw1_dc_b(mpw1_dc_b),
.mpw2_dc_b(mpw2_dc_b),
.func_sl_force(func_sl_force),
.func_sl_thold_0_b(func_sl_thold_0_b),
.sg_0(sg_0),
.scan_in(siv[1]),
.scan_out(sov[1]),
.ex1_act(dec_alu_ex1_act),
.ex1_instr(dec_alu_ex1_instr),
.ex2_isel_fcn(ex2_isel_fcn),
.ex2_sel_rot_log(ex2_sel_rot_log),
// Source Inputs
.ex2_rs0_b(ex2_rot_rs0_b),
.ex2_rs1_b(ex2_rot_rs1_b),
// Other ALU Inputs for muxing
.ex2_alu_rt(ex2_add_rt),
// EX3 Bypass Tap
.ex3_rt(ex3_alu_rt),
.ex2_log_rt(),
// EX2 Bypass Tap (logicals only)
.ex3_xer_ca(ex3_rot_ca),
.ex3_cr_eq()
);
assign ex2_isel_type = {1'b0, (~(byp_alu_ex2_cr_bit)), byp_alu_ex2_cr_bit, 1'b1};
assign ex2_isel_fcn = ex2_sel_isel_q==1'b1 ? ex2_isel_type : 4'b0;
//---------------------------------------------------------------
// Compare / Trap
//---------------------------------------------------------------
xu_alu_cmp cmp(
.nclk(nclk),
.vdd(vdd),
.gnd(gnd),
.d_mode_dc(d_mode_dc),
.delay_lclkr_dc(delay_lclkr_dc),
.mpw1_dc_b(mpw1_dc_b),
.mpw2_dc_b(mpw2_dc_b),
.func_sl_force(func_sl_force),
.func_sl_thold_0_b(func_sl_thold_0_b),
.sg_0(sg_0),
.scan_in(siv[2]),
.scan_out(sov[2]),
.ex2_act(ex2_act_q),
.ex1_msb_64b_sel(dec_alu_ex1_msb_64b_sel),
.ex2_instr(ex2_instr_6to10_q),
.ex2_sel_trap(ex2_sel_trap_q),
.ex2_sel_cmpl(ex2_sel_cmpl_q),
.ex2_sel_cmp(ex2_sel_cmp_q),
.ex2_rs1_00(ex2_add_rs1[msb]),
.ex2_rs1_32(ex2_add_rs1[32]),
.ex2_rs2_00(ex2_add_rs2[msb]),
.ex2_rs2_32(ex2_add_rs2[32]),
.ex3_alu_rt(ex3_alu_rt),
.ex3_add_ca(ex3_add_ca_q),
.ex3_alu_cr(alu_byp_ex3_cr[0:2]),
.ex3_trap_val(alu_dec_ex3_trap_val)
);
//---------------------------------------------------------------
// Latches
//---------------------------------------------------------------
tri_rlmlatch_p #(.INIT(0), .NEEDS_SRESET(1)) ex2_act_latch(
.nclk(nclk),
.vd(vdd),
.gd(gnd),
.act(1'b1),
.force_t(func_sl_force),
.d_mode(d_mode_dc),
.delay_lclkr(delay_lclkr_dc),
.mpw1_b(mpw1_dc_b),
.mpw2_b(mpw2_dc_b),
.thold_b(func_sl_thold_0_b),
.sg(sg_0),
.scin(siv[ex2_act_offset]),
.scout(sov[ex2_act_offset]),
.din(dec_alu_ex1_act),
.dout(ex2_act_q)
);
tri_rlmlatch_p #(.INIT(0), .NEEDS_SRESET(1)) ex2_sel_isel_latch(
.nclk(nclk),
.vd(vdd),
.gd(gnd),
.act(dec_alu_ex1_act),
.force_t(func_sl_force),
.d_mode(d_mode_dc),
.delay_lclkr(delay_lclkr_dc),
.mpw1_b(mpw1_dc_b),
.mpw2_b(mpw2_dc_b),
.thold_b(func_sl_thold_0_b),
.sg(sg_0),
.scin(siv[ex2_sel_isel_offset]),
.scout(sov[ex2_sel_isel_offset]),
.din(dec_alu_ex1_sel_isel),
.dout(ex2_sel_isel_q)
);
tri_rlmlatch_p #(.INIT(0), .NEEDS_SRESET(1)) ex2_msb_64b_sel_latch(
.nclk(nclk),
.vd(vdd),
.gd(gnd),
.act(dec_alu_ex1_act),
.force_t(func_sl_force),
.d_mode(d_mode_dc),
.delay_lclkr(delay_lclkr_dc),
.mpw1_b(mpw1_dc_b),
.mpw2_b(mpw2_dc_b),
.thold_b(func_sl_thold_0_b),
.sg(sg_0),
.scin(siv[ex2_msb_64b_sel_offset]),
.scout(sov[ex2_msb_64b_sel_offset]),
.din(dec_alu_ex1_msb_64b_sel),
.dout(ex2_msb_64b_sel_q)
);
tri_rlmlatch_p #(.INIT(0), .NEEDS_SRESET(1)) ex2_sel_trap_latch(
.nclk(nclk),
.vd(vdd),
.gd(gnd),
.act(dec_alu_ex1_act),
.force_t(func_sl_force),
.d_mode(d_mode_dc),
.delay_lclkr(delay_lclkr_dc),
.mpw1_b(mpw1_dc_b),
.mpw2_b(mpw2_dc_b),
.thold_b(func_sl_thold_0_b),
.sg(sg_0),
.scin(siv[ex2_sel_trap_offset]),
.scout(sov[ex2_sel_trap_offset]),
.din(dec_alu_ex1_sel_trap),
.dout(ex2_sel_trap_q)
);
tri_rlmlatch_p #(.INIT(0), .NEEDS_SRESET(1)) ex2_sel_cmpl_latch(
.nclk(nclk),
.vd(vdd),
.gd(gnd),
.act(dec_alu_ex1_act),
.force_t(func_sl_force),
.d_mode(d_mode_dc),
.delay_lclkr(delay_lclkr_dc),
.mpw1_b(mpw1_dc_b),
.mpw2_b(mpw2_dc_b),
.thold_b(func_sl_thold_0_b),
.sg(sg_0),
.scin(siv[ex2_sel_cmpl_offset]),
.scout(sov[ex2_sel_cmpl_offset]),
.din(dec_alu_ex1_sel_cmpl),
.dout(ex2_sel_cmpl_q)
);
tri_rlmlatch_p #(.INIT(0), .NEEDS_SRESET(1)) ex2_sel_cmp_latch(
.nclk(nclk),
.vd(vdd),
.gd(gnd),
.act(dec_alu_ex1_act),
.force_t(func_sl_force),
.d_mode(d_mode_dc),
.delay_lclkr(delay_lclkr_dc),
.mpw1_b(mpw1_dc_b),
.mpw2_b(mpw2_dc_b),
.thold_b(func_sl_thold_0_b),
.sg(sg_0),
.scin(siv[ex2_sel_cmp_offset]),
.scout(sov[ex2_sel_cmp_offset]),
.din(dec_alu_ex1_sel_cmp),
.dout(ex2_sel_cmp_q)
);
tri_rlmreg_p #(.WIDTH(5), .INIT(0), .NEEDS_SRESET(1)) ex2_instr_6to10_latch(
.nclk(nclk),
.vd(vdd),
.gd(gnd),
.act(dec_alu_ex1_act),
.force_t(func_sl_force),
.d_mode(d_mode_dc),
.delay_lclkr(delay_lclkr_dc),
.mpw1_b(mpw1_dc_b),
.mpw2_b(mpw2_dc_b),
.thold_b(func_sl_thold_0_b),
.sg(sg_0),
.scin(siv[ex2_instr_6to10_offset:ex2_instr_6to10_offset + 5 - 1]),
.scout(sov[ex2_instr_6to10_offset:ex2_instr_6to10_offset + 5 - 1]),
.din(dec_alu_ex1_instr[6:10]),
.dout(ex2_instr_6to10_q)
);
tri_rlmlatch_p #(.INIT(0), .NEEDS_SRESET(1)) ex2_xer_ov_en_latch(
.nclk(nclk),
.vd(vdd),
.gd(gnd),
.act(dec_alu_ex1_act),
.force_t(func_sl_force),
.d_mode(d_mode_dc),
.delay_lclkr(delay_lclkr_dc),
.mpw1_b(mpw1_dc_b),
.mpw2_b(mpw2_dc_b),
.thold_b(func_sl_thold_0_b),
.sg(sg_0),
.scin(siv[ex2_xer_ov_en_offset]),
.scout(sov[ex2_xer_ov_en_offset]),
.din(dec_alu_ex1_xer_ov_en),
.dout(ex2_xer_ov_en_q)
);
tri_rlmlatch_p #(.INIT(0), .NEEDS_SRESET(1)) ex2_xer_ca_en_latch(
.nclk(nclk),
.vd(vdd),
.gd(gnd),
.act(dec_alu_ex1_act),
.force_t(func_sl_force),
.d_mode(d_mode_dc),
.delay_lclkr(delay_lclkr_dc),
.mpw1_b(mpw1_dc_b),
.mpw2_b(mpw2_dc_b),
.thold_b(func_sl_thold_0_b),
.sg(sg_0),
.scin(siv[ex2_xer_ca_en_offset]),
.scout(sov[ex2_xer_ca_en_offset]),
.din(dec_alu_ex1_xer_ca_en),
.dout(ex2_xer_ca_en_q)
);
tri_rlmlatch_p #(.INIT(0), .NEEDS_SRESET(1)) ex3_add_ca_latch(
.nclk(nclk),
.vd(vdd),
.gd(gnd),
.act(ex2_act_q),
.force_t(func_sl_force),
.d_mode(d_mode_dc),
.delay_lclkr(delay_lclkr_dc),
.mpw1_b(mpw1_dc_b),
.mpw2_b(mpw2_dc_b),
.thold_b(func_sl_thold_0_b),
.sg(sg_0),
.scin(siv[ex3_add_ca_offset]),
.scout(sov[ex3_add_ca_offset]),
.din(ex2_add_ca),
.dout(ex3_add_ca_q)
);
tri_rlmlatch_p #(.INIT(0), .NEEDS_SRESET(1)) ex3_add_ovf_latch(
.nclk(nclk),
.vd(vdd),
.gd(gnd),
.act(ex2_act_q),
.force_t(func_sl_force),
.d_mode(d_mode_dc),
.delay_lclkr(delay_lclkr_dc),
.mpw1_b(mpw1_dc_b),
.mpw2_b(mpw2_dc_b),
.thold_b(func_sl_thold_0_b),
.sg(sg_0),
.scin(siv[ex3_add_ovf_offset]),
.scout(sov[ex3_add_ovf_offset]),
.din(ex2_add_ovf),
.dout(ex3_add_ovf_q)
);
tri_rlmlatch_p #(.INIT(0), .NEEDS_SRESET(1)) ex3_sel_rot_log_latch(
.nclk(nclk),
.vd(vdd),
.gd(gnd),
.act(ex2_act_q),
.force_t(func_sl_force),
.d_mode(d_mode_dc),
.delay_lclkr(delay_lclkr_dc),
.mpw1_b(mpw1_dc_b),
.mpw2_b(mpw2_dc_b),
.thold_b(func_sl_thold_0_b),
.sg(sg_0),
.scin(siv[ex3_sel_rot_log_offset]),
.scout(sov[ex3_sel_rot_log_offset]),
.din(ex2_sel_rot_log),
.dout(ex3_sel_rot_log_q)
);
tri_rlmreg_p #(.WIDTH(10), .INIT(0), .NEEDS_SRESET(1)) ex3_xer_latch(
.nclk(nclk),
.vd(vdd),
.gd(gnd),
.act(ex2_act_q),
.force_t(func_sl_force),
.d_mode(d_mode_dc),
.delay_lclkr(delay_lclkr_dc),
.mpw1_b(mpw1_dc_b),
.mpw2_b(mpw2_dc_b),
.thold_b(func_sl_thold_0_b),
.sg(sg_0),
.scin(siv[ex3_xer_offset:ex3_xer_offset + 10 - 1]),
.scout(sov[ex3_xer_offset:ex3_xer_offset + 10 - 1]),
.din(byp_alu_ex2_xer[0:9]),
.dout(ex3_xer_q)
);
tri_rlmlatch_p #(.INIT(0), .NEEDS_SRESET(1)) ex3_xer_ov_en_latch(
.nclk(nclk),
.vd(vdd),
.gd(gnd),
.act(ex2_act_q),
.force_t(func_sl_force),
.d_mode(d_mode_dc),
.delay_lclkr(delay_lclkr_dc),
.mpw1_b(mpw1_dc_b),
.mpw2_b(mpw2_dc_b),
.thold_b(func_sl_thold_0_b),
.sg(sg_0),
.scin(siv[ex3_xer_ov_en_offset]),
.scout(sov[ex3_xer_ov_en_offset]),
.din(ex2_xer_ov_en_q),
.dout(ex3_xer_ov_en_q)
);
tri_rlmlatch_p #(.INIT(0), .NEEDS_SRESET(1)) ex3_xer_ca_en_latch(
.nclk(nclk),
.vd(vdd),
.gd(gnd),
.act(ex2_act_q),
.force_t(func_sl_force),
.d_mode(d_mode_dc),
.delay_lclkr(delay_lclkr_dc),
.mpw1_b(mpw1_dc_b),
.mpw2_b(mpw2_dc_b),
.thold_b(func_sl_thold_0_b),
.sg(sg_0),
.scin(siv[ex3_xer_ca_en_offset]),
.scout(sov[ex3_xer_ca_en_offset]),
.din(ex2_xer_ca_en_q),
.dout(ex3_xer_ca_en_q)
);
assign siv[0:scan_right-1] = {sov[1:scan_right-1], scan_in};
assign scan_out = sov[0];
endmodule