You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

136 lines
5.4 KiB
Verilog

2 years ago
// © IBM Corp. 2020
// Licensed under the Apache License, Version 2.0 (the "License"), as modified by
// the terms below; you may not use the files in this repository except in
// compliance with the License as modified.
// You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0
//
// Modified Terms:
//
// 1) For the purpose of the patent license granted to you in Section 3 of the
// License, the "Work" hereby includes implementations of the work of authorship
// in physical form.
//
// 2) Notwithstanding any terms to the contrary in the License, any licenses
// necessary for implementation of the Work that are available from OpenPOWER
// via the Power ISA End User License Agreement (EULA) are explicitly excluded
// hereunder, and may be obtained from OpenPOWER under the terms and conditions
// of the EULA.
//
// Unless required by applicable law or agreed to in writing, the reference design
// distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
// WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
// for the specific language governing permissions and limitations under the License.
//
// Additional rights, including the ability to physically implement a softcore that
// is compliant with the required sections of the Power ISA Specification, are
// available at no cost under the terms of the OpenPOWER Power ISA EULA, which can be
// obtained (along with the Power ISA) here: https://openpowerfoundation.org.
`timescale 1 ns / 1 ns
// *!****************************************************************
// *! FILENAME : tri_rlmreg_p.v
// *! DESCRIPTION : Multi-bit latch, LCB included
// *!****************************************************************
`include "tri_a2o.vh"
module tri_rlmreg_p(vd, gd, nclk, act, force_t, thold_b, d_mode, sg, delay_lclkr, mpw1_b, mpw2_b, scin, din, scout, dout);
parameter WIDTH = 4;
parameter OFFSET = 0; //starting bit
parameter INIT = 0; // will be converted to the least signficant
// 31 bits of init_v
parameter IBUF = 1'b0; //inverted latch IOs, if set to true.
parameter DUALSCAN = ""; // if "S", marks data ports as scan for Moebius
parameter NEEDS_SRESET = 1; // for inferred latches
parameter DOMAIN_CROSSING = 0;
//wtf trying to fix verilator clock gating bug(?) booting a2o; seeing
parameter ALWAYS_ACT = 0; //wtf 1: override clock gating - can't if truly functional!
inout vd;
inout gd;
input [0:`NCLK_WIDTH-1] nclk;
input act; // 1: functional, 0: no clock
input force_t; // 1: force LCB active
input thold_b; // 1: functional, 0: no clock
input d_mode; // 1: disable pulse mode, 0: pulse mode
input sg; // 0: functional, 1: scan
input delay_lclkr; // 0: functional
input mpw1_b; // pulse width control bit
input mpw2_b; // pulse width control bit
input [OFFSET:OFFSET+WIDTH-1] scin; // scan in
input [OFFSET:OFFSET+WIDTH-1] din; // data in
output [OFFSET:OFFSET+WIDTH-1] scout;
output [OFFSET:OFFSET+WIDTH-1] dout;
/* verilator lint_off WIDTH */
parameter [0:WIDTH-1] init_v = INIT; //wtf causes width mismatch warnings; would have to handle both greater and less than 32 bit cases
/* verilator lint_on WIDTH */
parameter [0:WIDTH-1] ZEROS = {WIDTH{1'b0}};
// tri_rlmreg_p
generate
wire sreset;
wire [0:WIDTH-1] int_din;
reg [0:WIDTH-1] int_dout;
wire [0:WIDTH-1] vact;
wire [0:WIDTH-1] vact_b;
wire [0:WIDTH-1] vsreset;
wire [0:WIDTH-1] vsreset_b;
wire [0:WIDTH-1] vthold;
wire [0:WIDTH-1] vthold_b;
(* analysis_not_referenced="true" *)
wire [0:WIDTH] unused;
if (NEEDS_SRESET == 1)
begin : rst
assign sreset = nclk[1];
end
if (NEEDS_SRESET != 1)
begin : no_rst
assign sreset = 1'b0;
end
assign vsreset = {WIDTH{sreset}};
assign vsreset_b = {WIDTH{~sreset}};
if (IBUF == 1'b1)
begin : cib
assign int_din = (vsreset_b & (~din)) | (vsreset & init_v);
end
if (IBUF == 1'b0)
begin : cnib
assign int_din = (vsreset_b & din) | (vsreset & init_v);
end
assign vact = {WIDTH{act | force_t | ALWAYS_ACT == 1}};
assign vact_b = {WIDTH{~(act | force_t | ALWAYS_ACT == 1)}};
assign vthold_b = {WIDTH{thold_b}};
assign vthold = {WIDTH{~thold_b}};
always @(posedge nclk[0])
begin: l
int_dout <= (((vact & vthold_b) | vsreset) & int_din) | (((vact_b | vthold) & vsreset_b) & int_dout);
end
if (IBUF == 1'b1)
begin : cob
assign dout = (~int_dout);
end
if (IBUF == 1'b0)
begin : cnob
assign dout = int_dout;
end
assign scout = ZEROS;
assign unused[0] = d_mode | sg | delay_lclkr | mpw1_b | mpw2_b | vd | gd | (|nclk);
assign unused[1:WIDTH] = scin;
2 years ago
endgenerate
endmodule