You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
333 lines
8.6 KiB
Verilog
333 lines
8.6 KiB
Verilog
// © IBM Corp. 2020
|
|
// Licensed under the Apache License, Version 2.0 (the "License"), as modified by
|
|
// the terms below; you may not use the files in this repository except in
|
|
// compliance with the License as modified.
|
|
// You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0
|
|
//
|
|
// Modified Terms:
|
|
//
|
|
// 1) For the purpose of the patent license granted to you in Section 3 of the
|
|
// License, the "Work" hereby includes implementations of the work of authorship
|
|
// in physical form.
|
|
//
|
|
// 2) Notwithstanding any terms to the contrary in the License, any licenses
|
|
// necessary for implementation of the Work that are available from OpenPOWER
|
|
// via the Power ISA End User License Agreement (EULA) are explicitly excluded
|
|
// hereunder, and may be obtained from OpenPOWER under the terms and conditions
|
|
// of the EULA.
|
|
//
|
|
// Unless required by applicable law or agreed to in writing, the reference design
|
|
// distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
|
// WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
|
|
// for the specific language governing permissions and limitations under the License.
|
|
//
|
|
// Additional rights, including the ability to physically implement a softcore that
|
|
// is compliant with the required sections of the Power ISA Specification, are
|
|
// available at no cost under the terms of the OpenPOWER Power ISA EULA, which can be
|
|
// obtained (along with the Power ISA) here: https://openpowerfoundation.org.
|
|
|
|
`timescale 1 ns / 1 ns
|
|
|
|
// *********************************************************************
|
|
//
|
|
// This is the ENTITY for fu_perv
|
|
//
|
|
// *********************************************************************
|
|
|
|
`include "tri_a2o.vh"
|
|
|
|
module fu_perv(
|
|
vdd,
|
|
gnd,
|
|
nclk,
|
|
pc_fu_sg_3,
|
|
pc_fu_abst_sl_thold_3,
|
|
pc_fu_func_sl_thold_3,
|
|
pc_fu_func_slp_sl_thold_3,
|
|
pc_fu_gptr_sl_thold_3,
|
|
pc_fu_time_sl_thold_3,
|
|
pc_fu_ary_nsl_thold_3,
|
|
pc_fu_cfg_sl_thold_3,
|
|
pc_fu_repr_sl_thold_3,
|
|
pc_fu_fce_3,
|
|
tc_ac_ccflush_dc,
|
|
tc_ac_scan_diag_dc,
|
|
abst_sl_thold_1,
|
|
func_sl_thold_1,
|
|
time_sl_thold_1,
|
|
ary_nsl_thold_1,
|
|
cfg_sl_thold_1,
|
|
gptr_sl_thold_0,
|
|
func_slp_sl_thold_1,
|
|
fce_1,
|
|
sg_1,
|
|
clkoff_dc_b,
|
|
act_dis,
|
|
delay_lclkr_dc,
|
|
mpw1_dc_b,
|
|
mpw2_dc_b,
|
|
repr_scan_in,
|
|
repr_scan_out,
|
|
gptr_scan_in,
|
|
gptr_scan_out
|
|
);
|
|
inout vdd;
|
|
inout gnd;
|
|
|
|
input [0:`NCLK_WIDTH-1] nclk;
|
|
input [0:1] pc_fu_sg_3;
|
|
input pc_fu_abst_sl_thold_3;
|
|
input [0:1] pc_fu_func_sl_thold_3;
|
|
input [0:1] pc_fu_func_slp_sl_thold_3;
|
|
input pc_fu_gptr_sl_thold_3;
|
|
input pc_fu_time_sl_thold_3;
|
|
input pc_fu_ary_nsl_thold_3;
|
|
input pc_fu_cfg_sl_thold_3;
|
|
input pc_fu_repr_sl_thold_3;
|
|
input pc_fu_fce_3;
|
|
input tc_ac_ccflush_dc;
|
|
input tc_ac_scan_diag_dc;
|
|
output abst_sl_thold_1;
|
|
output [0:1] func_sl_thold_1;
|
|
output time_sl_thold_1;
|
|
output ary_nsl_thold_1;
|
|
output cfg_sl_thold_1;
|
|
output gptr_sl_thold_0;
|
|
output func_slp_sl_thold_1;
|
|
|
|
output fce_1;
|
|
output [0:1] sg_1;
|
|
output clkoff_dc_b;
|
|
output act_dis;
|
|
output [0:9] delay_lclkr_dc;
|
|
output [0:9] mpw1_dc_b;
|
|
output [0:1] mpw2_dc_b;
|
|
input repr_scan_in; //tc_ac_repr_scan_in(2)
|
|
output repr_scan_out; //tc_ac_repr_scan_in(2)
|
|
input gptr_scan_in;
|
|
output gptr_scan_out;
|
|
|
|
//--
|
|
|
|
wire abst_sl_thold_2;
|
|
wire time_sl_thold_2;
|
|
wire [0:1] func_sl_thold_2;
|
|
wire func_slp_sl_thold_2;
|
|
|
|
wire gptr_sl_thold_0_int;
|
|
|
|
|
|
|
|
wire gptr_sl_thold_2;
|
|
wire ary_nsl_thold_2;
|
|
wire cfg_sl_thold_2;
|
|
wire repr_sl_thold_2;
|
|
|
|
wire [0:1] sg_2;
|
|
wire fce_2;
|
|
|
|
wire gptr_sl_thold_1;
|
|
wire repr_sl_thold_1;
|
|
wire [0:1] sg_1_int;
|
|
|
|
|
|
wire repr_sl_thold_0;
|
|
wire repr_sl_force;
|
|
wire repr_sl_thold_0_b;
|
|
wire repr_in;
|
|
wire repr_UNUSED;
|
|
|
|
(* analysis_not_assigned="true" *)
|
|
(* analysis_not_referenced="true" *)
|
|
wire spare_unused;
|
|
|
|
wire sg_0;
|
|
wire gptr_sio;
|
|
wire [0:9] prv_delay_lclkr_dc;
|
|
wire [0:9] prv_mpw1_dc_b;
|
|
wire [0:1] prv_mpw2_dc_b;
|
|
wire prv_act_dis;
|
|
wire prv_clkoff_dc_b;
|
|
wire tihi;
|
|
wire tiup;
|
|
|
|
assign tihi = 1'b1;
|
|
assign tiup = 1'b1;
|
|
|
|
|
|
tri_plat #(.WIDTH(12)) perv_3to2_reg(
|
|
.vd(vdd),
|
|
.gd(gnd),
|
|
.nclk(nclk),
|
|
.flush(tc_ac_ccflush_dc),
|
|
|
|
.din({
|
|
pc_fu_func_sl_thold_3[0:1],
|
|
pc_fu_gptr_sl_thold_3,
|
|
pc_fu_abst_sl_thold_3,
|
|
pc_fu_sg_3[0:1],
|
|
pc_fu_time_sl_thold_3,
|
|
pc_fu_fce_3,
|
|
pc_fu_ary_nsl_thold_3,
|
|
pc_fu_cfg_sl_thold_3,
|
|
pc_fu_repr_sl_thold_3,
|
|
pc_fu_func_slp_sl_thold_3[0]}),
|
|
|
|
.q({
|
|
func_sl_thold_2[0:1],
|
|
gptr_sl_thold_2,
|
|
abst_sl_thold_2,
|
|
sg_2[0:1],
|
|
time_sl_thold_2,
|
|
fce_2,
|
|
ary_nsl_thold_2,
|
|
cfg_sl_thold_2,
|
|
repr_sl_thold_2,
|
|
func_slp_sl_thold_2})
|
|
);
|
|
|
|
|
|
tri_plat #(.WIDTH(12)) perv_2to1_reg(
|
|
.vd(vdd),
|
|
.gd(gnd),
|
|
.nclk(nclk),
|
|
.flush(tc_ac_ccflush_dc),
|
|
|
|
.din({
|
|
func_sl_thold_2[0:1],
|
|
gptr_sl_thold_2,
|
|
abst_sl_thold_2,
|
|
sg_2[0:1],
|
|
time_sl_thold_2,
|
|
fce_2,
|
|
ary_nsl_thold_2,
|
|
cfg_sl_thold_2,
|
|
repr_sl_thold_2,
|
|
func_slp_sl_thold_2}),
|
|
|
|
.q({
|
|
func_sl_thold_1[0:1],
|
|
gptr_sl_thold_1,
|
|
abst_sl_thold_1,
|
|
sg_1_int[0:1],
|
|
time_sl_thold_1,
|
|
fce_1,
|
|
ary_nsl_thold_1,
|
|
cfg_sl_thold_1,
|
|
repr_sl_thold_1,
|
|
func_slp_sl_thold_1})
|
|
);
|
|
|
|
assign sg_1[0:1] = sg_1_int[0:1];
|
|
|
|
|
|
tri_plat #(.WIDTH(3)) perv_1to0_reg(
|
|
.vd(vdd),
|
|
.gd(gnd),
|
|
.nclk(nclk),
|
|
.flush(tc_ac_ccflush_dc),
|
|
.din({ gptr_sl_thold_1,
|
|
sg_1_int[0],
|
|
repr_sl_thold_1}),
|
|
|
|
.q({ gptr_sl_thold_0_int,
|
|
sg_0,
|
|
repr_sl_thold_0})
|
|
);
|
|
|
|
assign gptr_sl_thold_0 = gptr_sl_thold_0_int;
|
|
|
|
// Pipeline mapping of mpw1_b and delay_lclkr, mpw2_b
|
|
// RF0 8 1
|
|
// RF1 0 0
|
|
// EX1 1 0
|
|
// EX2 2 0
|
|
// EX3 3 0
|
|
// EX4 4 0
|
|
// EX5 5 1
|
|
// EX6 6 1
|
|
// EX7 7 1
|
|
// Ctrl 9 1
|
|
|
|
tri_lcbcntl_mac perv_lcbctrl0(
|
|
.vdd(vdd),
|
|
.gnd(gnd),
|
|
.sg(sg_0),
|
|
.nclk(nclk),
|
|
.scan_in(gptr_scan_in),
|
|
.scan_diag_dc(tc_ac_scan_diag_dc),
|
|
.thold(gptr_sl_thold_0_int),
|
|
.clkoff_dc_b(prv_clkoff_dc_b),
|
|
.delay_lclkr_dc(prv_delay_lclkr_dc[0:4]),
|
|
.act_dis_dc(),
|
|
.mpw1_dc_b(prv_mpw1_dc_b[0:4]),
|
|
.mpw2_dc_b(prv_mpw2_dc_b[0]),
|
|
.scan_out(gptr_sio)
|
|
);
|
|
|
|
|
|
tri_lcbcntl_mac perv_lcbctrl1(
|
|
.vdd(vdd),
|
|
.gnd(gnd),
|
|
.sg(sg_0),
|
|
.nclk(nclk),
|
|
.scan_in(gptr_sio),
|
|
.scan_diag_dc(tc_ac_scan_diag_dc),
|
|
.thold(gptr_sl_thold_0_int),
|
|
.clkoff_dc_b(),
|
|
.delay_lclkr_dc(prv_delay_lclkr_dc[5:9]),
|
|
.act_dis_dc(),
|
|
.mpw1_dc_b(prv_mpw1_dc_b[5:9]),
|
|
.mpw2_dc_b(prv_mpw2_dc_b[1]),
|
|
.scan_out(gptr_scan_out)
|
|
);
|
|
|
|
//Outputs
|
|
assign delay_lclkr_dc[0:9] = prv_delay_lclkr_dc[0:9];
|
|
assign mpw1_dc_b[0:9] = prv_mpw1_dc_b[0:9];
|
|
assign mpw2_dc_b[0:1] = prv_mpw2_dc_b[0:1];
|
|
|
|
//never disable act pins, they are used functionally
|
|
assign prv_act_dis = 1'b0;
|
|
assign act_dis = prv_act_dis;
|
|
assign clkoff_dc_b = prv_clkoff_dc_b;
|
|
|
|
// Repower latch for repr scan ins/outs
|
|
|
|
tri_lcbor repr_sl_lcbor_0(
|
|
.clkoff_b(prv_clkoff_dc_b),
|
|
.thold(repr_sl_thold_0),
|
|
.sg(sg_0),
|
|
.act_dis(prv_act_dis),
|
|
.force_t(repr_sl_force),
|
|
.thold_b(repr_sl_thold_0_b)
|
|
);
|
|
|
|
assign repr_in = 1'b0;
|
|
|
|
tri_rlmreg_p #(.INIT(0), .WIDTH(1)) repr_rpwr_lat(
|
|
.nclk(nclk),
|
|
.act(tihi),
|
|
.force_t(repr_sl_force),
|
|
.d_mode(tiup),
|
|
.delay_lclkr(prv_delay_lclkr_dc[9]),
|
|
.mpw1_b(prv_mpw1_dc_b[9]),
|
|
.mpw2_b(prv_mpw2_dc_b[1]),
|
|
.thold_b(repr_sl_thold_0_b),
|
|
.sg(sg_0),
|
|
.vd(vdd),
|
|
.gd(gnd),
|
|
.scin(repr_scan_in),
|
|
.scout(repr_scan_out),
|
|
//-------------------------------------------
|
|
.din(repr_in),
|
|
//-------------------------------------------
|
|
.dout(repr_UNUSED)
|
|
);
|
|
|
|
// Unused logic
|
|
assign spare_unused = pc_fu_func_slp_sl_thold_3[1];
|
|
|
|
|
|
endmodule
|