You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
openpowerwtf cb04a607db verilator litex soc 2 years ago
..
cmod7_kintex_main_ram.init verilator litex soc 2 years ago
cmod7_kintex_mem.init verilator litex soc 2 years ago
cmod7_kintex_rom.init verilator litex soc 2 years ago
cmod7_kintex_sram.init verilator litex soc 2 years ago
readme.md verilator litex soc 2 years ago
sim.txt verilator: st credits 2 years ago
soc.v verilator litex soc 2 years ago
tb.cpp verilator debug 2 years ago
tb_litex.cpp verilator litex soc 2 years ago
tb_litex_soc.cpp verilator litex soc 2 years ago
tb_node.cpp update 2 years ago
verilator-v224-82-debug.txt verilator debug 2 years ago
verilator.txt verilator: st credits 2 years ago
verilog verilator debug 2 years ago

readme.md

Verilator

  • verilator now successfully runs, once the nclk[] changes were completed to separate clk and rst, and remove lcb's driving lclk's

a2o w/WB wrapper

verilator -cc  --exe --trace --Mdir obj_dir --language 1364-2001 -Wno-fatal -Wno-LITENDIAN --error-limit 1  -Iverilog/a2o_litex -Iverilog/work -Iverilog/trilib -Iverilog/unisims a2owb.v tb_litex.cpp |& tee verilator.txt
make -C obj_dir -f Va2owb.mk Va2owb
obj_dir/Va2owb

  • about 5 non-scan UNOPTFLATs

Litex SOC

  • full SOC also runs; now need to add uart to tb and more code to get to litex terminal
top=cmod7_kintex
build=../../build/litex/build/$top/gateware
# keep consistent naming
mod=soc
cp $build/$top.v $mod.v
sed -i "s/module $top/module $mod/" $mod.v

# don't absolutely need this? soc will reset itself; also, csr can reset
# make public - would be nice to do these with a --publics <file>
sed -i 's#reg  soc_rst =.*;#reg  soc_rst /*verilator public*/ = 0;#' $mod.v

# verilog loads a rom init file; gen'd during soc build or externally
# test3 copies tst to @10000; ALSO! the tst wrapper has to be loaded into ram space since it has save/restore areas.
#cp $build/${top}_rom.init . #LE
cp ../mem/test3/rom_soc.init ${top}_rom.init #BE
touch ${top}_mem.init         # csr
touch ${top}_sram.init        # on-board
touch ${top}_main_ram.init    # ext

verilator -cc  --exe --trace --Mdir obj_dir_$mod --language 1364-2001 -Wno-fatal -Wno-LITENDIAN --error-limit 1 -I$. -Iverilog/a2o_litex -Iverilog/work -Iverilog/trilib -Iverilog/unisims -Iverilog/unisims_soc $mod tb_litex_$mod.cpp |& tee verilator_$mod.txt

make -C obj_dir_$mod -f V$mod.mk V$mod
obj_dir_$mod/V$mod | tee sim_soc.txt
vcd2fst a2olitex.vcd soc.fst
rm a2olitex.vcd
gtkwave soc.fst soc.gtkw
first try
  • runs until last completion of 134C???
00001338 <tst_cleanup>:
    1338:	3c 60 00 00 	lis     r3,0
    133c:	60 63 10 60 	ori     r3,r3,4192
    1340:	80 23 00 9c 	lwz     r1,156(r3)
    1344:	3c 60 08 67 	lis     r3,2151
    1348:	60 63 53 09 	ori     r3,r3,21257
    134c:	48 00 0e 0f 	bla     e0c <tst_done>

00000e0c <tst_done>:
     e0c:	94 21 ff e0 	stwu    r1,-32(r1)

  • bumped stopOnHang to 500 cycles and it does complete 1C0 after 134C. dsi on stwu. dear=FFFFFFE0. that is suspiciously identical to 0-32. what is trying to be read from @1060 to set r1??? that is in rom space. the tst wrapper is being linked into rom and not relocated! it should probably use a linker-gen'd pointer to use for its r/w data space. but wouldn't generally be building a tst into rom.
second try
  • changed linker.ld to put tst in .data so it's copied by bios to ram...
00024966 C0: CP 0:000FD8 0000000000000FD8
00024983 C0: CP 0:000FDC 1:000FE0 0000000000000FDC
00024985 C0: CP 0:000FE4 1:000FF4 0000000000000FE4
00024986 C0: CP 0:000FF8 1:000FFC 0000000000000FF8
00025000 ...tick...
00025005 C0: CP 0:001000 0000000000001000
00025006 C0: CP 0:001004 0000000000001004
00025008 C0: CP 0:001008 0000000000001008
00025022 C0: CP 0:00100C 000000000000100C
00025071 C0: CP 0:0007F0 00000000000007F0
*** Passing IAR detected ***


tb_litex_soc

Cycles run=25074

You has opulence.

Experiments

core-only initial experiment

verilator -cc --exe --trace --Mdir obj_dir --language 1364-2001 -Wno-fatal -Wno-LITENDIAN --error-limit 1 -Iverilog/work -Iverilog/trilib_clk1x -Iverilog/trilib -Iverilog/unisims c.v tb.cpp

make -C obj_dir -f Vc.mk Vc
obj_dir/Vc

core + node (extmem version)

verilator -cc --exe --trace --Mdir obj_dir --language 1364-2001 -Wno-fatal -Wno-LITENDIAN --error-limit 1  -Iverilog/work -Iverilog/trilib_clk1x -Iverilog/trilib -Iverilog/unisims -Iverilog/a2node a2owb.v tb_node.cpp

make -C obj_dir -f Va2owb.mk Va2owb
obj_dir/Va2owb
  • doesn't work (test3/mem.init), which does work for coccotb/icarus
  • tid compare at start looks like it's using wrong value (imm from following bc?) and erat code is skipped

core + node wb (litex)

  • verilog/a2onode_litex
verilator -cc --exe --trace --Mdir obj_dir --language 1364-2001 -Wno-fatal -Wno-LITENDIAN --error-limit 1  -Iverilog/a2o_litex -Iverilog/work -Iverilog/trilib_clk1x -Iverilog/trilib -Iverilog/unisims a2owb.v tb_litex.cpp

make -C obj_dir -f Va2owb.mk Va2owb
obj_dir/Va2owb
  • debugged several fails near start of test (in issues) - first few are cases of ff behaving incorrectly; syntax changes in trilib got to reaching i=1 ifetches
  • added CP signals to track completions (/verilator public/) and now first isync fails (flushes to @04)

Verilator Debug

Old Stuff
  • install multiple versions concurrently
git pull
git checkout master
#..or...
#git checkout stable
#git checkout vxxx

unset VERILATOR_ROOT
export VERILATOR_VERSION=`git describe | sed "s/verilator_//"`
./configure --prefix /tools/verilator/$VERILATOR_VERSION
make -j <n>
make install
cp -r include /tools/verilator/$VERILATOR_VERSION   # had to do this too

# symlink
ln -sf /tools/verilator/$VERILATOR_VERSION /tools/verilator/latest
  • pick and run...
export VERILATOR_ROOT=/tools/verilator/latest

# rm -r obj_dir   # to be safe?
verilator -cc --exe --trace --Mdir obj_dir --language 1364-2001 -Wno-fatal -Wno-LITENDIAN --error-limit 1  -Iverilog/a2o_litex -Iverilog/work -Iverilog/trilib_clk1x -Iverilog/trilib -Iverilog/unisims a2owb.v tb_litex.cpp

make -C obj_dir -f Va2owb.mk Va2owb
obj_dir/Va2owb

Try different versions with same RTL

  • rtl and tb_litex.cpp
git log | head -1
commit 7cbbf9f3844a9287c5fac88867bcbcd5739914cf
  • export VERILATOR_ROOT=/tools/verilator/v4.106

  • #define OLD_PUBLIC in tb_litex.cpp

  • the ifetch is bad, but so are the completes a little before it; @42C=eratwe r8,r0,0

...

00000250 Completed: I0:1 000000000000042C
00000262 WB RD RA=00000460
00000263 WB RD ACK RA=00000460 DATA=7D4011A6
00000264 WB RD RA=00000464
00000265 WB RD ACK RA=00000464 DATA=7C8009A6
00000266 WB RD RA=00000468
00000267 WB RD ACK RA=00000468 DATA=7D0001A6
00000268 WB RD RA=0000046C
00000269 WB RD ACK RA=0000046C DATA=4C00012C
00000272 Completed: I0:1 0000000000000000 I1:1 0000000000000000
00000286 WB RD RA=00000000
*** Fetch to boot address (00000000) after initial boot! ***
  • export VERILATOR_ROOT=/tools/verilator/v4.204
00000250 Completed: I0:1 000000000000042C
00000262 WB RD RA=00000460
00000263 WB RD ACK RA=00000460 DATA=7D4011A6
00000264 WB RD RA=00000464
00000265 WB RD ACK RA=00000464 DATA=7C8009A6
00000266 WB RD RA=00000468
00000267 WB RD ACK RA=00000468 DATA=7D0001A6
00000268 WB RD RA=0000046C
00000269 WB RD ACK RA=0000046C DATA=4C00012C
00000272 Completed: I0:1 0000000000000000 I1:1 0000000000000000
00000286 WB RD RA=00000000
*** Fetch to boot address (00000000) after initial boot! ***
  • export VERILATOR_ROOT=/tools/verilator/stable (v4.224-26-g8b7480806)
00000250 Completed: I0:1 000000000000042C
00000262 WB RD RA=00000460
00000263 WB RD ACK RA=00000460 DATA=7D4011A6
00000264 WB RD RA=00000464
00000265 WB RD ACK RA=00000464 DATA=7C8009A6
00000266 WB RD RA=00000468
00000267 WB RD ACK RA=00000468 DATA=7D0001A6
00000268 WB RD RA=0000046C
00000269 WB RD ACK RA=0000046C DATA=4C00012C
00000272 Completed: I0:1 0000000000000000 I1:1 0000000000000000
00000286 WB RD RA=00000000
*** Fetch to boot address (00000000) after initial boot! ***
  • export VERILATOR_ROOT=/tools/verilator/latest (v4.224-82-gcbe1b8e26)
%Error: Verilator internal fault, sorry. Suggest trying --debug --gdbbt
%Error: Command Failed /tools/verilator/latest/bin/verilator_bin -cc --exe --trace --Mdir obj_dir --language 1364-2001 -Wno-fatal -Wno-LITENDIAN --error-limit 1 -Iverilog/a2o_litex -Iverilog/work -I

verilator -cc --debug --gddbt--exe --trace --Mdir obj_dir --language 1364-2001 -Wno-fatal -Wno-LITENDIAN --error-limit 1  -Iverilog/a2o_litex -Iverilog/work -Iverilog/trilib_clk1x -Iverilog/trilib -Iverilog/unisims a2owb.v tb_litex.cpp  |& tee verilator-v224-82-debug.txt