You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
microwatt/fpu.vhdl

1112 lines
42 KiB
VHDL

-- Floating-point unit for Microwatt
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
library work;
use work.insn_helpers.all;
use work.decode_types.all;
use work.crhelpers.all;
use work.helpers.all;
use work.common.all;
entity fpu is
port (
clk : in std_ulogic;
rst : in std_ulogic;
e_in : in Execute1toFPUType;
e_out : out FPUToExecute1Type;
w_out : out FPUToWritebackType
);
end entity fpu;
architecture behaviour of fpu is
type fp_number_class is (ZERO, FINITE, INFINITY, NAN);
constant EXP_BITS : natural := 13;
type fpu_reg_type is record
class : fp_number_class;
negative : std_ulogic;
exponent : signed(EXP_BITS-1 downto 0); -- unbiased
mantissa : std_ulogic_vector(63 downto 0); -- 10.54 format
end record;
type state_t is (IDLE,
DO_MCRFS, DO_MTFSB, DO_MTFSFI, DO_MFFS, DO_MTFSF,
DO_FMR, DO_FMRG,
DO_FCFID, DO_FCTI,
DO_FRSP, DO_FRI,
FRI_1,
INT_SHIFT, INT_ROUND, INT_ISHIFT,
INT_FINAL, INT_CHECK, INT_OFLOW,
FINISH, NORMALIZE,
ROUND_UFLOW, ROUND_OFLOW,
ROUNDING, ROUNDING_2, ROUNDING_3,
DENORM);
type reg_type is record
state : state_t;
busy : std_ulogic;
instr_done : std_ulogic;
do_intr : std_ulogic;
op : insn_type_t;
insn : std_ulogic_vector(31 downto 0);
dest_fpr : gspr_index_t;
fe_mode : std_ulogic;
rc : std_ulogic;
is_cmp : std_ulogic;
single_prec : std_ulogic;
fpscr : std_ulogic_vector(31 downto 0);
a : fpu_reg_type;
b : fpu_reg_type;
r : std_ulogic_vector(63 downto 0); -- 10.54 format
x : std_ulogic;
result_sign : std_ulogic;
result_class : fp_number_class;
result_exp : signed(EXP_BITS-1 downto 0);
shift : signed(EXP_BITS-1 downto 0);
writing_back : std_ulogic;
int_result : std_ulogic;
cr_result : std_ulogic_vector(3 downto 0);
cr_mask : std_ulogic_vector(7 downto 0);
old_exc : std_ulogic_vector(4 downto 0);
update_fprf : std_ulogic;
quieten_nan : std_ulogic;
tiny : std_ulogic;
denorm : std_ulogic;
round_mode : std_ulogic_vector(2 downto 0);
end record;
signal r, rin : reg_type;
signal fp_result : std_ulogic_vector(63 downto 0);
signal opsel_a : std_ulogic_vector(1 downto 0);
signal opsel_b : std_ulogic_vector(1 downto 0);
signal opsel_r : std_ulogic_vector(1 downto 0);
signal opsel_ainv : std_ulogic;
signal opsel_amask : std_ulogic;
signal in_a : std_ulogic_vector(63 downto 0);
signal in_b : std_ulogic_vector(63 downto 0);
signal result : std_ulogic_vector(63 downto 0);
signal carry_in : std_ulogic;
signal lost_bits : std_ulogic;
signal r_hi_nz : std_ulogic;
signal r_lo_nz : std_ulogic;
signal misc_sel : std_ulogic_vector(3 downto 0);
-- opsel values
constant AIN_R : std_ulogic_vector(1 downto 0) := "00";
constant AIN_A : std_ulogic_vector(1 downto 0) := "01";
constant AIN_B : std_ulogic_vector(1 downto 0) := "10";
constant BIN_ZERO : std_ulogic_vector(1 downto 0) := "00";
constant BIN_R : std_ulogic_vector(1 downto 0) := "01";
constant BIN_MASK : std_ulogic_vector(1 downto 0) := "10";
constant RES_SUM : std_ulogic_vector(1 downto 0) := "00";
constant RES_SHIFT : std_ulogic_vector(1 downto 0) := "01";
constant RES_MISC : std_ulogic_vector(1 downto 0) := "11";
-- Left and right shifter with 120 bit input and 64 bit output.
-- Shifts inp left by shift bits and returns the upper 64 bits of
-- the result. The shift parameter is interpreted as a signed
-- number in the range -64..63, with negative values indicating
-- right shifts.
function shifter_64(inp: std_ulogic_vector(119 downto 0);
shift: std_ulogic_vector(6 downto 0))
return std_ulogic_vector is
variable s1 : std_ulogic_vector(94 downto 0);
variable s2 : std_ulogic_vector(70 downto 0);
variable result : std_ulogic_vector(63 downto 0);
begin
case shift(6 downto 5) is
when "00" =>
s1 := inp(119 downto 25);
when "01" =>
s1 := inp(87 downto 0) & "0000000";
when "10" =>
s1 := x"0000000000000000" & inp(119 downto 89);
when others =>
s1 := x"00000000" & inp(119 downto 57);
end case;
case shift(4 downto 3) is
when "00" =>
s2 := s1(94 downto 24);
when "01" =>
s2 := s1(86 downto 16);
when "10" =>
s2 := s1(78 downto 8);
when others =>
s2 := s1(70 downto 0);
end case;
case shift(2 downto 0) is
when "000" =>
result := s2(70 downto 7);
when "001" =>
result := s2(69 downto 6);
when "010" =>
result := s2(68 downto 5);
when "011" =>
result := s2(67 downto 4);
when "100" =>
result := s2(66 downto 3);
when "101" =>
result := s2(65 downto 2);
when "110" =>
result := s2(64 downto 1);
when others =>
result := s2(63 downto 0);
end case;
return result;
end;
-- Generate a mask with 0-bits on the left and 1-bits on the right which
-- selects the bits will be lost in doing a right shift. The shift
-- parameter is the bottom 6 bits of a negative shift count,
-- indicating a right shift.
function right_mask(shift: unsigned(5 downto 0)) return std_ulogic_vector is
variable result: std_ulogic_vector(63 downto 0);
begin
result := (others => '0');
for i in 0 to 63 loop
if i >= shift then
result(63 - i) := '1';
end if;
end loop;
return result;
end;
-- Split a DP floating-point number into components and work out its class.
-- If is_int = 1, the input is considered an integer
function decode_dp(fpr: std_ulogic_vector(63 downto 0); is_int: std_ulogic) return fpu_reg_type is
variable r : fpu_reg_type;
variable exp_nz : std_ulogic;
variable exp_ao : std_ulogic;
variable frac_nz : std_ulogic;
variable cls : std_ulogic_vector(2 downto 0);
begin
r.negative := fpr(63);
exp_nz := or (fpr(62 downto 52));
exp_ao := and (fpr(62 downto 52));
frac_nz := or (fpr(51 downto 0));
if is_int = '0' then
r.exponent := signed(resize(unsigned(fpr(62 downto 52)), EXP_BITS)) - to_signed(1023, EXP_BITS);
if exp_nz = '0' then
r.exponent := to_signed(-1022, EXP_BITS);
end if;
r.mantissa := "000000000" & exp_nz & fpr(51 downto 0) & "00";
cls := exp_ao & exp_nz & frac_nz;
case cls is
when "000" => r.class := ZERO;
when "001" => r.class := FINITE; -- denormalized
when "010" => r.class := FINITE;
when "011" => r.class := FINITE;
when "110" => r.class := INFINITY;
when others => r.class := NAN;
end case;
else
r.mantissa := fpr;
r.exponent := (others => '0');
if (fpr(63) or exp_nz or frac_nz) = '1' then
r.class := FINITE;
else
r.class := ZERO;
end if;
end if;
return r;
end;
-- Construct a DP floating-point result from components
function pack_dp(sign: std_ulogic; class: fp_number_class; exp: signed(EXP_BITS-1 downto 0);
mantissa: std_ulogic_vector; single_prec: std_ulogic; quieten_nan: std_ulogic)
return std_ulogic_vector is
variable result : std_ulogic_vector(63 downto 0);
begin
result := (others => '0');
result(63) := sign;
case class is
when ZERO =>
when FINITE =>
if mantissa(54) = '1' then
-- normalized number
result(62 downto 52) := std_ulogic_vector(resize(exp, 11) + 1023);
end if;
result(51 downto 29) := mantissa(53 downto 31);
if single_prec = '0' then
result(28 downto 0) := mantissa(30 downto 2);
end if;
when INFINITY =>
result(62 downto 52) := "11111111111";
when NAN =>
result(62 downto 52) := "11111111111";
result(51) := quieten_nan or mantissa(53);
result(50 downto 29) := mantissa(52 downto 31);
if single_prec = '0' then
result(28 downto 0) := mantissa(30 downto 2);
end if;
end case;
return result;
end;
-- Determine whether to increment when rounding
-- Returns rounding_inc & inexact
-- Assumes x includes the bottom 29 bits of the mantissa already
-- if single_prec = 1 (usually arranged by setting set_x = 1 earlier).
function fp_rounding(mantissa: std_ulogic_vector(63 downto 0); x: std_ulogic;
single_prec: std_ulogic; rn: std_ulogic_vector(2 downto 0);
sign: std_ulogic)
return std_ulogic_vector is
variable grx : std_ulogic_vector(2 downto 0);
variable ret : std_ulogic_vector(1 downto 0);
variable lsb : std_ulogic;
begin
if single_prec = '0' then
grx := mantissa(1 downto 0) & x;
lsb := mantissa(2);
else
grx := mantissa(30 downto 29) & x;
lsb := mantissa(31);
end if;
ret(1) := '0';
ret(0) := or (grx);
case rn(1 downto 0) is
when "00" => -- round to nearest
if grx = "100" and rn(2) = '0' then
ret(1) := lsb; -- tie, round to even
else
ret(1) := grx(2);
end if;
when "01" => -- round towards zero
when others => -- round towards +/- inf
if rn(0) = sign then
-- round towards greater magnitude
ret(1) := ret(0);
end if;
end case;
return ret;
end;
-- Determine result flags to write into the FPSCR
function result_flags(sign: std_ulogic; class: fp_number_class; unitbit: std_ulogic)
return std_ulogic_vector is
begin
case class is
when ZERO =>
return sign & "0010";
when FINITE =>
return (not unitbit) & sign & (not sign) & "00";
when INFINITY =>
return '0' & sign & (not sign) & "01";
when NAN =>
return "10001";
end case;
end;
begin
fpu_0: process(clk)
begin
if rising_edge(clk) then
if rst = '1' then
r.state <= IDLE;
r.busy <= '0';
r.instr_done <= '0';
r.do_intr <= '0';
r.fpscr <= (others => '0');
r.writing_back <= '0';
else
assert not (r.state /= IDLE and e_in.valid = '1') severity failure;
r <= rin;
end if;
end if;
end process;
e_out.busy <= r.busy;
e_out.exception <= r.fpscr(FPSCR_FEX);
e_out.interrupt <= r.do_intr;
w_out.valid <= r.instr_done and not r.do_intr;
w_out.write_enable <= r.writing_back;
w_out.write_reg <= r.dest_fpr;
w_out.write_data <= fp_result;
w_out.write_cr_enable <= r.instr_done and (r.rc or r.is_cmp);
w_out.write_cr_mask <= r.cr_mask;
w_out.write_cr_data <= r.cr_result & r.cr_result & r.cr_result & r.cr_result &
r.cr_result & r.cr_result & r.cr_result & r.cr_result;
fpu_1: process(all)
variable v : reg_type;
variable adec : fpu_reg_type;
variable bdec : fpu_reg_type;
variable fpscr_mask : std_ulogic_vector(31 downto 0);
variable illegal : std_ulogic;
variable j, k : integer;
variable flm : std_ulogic_vector(7 downto 0);
variable int_input : std_ulogic;
variable mask : std_ulogic_vector(63 downto 0);
variable in_a0 : std_ulogic_vector(63 downto 0);
variable in_b0 : std_ulogic_vector(63 downto 0);
variable misc : std_ulogic_vector(63 downto 0);
variable shift_res : std_ulogic_vector(63 downto 0);
variable round : std_ulogic_vector(1 downto 0);
variable update_fx : std_ulogic;
variable arith_done : std_ulogic;
variable invalid : std_ulogic;
variable mant_nz : std_ulogic;
variable min_exp : signed(EXP_BITS-1 downto 0);
variable max_exp : signed(EXP_BITS-1 downto 0);
variable bias_exp : signed(EXP_BITS-1 downto 0);
variable new_exp : signed(EXP_BITS-1 downto 0);
variable exp_tiny : std_ulogic;
variable exp_huge : std_ulogic;
variable renormalize : std_ulogic;
variable clz : std_ulogic_vector(5 downto 0);
variable set_x : std_ulogic;
variable mshift : signed(EXP_BITS-1 downto 0);
variable need_check : std_ulogic;
variable msb : std_ulogic;
begin
v := r;
illegal := '0';
v.busy := '0';
int_input := '0';
-- capture incoming instruction
if e_in.valid = '1' then
v.insn := e_in.insn;
v.op := e_in.op;
v.fe_mode := or (e_in.fe_mode);
v.dest_fpr := e_in.frt;
v.single_prec := e_in.single;
v.int_result := '0';
v.rc := e_in.rc;
v.is_cmp := e_in.out_cr;
if e_in.out_cr = '0' then
v.cr_mask := num_to_fxm(1);
else
v.cr_mask := num_to_fxm(to_integer(unsigned(insn_bf(e_in.insn))));
end if;
int_input := '0';
if e_in.op = OP_FPOP_I then
int_input := '1';
end if;
v.quieten_nan := '1';
v.tiny := '0';
v.denorm := '0';
v.round_mode := '0' & r.fpscr(FPSCR_RN+1 downto FPSCR_RN);
adec := decode_dp(e_in.fra, int_input);
bdec := decode_dp(e_in.frb, int_input);
v.a := adec;
v.b := bdec;
end if;
r_hi_nz <= or (r.r(55 downto 31));
r_lo_nz <= or (r.r(30 downto 2));
if r.single_prec = '0' then
max_exp := to_signed(1023, EXP_BITS);
min_exp := to_signed(-1022, EXP_BITS);
bias_exp := to_signed(1536, EXP_BITS);
else
max_exp := to_signed(127, EXP_BITS);
min_exp := to_signed(-126, EXP_BITS);
bias_exp := to_signed(192, EXP_BITS);
end if;
new_exp := r.result_exp - r.shift;
exp_tiny := '0';
exp_huge := '0';
if new_exp < min_exp then
exp_tiny := '1';
end if;
if new_exp > max_exp then
exp_huge := '1';
end if;
v.writing_back := '0';
v.instr_done := '0';
v.update_fprf := '0';
v.shift := to_signed(0, EXP_BITS);
opsel_a <= AIN_R;
opsel_ainv <= '0';
opsel_amask <= '0';
opsel_b <= BIN_ZERO;
opsel_r <= RES_SUM;
carry_in <= '0';
misc_sel <= "0000";
fpscr_mask := (others => '1');
update_fx := '0';
arith_done := '0';
invalid := '0';
renormalize := '0';
set_x := '0';
case r.state is
when IDLE =>
if e_in.valid = '1' then
case e_in.insn(5 downto 1) is
when "00000" =>
v.state := DO_MCRFS;
when "00110" =>
if e_in.insn(10) = '0' then
if e_in.insn(8) = '0' then
v.state := DO_MTFSB;
else
v.state := DO_MTFSFI;
end if;
else
v.state := DO_FMRG;
end if;
when "00111" =>
if e_in.insn(8) = '0' then
v.state := DO_MFFS;
else
v.state := DO_MTFSF;
end if;
when "01000" =>
if e_in.insn(9 downto 8) /= "11" then
v.state := DO_FMR;
else
v.state := DO_FRI;
end if;
when "01100" =>
v.state := DO_FRSP;
when "01110" =>
if int_input = '1' then
-- fcfid[u][s]
v.state := DO_FCFID;
else
v.state := DO_FCTI;
end if;
when "01111" =>
v.round_mode := "001";
v.state := DO_FCTI;
when others =>
illegal := '1';
end case;
end if;
v.x := '0';
v.old_exc := r.fpscr(FPSCR_VX downto FPSCR_XX);
when DO_MCRFS =>
j := to_integer(unsigned(insn_bfa(r.insn)));
for i in 0 to 7 loop
if i = j then
k := (7 - i) * 4;
v.cr_result := r.fpscr(k + 3 downto k);
fpscr_mask(k + 3 downto k) := "0000";
end if;
end loop;
v.fpscr := r.fpscr and (fpscr_mask or x"6007F8FF");
v.instr_done := '1';
v.state := IDLE;
when DO_MTFSB =>
-- mtfsb{0,1}
j := to_integer(unsigned(insn_bt(r.insn)));
for i in 0 to 31 loop
if i = j then
v.fpscr(31 - i) := r.insn(6);
end if;
end loop;
v.instr_done := '1';
v.state := IDLE;
when DO_MTFSFI =>
-- mtfsfi
j := to_integer(unsigned(insn_bf(r.insn)));
if r.insn(16) = '0' then
for i in 0 to 7 loop
if i = j then
k := (7 - i) * 4;
v.fpscr(k + 3 downto k) := insn_u(r.insn);
end if;
end loop;
end if;
v.instr_done := '1';
v.state := IDLE;
when DO_FMRG =>
-- fmrgew, fmrgow
opsel_r <= RES_MISC;
misc_sel <= "01" & r.insn(8) & '0';
v.int_result := '1';
v.writing_back := '1';
v.instr_done := '1';
v.state := IDLE;
when DO_MFFS =>
v.int_result := '1';
v.writing_back := '1';
opsel_r <= RES_MISC;
case r.insn(20 downto 16) is
when "00000" =>
-- mffs
when "00001" =>
-- mffsce
v.fpscr(FPSCR_VE downto FPSCR_XE) := "00000";
when "10100" | "10101" =>
-- mffscdrn[i] (but we don't implement DRN)
fpscr_mask := x"000000FF";
when "10110" =>
-- mffscrn
fpscr_mask := x"000000FF";
v.fpscr(FPSCR_RN+1 downto FPSCR_RN) :=
r.b.mantissa(FPSCR_RN+1 downto FPSCR_RN);
when "10111" =>
-- mffscrni
fpscr_mask := x"000000FF";
v.fpscr(FPSCR_RN+1 downto FPSCR_RN) := r.insn(12 downto 11);
when "11000" =>
-- mffsl
fpscr_mask := x"0007F0FF";
when others =>
illegal := '1';
end case;
v.instr_done := '1';
v.state := IDLE;
when DO_MTFSF =>
if r.insn(25) = '1' then
flm := x"FF";
elsif r.insn(16) = '1' then
flm := x"00";
else
flm := r.insn(24 downto 17);
end if;
for i in 0 to 7 loop
k := i * 4;
if flm(i) = '1' then
v.fpscr(k + 3 downto k) := r.b.mantissa(k + 3 downto k);
end if;
end loop;
v.instr_done := '1';
v.state := IDLE;
when DO_FMR =>
opsel_a <= AIN_B;
v.result_class := r.b.class;
v.result_exp := r.b.exponent;
v.quieten_nan := '0';
if r.insn(9) = '1' then
v.result_sign := '0'; -- fabs
elsif r.insn(8) = '1' then
v.result_sign := '1'; -- fnabs
elsif r.insn(7) = '1' then
v.result_sign := r.b.negative; -- fmr
elsif r.insn(6) = '1' then
v.result_sign := not r.b.negative; -- fneg
else
v.result_sign := r.a.negative; -- fcpsgn
end if;
v.writing_back := '1';
v.instr_done := '1';
v.state := IDLE;
when DO_FRI => -- fri[nzpm]
opsel_a <= AIN_B;
v.result_class := r.b.class;
v.result_sign := r.b.negative;
v.result_exp := r.b.exponent;
v.fpscr(FPSCR_FR) := '0';
v.fpscr(FPSCR_FI) := '0';
if r.b.class = NAN and r.b.mantissa(53) = '0' then
-- Signalling NAN
v.fpscr(FPSCR_VXSNAN) := '1';
invalid := '1';
end if;
if r.b.class = FINITE then
if r.b.exponent >= to_signed(52, EXP_BITS) then
-- integer already, no rounding required
arith_done := '1';
else
v.shift := r.b.exponent - to_signed(52, EXP_BITS);
v.state := FRI_1;
v.round_mode := '1' & r.insn(7 downto 6);
end if;
else
arith_done := '1';
end if;
when DO_FRSP =>
opsel_a <= AIN_B;
v.result_class := r.b.class;
v.result_sign := r.b.negative;
v.result_exp := r.b.exponent;
v.fpscr(FPSCR_FR) := '0';
v.fpscr(FPSCR_FI) := '0';
if r.b.class = NAN and r.b.mantissa(53) = '0' then
-- Signalling NAN
v.fpscr(FPSCR_VXSNAN) := '1';
invalid := '1';
end if;
set_x := '1';
if r.b.class = FINITE then
if r.b.exponent < to_signed(-126, EXP_BITS) then
v.shift := r.b.exponent - to_signed(-126, EXP_BITS);
v.state := ROUND_UFLOW;
elsif r.b.exponent > to_signed(127, EXP_BITS) then
v.state := ROUND_OFLOW;
else
v.shift := to_signed(-2, EXP_BITS);
v.state := ROUNDING;
end if;
else
arith_done := '1';
end if;
when DO_FCTI =>
-- instr bit 9: 1=dword 0=word
-- instr bit 8: 1=unsigned 0=signed
-- instr bit 1: 1=round to zero 0=use fpscr[RN]
opsel_a <= AIN_B;
v.result_class := r.b.class;
v.result_sign := r.b.negative;
v.result_exp := r.b.exponent;
v.fpscr(FPSCR_FR) := '0';
v.fpscr(FPSCR_FI) := '0';
if r.b.class = NAN and r.b.mantissa(53) = '0' then
-- Signalling NAN
v.fpscr(FPSCR_VXSNAN) := '1';
invalid := '1';
end if;
v.int_result := '1';
case r.b.class is
when ZERO =>
arith_done := '1';
when FINITE =>
if r.b.exponent >= to_signed(64, EXP_BITS) or
(r.insn(9) = '0' and r.b.exponent >= to_signed(32, EXP_BITS)) then
v.state := INT_OFLOW;
elsif r.b.exponent >= to_signed(52, EXP_BITS) then
-- integer already, no rounding required,
-- shift into final position
v.shift := r.b.exponent - to_signed(54, EXP_BITS);
if r.insn(8) = '1' and r.b.negative = '1' then
v.state := INT_OFLOW;
else
v.state := INT_ISHIFT;
end if;
else
v.shift := r.b.exponent - to_signed(52, EXP_BITS);
v.state := INT_SHIFT;
end if;
when INFINITY | NAN =>
v.state := INT_OFLOW;
end case;
when DO_FCFID =>
v.result_sign := '0';
opsel_a <= AIN_B;
if r.insn(8) = '0' and r.b.negative = '1' then
-- fcfid[s] with negative operand, set R = -B
opsel_ainv <= '1';
carry_in <= '1';
v.result_sign := '1';
end if;
v.result_class := r.b.class;
v.result_exp := to_signed(54, EXP_BITS);
v.fpscr(FPSCR_FR) := '0';
v.fpscr(FPSCR_FI) := '0';
if r.b.class = ZERO then
arith_done := '1';
else
v.state := FINISH;
end if;
when INT_SHIFT =>
opsel_r <= RES_SHIFT;
set_x := '1';
v.state := INT_ROUND;
v.shift := to_signed(-2, EXP_BITS);
when INT_ROUND =>
opsel_r <= RES_SHIFT;
round := fp_rounding(r.r, r.x, '0', r.round_mode, r.result_sign);
v.fpscr(FPSCR_FR downto FPSCR_FI) := round;
-- Check for negative values that don't round to 0 for fcti*u*
if r.insn(8) = '1' and r.result_sign = '1' and
(r_hi_nz or r_lo_nz or v.fpscr(FPSCR_FR)) = '1' then
v.state := INT_OFLOW;
else
v.state := INT_FINAL;
end if;
when INT_ISHIFT =>
opsel_r <= RES_SHIFT;
v.state := INT_FINAL;
when INT_FINAL =>
-- Negate if necessary, and increment for rounding if needed
opsel_ainv <= r.result_sign;
carry_in <= r.fpscr(FPSCR_FR) xor r.result_sign;
-- Check for possible overflows
case r.insn(9 downto 8) is
when "00" => -- fctiw[z]
need_check := r.r(31) or (r.r(30) and not r.result_sign);
when "01" => -- fctiwu[z]
need_check := r.r(31);
when "10" => -- fctid[z]
need_check := r.r(63) or (r.r(62) and not r.result_sign);
when others => -- fctidu[z]
need_check := r.r(63);
end case;
if need_check = '1' then
v.state := INT_CHECK;
else
if r.fpscr(FPSCR_FI) = '1' then
v.fpscr(FPSCR_XX) := '1';
end if;
arith_done := '1';
end if;
when INT_CHECK =>
if r.insn(9) = '0' then
msb := r.r(31);
else
msb := r.r(63);
end if;
misc_sel <= '1' & r.insn(9 downto 8) & r.result_sign;
if (r.insn(8) = '0' and msb /= r.result_sign) or
(r.insn(8) = '1' and msb /= '1') then
opsel_r <= RES_MISC;
v.fpscr(FPSCR_VXCVI) := '1';
invalid := '1';
else
if r.fpscr(FPSCR_FI) = '1' then
v.fpscr(FPSCR_XX) := '1';
end if;
end if;
arith_done := '1';
when INT_OFLOW =>
opsel_r <= RES_MISC;
misc_sel <= '1' & r.insn(9 downto 8) & r.result_sign;
if r.b.class = NAN then
misc_sel(0) <= '1';
end if;
v.fpscr(FPSCR_VXCVI) := '1';
invalid := '1';
arith_done := '1';
when FRI_1 =>
opsel_r <= RES_SHIFT;
set_x := '1';
v.shift := to_signed(-2, EXP_BITS);
v.state := ROUNDING;
when FINISH =>
if r.r(63 downto 54) /= "0000000001" then
renormalize := '1';
v.state := NORMALIZE;
else
set_x := '1';
if exp_tiny = '1' then
v.shift := new_exp - min_exp;
v.state := ROUND_UFLOW;
elsif exp_huge = '1' then
v.state := ROUND_OFLOW;
else
v.shift := to_signed(-2, EXP_BITS);
v.state := ROUNDING;
end if;
end if;
when NORMALIZE =>
-- Shift so we have 9 leading zeroes (we know R is non-zero)
opsel_r <= RES_SHIFT;
set_x := '1';
if exp_tiny = '1' then
v.shift := new_exp - min_exp;
v.state := ROUND_UFLOW;
elsif exp_huge = '1' then
v.state := ROUND_OFLOW;
else
v.shift := to_signed(-2, EXP_BITS);
v.state := ROUNDING;
end if;
when ROUND_UFLOW =>
v.tiny := '1';
if r.fpscr(FPSCR_UE) = '0' then
-- disabled underflow exception case
-- have to denormalize before rounding
opsel_r <= RES_SHIFT;
set_x := '1';
v.shift := to_signed(-2, EXP_BITS);
v.state := ROUNDING;
else
-- enabled underflow exception case
-- if denormalized, have to normalize before rounding
v.fpscr(FPSCR_UX) := '1';
v.result_exp := r.result_exp + bias_exp;
if r.r(54) = '0' then
renormalize := '1';
v.state := NORMALIZE;
else
v.shift := to_signed(-2, EXP_BITS);
v.state := ROUNDING;
end if;
end if;
when ROUND_OFLOW =>
v.fpscr(FPSCR_OX) := '1';
if r.fpscr(FPSCR_OE) = '0' then
-- disabled overflow exception
-- result depends on rounding mode
v.fpscr(FPSCR_XX) := '1';
v.fpscr(FPSCR_FI) := '1';
if r.round_mode(1 downto 0) = "00" or
(r.round_mode(1) = '1' and r.round_mode(0) = r.result_sign) then
v.result_class := INFINITY;
v.fpscr(FPSCR_FR) := '1';
else
v.fpscr(FPSCR_FR) := '0';
end if;
-- construct largest representable number
v.result_exp := max_exp;
opsel_r <= RES_MISC;
misc_sel <= "001" & r.single_prec;
arith_done := '1';
else
-- enabled overflow exception
v.result_exp := r.result_exp - bias_exp;
v.shift := to_signed(-2, EXP_BITS);
v.state := ROUNDING;
end if;
when ROUNDING =>
opsel_amask <= '1';
round := fp_rounding(r.r, r.x, r.single_prec, r.round_mode, r.result_sign);
v.fpscr(FPSCR_FR downto FPSCR_FI) := round;
if round(1) = '1' then
-- set mask to increment the LSB for the precision
opsel_b <= BIN_MASK;
carry_in <= '1';
v.shift := to_signed(-1, EXP_BITS);
v.state := ROUNDING_2;
else
if r.r(54) = '0' then
-- result after masking could be zero, or could be a
-- denormalized result that needs to be renormalized
renormalize := '1';
v.state := ROUNDING_3;
else
arith_done := '1';
end if;
end if;
if round(0) = '1' then
v.fpscr(FPSCR_XX) := '1';
if r.tiny = '1' then
v.fpscr(FPSCR_UX) := '1';
end if;
end if;
when ROUNDING_2 =>
-- Check for overflow during rounding
v.x := '0';
if r.r(55) = '1' then
opsel_r <= RES_SHIFT;
if exp_huge = '1' then
v.state := ROUND_OFLOW;
else
arith_done := '1';
end if;
elsif r.r(54) = '0' then
-- Do CLZ so we can renormalize the result
renormalize := '1';
v.state := ROUNDING_3;
else
arith_done := '1';
end if;
when ROUNDING_3 =>
mant_nz := r_hi_nz or (r_lo_nz and not r.single_prec);
if mant_nz = '0' then
v.result_class := ZERO;
arith_done := '1';
else
-- Renormalize result after rounding
opsel_r <= RES_SHIFT;
v.denorm := exp_tiny;
v.shift := new_exp - to_signed(-1022, EXP_BITS);
if new_exp < to_signed(-1022, EXP_BITS) then
v.state := DENORM;
else
arith_done := '1';
end if;
end if;
when DENORM =>
opsel_r <= RES_SHIFT;
arith_done := '1';
end case;
if arith_done = '1' then
-- Enabled invalid exception doesn't write result or FPRF
if (invalid and r.fpscr(FPSCR_VE)) = '0' then
v.writing_back := '1';
v.update_fprf := '1';
end if;
v.instr_done := '1';
v.state := IDLE;
update_fx := '1';
end if;
-- Data path.
-- This has A and B input multiplexers, an adder, a shifter,
-- count-leading-zeroes logic, and a result mux.
if r.single_prec = '1' then
mshift := r.shift + to_signed(-29, EXP_BITS);
else
mshift := r.shift;
end if;
if mshift < to_signed(-64, EXP_BITS) then
mask := (others => '1');
elsif mshift >= to_signed(0, EXP_BITS) then
mask := (others => '0');
else
mask := right_mask(unsigned(mshift(5 downto 0)));
end if;
case opsel_a is
when AIN_R =>
in_a0 := r.r;
when AIN_A =>
in_a0 := r.a.mantissa;
when others =>
in_a0 := r.b.mantissa;
end case;
if (or (mask and in_a0)) = '1' and set_x = '1' then
v.x := '1';
end if;
if opsel_ainv = '1' then
in_a0 := not in_a0;
end if;
if opsel_amask = '1' then
in_a0 := in_a0 and not mask;
end if;
in_a <= in_a0;
case opsel_b is
when BIN_ZERO =>
in_b0 := (others => '0');
when BIN_R =>
in_b0 := r.r;
when BIN_MASK =>
in_b0 := mask;
when others =>
in_b0 := (others => '0');
end case;
in_b <= in_b0;
if r.shift >= to_signed(-64, EXP_BITS) and r.shift <= to_signed(63, EXP_BITS) then
shift_res := shifter_64(r.r & x"00000000000000",
std_ulogic_vector(r.shift(6 downto 0)));
else
shift_res := (others => '0');
end if;
case opsel_r is
when RES_SUM =>
result <= std_ulogic_vector(unsigned(in_a) + unsigned(in_b) + carry_in);
when RES_SHIFT =>
result <= shift_res;
when others =>
case misc_sel is
when "0000" =>
misc := x"00000000" & (r.fpscr and fpscr_mask);
when "0010" =>
-- mantissa of max representable DP number
misc := x"007ffffffffffffc";
when "0011" =>
-- mantissa of max representable SP number
misc := x"007fffff80000000";
when "0100" =>
-- fmrgow result
misc := r.a.mantissa(31 downto 0) & r.b.mantissa(31 downto 0);
when "0110" =>
-- fmrgew result
misc := r.a.mantissa(63 downto 32) & r.b.mantissa(63 downto 32);
when "1000" =>
-- max positive result for fctiw[z]
misc := x"000000007fffffff";
when "1001" =>
-- max negative result for fctiw[z]
misc := x"ffffffff80000000";
when "1010" =>
-- max positive result for fctiwu[z]
misc := x"00000000ffffffff";
when "1011" =>
-- max negative result for fctiwu[z]
misc := x"0000000000000000";
when "1100" =>
-- max positive result for fctid[z]
misc := x"7fffffffffffffff";
when "1101" =>
-- max negative result for fctid[z]
misc := x"8000000000000000";
when "1110" =>
-- max positive result for fctidu[z]
misc := x"ffffffffffffffff";
when "1111" =>
-- max negative result for fctidu[z]
misc := x"0000000000000000";
when others =>
misc := x"0000000000000000";
end case;
result <= misc;
end case;
v.r := result;
if opsel_r = RES_SHIFT then
v.result_exp := new_exp;
end if;
if renormalize = '1' then
clz := count_left_zeroes(r.r);
v.shift := resize(signed('0' & clz) - 9, EXP_BITS);
end if;
if r.int_result = '1' then
fp_result <= r.r;
else
fp_result <= pack_dp(r.result_sign, r.result_class, r.result_exp, r.r,
r.single_prec, r.quieten_nan);
end if;
if r.update_fprf = '1' then
v.fpscr(FPSCR_C downto FPSCR_FU) := result_flags(r.result_sign, r.result_class,
r.r(54) and not r.denorm);
end if;
v.fpscr(FPSCR_VX) := (or (v.fpscr(FPSCR_VXSNAN downto FPSCR_VXVC))) or
(or (v.fpscr(FPSCR_VXSOFT downto FPSCR_VXCVI)));
v.fpscr(FPSCR_FEX) := or (v.fpscr(FPSCR_VX downto FPSCR_XX) and
v.fpscr(FPSCR_VE downto FPSCR_XE));
if update_fx = '1' and
(v.fpscr(FPSCR_VX downto FPSCR_XX) and not r.old_exc) /= "00000" then
v.fpscr(FPSCR_FX) := '1';
end if;
if r.rc = '1' then
v.cr_result := v.fpscr(FPSCR_FX downto FPSCR_OX);
end if;
if illegal = '1' then
v.instr_done := '0';
v.do_intr := '0';
v.writing_back := '0';
v.busy := '0';
v.state := IDLE;
else
v.do_intr := v.instr_done and v.fpscr(FPSCR_FEX) and r.fe_mode;
if v.state /= IDLE or v.do_intr = '1' then
v.busy := '1';
end if;
end if;
rin <= v;
e_out.illegal <= illegal;
end process;
end architecture behaviour;