You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
microwatt/README.md

138 lines
3.6 KiB
Markdown

<p align="center">
<img src="media/microwatt-title.png" alt="Microwatt">
</p>
# Microwatt
A tiny Open POWER ISA softcore written in VHDL 2008. It aims to be simple and easy
to understand.
## Simulation using ghdl
<p align="center">
<img src="http://neuling.org/microwatt-micropython.gif" alt="MicroPython running on Microwatt"/>
</p>
You can try out Microwatt/Micropython without hardware by using the ghdl simulator. If you want to build directly for a hardware target board, see below.
- Build micropython. If you aren't building on a ppc64le box you
will need a cross compiler. If it isn't available on your distro
grab the powerpc64le-power8 toolchain from https://toolchains.bootlin.com.
You may need to set the CROSS_COMPILE environment variable
to the prefix used for your cross compilers. The default is
powerpc64le-linux-gnu-.
```
git clone https://github.com/micropython/micropython.git
cd micropython
cd ports/powerpc
make -j$(nproc)
cd ../../../
```
A prebuilt micropython image is also available in the micropython/ directory.
- Microwatt uses ghdl for simulation. Either install this from your
distro or build it. Microwatt requires ghdl to be built with the LLVM
or gcc backend, which not all distros do (Fedora does, Debian/Ubuntu
appears not to). ghdl with the LLVM backend is likely easier to build.
If building ghdl from scratch is too much for you, the microwatt Makefile
supports using Docker or Podman.
- Next build microwatt:
```
git clone https://github.com/antonblanchard/microwatt
cd microwatt
make
```
To build using Docker:
```
make DOCKER=1
```
and to build using Podman:
```
make PODMAN=1
```
- Link in the micropython image:
```
ln -s ../micropython/ports/powerpc/build/firmware.bin main_ram.bin
```
Or if you were using the pre-built image:
```
ln -s micropython/firmware.bin main_ram.bin
```
- Now run microwatt, sending debug output to /dev/null:
```
./core_tb > /dev/null
```
## Synthesis on Xilinx FPGAs using Vivado
- Install Vivado (I'm using the free 2019.1 webpack edition).
- Setup Vivado paths:
```
source /opt/Xilinx/Vivado/2019.1/settings64.sh
```
- Install FuseSoC:
```
pip3 install --user -U fusesoc
```
Fedora users can get FuseSoC package via
```
sudo dnf copr enable sharkcz/danny
sudo dnf install fusesoc
```
- If this is your first time using fusesoc, initialize fusesoc.
This is needed to be able to pull down fussoc library components referenced
by microwatt. Run
```
fusesoc init
fusesoc fetch uart16550
fusesoc library add microwatt /path/to/microwatt
```
- Build using FuseSoC. For hello world (Replace nexys_video with your FPGA board such as --target=arty_a7-100):
You may wish to ensure you have [installed Digilent Board files](https://reference.digilentinc.com/vivado/installing-vivado/start#installing_digilent_board_files)
or appropriate files for your board first.
```
fusesoc run --target=nexys_video microwatt --memory_size=16384 --ram_init_file=/path/to/microwatt/fpga/hello_world.hex
```
You should then be able to see output via the serial port of the board (/dev/ttyUSB1, 115200 for example assuming standard clock speeds). There is a know bug where initial output may not be sent - try the reset (not programming button) on your board if you don't see anything.
- To build micropython (currently requires 1MB of BRAM eg an Artix-7 A200):
```
fusesoc run --target=nexys_video microwatt
```
## Testing
- A simple test suite containing random execution test cases and a couple of
micropython test cases can be run with:
```
make -j$(nproc) check
```
## Issues
- There are a few instructions still to be implemented:
- Vector/VMX/VSX