Merge remote-tracking branch 'remotes/origin/master'
commit
102b304db7
Binary file not shown.
@ -0,0 +1,3 @@
|
||||
Test 0:PASS
|
||||
Test 1:PASS
|
||||
Test 2:PASS
|
||||
@ -0,0 +1,5 @@
|
||||
TEST=xics
|
||||
|
||||
include ../Makefile.test
|
||||
|
||||
xics.o : xics.h
|
||||
@ -0,0 +1,186 @@
|
||||
/* Copyright 2013-2014 IBM Corp.
|
||||
*
|
||||
* Licensed under the Apache License, Version 2.0 (the "License");
|
||||
* you may not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at
|
||||
*
|
||||
* http://www.apache.org/licenses/LICENSE-2.0
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
|
||||
* implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*/
|
||||
|
||||
#define STACK_TOP 0x4000
|
||||
|
||||
/* Load an immediate 64-bit value into a register */
|
||||
#define LOAD_IMM64(r, e) \
|
||||
lis r,(e)@highest; \
|
||||
ori r,r,(e)@higher; \
|
||||
rldicr r,r, 32, 31; \
|
||||
oris r,r, (e)@h; \
|
||||
ori r,r, (e)@l;
|
||||
|
||||
.section ".head","ax"
|
||||
|
||||
/* Microwatt currently enters in LE mode at 0x0 */
|
||||
. = 0
|
||||
.global _start
|
||||
_start:
|
||||
LOAD_IMM64(%r12, 0x000000000ffffff)
|
||||
mtdec %r12
|
||||
LOAD_IMM64(%r12, 0x9000000000008003)
|
||||
mtmsrd %r12 // EE on
|
||||
/* setup stack */
|
||||
LOAD_IMM64(%r1, STACK_TOP - 0x100)
|
||||
LOAD_IMM64(%r12, main)
|
||||
mtctr %r12
|
||||
bctrl
|
||||
attn // terminate on exit
|
||||
b .
|
||||
|
||||
#define EXCEPTION(nr) \
|
||||
.= nr ;\
|
||||
b .
|
||||
|
||||
/* More exception stubs */
|
||||
EXCEPTION(0x300)
|
||||
EXCEPTION(0x380)
|
||||
EXCEPTION(0x400)
|
||||
EXCEPTION(0x480)
|
||||
. = 0x500
|
||||
b __isr
|
||||
|
||||
EXCEPTION(0x600)
|
||||
EXCEPTION(0x700)
|
||||
EXCEPTION(0x800)
|
||||
EXCEPTION(0x900)
|
||||
EXCEPTION(0x980)
|
||||
EXCEPTION(0xa00)
|
||||
EXCEPTION(0xb00)
|
||||
EXCEPTION(0xc00)
|
||||
EXCEPTION(0xd00)
|
||||
|
||||
// ISR data
|
||||
|
||||
#define REDZONE_SIZE (512)
|
||||
#define REG_SAVE_SIZE ((32 + 5)*8)
|
||||
#define STACK_FRAME_C_MINIMAL 64
|
||||
|
||||
#define SAVE_NIA (32*8)
|
||||
#define SAVE_LR (33*8)
|
||||
#define SAVE_CTR (34*8)
|
||||
#define SAVE_CR (35*8)
|
||||
#define SAVE_SRR1 (36*8)
|
||||
|
||||
__isr:
|
||||
/*
|
||||
* Assume where we are coming from has a stack and can save there.
|
||||
* We save the full register set. Since we are calling out to C, we
|
||||
* could just save the ABI volatile registers
|
||||
*/
|
||||
stdu %r1,-(REG_SAVE_SIZE+REDZONE_SIZE)(%r1)
|
||||
std %r0, 1*8(%r1)
|
||||
// std %r1, 1*8(%r1)
|
||||
std %r2, 2*8(%r1)
|
||||
std %r3, 3*8(%r1)
|
||||
std %r4, 4*8(%r1)
|
||||
std %r5, 5*8(%r1)
|
||||
std %r6, 6*8(%r1)
|
||||
std %r7, 7*8(%r1)
|
||||
std %r8, 8*8(%r1)
|
||||
std %r9, 9*8(%r1)
|
||||
std %r10, 10*8(%r1)
|
||||
std %r11, 11*8(%r1)
|
||||
std %r12, 12*8(%r1)
|
||||
std %r13, 13*8(%r1)
|
||||
std %r14, 14*8(%r1)
|
||||
std %r15, 15*8(%r1)
|
||||
std %r16, 16*8(%r1)
|
||||
std %r17, 17*8(%r1)
|
||||
std %r18, 18*8(%r1)
|
||||
std %r19, 19*8(%r1)
|
||||
std %r20, 20*8(%r1)
|
||||
std %r21, 21*8(%r1)
|
||||
std %r22, 22*8(%r1)
|
||||
std %r23, 23*8(%r1)
|
||||
std %r24, 24*8(%r1)
|
||||
std %r25, 25*8(%r1)
|
||||
std %r26, 26*8(%r1)
|
||||
std %r27, 27*8(%r1)
|
||||
std %r28, 28*8(%r1)
|
||||
std %r29, 29*8(%r1)
|
||||
std %r30, 30*8(%r1)
|
||||
std %r31, 31*8(%r1)
|
||||
mfsrr0 %r0
|
||||
std %r0, SAVE_NIA*8(%r1)
|
||||
mflr %r0
|
||||
std %r0, SAVE_LR*8(%r1)
|
||||
mfctr %r0
|
||||
std %r0, SAVE_CTR*8(%r1)
|
||||
mfcr %r0
|
||||
std %r0, SAVE_CR*8(%r1)
|
||||
mfsrr1 %r0
|
||||
std %r0, SAVE_SRR1*8(%r1)
|
||||
|
||||
stdu %r1,-STACK_FRAME_C_MINIMAL(%r1)
|
||||
LOAD_IMM64(%r3, isr)
|
||||
mtctr %r3,
|
||||
bctrl
|
||||
nop
|
||||
ld %r1, 0(%r1)
|
||||
|
||||
ld %r0, 1*8(%r1)
|
||||
// ld %r1, 1*8(%r1) // do this at rfid
|
||||
ld %r2, 2*8(%r1)
|
||||
// ld %r3, 3*8(%r1) // do this at rfid
|
||||
ld %r4, 4*8(%r1)
|
||||
ld %r5, 5*8(%r1)
|
||||
ld %r6, 6*8(%r1)
|
||||
ld %r7, 7*8(%r1)
|
||||
ld %r8, 8*8(%r1)
|
||||
ld %r9, 9*8(%r1)
|
||||
ld %r10, 10*8(%r1)
|
||||
ld %r11, 11*8(%r1)
|
||||
ld %r12, 12*8(%r1)
|
||||
ld %r13, 13*8(%r1)
|
||||
ld %r14, 14*8(%r1)
|
||||
ld %r15, 15*8(%r1)
|
||||
ld %r16, 16*8(%r1)
|
||||
ld %r17, 17*8(%r1)
|
||||
ld %r18, 18*8(%r1)
|
||||
ld %r19, 19*8(%r1)
|
||||
ld %r20, 20*8(%r1)
|
||||
ld %r21, 21*8(%r1)
|
||||
ld %r22, 22*8(%r1)
|
||||
ld %r23, 23*8(%r1)
|
||||
ld %r24, 24*8(%r1)
|
||||
ld %r25, 25*8(%r1)
|
||||
ld %r26, 26*8(%r1)
|
||||
ld %r27, 27*8(%r1)
|
||||
ld %r28, 28*8(%r1)
|
||||
ld %r29, 29*8(%r1)
|
||||
ld %r30, 30*8(%r1)
|
||||
ld %r31, 31*8(%r1)
|
||||
|
||||
ld %r3, SAVE_LR*8(%r1)
|
||||
mtlr %r3
|
||||
ld %r3, SAVE_CTR*8(%r1)
|
||||
mtctr %r3
|
||||
ld %r3, SAVE_CR*8(%r1)
|
||||
mtcr %r3
|
||||
ld %r3, SAVE_SRR1*8(%r1)
|
||||
mtsrr1 %r3
|
||||
ld %r3, SAVE_NIA*8(%r1)
|
||||
mtsrr0 %r3
|
||||
|
||||
/* restore %r3 */
|
||||
ld %r3, 3*8(%r1)
|
||||
|
||||
/* do final fixup r1 */
|
||||
ld %r1, 0*8(%r1)
|
||||
|
||||
rfid
|
||||
@ -0,0 +1,13 @@
|
||||
SECTIONS
|
||||
{
|
||||
_start = .;
|
||||
. = 0;
|
||||
.head : {
|
||||
KEEP(*(.head))
|
||||
}
|
||||
. = 0x1000;
|
||||
.text : { *(.text) }
|
||||
. = 0x3000;
|
||||
.data : { *(.data) }
|
||||
.bss : { *(.bss) }
|
||||
}
|
||||
@ -0,0 +1,262 @@
|
||||
#include <stddef.h>
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#include <limits.h>
|
||||
|
||||
#include "console.h"
|
||||
#include "xics.h"
|
||||
|
||||
#undef DEBUG
|
||||
//#define DEBUG 1
|
||||
|
||||
void print_number(unsigned int i) // only for i = 0-999
|
||||
{
|
||||
unsigned int j, k, m;
|
||||
bool zeros = false;
|
||||
|
||||
k = 1000000000;
|
||||
|
||||
for (m = 0; m < 10 ; m++) {
|
||||
j = i/k;
|
||||
if (m == 9) zeros = true;
|
||||
if (zeros || (j != 0)) {
|
||||
putchar(48 + j);
|
||||
zeros = true;
|
||||
}
|
||||
i = i % k;
|
||||
k = k / 10;
|
||||
}
|
||||
}
|
||||
|
||||
#ifdef DEBUG
|
||||
#define DEBUG_STR "\r\nDEBUG: "
|
||||
void debug_print(int i)
|
||||
{
|
||||
putstr(DEBUG_STR, strlen(DEBUG_STR));
|
||||
print_number(i);
|
||||
putstr("\r\n", 2);
|
||||
}
|
||||
|
||||
#define debug_putstr(a, b) putstr(a,b)
|
||||
#else
|
||||
#define debug_putstr(a, b)
|
||||
#define debug_print(i)
|
||||
#endif
|
||||
|
||||
#define ASSERT_FAIL "() ASSERT_FAILURE!\r\n "
|
||||
#define assert(cond) \
|
||||
if (!(cond)) { \
|
||||
putstr(__FILE__, strlen(__FILE__)); \
|
||||
putstr(":", 1); \
|
||||
print_number(__LINE__); \
|
||||
putstr(":", 1); \
|
||||
putstr(__FUNCTION__, strlen(__FUNCTION__));\
|
||||
putstr(ASSERT_FAIL, strlen(ASSERT_FAIL)); \
|
||||
__asm__ ("attn"); \
|
||||
}
|
||||
|
||||
|
||||
volatile uint64_t isrs_run;
|
||||
|
||||
#define ISR_IPI 0x0000000000000001
|
||||
#define ISR_UART 0x0000000000000002
|
||||
#define ISR_SPURIOUS 0x0000000000000004
|
||||
|
||||
#define IPI "IPI\r\n"
|
||||
void ipi_isr(void) {
|
||||
debug_putstr(IPI, strlen(IPI));
|
||||
|
||||
isrs_run |= ISR_IPI;
|
||||
}
|
||||
|
||||
|
||||
#define UART "UART\r\n"
|
||||
void uart_isr(void) {
|
||||
debug_putstr(UART, strlen(UART));
|
||||
|
||||
potato_uart_irq_dis(); // disable interrupt to ack it
|
||||
|
||||
isrs_run |= ISR_UART;
|
||||
}
|
||||
|
||||
// The hardware doesn't support this but it's part of XICS so add it.
|
||||
#define SPURIOUS "SPURIOUS\r\n"
|
||||
void spurious_isr(void) {
|
||||
debug_putstr(SPURIOUS, strlen(SPURIOUS));
|
||||
|
||||
isrs_run |= ISR_SPURIOUS;
|
||||
}
|
||||
|
||||
struct isr_op {
|
||||
void (*func)(void);
|
||||
int source_id;
|
||||
};
|
||||
|
||||
struct isr_op isr_table[] = {
|
||||
{ .func = ipi_isr, .source_id = 2 },
|
||||
{ .func = uart_isr, .source_id = 16 },
|
||||
{ .func = spurious_isr, .source_id = 0 },
|
||||
{ .func = NULL, .source_id = 0 }
|
||||
};
|
||||
|
||||
bool ipi_running;
|
||||
|
||||
#define ISR "ISR XISR="
|
||||
void isr(void)
|
||||
{
|
||||
struct isr_op *op;
|
||||
uint32_t xirr;
|
||||
|
||||
assert(!ipi_running); // check we aren't reentrant
|
||||
ipi_running = true;
|
||||
|
||||
xirr = xics_read32(XICS_XIRR); // read hardware irq source
|
||||
|
||||
#ifdef DEBUG
|
||||
putstr(ISR, strlen(ISR));
|
||||
print_number(xirr & 0xff);
|
||||
putstr("\r\n", 2);
|
||||
#endif
|
||||
|
||||
op = isr_table;
|
||||
while (1) {
|
||||
assert(op->func); // didn't find isr
|
||||
if (op->source_id == (xirr & 0x00ffffff)) {
|
||||
op->func();
|
||||
break;
|
||||
}
|
||||
op++;
|
||||
}
|
||||
|
||||
xics_write32(XICS_XIRR, xirr); // EOI
|
||||
|
||||
ipi_running = false;
|
||||
}
|
||||
|
||||
/*****************************************/
|
||||
|
||||
int xics_test_0(void)
|
||||
{
|
||||
// setup
|
||||
xics_write8(XICS_XIRR, 0x00); // mask all interrupts
|
||||
isrs_run = 0;
|
||||
|
||||
xics_write8(XICS_XIRR, 0x00); // mask all interrupts
|
||||
|
||||
// trigger two interrupts
|
||||
potato_uart_irq_en(); // cause 0x500 interrupt
|
||||
xics_write8(XICS_MFRR, 0x05); // cause 0x500 interrupt
|
||||
|
||||
// still masked, so shouldn't happen yet
|
||||
assert(isrs_run == 0);
|
||||
|
||||
// unmask IPI only
|
||||
xics_write8(XICS_XIRR, 0x40);
|
||||
assert(isrs_run == ISR_IPI);
|
||||
|
||||
// unmask UART
|
||||
xics_write8(XICS_XIRR, 0xc0);
|
||||
assert(isrs_run == (ISR_IPI | ISR_UART));
|
||||
|
||||
// cleanup
|
||||
xics_write8(XICS_XIRR, 0x00); // mask all interrupts
|
||||
isrs_run = 0;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int xics_test_1(void)
|
||||
{
|
||||
// setup
|
||||
xics_write8(XICS_XIRR, 0x00); // mask all interrupts
|
||||
isrs_run = 0;
|
||||
|
||||
xics_write8(XICS_XIRR, 0xff); // allow all interrupts
|
||||
|
||||
// should be none pending
|
||||
assert(isrs_run == 0);
|
||||
|
||||
// trigger both
|
||||
potato_uart_irq_en(); // cause 0x500 interrupt
|
||||
xics_write8(XICS_MFRR, 0x05); // cause 0x500 interrupt
|
||||
|
||||
assert(isrs_run == (ISR_IPI | ISR_UART));
|
||||
|
||||
// cleanup
|
||||
xics_write8(XICS_XIRR, 0x00); // mask all interrupts
|
||||
isrs_run = 0;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
void mtmsrd(uint64_t val)
|
||||
{
|
||||
__asm__ volatile("mtmsrd %0" : : "r" (val));
|
||||
}
|
||||
|
||||
int xics_test_2(void)
|
||||
{
|
||||
// setup
|
||||
xics_write8(XICS_XIRR, 0x00); // mask all interrupts
|
||||
isrs_run = 0;
|
||||
|
||||
// trigger interrupts with MSR[EE]=0 and show they are not run
|
||||
mtmsrd(0x9000000000000003); // EE off
|
||||
|
||||
xics_write8(XICS_XIRR, 0xff); // allow all interrupts
|
||||
|
||||
// trigger an IPI
|
||||
xics_write8(XICS_MFRR, 0x05); // cause 0x500 interrupt
|
||||
|
||||
assert(isrs_run == 0);
|
||||
|
||||
mtmsrd(0x9000000000008003); // EE on
|
||||
assert(isrs_run == ISR_IPI);
|
||||
|
||||
// cleanup
|
||||
xics_write8(XICS_XIRR, 0x00); // mask all interrupts
|
||||
isrs_run = 0;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
#define TEST "Test "
|
||||
#define PASS "PASS\r\n"
|
||||
#define FAIL "FAIL\r\n"
|
||||
|
||||
int (*tests[])(void) = {
|
||||
xics_test_0,
|
||||
xics_test_1,
|
||||
xics_test_2,
|
||||
NULL
|
||||
};
|
||||
|
||||
int main(void)
|
||||
{
|
||||
int fail = 0;
|
||||
int i = 0;
|
||||
int (*t)(void);
|
||||
|
||||
potato_uart_init();
|
||||
ipi_running = false;
|
||||
|
||||
/* run the tests */
|
||||
while (1) {
|
||||
t = tests[i];
|
||||
if (!t)
|
||||
break;
|
||||
|
||||
putstr(TEST, strlen(TEST));
|
||||
print_number(i);
|
||||
putstr(": ", 1);
|
||||
if (t() != 0) {
|
||||
fail = 1;
|
||||
putstr(FAIL, strlen(FAIL));
|
||||
} else
|
||||
putstr(PASS, strlen(PASS));
|
||||
|
||||
i++;
|
||||
}
|
||||
|
||||
return fail;
|
||||
}
|
||||
@ -0,0 +1,36 @@
|
||||
#include <stdint.h>
|
||||
|
||||
#define XICS_BASE 0xc0004000
|
||||
|
||||
static uint64_t xics_base = XICS_BASE;
|
||||
|
||||
#define XICS_XIRR_POLL 0x0
|
||||
#define XICS_XIRR 0x4
|
||||
#define XICS_RESV 0x8
|
||||
#define XICS_MFRR 0xC
|
||||
|
||||
uint8_t xics_read8(int offset)
|
||||
{
|
||||
uint32_t val;
|
||||
|
||||
__asm__ volatile("lbzcix %0,%1,%2" : "=r" (val) : "b" (xics_base), "r" (offset));
|
||||
return val;
|
||||
}
|
||||
|
||||
void xics_write8(int offset, uint8_t val)
|
||||
{
|
||||
__asm__ volatile("stbcix %0,%1,%2" : : "r" (val), "b" (xics_base), "r" (offset));
|
||||
}
|
||||
|
||||
uint32_t xics_read32(int offset)
|
||||
{
|
||||
uint32_t val;
|
||||
|
||||
__asm__ volatile("lwzcix %0,%1,%2" : "=r" (val) : "b" (xics_base), "r" (offset));
|
||||
return val;
|
||||
}
|
||||
|
||||
void xics_write32(int offset, uint32_t val)
|
||||
{
|
||||
__asm__ volatile("stwcix %0,%1,%2" : : "r" (val), "b" (xics_base), "r" (offset));
|
||||
}
|
||||
@ -0,0 +1,207 @@
|
||||
--
|
||||
-- This is a simple XICS compliant interrupt controller. This is a
|
||||
-- Presenter (ICP) and Source (ICS) in a single unit with no routing
|
||||
-- layer.
|
||||
--
|
||||
-- The sources have a fixed IRQ priority set by HW_PRIORITY. The
|
||||
-- source id starts at 16 for int_level_in(0) and go up from
|
||||
-- there (ie int_level_in(1) is source id 17).
|
||||
--
|
||||
-- The presentation layer will pick an interupt that is more
|
||||
-- favourable than the current CPPR and present it via the XISR and
|
||||
-- send an interrpt to the processor (via e_out). This may not be the
|
||||
-- highest priority interrupt currently presented (which is allowed
|
||||
-- via XICS)
|
||||
--
|
||||
|
||||
library ieee;
|
||||
use ieee.std_logic_1164.all;
|
||||
use ieee.numeric_std.all;
|
||||
|
||||
library work;
|
||||
use work.common.all;
|
||||
use work.wishbone_types.all;
|
||||
|
||||
entity xics is
|
||||
generic (
|
||||
LEVEL_NUM : positive := 16
|
||||
);
|
||||
port (
|
||||
clk : in std_logic;
|
||||
rst : in std_logic;
|
||||
|
||||
wb_in : in wishbone_master_out;
|
||||
wb_out : out wishbone_slave_out;
|
||||
|
||||
int_level_in : in std_ulogic_vector(LEVEL_NUM - 1 downto 0);
|
||||
|
||||
e_out : out XicsToExecute1Type
|
||||
);
|
||||
end xics;
|
||||
|
||||
architecture behaviour of xics is
|
||||
type reg_internal_t is record
|
||||
xisr : std_ulogic_vector(23 downto 0);
|
||||
cppr : std_ulogic_vector(7 downto 0);
|
||||
pending_priority : std_ulogic_vector(7 downto 0);
|
||||
mfrr : std_ulogic_vector(7 downto 0);
|
||||
mfrr_pending : std_ulogic;
|
||||
irq : std_ulogic;
|
||||
wb_rd_data : wishbone_data_type;
|
||||
wb_ack : std_ulogic;
|
||||
end record;
|
||||
constant reg_internal_init : reg_internal_t :=
|
||||
(wb_ack => '0',
|
||||
mfrr_pending => '0',
|
||||
mfrr => x"00", -- mask everything on reset
|
||||
irq => '0',
|
||||
others => (others => '0'));
|
||||
|
||||
signal r, r_next : reg_internal_t;
|
||||
|
||||
-- hardwire the hardware IRQ priority
|
||||
constant HW_PRIORITY : std_ulogic_vector(7 downto 0) := x"80";
|
||||
|
||||
-- 32 bit offsets for each presentation
|
||||
constant XIRR_POLL : std_ulogic_vector(31 downto 0) := x"00000000";
|
||||
constant XIRR : std_ulogic_vector(31 downto 0) := x"00000004";
|
||||
constant RESV0 : std_ulogic_vector(31 downto 0) := x"00000008";
|
||||
constant MFRR : std_ulogic_vector(31 downto 0) := x"0000000c";
|
||||
|
||||
begin
|
||||
|
||||
regs : process(clk)
|
||||
begin
|
||||
if rising_edge(clk) then
|
||||
r <= r_next;
|
||||
end if;
|
||||
end process;
|
||||
|
||||
wb_out.dat <= r.wb_rd_data;
|
||||
wb_out.ack <= r.wb_ack;
|
||||
wb_out.stall <= '0'; -- never stall wishbone
|
||||
e_out.irq <= r.irq;
|
||||
|
||||
comb : process(all)
|
||||
variable v : reg_internal_t;
|
||||
variable xirr_accept_rd : std_ulogic;
|
||||
variable irq_eoi : std_ulogic;
|
||||
begin
|
||||
v := r;
|
||||
|
||||
v.wb_ack := '0';
|
||||
|
||||
xirr_accept_rd := '0';
|
||||
irq_eoi := '0';
|
||||
|
||||
if wb_in.cyc = '1' and wb_in.stb = '1' then
|
||||
-- wishbone addresses we get are 64 bit alligned, so we
|
||||
-- need to use the sel bits to get 32 bit chunks.
|
||||
v.wb_ack := '1'; -- always ack
|
||||
if wb_in.we = '1' then -- write
|
||||
-- writes to both XIRR are the same
|
||||
if wb_in.adr = XIRR_POLL then
|
||||
report "XICS XIRR_POLL/XIRR write";
|
||||
if wb_in.sel = x"0f" then -- 4 bytes
|
||||
v.cppr := wb_in.dat(31 downto 24);
|
||||
elsif wb_in.sel = x"f0" then -- 4 byte
|
||||
v.cppr := wb_in.dat(63 downto 56);
|
||||
irq_eoi := '1';
|
||||
elsif wb_in.sel = x"01" then -- 1 byte
|
||||
v.cppr := wb_in.dat(7 downto 0);
|
||||
elsif wb_in.sel = x"10" then -- 1 byte
|
||||
v.cppr := wb_in.dat(39 downto 32);
|
||||
end if;
|
||||
|
||||
elsif wb_in.adr = RESV0 then
|
||||
report "XICS MFRR write";
|
||||
if wb_in.sel = x"f0" then -- 4 bytes
|
||||
v.mfrr_pending := '1';
|
||||
v.mfrr := wb_in.dat(63 downto 56);
|
||||
elsif wb_in.sel = x"10" then -- 1 byte
|
||||
v.mfrr_pending := '1';
|
||||
v.mfrr := wb_in.dat(39 downto 32);
|
||||
end if;
|
||||
|
||||
end if;
|
||||
|
||||
else -- read
|
||||
v.wb_rd_data := (others => '0');
|
||||
|
||||
if wb_in.adr = XIRR_POLL then
|
||||
report "XICS XIRR_POLL/XIRR read";
|
||||
if wb_in.sel = x"0f" then
|
||||
v.wb_rd_data(23 downto 0) := r.xisr;
|
||||
v.wb_rd_data(31 downto 24) := r.cppr;
|
||||
elsif wb_in.sel = x"f0" then
|
||||
v.wb_rd_data(55 downto 32) := r.xisr;
|
||||
v.wb_rd_data(63 downto 56) := r.cppr;
|
||||
xirr_accept_rd := '1';
|
||||
elsif wb_in.sel = x"01" then
|
||||
v.wb_rd_data(7 downto 0) := r.cppr;
|
||||
elsif wb_in.sel = x"10" then
|
||||
v.wb_rd_data(39 downto 32) := r.cppr;
|
||||
end if;
|
||||
|
||||
elsif wb_in.adr = RESV0 then
|
||||
report "XICS MFRR read";
|
||||
if wb_in.sel = x"f0" then -- 4 bytes
|
||||
v.wb_rd_data(63 downto 56) := r.mfrr;
|
||||
elsif wb_in.sel = x"10" then -- 1 byte
|
||||
v.wb_rd_data( 7 downto 0) := r.mfrr;
|
||||
end if;
|
||||
end if;
|
||||
end if;
|
||||
end if;
|
||||
|
||||
-- generate interrupt
|
||||
if r.irq = '0' then
|
||||
-- Here we just present any interrupt that's valid and
|
||||
-- below cppr. For ordering, we ignore hardware
|
||||
-- priorities.
|
||||
if unsigned(HW_PRIORITY) < unsigned(r.cppr) then --
|
||||
-- lower HW sources are higher priority
|
||||
for i in LEVEL_NUM - 1 downto 0 loop
|
||||
if int_level_in(i) = '1' then
|
||||
v.irq := '1';
|
||||
v.xisr := std_ulogic_vector(to_unsigned(16 + i, 24));
|
||||
v.pending_priority := HW_PRIORITY; -- hardware HW IRQs
|
||||
end if;
|
||||
end loop;
|
||||
end if;
|
||||
|
||||
-- Do mfrr as a higher priority so mfrr_pending is cleared
|
||||
if unsigned(r.mfrr) < unsigned(r.cppr) then --
|
||||
report "XICS: MFRR INTERRUPT";
|
||||
-- IPI
|
||||
if r.mfrr_pending = '1' then
|
||||
v.irq := '1';
|
||||
v.xisr := x"000002"; -- special XICS MFRR IRQ source number
|
||||
v.pending_priority := r.mfrr;
|
||||
v.mfrr_pending := '0';
|
||||
end if;
|
||||
end if;
|
||||
end if;
|
||||
|
||||
-- Accept the interrupt
|
||||
if xirr_accept_rd = '1' then
|
||||
report "XICS: ACCEPT" &
|
||||
" cppr:" & to_hstring(r.cppr) &
|
||||
" xisr:" & to_hstring(r.xisr) &
|
||||
" mfrr:" & to_hstring(r.mfrr);
|
||||
v.cppr := r.pending_priority;
|
||||
end if;
|
||||
|
||||
if irq_eoi = '1' then
|
||||
v.irq := '0';
|
||||
end if;
|
||||
|
||||
if rst = '1' then
|
||||
v := reg_internal_init;
|
||||
end if;
|
||||
|
||||
r_next <= v;
|
||||
|
||||
end process;
|
||||
|
||||
end architecture behaviour;
|
||||
Loading…
Reference in New Issue