core: Implement the addex instruction

The addex instruction is like adde but uses the XER[OV] bit for the
carry in and out rather than XER[CA].

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
pull/235/head
Paul Mackerras 4 years ago
parent 1a7aebeef8
commit 5fafdc56ef

@ -172,6 +172,7 @@ architecture behaviour of decode1 is
2#1000001010# => (ALU, OP_ADD, RA, RB, NONE, RT, '0', '0', '0', '0', ZERO, '1', NONE, '0', '0', '0', '0', '0', '0', RC, '0', '0'), -- addco
2#0010001010# => (ALU, OP_ADD, RA, RB, NONE, RT, '0', '0', '0', '0', CA, '1', NONE, '0', '0', '0', '0', '0', '0', RC, '0', '0'), -- adde
2#1010001010# => (ALU, OP_ADD, RA, RB, NONE, RT, '0', '0', '0', '0', CA, '1', NONE, '0', '0', '0', '0', '0', '0', RC, '0', '0'), -- addeo
2#0010101010# => (ALU, OP_ADD, RA, RB, NONE, RT, '0', '0', '0', '0', OV, '1', NONE, '0', '0', '0', '0', '0', '0', RC, '0', '0'), -- addex
2#0011101010# => (ALU, OP_ADD, RA, CONST_M1, NONE, RT, '0', '0', '0', '0', CA, '1', NONE, '0', '0', '0', '0', '0', '0', RC, '0', '0'), -- addme
2#1011101010# => (ALU, OP_ADD, RA, CONST_M1, NONE, RT, '0', '0', '0', '0', CA, '1', NONE, '0', '0', '0', '0', '0', '0', RC, '0', '0'), -- addmeo
2#0011001010# => (ALU, OP_ADD, RA, NONE, NONE, RT, '0', '0', '0', '0', CA, '1', NONE, '0', '0', '0', '0', '0', '0', RC, '0', '0'), -- addze

@ -26,7 +26,7 @@ package decode_types is
type input_reg_c_t is (NONE, RS, RCR);
type output_reg_a_t is (NONE, RT, RA, SPR);
type rc_t is (NONE, ONE, RC);
type carry_in_t is (ZERO, CA, ONE);
type carry_in_t is (ZERO, CA, OV, ONE);

constant SH_OFFSET : integer := 0;
constant MB_OFFSET : integer := 1;

@ -164,6 +164,8 @@ architecture behaviour of execute1 is
return '0';
when CA =>
return xerc.ca;
when OV =>
return xerc.ov;
when ONE =>
return '1';
end case;
@ -594,7 +596,13 @@ begin
carry_64 := result_with_carry(64);
if e_in.insn_type = OP_ADD then
if e_in.output_carry = '1' then
set_carry(v.e, carry_32, carry_64);
if e_in.input_carry /= OV then
set_carry(v.e, carry_32, carry_64);
else
v.e.xerc.ov := carry_64;
v.e.xerc.ov32 := carry_32;
v.e.write_xerc_enable := '1';
end if;
end if;
if e_in.oe = '1' then
set_ov(v.e,

Loading…
Cancel
Save