Merge pull request #212 from ozbenh/liteeth

liteeth: Hook up LiteX LiteEth ethernet controller

fpga/arty_a7.xdc

@@ -4,7 +4,7 @@
 
 set_property -dict { PACKAGE_PIN E3  IOSTANDARD LVCMOS33 } [get_ports { ext_clk }];
 
-set_property -dict { PACKAGE_PIN C2  IOSTANDARD LVCMOS33 } [get_ports { ext_rst }];
+set_property -dict { PACKAGE_PIN C2  IOSTANDARD LVCMOS33 } [get_ports { ext_rst_n }];
 
 set_property -dict { PACKAGE_PIN D10 IOSTANDARD LVCMOS33 } [get_ports { uart_main_tx }];
 set_property -dict { PACKAGE_PIN A9  IOSTANDARD LVCMOS33 } [get_ports { uart_main_rx }];
@@ -26,6 +26,15 @@ set_property -dict { PACKAGE_PIN E1  IOSTANDARD LVCMOS33 } [get_ports { led0_b }
 set_property -dict { PACKAGE_PIN F6  IOSTANDARD LVCMOS33 } [get_ports { led0_g }];
 set_property -dict { PACKAGE_PIN G6  IOSTANDARD LVCMOS33 } [get_ports { led0_r }];
 
+################################################################################
+# Normal LEDs
+################################################################################
+
+set_property -dict { PACKAGE_PIN H5  IOSTANDARD LVCMOS33 } [get_ports { led4 }];
+set_property -dict { PACKAGE_PIN J5  IOSTANDARD LVCMOS33 } [get_ports { led5 }];
+set_property -dict { PACKAGE_PIN T9  IOSTANDARD LVCMOS33 } [get_ports { led6 }];
+set_property -dict { PACKAGE_PIN T10 IOSTANDARD LVCMOS33 } [get_ports { led7 }];
+
 ################################################################################
 # SPI Flash
 ################################################################################
@@ -41,6 +50,85 @@ set_property -dict { PACKAGE_PIN M14 IOSTANDARD LVCMOS33 } [get_ports { spi_flas
 set_property IOB true [get_cells -hierarchical -filter {NAME =~*/spi_rxtx/*sck_1*}]
 set_property IOB true [get_cells -hierarchical -filter {NAME =~*/spi_rxtx/input_delay_1.dat_i_l*}]
 
+################################################################################
+# Ethernet (generated by LiteX)
+################################################################################
+
+# eth_ref_clk:0
+set_property LOC G18 [get_ports {eth_ref_clk}]
+set_property IOSTANDARD LVCMOS33 [get_ports {eth_ref_clk}]
+
+# eth_clocks:0.tx
+set_property LOC H16 [get_ports {eth_clocks_tx}]
+set_property IOSTANDARD LVCMOS33 [get_ports {eth_clocks_tx}]
+
+# eth_clocks:0.rx
+set_property LOC F15 [get_ports {eth_clocks_rx}]
+set_property IOSTANDARD LVCMOS33 [get_ports {eth_clocks_rx}]
+
+# eth:0.rst_n
+set_property LOC C16 [get_ports {eth_rst_n}]
+set_property IOSTANDARD LVCMOS33 [get_ports {eth_rst_n}]
+
+# eth:0.mdio
+set_property LOC K13 [get_ports {eth_mdio}]
+set_property IOSTANDARD LVCMOS33 [get_ports {eth_mdio}]
+
+# eth:0.mdc
+set_property LOC F16 [get_ports {eth_mdc}]
+set_property IOSTANDARD LVCMOS33 [get_ports {eth_mdc}]
+
+# eth:0.rx_dv
+set_property LOC G16 [get_ports {eth_rx_dv}]
+set_property IOSTANDARD LVCMOS33 [get_ports {eth_rx_dv}]
+
+# eth:0.rx_er
+set_property LOC C17 [get_ports {eth_rx_er}]
+set_property IOSTANDARD LVCMOS33 [get_ports {eth_rx_er}]
+
+# eth:0.rx_data
+set_property LOC D18 [get_ports {eth_rx_data[0]}]
+set_property IOSTANDARD LVCMOS33 [get_ports {eth_rx_data[0]}]
+
+# eth:0.rx_data
+set_property LOC E17 [get_ports {eth_rx_data[1]}]
+set_property IOSTANDARD LVCMOS33 [get_ports {eth_rx_data[1]}]
+
+# eth:0.rx_data
+set_property LOC E18 [get_ports {eth_rx_data[2]}]
+set_property IOSTANDARD LVCMOS33 [get_ports {eth_rx_data[2]}]
+
+# eth:0.rx_data
+set_property LOC G17 [get_ports {eth_rx_data[3]}]
+set_property IOSTANDARD LVCMOS33 [get_ports {eth_rx_data[3]}]
+
+# eth:0.tx_en
+set_property LOC H15 [get_ports {eth_tx_en}]
+set_property IOSTANDARD LVCMOS33 [get_ports {eth_tx_en}]
+
+# eth:0.tx_data
+set_property LOC H14 [get_ports {eth_tx_data[0]}]
+set_property IOSTANDARD LVCMOS33 [get_ports {eth_tx_data[0]}]
+
+# eth:0.tx_data
+set_property LOC J14 [get_ports {eth_tx_data[1]}]
+set_property IOSTANDARD LVCMOS33 [get_ports {eth_tx_data[1]}]
+
+# eth:0.tx_data
+set_property LOC J13 [get_ports {eth_tx_data[2]}]
+set_property IOSTANDARD LVCMOS33 [get_ports {eth_tx_data[2]}]
+
+# eth:0.tx_data
+set_property LOC H17 [get_ports {eth_tx_data[3]}]
+set_property IOSTANDARD LVCMOS33 [get_ports {eth_tx_data[3]}]
+
+# eth:0.col
+set_property LOC D17 [get_ports {eth_col}]
+set_property IOSTANDARD LVCMOS33 [get_ports {eth_col}]
+
+# eth:0.crs
+set_property LOC G14 [get_ports {eth_crs}]
+set_property IOSTANDARD LVCMOS33 [get_ports {eth_crs}]
 
 ################################################################################
 # DRAM (generated by LiteX)
@@ -326,10 +414,22 @@ set_property CONFIG_MODE SPIx4 [current_design]
 
 create_clock -add -name sys_clk_pin -period 10.00 -waveform {0 5} [get_ports { ext_clk }];
 
+create_clock -name eth_rx_clk -period 40.0 [get_ports { eth_clocks_rx }]
+
+create_clock -name eth_tx_clk -period 40.0 [get_ports { eth_clocks_tx }]
+
+set_clock_groups -group [get_clocks -include_generated_clocks -of [get_nets system_clk]] -group [get_clocks -include_generated_clocks -of [get_nets eth_clocks_rx]] -asynchronous
+
+set_clock_groups -group [get_clocks -include_generated_clocks -of [get_nets system_clk]] -group [get_clocks -include_generated_clocks -of [get_nets eth_clocks_tx]] -asynchronous
+
+set_clock_groups -group [get_clocks -include_generated_clocks -of [get_nets eth_clocks_rx]] -group [get_clocks -include_generated_clocks -of [get_nets eth_clocks_tx]] -asynchronous
+
 ################################################################################
-# False path constraints (from LiteX as they relate to LiteDRAM)
+# False path constraints (from LiteX as they relate to LiteDRAM and LiteEth)
 ################################################################################
 
+set_false_path -quiet -through [get_nets -hierarchical -filter {mr_ff == TRUE}]
+
 set_false_path -quiet -to [get_pins -filter {REF_PIN_NAME == PRE} -of_objects [get_cells -hierarchical -filter {ars_ff1 == TRUE || ars_ff2 == TRUE}]]
 
 set_max_delay 2 -quiet -from [get_pins -filter {REF_PIN_NAME == C} -of_objects [get_cells -hierarchical -filter {ars_ff1 == TRUE}]] -to [get_pins -filter {REF_PIN_NAME == D} -of_objects [get_cells -hierarchical -filter {ars_ff2 == TRUE}]]

fpga/top-arty.vhdl

@@ -21,11 +21,12 @@ entity toplevel is
         SPI_FLASH_OFFSET   : integer := 4194304;
         SPI_FLASH_DEF_CKDV : natural := 1;
         SPI_FLASH_DEF_QUAD : boolean := true;
-        LOG_LENGTH         : natural := 512
+        LOG_LENGTH         : natural := 512;
+        USE_LITEETH        : boolean  := false
         );
     port(
         ext_clk   : in  std_ulogic;
-        ext_rst   : in  std_ulogic;
+        ext_rst_n : in  std_ulogic;
 
         -- UART0 signals:
         uart_main_tx : out std_ulogic;
@@ -35,6 +36,10 @@ entity toplevel is
         led0_b  : out std_ulogic;
         led0_g  : out std_ulogic;
         led0_r  : out std_ulogic;
+        led4    : out std_ulogic;
+        led5    : out std_ulogic;
+        led6    : out std_ulogic;
+        led7    : out std_ulogic;
 
         -- SPI
         spi_flash_cs_n   : out std_ulogic;
@@ -44,6 +49,21 @@ entity toplevel is
         spi_flash_wp_n   : inout std_ulogic;
         spi_flash_hold_n : inout std_ulogic;
 
+        -- Ethernet
+        eth_ref_clk      : out std_ulogic;
+        eth_clocks_tx    : in std_ulogic;
+        eth_clocks_rx    : in std_ulogic;
+        eth_rst_n        : out std_ulogic;
+        eth_mdio         : inout std_ulogic;
+        eth_mdc          : out std_ulogic;
+        eth_rx_dv        : in std_ulogic;
+        eth_rx_er        : in std_ulogic;
+        eth_rx_data      : in std_ulogic_vector(3 downto 0);
+        eth_tx_en        : out std_ulogic;
+        eth_tx_data      : out std_ulogic_vector(3 downto 0);
+        eth_col          : in std_ulogic;
+        eth_crs          : in std_ulogic;
+
         -- DRAM wires
         ddram_a       : out std_ulogic_vector(13 downto 0);
         ddram_ba      : out std_ulogic_vector(2 downto 0);
@@ -70,20 +90,27 @@ architecture behaviour of toplevel is
     signal pll_rst : std_ulogic;
 
     -- Internal clock signals:
-    signal system_clk : std_ulogic;
+    signal system_clk        : std_ulogic;
     signal system_clk_locked : std_ulogic;
+    signal eth_clk_locked    : std_ulogic;
 
-    -- DRAM main data wishbone connection
-    signal wb_dram_in       : wishbone_master_out;
-    signal wb_dram_out      : wishbone_slave_out;
-
-    -- DRAM control wishbone connection
+    -- External IOs from the SoC
     signal wb_ext_io_in        : wb_io_master_out;
     signal wb_ext_io_out       : wb_io_slave_out;
     signal wb_ext_is_dram_csr  : std_ulogic;
     signal wb_ext_is_dram_init : std_ulogic;
     signal wb_ext_is_eth       : std_ulogic;
 
+    -- DRAM main data wishbone connection
+    signal wb_dram_in          : wishbone_master_out;
+    signal wb_dram_out         : wishbone_slave_out;
+
+    -- DRAM control wishbone connection
+    signal wb_dram_ctrl_out    : wb_io_slave_out := wb_io_slave_out_init;
+
+    -- LiteEth connection
+    signal ext_irq_eth         : std_ulogic;
+    signal wb_eth_out          : wb_io_slave_out := wb_io_slave_out_init;
 
     -- Control/status
     signal core_alt_reset : std_ulogic;
@@ -142,7 +169,8 @@ begin
             SPI_FLASH_OFFSET   => SPI_FLASH_OFFSET,
             SPI_FLASH_DEF_CKDV => SPI_FLASH_DEF_CKDV,
             SPI_FLASH_DEF_QUAD => SPI_FLASH_DEF_QUAD,
-            LOG_LENGTH         => LOG_LENGTH
+            LOG_LENGTH         => LOG_LENGTH,
+            USE_LITEETH        => USE_LITEETH
             )
         port map (
             -- System signals
@@ -160,6 +188,9 @@ begin
             spi_flash_sdat_oe => spi_sdat_oe,
             spi_flash_sdat_i  => spi_sdat_i,
 
+            -- External interrupts
+            ext_irq_eth       => ext_irq_eth,
+
             -- DRAM wishbone
             wb_dram_in           => wb_dram_in,
             wb_dram_out          => wb_dram_out,
@@ -167,6 +198,7 @@ begin
             wb_ext_io_out        => wb_ext_io_out,
             wb_ext_is_dram_csr   => wb_ext_is_dram_csr,
             wb_ext_is_dram_init  => wb_ext_is_dram_init,
+            wb_ext_is_eth        => wb_ext_is_eth,
             alt_reset            => core_alt_reset
             );
 
@@ -217,8 +249,8 @@ begin
             port map(
                 ext_clk => ext_clk,
                 pll_clk => system_clk,
-                pll_locked_in => system_clk_locked,
-                ext_rst_in => ext_rst,
+                pll_locked_in => system_clk_locked and eth_clk_locked,
+                ext_rst_in => ext_rst_n,
                 pll_rst_out => pll_rst,
                 rst_out => soc_rst
                 );
@@ -257,6 +289,7 @@ begin
         signal dram_init_done  : std_ulogic;
         signal dram_init_error : std_ulogic;
         signal dram_sys_rst    : std_ulogic;
+        signal rst_gen_rst     : std_ulogic;
     begin
 
         -- Eventually dig out the frequency from the generator
@@ -272,12 +305,22 @@ begin
             port map(
                 ext_clk => ext_clk,
                 pll_clk => system_clk,
-                pll_locked_in => '1',
-                ext_rst_in => ext_rst,
+                pll_locked_in => eth_clk_locked,
+                ext_rst_in => ext_rst_n,
                 pll_rst_out => pll_rst,
-                rst_out => open
+                rst_out => rst_gen_rst
                 );
 
+        -- Generate SoC reset
+        soc_rst_gen: process(system_clk)
+        begin
+            if ext_rst_n = '0' then
+                soc_rst <= '1';
+            elsif rising_edge(system_clk) then
+                soc_rst <= dram_sys_rst or not eth_clk_locked or not system_clk_locked;
+            end if;
+        end process;
+
         dram: entity work.litedram_wrapper
             generic map(
                 DRAM_ABITS => 24,
@@ -289,14 +332,14 @@ begin
                 clk_in          => ext_clk,
                 rst             => pll_rst,
                 system_clk      => system_clk,
-                system_reset    => soc_rst,
+                system_reset    => dram_sys_rst,
                 core_alt_reset  => core_alt_reset,
                 pll_locked      => system_clk_locked,
 
                 wb_in           => wb_dram_in,
                 wb_out          => wb_dram_out,
                 wb_ctrl_in      => wb_ext_io_in,
-                wb_ctrl_out     => wb_ext_io_out,
+                wb_ctrl_out     => wb_dram_ctrl_out,
                 wb_ctrl_is_csr  => wb_ext_is_dram_csr,
                 wb_ctrl_is_init => wb_ext_is_dram_init,
 
@@ -326,6 +369,141 @@ begin
 
     end generate;
 
+    has_liteeth : if USE_LITEETH generate
+
+        component liteeth_core port (
+            sys_clock           : in std_ulogic;
+            sys_reset           : in std_ulogic;
+            mii_eth_clocks_tx   : in std_ulogic;
+            mii_eth_clocks_rx   : in std_ulogic;
+            mii_eth_rst_n       : out std_ulogic;
+            mii_eth_mdio        : in std_ulogic;
+            mii_eth_mdc         : out std_ulogic;
+            mii_eth_rx_dv       : in std_ulogic;
+            mii_eth_rx_er       : in std_ulogic;
+            mii_eth_rx_data     : in std_ulogic_vector(3 downto 0);
+            mii_eth_tx_en       : out std_ulogic;
+            mii_eth_tx_data     : out std_ulogic_vector(3 downto 0);
+            mii_eth_col         : in std_ulogic;
+            mii_eth_crs         : in std_ulogic;
+            wishbone_adr        : in std_ulogic_vector(29 downto 0);
+            wishbone_dat_w      : in std_ulogic_vector(31 downto 0);
+            wishbone_dat_r      : out std_ulogic_vector(31 downto 0);
+            wishbone_sel        : in std_ulogic_vector(3 downto 0);
+            wishbone_cyc        : in std_ulogic;
+            wishbone_stb        : in std_ulogic;
+            wishbone_ack        : out std_ulogic;
+            wishbone_we         : in std_ulogic;
+            wishbone_cti        : in std_ulogic_vector(2 downto 0);
+            wishbone_bte        : in std_ulogic_vector(1 downto 0);
+            wishbone_err        : out std_ulogic;
+            interrupt           : out std_ulogic
+            );
+        end component;
+
+        signal wb_eth_cyc     : std_ulogic;
+        signal wb_eth_adr     : std_ulogic_vector(29 downto 0);
+
+        -- Change this to use a PLL instead of a BUFR to generate the 25Mhz
+        -- reference clock to the PHY.
+        constant USE_PLL : boolean := false;
+    begin
+        eth_use_pll: if USE_PLL generate
+            signal eth_clk_25     : std_ulogic;
+            signal eth_clkfb      : std_ulogic;
+        begin
+            pll_eth : PLLE2_BASE
+                generic map (
+                    BANDWIDTH          => "OPTIMIZED",
+                    CLKFBOUT_MULT      => 16,
+                    CLKIN1_PERIOD      => 10.0,
+                    CLKOUT0_DIVIDE     => 64,
+                    DIVCLK_DIVIDE      => 1,
+                    STARTUP_WAIT       => "FALSE")
+                port map (
+                    CLKOUT0  => eth_clk_25,
+                    CLKOUT1  => open,
+                    CLKOUT2  => open,
+                    CLKOUT3  => open,
+                    CLKOUT4  => open,
+                    CLKOUT5  => open,
+                    CLKFBOUT => eth_clkfb,
+                    LOCKED   => eth_clk_locked,
+                    CLKIN1   => ext_clk,
+                    PWRDWN   => '0',
+                    RST      => pll_rst,
+                    CLKFBIN  => eth_clkfb);
+
+            eth_clk_buf: BUFG
+                port map (
+                    I => eth_clk_25,
+                    O => eth_ref_clk
+                    );
+        end generate;
+
+        eth_use_bufr: if not USE_PLL generate
+            eth_clk_div: BUFR
+                generic map (
+                    BUFR_DIVIDE => "4"
+                    )
+                port map (
+                    I => system_clk,
+                    O => eth_ref_clk,
+                    CE => '1',
+                    CLR => '0'
+                    );
+            eth_clk_locked <= '1';
+        end generate;
+
+        liteeth :  liteeth_core
+            port map(
+                sys_clock         => system_clk,
+                sys_reset         => soc_rst,
+                mii_eth_clocks_tx => eth_clocks_tx,
+                mii_eth_clocks_rx => eth_clocks_rx,
+                mii_eth_rst_n     => eth_rst_n,
+                mii_eth_mdio      => eth_mdio,
+                mii_eth_mdc       => eth_mdc,
+                mii_eth_rx_dv     => eth_rx_dv,
+                mii_eth_rx_er     => eth_rx_er,
+                mii_eth_rx_data   => eth_rx_data,
+                mii_eth_tx_en     => eth_tx_en,
+                mii_eth_tx_data   => eth_tx_data,
+                mii_eth_col       => eth_col,
+                mii_eth_crs       => eth_crs,
+                wishbone_adr      => wb_eth_adr,
+                wishbone_dat_w    => wb_ext_io_in.dat,
+                wishbone_dat_r    => wb_eth_out.dat,
+                wishbone_sel      => wb_ext_io_in.sel,
+                wishbone_cyc      => wb_eth_cyc,
+                wishbone_stb      => wb_ext_io_in.stb,
+                wishbone_ack      => wb_eth_out.ack,
+                wishbone_we       => wb_ext_io_in.we,
+                wishbone_cti      => "000",
+                wishbone_bte      => "00",
+                wishbone_err      => open,
+                interrupt         => ext_irq_eth
+                );
+
+        -- Gate cyc with "chip select" from soc
+        wb_eth_cyc <= wb_ext_io_in.cyc and wb_ext_is_eth;
+
+        -- Remove top address bits as liteeth decoder doesn't know about them
+        wb_eth_adr <= x"000" & "000" & wb_ext_io_in.adr(16 downto 2);
+
+        -- LiteETH isn't pipelined
+        wb_eth_out.stall <= not wb_eth_out.ack;
+
+    end generate;
+
+    no_liteeth : if not USE_LITEETH generate
+        eth_clk_locked <= '1';
+        ext_irq_eth    <= '0';
+    end generate;
+
+    -- Mux WB response on the IO bus
+    wb_ext_io_out <= wb_eth_out when wb_ext_is_eth = '1' else wb_dram_ctrl_out;
+
     leds_pwm : process(system_clk)
     begin
         if rising_edge(system_clk) then
@@ -342,4 +520,9 @@ begin
         end if;
     end process;
 
+    led4 <= system_clk_locked;
+    led5 <= eth_clk_locked;
+    led6 <= not soc_rst;
+    led7 <= not spi_flash_cs_n;
+
 end architecture behaviour;

include/microwatt_soc.h

@@ -15,6 +15,8 @@
 #define XICS_ICS_BASE   0xc0005000  /* Interrupt controller */
 #define SPI_FCTRL_BASE  0xc0006000  /* SPI flash controller registers */
 #define DRAM_CTRL_BASE	0xc8000000  /* LiteDRAM control registers */
+#define LETH_CSR_BASE	0xc8020000  /* LiteEth CSR registers */
+#define LETH_SRAM_BASE	0xc8030000  /* LiteEth MMIO space */
 #define SPI_FLASH_BASE  0xf0000000  /* SPI Flash memory map */
 #define DRAM_INIT_BASE  0xff000000  /* Internal DRAM init firmware */
 
@@ -22,6 +24,7 @@
  * Interrupt numbers
  */
 #define IRQ_UART0       0
+#define IRQ_ETHERNET    1
 
 /*
  * Register definitions for the syscon registers
@@ -33,6 +36,7 @@
 #define   SYS_REG_INFO_HAS_DRAM 		(1ull << 1)
 #define   SYS_REG_INFO_HAS_BRAM 		(1ull << 2)
 #define   SYS_REG_INFO_HAS_SPI_FLASH 		(1ull << 3)
+#define   SYS_REG_INFO_HAS_LITEETH 		(1ull << 4)
 #define SYS_REG_BRAMINFO		0x10
 #define   SYS_REG_BRAMINFO_SIZE_MASK		0xfffffffffffffull
 #define SYS_REG_DRAMINFO		0x18

litedram/gen-src/sdram_init/main.c

@@ -260,6 +260,8 @@ uint64_t main(void)
 		printf("BRAM ");
 	if (ftr & SYS_REG_INFO_HAS_SPI_FLASH)
 		printf("SPIFLASH ");
+	if (ftr & SYS_REG_INFO_HAS_LITEETH)
+		printf("ETHERNET ");
 	printf("\n");
 	if (ftr & SYS_REG_INFO_HAS_BRAM) {
 		val = readq(SYSCON_BASE + SYS_REG_BRAMINFO) & SYS_REG_BRAMINFO_SIZE_MASK;

liteeth/fusesoc-add-files.py

@@ -0,0 +1,27 @@
+#!/usr/bin/python3
+from fusesoc.capi2.generator import Generator
+import os
+import sys
+import pathlib
+
+class LiteEthGenerator(Generator):
+    def run(self):
+        board = self.config.get('board')
+
+        # Collect a bunch of directory path
+        script_dir = os.path.dirname(sys.argv[0])
+        gen_dir = os.path.join(script_dir, "generated", board)
+
+        print("Adding LiteEth for board... ", board)
+
+        # Add files to fusesoc
+        files = []
+        f = os.path.join(gen_dir, "liteeth_core.v")
+        files.append({f : {'file_type' : 'verilogSource'}})
+
+        self.add_files(files)
+
+g = LiteEthGenerator()
+g.run()
+g.write()
+

liteeth/gen-src/arty.yml

@@ -0,0 +1,15 @@
+# This file is Copyright (c) 2020 Florent Kermarrec <florent@enjoy-digital.fr>
+# License: BSD
+
+# PHY ----------------------------------------------------------------------
+phy:        LiteEthPHYMII
+vendor:     xilinx
+# Core ---------------------------------------------------------------------
+clk_freq:   100e6
+core:       wishbone
+endianness: little
+
+soc:
+    mem_map:
+        ethmac: 0x00010000
+    csr_data_width: 32

liteeth/gen-src/generate.sh

@@ -0,0 +1,30 @@
+#!/bin/bash
+
+TARGETS=arty
+
+ME=$(realpath $0)
+echo ME=$ME
+MY_PATH=$(dirname $ME)
+echo MYPATH=$MY_PATH
+PARENT_PATH=$(realpath $MY_PATH/..)
+echo PARENT=$PARENT_PATH
+BUILD_PATH=$PARENT_PATH/build
+mkdir -p $BUILD_PATH
+GEN_PATH=$PARENT_PATH/generated
+mkdir -p $GEN_PATH
+
+for i in $TARGETS
+do
+    TARGET_BUILD_PATH=$BUILD_PATH/$i
+    TARGET_GEN_PATH=$GEN_PATH/$i
+    rm -rf $TARGET_BUILD_PATH
+    rm -rf $TARGET_GEN_PATH
+    mkdir -p $TARGET_BUILD_PATH
+    mkdir -p $TARGET_GEN_PATH
+
+    echo "Generating $i in $TARGET_BUILD_PATH"    
+    liteeth_gen --output-dir=$TARGET_BUILD_PATH $MY_PATH/$i.yml
+
+    cp $TARGET_BUILD_PATH/gateware/liteeth_core.v $TARGET_GEN_PATH/
+done
+	 

liteeth/liteeth.core

@@ -0,0 +1,15 @@
+CAPI=2:
+
+name : :microwatt:liteeth:0
+
+generators:
+  liteeth_gen:
+    interpreter: python3
+    command: fusesoc-add-files.py
+    description: Generate a liteeth ethernet controller
+    usage: |
+      liteeth_gen adds the pre-generated LiteX LiteEth memory controller
+      based on the board type.
+
+      Parameters:
+        board: The board type (arty)

microwatt.core

@@ -100,6 +100,9 @@ filesets:
   litedram:
       depend : [":microwatt:litedram"]
 
+  liteeth:
+      depend : [":microwatt:liteeth"]
+
 targets:
   nexys_a7:
     default_tool: vivado
@@ -141,7 +144,7 @@ targets:
       - no_bram
       - spi_flash_offset=10485760
       - log_length=2048
-    generate: [dram_nexys_video]
+    generate: [litedram_nexys_video]
     tools:
       vivado: {part : xc7a200tsbg484-1}
     toplevel : toplevel
@@ -163,16 +166,17 @@ targets:
 
   arty_a7-35:
     default_tool: vivado
-    filesets: [core, arty_a7, soc, fpga, debug_xilinx, litedram, xilinx_specific]
+    filesets: [core, arty_a7, soc, fpga, debug_xilinx, litedram, liteeth, xilinx_specific]
     parameters :
       - memory_size
       - ram_init_file
       - use_litedram=true
+      - use_liteeth=true
       - disable_flatten_core
       - no_bram
       - spi_flash_offset=3145728
       - log_length=512
-    generate: [dram_arty]
+    generate: [litedram_arty, liteeth_arty]
     tools:
       vivado: {part : xc7a35ticsg324-1L}
     toplevel : toplevel
@@ -194,16 +198,17 @@ targets:
 
   arty_a7-100:
     default_tool: vivado
-    filesets: [core, arty_a7, soc, fpga, debug_xilinx, litedram, xilinx_specific]
+    filesets: [core, arty_a7, soc, fpga, debug_xilinx, litedram, liteeth, xilinx_specific]
     parameters:
       - memory_size
       - ram_init_file
       - use_litedram=true
+      - use_liteeth=true
       - disable_flatten_core
       - no_bram
       - spi_flash_offset=4194304
       - log_length=2048
-    generate: [dram_arty]
+    generate: [litedram_arty, liteeth_arty]
     tools:
       vivado: {part : xc7a100ticsg324-1L}
     toplevel : toplevel
@@ -230,11 +235,15 @@ targets:
     toplevel: core
 
 generate:
-  dram_arty:
+  litedram_arty:
     generator: litedram_gen
     parameters: {board : arty}
 
-  dram_nexys_video:
+  liteeth_arty:
+    generator: liteeth_gen
+    parameters: {board : arty}
+
+  litedram_nexys_video:
     generator: litedram_gen
     parameters: {board : nexys-video}
 
@@ -279,6 +288,12 @@ parameters:
     paramtype   : generic
     default     : false
 
+  use_liteeth:
+    datatype    : bool
+    description : Use liteEth
+    paramtype   : generic
+    default     : false
+
   no_bram:
     datatype    : bool
     description : No internal block RAM (only DRAM and init code carrying payload)

soc.vhdl

@@ -29,6 +29,12 @@ use work.wishbone_types.all;
 
 -- External IO bus:
 -- 0xc8000000: LiteDRAM control (CSRs)
+-- 0xc8020000: LiteEth CSRs (*)
+-- 0xc8030000: LiteEth MMIO (*)
+
+-- (*) LiteEth must be a single aligned 32KB block as the CSRs and MMIOs
+--     are actually decoded as a single wishbone which LiteEth will
+--     internally split based on bit 16.
 
 -- (**) DRAM init code is currently special and goes to the external
 --      IO bus, this will be fixed when it's moved out of litedram and
@@ -37,6 +43,7 @@ use work.wishbone_types.all;
 -- Interrupt numbers:
 --
 --   0  : UART0
+--   1  : Ethernet
 
 entity soc is
     generic (
@@ -53,7 +60,8 @@ entity soc is
         SPI_FLASH_OFFSET   : integer := 0;
         SPI_FLASH_DEF_CKDV : natural := 2;
         SPI_FLASH_DEF_QUAD : boolean := false;
-        LOG_LENGTH         : natural := 512
+        LOG_LENGTH         : natural := 512;
+        HAS_LITEETH        : boolean := false
 	);
     port(
 	rst          : in  std_ulogic;
@@ -68,6 +76,10 @@ entity soc is
 	wb_ext_io_out        : in wb_io_slave_out := wb_io_slave_out_init;
 	wb_ext_is_dram_csr   : out std_ulogic;
 	wb_ext_is_dram_init  : out std_ulogic;
+	wb_ext_is_eth        : out std_ulogic;
+
+        -- External interrupts
+        ext_irq_eth          : in std_ulogic := '0';
 
 	-- UART0 signals:
 	uart0_txd    : out std_ulogic;
@@ -181,6 +193,7 @@ architecture behaviour of soc is
                            SLAVE_IO_EXTERNAL,
                            SLAVE_IO_NONE);
     signal slave_io_dbg : slave_io_type;
+
 begin
 
     resets: process(system_clk)
@@ -298,6 +311,7 @@ begin
 	    wb_io_in.cyc <= wb_master_out.cyc;
 	    wb_master_in <= wb_io_out;
 	end case;
+
     end process slave_top_intercon;
 
     -- IO wishbone slave 64->32 bits converter
@@ -499,6 +513,7 @@ begin
 
 	wb_ext_is_dram_csr   <= '0';
 	wb_ext_is_dram_init  <= '0';
+	wb_ext_is_eth        <= '0';
 
         -- Default response, ack & return all 1's
         wb_sio_in.dat <= (others => '1');
@@ -520,6 +535,12 @@ begin
             elsif wb_sio_out.adr(23 downto 16) = x"00" and HAS_DRAM then
                 wb_ext_is_dram_csr  <= '1';
                 ext_valid := true;
+            elsif wb_sio_out.adr(23 downto 16) = x"02" and HAS_LITEETH then
+                wb_ext_is_eth       <= '1';
+                ext_valid := true;
+            elsif wb_sio_out.adr(23 downto 16) = x"03" and HAS_LITEETH then
+                wb_ext_is_eth       <= '1';
+                ext_valid := true;
             end if;
             if ext_valid then
                 wb_ext_io_in.cyc <= wb_sio_out.cyc;
@@ -564,7 +585,8 @@ begin
 	    DRAM_INIT_SIZE => DRAM_INIT_SIZE,
 	    CLK_FREQ => CLK_FREQ,
 	    HAS_SPI_FLASH => HAS_SPI_FLASH,
-	    SPI_FLASH_OFFSET => SPI_FLASH_OFFSET
+	    SPI_FLASH_OFFSET => SPI_FLASH_OFFSET,
+            HAS_LITEETH => HAS_LITEETH
 	)
 	port map(
 	    clk => system_clk,
@@ -657,6 +679,7 @@ begin
     begin
         int_level_in <= (others => '0');
         int_level_in(0) <= uart0_irq;
+        int_level_in(1) <= ext_irq_eth;
     end process;
 
     -- BRAM Memory slave

syscon.vhdl

@@ -16,7 +16,8 @@ entity syscon is
 	DRAM_SIZE        : integer;
 	DRAM_INIT_SIZE   : integer;
         HAS_SPI_FLASH    : boolean;
-        SPI_FLASH_OFFSET : integer
+        SPI_FLASH_OFFSET : integer;
+	HAS_LITEETH      : boolean
 	);
     port (
 	clk : in std_ulogic;
@@ -56,6 +57,7 @@ architecture behaviour of syscon is
     constant SYS_REG_INFO_HAS_DRAM    : integer := 1;
     constant SYS_REG_INFO_HAS_BRAM    : integer := 2;
     constant SYS_REG_INFO_HAS_SPIF    : integer := 3;
+    constant SYS_REG_INFO_HAS_LETH    : integer := 4;
 
     -- BRAMINFO contains the BRAM size in the bottom 52 bits
     -- DRAMINFO contains the DRAM size if any in the bottom 52 bits
@@ -89,6 +91,7 @@ architecture behaviour of syscon is
     signal info_has_bram : std_ulogic;
     signal info_has_uart : std_ulogic;
     signal info_has_spif : std_ulogic;
+    signal info_has_leth : std_ulogic;
     signal info_clk      : std_ulogic_vector(39 downto 0);
     signal info_fl_off   : std_ulogic_vector(31 downto 0);
 
@@ -102,16 +105,19 @@ begin
     core_reset <= reg_ctrl(SYS_REG_CTRL_CORE_RESET);
 
     -- Info register is hard wired
-    info_has_uart <= '1' when HAS_UART else '0';
-    info_has_dram <= '1' when HAS_DRAM else '0';
+    info_has_uart <= '1' when HAS_UART       else '0';
+    info_has_dram <= '1' when HAS_DRAM       else '0';
     info_has_bram <= '1' when BRAM_SIZE /= 0 else '0';
-    info_has_spif <= '1' when HAS_SPI_FLASH else '0';
+    info_has_spif <= '1' when HAS_SPI_FLASH  else '0';
+    info_has_leth <= '1' when HAS_LITEETH    else '0';
     info_clk <= std_ulogic_vector(to_unsigned(CLK_FREQ, 40));
     reg_info <= (SYS_REG_INFO_HAS_UART  => info_has_uart,
 		 SYS_REG_INFO_HAS_DRAM  => info_has_dram,
                  SYS_REG_INFO_HAS_BRAM  => info_has_bram,
                  SYS_REG_INFO_HAS_SPIF  => info_has_spif,
+                 SYS_REG_INFO_HAS_LETH  => info_has_leth,
 		 others => '0');
+
     reg_braminfo <= x"000" & std_ulogic_vector(to_unsigned(BRAM_SIZE, 52));
     reg_draminfo <= x"000" & std_ulogic_vector(to_unsigned(DRAM_SIZE, 52)) when HAS_DRAM
 		    else (others => '0');