Wishbone debug module

This adds a debug module off the DMI (debug) bus which can act as a
wishbone master to generate read and write cycles.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
pull/69/head
Benjamin Herrenschmidt 5 years ago
parent ee52fd4d80
commit b46f81fae4

@ -41,12 +41,13 @@ simple_ram_behavioural_helpers.o:
simple_ram_behavioural_tb.o: wishbone_types.o simple_ram_behavioural.o
simple_ram_behavioural.o: wishbone_types.o simple_ram_behavioural_helpers.o
sim_uart.o: wishbone_types.o sim_console.o
soc.o: common.o wishbone_types.o core.o wishbone_arbiter.o sim_uart.o simple_ram_behavioural.o dmi_dtm_xilinx.o
soc.o: common.o wishbone_types.o core.o wishbone_arbiter.o sim_uart.o simple_ram_behavioural.o dmi_dtm_xilinx.o wishbone_debug_master.o
wishbone_arbiter.o: wishbone_types.o
wishbone_types.o:
writeback.o: common.o
dmi_dtm_tb.o: dmi_dtm_xilinx.o
dmi_dtm_tb.o: dmi_dtm_xilinx.o wishbone_debug_master.o
dmi_dtm_xilinx.o: sim-unisim/unisim_vcomponents.o
wishbone_debug_master.o: wishbone_types.o

UNISIM_BITS = sim-unisim/unisim_vcomponents.vhdl sim-unisim/BSCANE2.vhdl sim-unisim/BUFG.vhdl
sim-unisim/unisim_vcomponents.o: $(UNISIM_BITS)
@ -79,8 +80,8 @@ simple_ram_tb: simple_ram_tb.o
simple_ram_behavioural_tb: simple_ram_behavioural_helpers_c.o simple_ram_behavioural_tb.o
$(GHDL) -e $(GHDLFLAGS) -Wl,simple_ram_behavioural_helpers_c.o $@

dmi_dtm_tb: dmi_dtm_tb.o
$(GHDL) -e $(GHDLFLAGS) $@
dmi_dtm_tb: dmi_dtm_tb.o simple_ram_behavioural_helpers_c.o
$(GHDL) -e $(GHDLFLAGS) -Wl,simple_ram_behavioural_helpers_c.o $@

tests = $(sort $(patsubst tests/%.out,%,$(wildcard tests/*.out)))


@ -50,9 +50,23 @@ begin
dmi_ack => dmi_ack
);

-- Dummy loopback until a debug module is present
dmi_din <= dmi_dout;
dmi_ack <= dmi_ack;
simple_ram_0: entity work.mw_soc_memory
generic map(RAM_INIT_FILE => "simple_ram_behavioural.bin",
MEMORY_SIZE => 524288)
port map(clk => clk, rst => rst,
wishbone_in => wishbone_ram_out,
wishbone_out => wishbone_ram_in);

wishbone_debug_0: entity work.wishbone_debug_master
port map(clk => clk, rst => rst,
dmi_addr => dmi_addr(1 downto 0),
dmi_dout => dmi_din,
dmi_din => dmi_dout,
dmi_wr => dmi_wr,
dmi_ack => dmi_ack,
dmi_req => dmi_req,
wb_in => wishbone_ram_in,
wb_out => wishbone_ram_out);

-- system clock
sys_clk: process
@ -209,6 +223,28 @@ begin
-- send command
dmi_read(x"00", data);
report "Read addr reg:" & to_hstring(data);
report "Writing addr reg to all 1's";
dmi_write(x"00", (others => '1'));
dmi_read(x"00", data);
report "Read addr reg:" & to_hstring(data);

report "Writing ctrl reg to all 1's";
dmi_write(x"02", (others => '1'));
dmi_read(x"02", data);
report "Read ctrl reg:" & to_hstring(data);

report "Read memory at 0...\n";
dmi_write(x"00", x"0000000000000000");
dmi_write(x"02", x"00000000000007ff");
dmi_read(x"01", data);
report "00:" & to_hstring(data);
dmi_read(x"01", data);
report "08:" & to_hstring(data);
dmi_read(x"01", data);
report "10:" & to_hstring(data);
dmi_read(x"01", data);
report "18:" & to_hstring(data);
clock(10);
std.env.finish;
end process;
end behave;

@ -25,6 +25,7 @@ filesets:
- multiply.vhdl
- writeback.vhdl
- insn_helpers.vhdl
- wishbone_debug_master.vhdl
- core.vhdl
- icache.vhdl
file_type : vhdlSource-2008
@ -32,6 +33,7 @@ filesets:
soc:
files:
- wishbone_arbiter.vhdl
- wishbone_debug_master.vhdl
- soc.vhdl
file_type : vhdlSource-2008


@ -54,8 +54,49 @@ def main():
urc.set_instruction("USER2")
urc.shift_ir()

print("Reading 0x00: %x" % do_read(urc, 0))
print("Reading 0xaa: %x" % do_read(urc, 0xaa))
print("Reading memory at 0:")
do_write(urc, 0, 0)
do_write(urc, 2, 0x7ff)
print("00: %016x" % do_read(urc, 1))
print("08: %016x" % do_read(urc, 1))
print("10: %016x" % do_read(urc, 1))
print("18: %016x" % do_read(urc, 1))
do_write(urc, 0, 0x10)
do_write(urc, 1, 0xabcdef0123456789)
do_write(urc, 0, 0)
do_write(urc, 2, 0x7ff)
print("00: %016x" % do_read(urc, 1))
print("08: %016x" % do_read(urc, 1))
print("10: %016x" % do_read(urc, 1))
print("18: %016x" % do_read(urc, 1))
# urc.set_dr_in(0,73,0);
# print("Test DR_IN 1:", urc.get_dr_in_string())
# urc.set_dr_in(0xa,3,0);
# print("Test DR_IN 2:", urc.get_dr_in_string())
# urc.set_dr_in(0x5,7,4);
# print("Test DR_IN 3:", urc.get_dr_in_string())
# urc.set_dr_in(1,73,73);
# print("Test DR_IN 4:", urc.get_dr_in_string())
# print("Reading ADDR reg: %x" % do_read(urc, 0))
# print("Writing all 1's to it:")
# do_write(urc, 0, 0xffffffffffffffff)
# print("Reading ADDR reg: %x" % do_read(urc, 0))
# print("Writing 0xabcdef0123456789 to it:")
# do_write(urc, 0, 0xabcdef0123456789)
# print("Reading ADDR reg: %x" % do_read(urc, 0))



# urc.set_dr_in(0x1,41,0)
# print("Sending:", urc.get_dr_in_string())
# urc.shift_dr()
# urc.set_dr_in(0x0,41,0)
# urc.shift_dr()
# print("Got1:", urc.get_dr_out_string())
# urc.shift_dr()
# print("Got2:", hex(urc.get_dr_out()))

if __name__ == "__main__":

@ -92,10 +92,6 @@ begin
wb_out => wb_master_out, wb_in => wb_master_in
);

-- Dummy wishbone debug module
wishbone_debug_out.cyc <= '0';
wishbone_debug_out.stb <= '0';

-- Wishbone slaves address decoder & mux
slave_intercon: process(wb_master_out, wb_bram_out, wb_uart0_out)
-- Selected slave
@ -202,8 +198,17 @@ begin
dmi_ack => dmi_ack
);

-- Dummy loopback until a debug module is present
dmi_din <= dmi_dout;
dmi_ack <= dmi_ack;
-- Wishbone debug master (TODO: Add a DMI address decoder)
wishbone_debug: entity work.wishbone_debug_master
port map(clk => system_clk, rst => rst,
dmi_addr => dmi_addr(1 downto 0),
dmi_dout => dmi_din,
dmi_din => dmi_dout,
dmi_wr => dmi_wr,
dmi_ack => dmi_ack,
dmi_req => dmi_req,
wb_in => wishbone_debug_in,
wb_out => wishbone_debug_out);


end architecture behaviour;

@ -0,0 +1,167 @@
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;

library work;
use work.wishbone_types.all;

entity wishbone_debug_master is
port(clk : in std_ulogic;
rst : in std_ulogic;

-- Debug bus interface
dmi_addr : in std_ulogic_vector(1 downto 0);
dmi_din : in std_ulogic_vector(63 downto 0);
dmi_dout : out std_ulogic_vector(63 downto 0);
dmi_req : in std_ulogic;
dmi_wr : in std_ulogic;
dmi_ack : out std_ulogic;

-- Wishbone master interface
wb_out : out wishbone_master_out;
wb_in : in wishbone_slave_out
);
end entity wishbone_debug_master;

architecture behaviour of wishbone_debug_master is

-- ** Register offsets definitions. All registers are 64-bit
constant DBG_WB_ADDR : std_ulogic_vector(1 downto 0) := "00";
constant DBG_WB_DATA : std_ulogic_vector(1 downto 0) := "01";
constant DBG_WB_CTRL : std_ulogic_vector(1 downto 0) := "10";
constant DBG_WB_RSVD : std_ulogic_vector(1 downto 0) := "11";

-- CTRL register:
--
-- bit 0..7 : SEL bits (byte enables)
-- bit 8 : address auto-increment
-- bit 10..9 : auto-increment value:
-- 00 - +1
-- 01 - +2
-- 10 - +4
-- 11 - +8

-- ** Address and control registers and read data
signal reg_addr : std_ulogic_vector(63 downto 0);
signal reg_ctrl_out : std_ulogic_vector(63 downto 0);
signal reg_ctrl : std_ulogic_vector(10 downto 0);
signal data_latch : std_ulogic_vector(63 downto 0);
type state_t is (IDLE, WB_CYCLE, DMI_WAIT);
signal state : state_t;

begin

-- Hard wire unused bits to 0
reg_ctrl_out <= (63 downto 11 => '0',
10 downto 0 => reg_ctrl);

-- DMI read data mux
with dmi_addr select dmi_dout <=
reg_addr when DBG_WB_ADDR,
data_latch when DBG_WB_DATA,
reg_ctrl_out when DBG_WB_CTRL,
(others => '0') when others;

-- ADDR and CTRL register writes
reg_write : process(clk)
subtype autoinc_inc_t is integer range 1 to 8;
function decode_autoinc(c : std_ulogic_vector(1 downto 0))
return autoinc_inc_t is
begin
case c is
when "00" => return 1;
when "01" => return 2;
when "10" => return 4;
when "11" => return 8;
-- Below shouldn't be necessary but GHDL complains
when others => return 8;
end case;
end function decode_autoinc;
begin
if rising_edge(clk) then
if (rst) then
reg_addr <= (others => '0');
reg_ctrl <= (others => '0');
else -- Standard register writes
if dmi_req and dmi_wr then
if dmi_addr = DBG_WB_ADDR then
reg_addr <= dmi_din;
elsif dmi_addr = DBG_WB_CTRL then
reg_ctrl <= dmi_din(10 downto 0);
end if;
end if;
-- Address register auto-increment
if state = WB_CYCLE and (wb_in.ack and reg_ctrl(8))= '1' then
reg_addr <= std_ulogic_vector(unsigned(reg_addr) +
decode_autoinc(reg_ctrl(10 downto 9)));
end if;
end if;
end if;
end process;

-- ACK is hard wired to req for register writes. For data read/writes
-- (aka commands), it's sent when the state machine got the WB ack.
--
-- Note: We never set it to 1, we just pass dmi_req back when acking.
-- This fullfills two purposes:
--
-- * Avoids polluting the ack signal when another DMI slave is
-- selected. This allows the decoder to just OR all the acks
-- together rather than mux them.
--
-- * Makes ack go down on the same cycle as req goes down, thus
-- saving a clock cycle. This is safe because we know that
-- the state machine will no longer be in DMI_WAIT state on
-- the next cycle, so we won't be bouncing the signal back up.
--
dmi_ack <= dmi_req when (dmi_addr /= DBG_WB_DATA or state = DMI_WAIT) else '0';

-- Some WB signals are direct wires from registers or DMI
wb_out.adr <= reg_addr;
wb_out.dat <= dmi_din;
wb_out.sel <= reg_ctrl(7 downto 0);
wb_out.we <= dmi_wr;

-- We always move WB cyc and stb simultaneously (no pipelining yet...)
wb_out.cyc <= '1' when state = WB_CYCLE else '0';
wb_out.stb <= '1' when state = WB_CYCLE else '0';

-- Data latch. WB will take the read data away as soon as the cycle
-- terminates but we must maintain it on DMI until req goes down, so
-- we latch it. (Q: Should we move that latch to dmi_dtm itself ?)
--
latch_reads : process(clk)
begin
if rising_edge(clk) then
if state = WB_CYCLE and wb_in.ack = '1' and dmi_wr = '0' then
data_latch <= wb_in.dat;
end if;
end if;
end process;

-- Command state machine (generate wb_cyc)
wb_trigger : process(clk)
begin
if rising_edge(clk) then
if (rst) then
state <= IDLE;
else
case state is
when IDLE =>
if dmi_req = '1' and dmi_addr = DBG_WB_DATA then
state <= WB_CYCLE;
end if;
when WB_CYCLE =>
if wb_in.ack then
state <= DMI_WAIT;
end if;
when DMI_WAIT =>
if dmi_req = '0' then
state <= IDLE;
end if;
end case;
end if;
end if;
end process;
end architecture behaviour;
Loading…
Cancel
Save