Commit Graph

9 Commits (326dec4b3b5a3b157b5bbe58a4bc67e3d056cf7e)

Author SHA1 Message Date
Paul Mackerras 374f4c536d writeback: Do data formatting and condition recording in writeback
This adds code to writeback to format data and test the result
against zero for the purpose of setting CR0.  The data formatter
is able to shift and mask by bytes and do byte reversal and sign
extension.  It can also put together bytes from two input
doublewords to support unaligned loads (including unaligned
byte-reversed loads).

The data formatter starts with an 8:1 multiplexer that is able
to direct any byte of the input to any byte of the output.  This
lets us rotate the data and simultaneously byte-reverse it.
The rotated/reversed data goes to a register for the unaligned
cases that overlap two doublewords.  Then there is per-byte logic
that does trimming, sign extension, and splicing together bytes
from a previous input doubleword (stored in data_latched) and the
current doubleword.  Finally the 64-bit result is tested to set
CR0 if rc = 1.

This removes the RC logic from the execute2, multiply and divide
units, and the shift/mask/byte-reverse/sign-extend logic from
loadstore2.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
5 years ago
Paul Mackerras 9789d258fb loadstore2: Do data formatting after a register stage
This moves the data formatting for read data to after a register,
instead of before, in order to improve timing.  The data formatting
is now effectively combinational logic on the input side of the
writeback stage.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
5 years ago
Anton Blanchard 6e442e07a5 Reformat loadstore2
Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
5 years ago
Anton Blanchard e1a71e4545 loads don't do both byte reversal and sign extension
Give the synthesis tools a clue that we don't need to do both byte reversal
and sign extension.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
5 years ago
Anton Blanchard a061924a78 Move byte reversal of stores to first cycle
We are seeing some timing issues with the second cycle of loadstore,
and  we aren't doing much in the first cycle, so move it here.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
5 years ago
Anton Blanchard fb4cad6eaf Remove second write port
We only need two write ports for load with update instructions.
Having two write ports just for this instruction is expensive.

For now we will force them to be the only instruction in the
pipeline, and take two cycles of writeback.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
5 years ago
Anton Blanchard 021d427d3f Stores need to wait for wishbone write ack
I wasn't waiting to get a wishbone ack back on stores before continuing.
This creates all sorts of problems when we add pipelining and send
loads and stores down the pipe faster.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
5 years ago
Michael Neuling 4d5abfb430 Remove dynamic ranges from code
Some VHDL compilers like verific [1] don't like these, so let's remove
them. Lots of random code changes, but passes make check.

Also add basic script to run verific and generate verilog.

1. https://www.verific.com/

Signed-off-by: Michael Neuling <mikey@neuling.org>
5 years ago
Anton Blanchard 5a29cb4699 Initial import of microwatt
Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
5 years ago