Commit Graph

3 Commits (63f10450a6e04d57c8cb3e11a9ddc7d7f95a21ac)

Author SHA1 Message Date
Benjamin Herrenschmidt a93d9e77c9 litedram: Remove remnants of riscv-inits
We still had some wires bringing an extra serial port out of
litedram for the built-in riscv processor. This is all gone now
so take them out.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
5 years ago
Benjamin Herrenschmidt b0e15f2fb5 litedram: Make the L2 twice as tall
This increases the number of L2 lines from 32 to 64. The BRAM usage is the
same as they were only half used. There's an increase in LUTs and registers
due to the extra tags and valid bits, but none of it should be in a
space constrained or critical timing path.

We could make it wider instead (256 bytes lines) which would reduce usage
instead, but this increases the latency by 8 cycles. Something to consider
once the L2 is capable of early response on miss and starting reloads
from any point in a line.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
5 years ago
Benjamin Herrenschmidt 599fad117b litedram: Remove old "VexRiscV" based initializations
Support for this has bitrotted and would require refactoring of L2 to
be brought back. It's also not really needed anymore now that we ship
pre-generated litedram and that LiteX supports what we do.

So take it out, which simplifies some of the scripts as well. This also
fixes up CSR alignment the sim model.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
5 years ago