Commit Graph

13 Commits (d745995207b121e6b53a104c9ddfc8b9840693a2)

Author SHA1 Message Date
Paul Mackerras ca4eb46aea Make wishbone addresses be in units of doublewords or words
This makes the 64-bit wishbone buses have the address expressed in
units of doublewords (64 bits), and similarly for the 32-bit buses the
address is in units of words (32 bits).  This is to comply with the
wishbone spec.  Previously the addresses on the wishbone buses were in
units of bytes regardless of the bus data width, which is not correct
and caused problems with interfacing with externally-generated logic.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2 years ago
Paul Mackerras 21ed730514 arty_a7: Add litesdcard interface
This adds litesdcard.v generated from the litex/litesdcard project,
along with logic in top-arty.vhdl to connect it into the system.
There is now a DMA wishbone coming in to soc.vhdl which is narrower
than the other wishbone masters (it has 32-bit data rather than
64-bit) so there is a widening/narrowing adapter between it and the
main wishbone master arbiter.

Also, litesdcard generates a non-pipelined wishbone for its DMA
connection, which needs to be converted to a pipelined wishbone.  We
have a latch on both the incoming and outgoing sides of the wishbone
in order to help make timing (at the cost of two extra cycles of
latency).

litesdcard generates an interrupt signal which is wired up to input 3
of the ICS (IRQ 19).

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
3 years ago
Anton Blanchard c6dfc19d89 Make wishbone_master_out and wb_io_master_out match
This makes it easier to parse the records in verilog because they
are getting flattened into an array of bits by ghdl/yosys.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
3 years ago
Benjamin Herrenschmidt bf7def5503 soc: Don't require dram wishbones signals to be wired by toplevel
Currently, when not using litedram, the top level still has to hook
up "dummy" wishbones to the main dram and control dram busses coming
out of the SoC and provide ack signals.

Instead, make the SoC generate the acks internally when not using
litedram and use defaults to make the wiring entirely optional.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
4 years ago
Benjamin Herrenschmidt 573b6b4bc4 soc: Rework interconnect
This changes the SoC interconnect such that the main 64-bit wishbone out
of the processor is first split between only 3 slaves (BRAM, DRAM and a
general "IO" bus) instead of all the slaves in the SoC.

The IO bus leg is then latched and down-converted to 32 bits data width,
before going through a second address decoder for the various IO devices.

This significantly reduces routing and timing pressure on the main bus,
allowing to get rid of frequent timing violations when synthetizing on
small'ish FPGAs such as the Artix-7 35T found on the original Arty board.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
4 years ago
Jonathan Balkind cc532dd065 Changes for compilation with VCS:
- Changing use of others in core files to satisfy VCS
- Adding workaround for VCS subtype constraint inconsistencies in common.vhdl

Signed-off-by: Jonathan Balkind <jbalkind@princeton.edu>
4 years ago
Benjamin Herrenschmidt bc2acfde2f wb_arbiter: Make arbiter size parametric
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
4 years ago
Benjamin Herrenschmidt 79101041d6 wishbone: Add stall signal
Pipelined wishbone needs it

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
4 years ago
Benjamin Herrenschmidt 6dd0b514ac Reduce wishbone address size to 32-bit
For now ... it reduces the routing pressure on the FPGA

This needs manual adjustment of the address decoder in soc.vhdl, at
least until I can figure out how to deal with std_match

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

# Conflicts:
#	soc.vhdl

# Conflicts:
#	soc.vhdl
4 years ago
Benjamin Herrenschmidt b513f0fb48 dcache: Add a dcache
This replaces loadstore2 with a dcache

The dcache unit is losely based on the icache one (same basic cache
layout), but has some significant logic additions to deal with stores,
loads with update, non-cachable accesses and other differences due to
operating in the execution part of the pipeline rather than the fetch
part.

The cache is store-through, though a hit with an existing line will
update the line rather than invalidate it.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
4 years ago
Anton Blanchard df1165bdfc Reformat wishbone code
Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
4 years ago
Anton Blanchard 142a722ce4 Remove names from end record statements
These are optional, and vhdlpp from iverilog barfs on them.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
4 years ago
Anton Blanchard 5a29cb4699 Initial import of microwatt
Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
4 years ago