You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
24a34899b4
The protocol used by the spi bridge firmware changed as of openocd v0.11. As this is the version packaged by Debian Bullseye, add the firmware for convince. Signed-off-by: Joel Stanley <joel@jms.id.au> |
4 years ago | |
|---|---|---|
| .. | ||
| LFE5U-25F.cfg | 5 years ago | |
| LFE5U-45F.cfg | 5 years ago | |
| LFE5U-85F.cfg | 5 years ago | |
| LFE5UM-25F.cfg | 5 years ago | |
| LFE5UM-45F.cfg | 5 years ago | |
| LFE5UM-85F.cfg | 5 years ago | |
| LFE5UM5G-25F.cfg | 5 years ago | |
| LFE5UM5G-45F.cfg | 5 years ago | |
| LFE5UM5G-85F.cfg | 5 years ago | |
| README | 4 years ago | |
| bscan_spi_xc7a35t.bit | 5 years ago | |
| bscan_spi_xc7a35t_openocd_v0.11.bit | 4 years ago | |
| bscan_spi_xc7a100t.bit | 5 years ago | |
| bscan_spi_xc7a100t_openocd_v0.11.bit | 4 years ago | |
| bscan_spi_xc7a200t.bit | 5 years ago | |
| bscan_spi_xc7a200t_openocd_v0.11.bit | 4 years ago | |
| ecp5-evn.cfg | 5 years ago | |
| flash-arty | 4 years ago | |
| jtagspi.cfg | 5 years ago | |
| olimex-arm-usb-tiny-h.cfg | 5 years ago | |
| xilinx-xc7.cfg | 4 years ago | |
README
The Xilinx SPI flashing proxies come from here:
https://github.com/quartiq/bscan_spi_bitstreams/blob/single-tap/bscan_spi_xc7a35t.bit?raw=true
https://github.com/quartiq/bscan_spi_bitstreams/blob/single-tap/bscan_spi_xc7a100t.bit?raw=true
These are the "old" single tap versions that are supported by the openocd
release packaged in distros (0.10). If you use the wrong versions you see this:
$ ./openocd/flash-arty microwatt_0.bit
Open On-Chip Debugger 0.10.0
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
none separate
Info : auto-selecting first available session transport "jtag". To override use 'transport select <transport>'.
adapter speed: 25000 kHz
fpga_program
Info : ftdi: if you experience problems at higher adapter clocks, try the command "ftdi_tdo_sample_edge falling"
Info : clock speed 25000 kHz
Info : JTAG tap: xc7.tap tap/device found: 0x0362d093 (mfg: 0x049 (Xilinx), part: 0x362d, ver: 0x0)
loaded file openocd/bscan_spi_xc7a35t.bit to pld device 0 in 0s 152803us
Info : JTAG tap: xc7.tap tap/device found: 0x0362d093 (mfg: 0x049 (Xilinx), part: 0x362d, ver: 0x0)
Error: Unknown flash device (ID 0x00ffffff)
If you find yourself with a later openocd version that contians 867bdb2e9248
("jtagspi: new protocol that includes transfer length"), such as v0.11 as
packaged by Debian Bullseye, you should use the bitstream from the master
branch:
https://github.com/quartiq/bscan_spi_bitstreams/blob/master/bscan_spi_xc7a35t.bit?raw=true
https://github.com/quartiq/bscan_spi_bitstreams/blob/master/bscan_spi_xc7a100t.bit?raw=true
These are in the microwatt repository as bscan_spi_xc7a*t_openocd_v0.11.bit.