You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
586 lines
20 KiB
VHDL
586 lines
20 KiB
VHDL
library ieee;
|
|
use ieee.std_logic_1164.all;
|
|
use ieee.numeric_std.all;
|
|
|
|
library unisim;
|
|
use unisim.vcomponents.all;
|
|
|
|
library work;
|
|
use work.wishbone_types.all;
|
|
|
|
entity toplevel is
|
|
generic (
|
|
MEMORY_SIZE : integer := 16384;
|
|
RAM_INIT_FILE : string := "firmware.hex";
|
|
RESET_LOW : boolean := true;
|
|
CLK_FREQUENCY : positive := 100000000;
|
|
HAS_FPU : boolean := true;
|
|
HAS_BTC : boolean := true;
|
|
USE_LITEDRAM : boolean := false;
|
|
NO_BRAM : boolean := false;
|
|
DISABLE_FLATTEN_CORE : boolean := false;
|
|
SPI_FLASH_OFFSET : integer := 10485760;
|
|
SPI_FLASH_DEF_CKDV : natural := 1;
|
|
SPI_FLASH_DEF_QUAD : boolean := true;
|
|
LOG_LENGTH : natural := 2048;
|
|
UART_IS_16550 : boolean := true;
|
|
USE_LITEETH : boolean := false;
|
|
USE_LITESDCARD : boolean := false
|
|
);
|
|
port(
|
|
ext_clk : in std_ulogic;
|
|
ext_rst_n : in std_ulogic;
|
|
|
|
-- UART0 signals:
|
|
uart_main_tx : out std_ulogic;
|
|
uart_main_rx : in std_ulogic;
|
|
|
|
-- LEDs
|
|
led0 : out std_ulogic;
|
|
led1 : out std_ulogic;
|
|
led2 : out std_ulogic;
|
|
led3 : out std_ulogic;
|
|
led4 : out std_ulogic;
|
|
led5 : out std_ulogic;
|
|
led6 : out std_ulogic;
|
|
led7 : out std_ulogic;
|
|
|
|
-- SPI
|
|
spi_flash_cs_n : out std_ulogic;
|
|
spi_flash_mosi : inout std_ulogic;
|
|
spi_flash_miso : inout std_ulogic;
|
|
spi_flash_wp_n : inout std_ulogic;
|
|
spi_flash_hold_n : inout std_ulogic;
|
|
|
|
-- Ethernet
|
|
eth_clocks_tx : out std_ulogic;
|
|
eth_clocks_rx : in std_ulogic;
|
|
eth_rst_n : out std_ulogic;
|
|
eth_int_n : in std_ulogic;
|
|
eth_mdio : inout std_ulogic;
|
|
eth_mdc : out std_ulogic;
|
|
eth_rx_ctl : in std_ulogic;
|
|
eth_rx_data : in std_ulogic_vector(3 downto 0);
|
|
eth_tx_ctl : out std_ulogic;
|
|
eth_tx_data : out std_ulogic_vector(3 downto 0);
|
|
|
|
-- SD card
|
|
sdcard_data : inout std_ulogic_vector(3 downto 0);
|
|
sdcard_cmd : inout std_ulogic;
|
|
sdcard_clk : out std_ulogic;
|
|
sdcard_cd : in std_ulogic;
|
|
sdcard_reset : out std_ulogic;
|
|
|
|
-- DRAM wires
|
|
ddram_a : out std_logic_vector(14 downto 0);
|
|
ddram_ba : out std_logic_vector(2 downto 0);
|
|
ddram_ras_n : out std_logic;
|
|
ddram_cas_n : out std_logic;
|
|
ddram_we_n : out std_logic;
|
|
ddram_dm : out std_logic_vector(1 downto 0);
|
|
ddram_dq : inout std_logic_vector(15 downto 0);
|
|
ddram_dqs_p : inout std_logic_vector(1 downto 0);
|
|
ddram_dqs_n : inout std_logic_vector(1 downto 0);
|
|
ddram_clk_p : out std_logic;
|
|
ddram_clk_n : out std_logic;
|
|
ddram_cke : out std_logic;
|
|
ddram_odt : out std_logic;
|
|
ddram_reset_n : out std_logic
|
|
);
|
|
end entity toplevel;
|
|
|
|
architecture behaviour of toplevel is
|
|
|
|
-- Reset signals:
|
|
signal soc_rst : std_ulogic;
|
|
signal pll_rst : std_ulogic;
|
|
|
|
-- Internal clock signals:
|
|
signal system_clk : std_ulogic;
|
|
signal system_clk_locked : std_ulogic;
|
|
|
|
-- External IOs from the SoC
|
|
signal wb_ext_io_in : wb_io_master_out;
|
|
signal wb_ext_io_out : wb_io_slave_out;
|
|
signal wb_ext_is_dram_csr : std_ulogic;
|
|
signal wb_ext_is_dram_init : std_ulogic;
|
|
signal wb_ext_is_eth : std_ulogic;
|
|
signal wb_ext_is_sdcard : std_ulogic;
|
|
|
|
-- DRAM main data wishbone connection
|
|
signal wb_dram_in : wishbone_master_out;
|
|
signal wb_dram_out : wishbone_slave_out;
|
|
|
|
-- DRAM control wishbone connection
|
|
signal wb_dram_ctrl_out : wb_io_slave_out := wb_io_slave_out_init;
|
|
|
|
-- LiteEth connection
|
|
signal ext_irq_eth : std_ulogic;
|
|
signal wb_eth_out : wb_io_slave_out := wb_io_slave_out_init;
|
|
|
|
-- LiteSDCard connection
|
|
signal ext_irq_sdcard : std_ulogic := '0';
|
|
signal wb_sdcard_out : wb_io_slave_out := wb_io_slave_out_init;
|
|
signal wb_sddma_out : wb_io_master_out := wb_io_master_out_init;
|
|
signal wb_sddma_in : wb_io_slave_out;
|
|
signal wb_sddma_nr : wb_io_master_out;
|
|
signal wb_sddma_ir : wb_io_slave_out;
|
|
-- for conversion from non-pipelined wishbone to pipelined
|
|
signal wb_sddma_stb_sent : std_ulogic;
|
|
|
|
-- Control/status
|
|
signal core_alt_reset : std_ulogic;
|
|
|
|
-- SPI flash
|
|
signal spi_sck : std_ulogic;
|
|
signal spi_cs_n : std_ulogic;
|
|
signal spi_sdat_o : std_ulogic_vector(3 downto 0);
|
|
signal spi_sdat_oe : std_ulogic_vector(3 downto 0);
|
|
signal spi_sdat_i : std_ulogic_vector(3 downto 0);
|
|
|
|
-- ddram clock signals as vectors
|
|
signal ddram_clk_p_vec : std_logic_vector(0 downto 0);
|
|
signal ddram_clk_n_vec : std_logic_vector(0 downto 0);
|
|
|
|
-- Fixup various memory sizes based on generics
|
|
function get_bram_size return natural is
|
|
begin
|
|
if USE_LITEDRAM and NO_BRAM then
|
|
return 0;
|
|
else
|
|
return MEMORY_SIZE;
|
|
end if;
|
|
end function;
|
|
|
|
function get_payload_size return natural is
|
|
begin
|
|
if USE_LITEDRAM and NO_BRAM then
|
|
return MEMORY_SIZE;
|
|
else
|
|
return 0;
|
|
end if;
|
|
end function;
|
|
|
|
constant BRAM_SIZE : natural := get_bram_size;
|
|
constant PAYLOAD_SIZE : natural := get_payload_size;
|
|
begin
|
|
|
|
-- Main SoC
|
|
soc0: entity work.soc
|
|
generic map(
|
|
MEMORY_SIZE => BRAM_SIZE,
|
|
RAM_INIT_FILE => RAM_INIT_FILE,
|
|
SIM => false,
|
|
CLK_FREQ => CLK_FREQUENCY,
|
|
HAS_FPU => HAS_FPU,
|
|
HAS_BTC => HAS_BTC,
|
|
HAS_DRAM => USE_LITEDRAM,
|
|
DRAM_SIZE => 512 * 1024 * 1024,
|
|
DRAM_INIT_SIZE => PAYLOAD_SIZE,
|
|
DISABLE_FLATTEN_CORE => DISABLE_FLATTEN_CORE,
|
|
HAS_SPI_FLASH => true,
|
|
SPI_FLASH_DLINES => 4,
|
|
SPI_FLASH_OFFSET => SPI_FLASH_OFFSET,
|
|
SPI_FLASH_DEF_CKDV => SPI_FLASH_DEF_CKDV,
|
|
SPI_FLASH_DEF_QUAD => SPI_FLASH_DEF_QUAD,
|
|
LOG_LENGTH => LOG_LENGTH,
|
|
UART0_IS_16550 => UART_IS_16550,
|
|
HAS_LITEETH => USE_LITEETH,
|
|
HAS_SD_CARD => USE_LITESDCARD
|
|
)
|
|
port map (
|
|
-- System signals
|
|
system_clk => system_clk,
|
|
rst => soc_rst,
|
|
|
|
-- UART signals
|
|
uart0_txd => uart_main_tx,
|
|
uart0_rxd => uart_main_rx,
|
|
|
|
-- SPI signals
|
|
spi_flash_sck => spi_sck,
|
|
spi_flash_cs_n => spi_cs_n,
|
|
spi_flash_sdat_o => spi_sdat_o,
|
|
spi_flash_sdat_oe => spi_sdat_oe,
|
|
spi_flash_sdat_i => spi_sdat_i,
|
|
|
|
-- External interrupts
|
|
ext_irq_eth => ext_irq_eth,
|
|
ext_irq_sdcard => ext_irq_sdcard,
|
|
|
|
-- IO wishbone
|
|
wb_dram_in => wb_dram_in,
|
|
wb_dram_out => wb_dram_out,
|
|
wb_ext_io_in => wb_ext_io_in,
|
|
wb_ext_io_out => wb_ext_io_out,
|
|
wb_ext_is_dram_csr => wb_ext_is_dram_csr,
|
|
wb_ext_is_dram_init => wb_ext_is_dram_init,
|
|
wb_ext_is_eth => wb_ext_is_eth,
|
|
wb_ext_is_sdcard => wb_ext_is_sdcard,
|
|
|
|
-- DMA wishbone
|
|
wishbone_dma_in => wb_sddma_in,
|
|
wishbone_dma_out => wb_sddma_out,
|
|
|
|
alt_reset => core_alt_reset
|
|
);
|
|
|
|
-- SPI Flash. The SPI clk needs to be fed through the STARTUPE2
|
|
-- primitive of the FPGA as it's not a normal pin
|
|
--
|
|
spi_flash_cs_n <= spi_cs_n;
|
|
spi_flash_mosi <= spi_sdat_o(0) when spi_sdat_oe(0) = '1' else 'Z';
|
|
spi_flash_miso <= spi_sdat_o(1) when spi_sdat_oe(1) = '1' else 'Z';
|
|
spi_flash_wp_n <= spi_sdat_o(2) when spi_sdat_oe(2) = '1' else 'Z';
|
|
spi_flash_hold_n <= spi_sdat_o(3) when spi_sdat_oe(3) = '1' else 'Z';
|
|
spi_sdat_i(0) <= spi_flash_mosi;
|
|
spi_sdat_i(1) <= spi_flash_miso;
|
|
spi_sdat_i(2) <= spi_flash_wp_n;
|
|
spi_sdat_i(3) <= spi_flash_hold_n;
|
|
|
|
STARTUPE2_INST: STARTUPE2
|
|
port map (
|
|
CLK => '0',
|
|
GSR => '0',
|
|
GTS => '0',
|
|
KEYCLEARB => '0',
|
|
PACK => '0',
|
|
USRCCLKO => spi_sck,
|
|
USRCCLKTS => '0',
|
|
USRDONEO => '1',
|
|
USRDONETS => '0'
|
|
);
|
|
|
|
nodram: if not USE_LITEDRAM generate
|
|
signal ddram_clk_dummy : std_ulogic;
|
|
begin
|
|
reset_controller: entity work.soc_reset
|
|
generic map(
|
|
RESET_LOW => RESET_LOW
|
|
)
|
|
port map(
|
|
ext_clk => ext_clk,
|
|
pll_clk => system_clk,
|
|
pll_locked_in => system_clk_locked,
|
|
ext_rst_in => ext_rst_n,
|
|
pll_rst_out => pll_rst,
|
|
rst_out => soc_rst
|
|
);
|
|
|
|
clkgen: entity work.clock_generator
|
|
generic map(
|
|
CLK_INPUT_HZ => 100000000,
|
|
CLK_OUTPUT_HZ => CLK_FREQUENCY
|
|
)
|
|
port map(
|
|
ext_clk => ext_clk,
|
|
pll_rst_in => pll_rst,
|
|
pll_clk_out => system_clk,
|
|
pll_locked_out => system_clk_locked
|
|
);
|
|
|
|
led0 <= '1';
|
|
led1 <= not soc_rst;
|
|
led2 <= '0';
|
|
core_alt_reset <= '0';
|
|
|
|
-- Vivado barfs on those differential signals if left
|
|
-- unconnected. So instanciate a diff. buffer and feed
|
|
-- it a constant '0'.
|
|
dummy_dram_clk: OBUFDS
|
|
port map (
|
|
O => ddram_clk_p,
|
|
OB => ddram_clk_n,
|
|
I => ddram_clk_dummy
|
|
);
|
|
ddram_clk_dummy <= '0';
|
|
|
|
end generate;
|
|
|
|
has_dram: if USE_LITEDRAM generate
|
|
signal dram_init_done : std_ulogic;
|
|
signal dram_init_error : std_ulogic;
|
|
signal dram_sys_rst : std_ulogic;
|
|
begin
|
|
|
|
-- Eventually dig out the frequency from the generator
|
|
-- but for now, assert it's 100Mhz
|
|
assert CLK_FREQUENCY = 100000000;
|
|
|
|
reset_controller: entity work.soc_reset
|
|
generic map(
|
|
RESET_LOW => RESET_LOW,
|
|
PLL_RESET_BITS => 18,
|
|
SOC_RESET_BITS => 1
|
|
)
|
|
port map(
|
|
ext_clk => ext_clk,
|
|
pll_clk => system_clk,
|
|
pll_locked_in => '1',
|
|
ext_rst_in => ext_rst_n,
|
|
pll_rst_out => pll_rst,
|
|
rst_out => open
|
|
);
|
|
|
|
-- Generate SoC reset
|
|
soc_rst_gen: process(system_clk)
|
|
begin
|
|
if ext_rst_n = '0' then
|
|
soc_rst <= '1';
|
|
elsif rising_edge(system_clk) then
|
|
soc_rst <= dram_sys_rst or not system_clk_locked;
|
|
end if;
|
|
end process;
|
|
|
|
ddram_clk_p_vec <= (others => ddram_clk_p);
|
|
ddram_clk_n_vec <= (others => ddram_clk_n);
|
|
|
|
dram: entity work.litedram_wrapper
|
|
generic map(
|
|
DRAM_ABITS => 25,
|
|
DRAM_ALINES => 15,
|
|
DRAM_DLINES => 16,
|
|
DRAM_CKLINES => 1,
|
|
DRAM_PORT_WIDTH => 128,
|
|
PAYLOAD_FILE => RAM_INIT_FILE,
|
|
PAYLOAD_SIZE => PAYLOAD_SIZE
|
|
)
|
|
port map(
|
|
clk_in => ext_clk,
|
|
rst => pll_rst,
|
|
system_clk => system_clk,
|
|
system_reset => dram_sys_rst,
|
|
core_alt_reset => core_alt_reset,
|
|
pll_locked => system_clk_locked,
|
|
|
|
wb_in => wb_dram_in,
|
|
wb_out => wb_dram_out,
|
|
wb_ctrl_in => wb_ext_io_in,
|
|
wb_ctrl_out => wb_dram_ctrl_out,
|
|
wb_ctrl_is_csr => wb_ext_is_dram_csr,
|
|
wb_ctrl_is_init => wb_ext_is_dram_init,
|
|
|
|
init_done => dram_init_done,
|
|
init_error => dram_init_error,
|
|
|
|
ddram_a => ddram_a,
|
|
ddram_ba => ddram_ba,
|
|
ddram_ras_n => ddram_ras_n,
|
|
ddram_cas_n => ddram_cas_n,
|
|
ddram_we_n => ddram_we_n,
|
|
ddram_cs_n => open,
|
|
ddram_dm => ddram_dm,
|
|
ddram_dq => ddram_dq,
|
|
ddram_dqs_p => ddram_dqs_p,
|
|
ddram_dqs_n => ddram_dqs_n,
|
|
ddram_clk_p => ddram_clk_p_vec,
|
|
ddram_clk_n => ddram_clk_n_vec,
|
|
ddram_cke => ddram_cke,
|
|
ddram_odt => ddram_odt,
|
|
ddram_reset_n => ddram_reset_n
|
|
);
|
|
|
|
led0 <= not dram_init_done;
|
|
led1 <= dram_init_error; -- Make it blink ?
|
|
led2 <= dram_init_done and not dram_init_error;
|
|
|
|
end generate;
|
|
|
|
has_liteeth : if USE_LITEETH generate
|
|
|
|
component liteeth_core port (
|
|
sys_clock : in std_ulogic;
|
|
sys_reset : in std_ulogic;
|
|
rgmii_eth_clocks_tx : out std_ulogic;
|
|
rgmii_eth_clocks_rx : in std_ulogic;
|
|
rgmii_eth_rst_n : out std_ulogic;
|
|
rgmii_eth_int_n : in std_ulogic;
|
|
rgmii_eth_mdio : inout std_ulogic;
|
|
rgmii_eth_mdc : out std_ulogic;
|
|
rgmii_eth_rx_ctl : in std_ulogic;
|
|
rgmii_eth_rx_data : in std_ulogic_vector(3 downto 0);
|
|
rgmii_eth_tx_ctl : out std_ulogic;
|
|
rgmii_eth_tx_data : out std_ulogic_vector(3 downto 0);
|
|
wishbone_adr : in std_ulogic_vector(29 downto 0);
|
|
wishbone_dat_w : in std_ulogic_vector(31 downto 0);
|
|
wishbone_dat_r : out std_ulogic_vector(31 downto 0);
|
|
wishbone_sel : in std_ulogic_vector(3 downto 0);
|
|
wishbone_cyc : in std_ulogic;
|
|
wishbone_stb : in std_ulogic;
|
|
wishbone_ack : out std_ulogic;
|
|
wishbone_we : in std_ulogic;
|
|
wishbone_cti : in std_ulogic_vector(2 downto 0);
|
|
wishbone_bte : in std_ulogic_vector(1 downto 0);
|
|
wishbone_err : out std_ulogic;
|
|
interrupt : out std_ulogic
|
|
);
|
|
end component;
|
|
|
|
signal wb_eth_cyc : std_ulogic;
|
|
signal wb_eth_adr : std_ulogic_vector(29 downto 0);
|
|
|
|
begin
|
|
liteeth : liteeth_core
|
|
port map(
|
|
sys_clock => system_clk,
|
|
sys_reset => soc_rst,
|
|
rgmii_eth_clocks_tx => eth_clocks_tx,
|
|
rgmii_eth_clocks_rx => eth_clocks_rx,
|
|
rgmii_eth_rst_n => eth_rst_n,
|
|
rgmii_eth_int_n => eth_int_n,
|
|
rgmii_eth_mdio => eth_mdio,
|
|
rgmii_eth_mdc => eth_mdc,
|
|
rgmii_eth_rx_ctl => eth_rx_ctl,
|
|
rgmii_eth_rx_data => eth_rx_data,
|
|
rgmii_eth_tx_ctl => eth_tx_ctl,
|
|
rgmii_eth_tx_data => eth_tx_data,
|
|
wishbone_adr => wb_eth_adr,
|
|
wishbone_dat_w => wb_ext_io_in.dat,
|
|
wishbone_dat_r => wb_eth_out.dat,
|
|
wishbone_sel => wb_ext_io_in.sel,
|
|
wishbone_cyc => wb_eth_cyc,
|
|
wishbone_stb => wb_ext_io_in.stb,
|
|
wishbone_ack => wb_eth_out.ack,
|
|
wishbone_we => wb_ext_io_in.we,
|
|
wishbone_cti => "000",
|
|
wishbone_bte => "00",
|
|
wishbone_err => open,
|
|
interrupt => ext_irq_eth
|
|
);
|
|
|
|
-- Gate cyc with "chip select" from soc
|
|
wb_eth_cyc <= wb_ext_io_in.cyc and wb_ext_is_eth;
|
|
|
|
-- Remove top address bits as liteeth decoder doesn't know about them
|
|
wb_eth_adr <= x"000" & "000" & wb_ext_io_in.adr(14 downto 0);
|
|
|
|
-- LiteETH isn't pipelined
|
|
wb_eth_out.stall <= not wb_eth_out.ack;
|
|
|
|
end generate;
|
|
|
|
no_liteeth : if not USE_LITEETH generate
|
|
ext_irq_eth <= '0';
|
|
end generate;
|
|
|
|
-- SD card
|
|
has_sdcard : if USE_LITESDCARD generate
|
|
component litesdcard_core port (
|
|
clk : in std_ulogic;
|
|
rst : in std_ulogic;
|
|
-- wishbone for accessing control registers
|
|
wb_ctrl_adr : in std_ulogic_vector(29 downto 0);
|
|
wb_ctrl_dat_w : in std_ulogic_vector(31 downto 0);
|
|
wb_ctrl_dat_r : out std_ulogic_vector(31 downto 0);
|
|
wb_ctrl_sel : in std_ulogic_vector(3 downto 0);
|
|
wb_ctrl_cyc : in std_ulogic;
|
|
wb_ctrl_stb : in std_ulogic;
|
|
wb_ctrl_ack : out std_ulogic;
|
|
wb_ctrl_we : in std_ulogic;
|
|
wb_ctrl_cti : in std_ulogic_vector(2 downto 0);
|
|
wb_ctrl_bte : in std_ulogic_vector(1 downto 0);
|
|
wb_ctrl_err : out std_ulogic;
|
|
-- wishbone for SD card core to use for DMA
|
|
wb_dma_adr : out std_ulogic_vector(29 downto 0);
|
|
wb_dma_dat_w : out std_ulogic_vector(31 downto 0);
|
|
wb_dma_dat_r : in std_ulogic_vector(31 downto 0);
|
|
wb_dma_sel : out std_ulogic_vector(3 downto 0);
|
|
wb_dma_cyc : out std_ulogic;
|
|
wb_dma_stb : out std_ulogic;
|
|
wb_dma_ack : in std_ulogic;
|
|
wb_dma_we : out std_ulogic;
|
|
wb_dma_cti : out std_ulogic_vector(2 downto 0);
|
|
wb_dma_bte : out std_ulogic_vector(1 downto 0);
|
|
wb_dma_err : in std_ulogic;
|
|
-- connections to SD card
|
|
sdcard_data : inout std_ulogic_vector(3 downto 0);
|
|
sdcard_cmd : inout std_ulogic;
|
|
sdcard_clk : out std_ulogic;
|
|
sdcard_cd : in std_ulogic;
|
|
irq : out std_ulogic
|
|
);
|
|
end component;
|
|
|
|
signal wb_sdcard_cyc : std_ulogic;
|
|
signal wb_sdcard_adr : std_ulogic_vector(29 downto 0);
|
|
|
|
begin
|
|
litesdcard : litesdcard_core
|
|
port map (
|
|
clk => system_clk,
|
|
rst => soc_rst,
|
|
wb_ctrl_adr => wb_sdcard_adr,
|
|
wb_ctrl_dat_w => wb_ext_io_in.dat,
|
|
wb_ctrl_dat_r => wb_sdcard_out.dat,
|
|
wb_ctrl_sel => wb_ext_io_in.sel,
|
|
wb_ctrl_cyc => wb_sdcard_cyc,
|
|
wb_ctrl_stb => wb_ext_io_in.stb,
|
|
wb_ctrl_ack => wb_sdcard_out.ack,
|
|
wb_ctrl_we => wb_ext_io_in.we,
|
|
wb_ctrl_cti => "000",
|
|
wb_ctrl_bte => "00",
|
|
wb_ctrl_err => open,
|
|
wb_dma_adr => wb_sddma_nr.adr,
|
|
wb_dma_dat_w => wb_sddma_nr.dat,
|
|
wb_dma_dat_r => wb_sddma_ir.dat,
|
|
wb_dma_sel => wb_sddma_nr.sel,
|
|
wb_dma_cyc => wb_sddma_nr.cyc,
|
|
wb_dma_stb => wb_sddma_nr.stb,
|
|
wb_dma_ack => wb_sddma_ir.ack,
|
|
wb_dma_we => wb_sddma_nr.we,
|
|
wb_dma_cti => open,
|
|
wb_dma_bte => open,
|
|
wb_dma_err => '0',
|
|
sdcard_data => sdcard_data,
|
|
sdcard_cmd => sdcard_cmd,
|
|
sdcard_clk => sdcard_clk,
|
|
sdcard_cd => sdcard_cd,
|
|
irq => ext_irq_sdcard
|
|
);
|
|
|
|
-- Gate cyc with chip select from SoC
|
|
wb_sdcard_cyc <= wb_ext_io_in.cyc and wb_ext_is_sdcard;
|
|
|
|
wb_sdcard_adr <= x"0000" & wb_ext_io_in.adr(13 downto 0);
|
|
|
|
wb_sdcard_out.stall <= not wb_sdcard_out.ack;
|
|
|
|
sdcard_reset <= '0';
|
|
|
|
-- Convert non-pipelined DMA wishbone to pipelined by suppressing
|
|
-- non-acknowledged strobes
|
|
process(system_clk)
|
|
begin
|
|
if rising_edge(system_clk) then
|
|
wb_sddma_out <= wb_sddma_nr;
|
|
if wb_sddma_stb_sent = '1' or
|
|
(wb_sddma_out.stb = '1' and wb_sddma_in.stall = '0') then
|
|
wb_sddma_out.stb <= '0';
|
|
end if;
|
|
if wb_sddma_nr.cyc = '0' or wb_sddma_ir.ack = '1' then
|
|
wb_sddma_stb_sent <= '0';
|
|
elsif wb_sddma_in.stall = '0' then
|
|
wb_sddma_stb_sent <= wb_sddma_nr.stb;
|
|
end if;
|
|
wb_sddma_ir <= wb_sddma_in;
|
|
end if;
|
|
end process;
|
|
|
|
end generate;
|
|
|
|
no_sdcard : if not USE_LITESDCARD generate
|
|
sdcard_reset <= '1';
|
|
end generate;
|
|
|
|
-- Mux WB response on the IO bus
|
|
wb_ext_io_out <= wb_eth_out when wb_ext_is_eth = '1' else
|
|
wb_sdcard_out when wb_ext_is_sdcard = '1' else
|
|
wb_dram_ctrl_out;
|
|
|
|
led4 <= system_clk_locked;
|
|
led5 <= '1';
|
|
led6 <= not soc_rst;
|
|
led7 <= '0';
|
|
|
|
end architecture behaviour;
|