You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
microwatt/register_file.vhdl

218 lines
7.1 KiB
VHDL

library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
library work;
use work.common.all;
entity register_file is
generic (
SIM : boolean := false;
HAS_FPU : boolean := true;
-- Non-zero to enable log data collection
LOG_LENGTH : natural := 0
);
port(
clk : in std_logic;
stall : in std_ulogic;
d1_in : in Decode1ToRegisterFileType;
d_in : in Decode2ToRegisterFileType;
d_out : out RegisterFileToDecode2Type;
w_in : in WritebackToRegisterFileType;
dbg_gpr_req : in std_ulogic;
dbg_gpr_ack : out std_ulogic;
dbg_gpr_addr : in gspr_index_t;
dbg_gpr_data : out std_ulogic_vector(63 downto 0);
-- debug
sim_dump : in std_ulogic;
sim_dump_done : out std_ulogic;
log_out : out std_ulogic_vector(71 downto 0)
);
end entity register_file;
architecture behaviour of register_file is
type regfile is array(0 to 63) of std_ulogic_vector(63 downto 0);
signal registers : regfile := (others => (others => '0'));
signal dbg_data : std_ulogic_vector(63 downto 0);
signal dbg_ack : std_ulogic;
signal dbg_gpr_done : std_ulogic;
signal addr_1_reg : gspr_index_t;
signal addr_2_reg : gspr_index_t;
signal addr_3_reg : gspr_index_t;
signal rd_2 : std_ulogic;
signal fwd_1 : std_ulogic;
signal fwd_2 : std_ulogic;
signal fwd_3 : std_ulogic;
signal data_1 : std_ulogic_vector(63 downto 0);
signal data_2 : std_ulogic_vector(63 downto 0);
signal data_3 : std_ulogic_vector(63 downto 0);
signal prev_write_data : std_ulogic_vector(63 downto 0);
begin
-- synchronous reads and writes
register_write_0: process(clk)
variable a_addr, b_addr, c_addr : gspr_index_t;
variable w_addr : gspr_index_t;
variable b_enable : std_ulogic;
begin
if rising_edge(clk) then
if w_in.write_enable = '1' then
w_addr := w_in.write_reg;
if HAS_FPU and w_addr(5) = '1' then
report "Writing FPR " & to_hstring(w_addr(4 downto 0)) & " " & to_hstring(w_in.write_data);
else
w_addr(5) := '0';
report "Writing GPR " & to_hstring(w_addr) & " " & to_hstring(w_in.write_data);
end if;
assert not(is_x(w_in.write_data)) and not(is_x(w_in.write_reg)) severity failure;
registers(to_integer(unsigned(w_addr))) <= w_in.write_data;
end if;
a_addr := d1_in.reg_1_addr;
b_addr := d1_in.reg_2_addr;
c_addr := d1_in.reg_3_addr;
b_enable := d1_in.read_2_enable;
if stall = '1' then
a_addr := addr_1_reg;
b_addr := addr_2_reg;
c_addr := addr_3_reg;
b_enable := rd_2;
else
addr_1_reg <= a_addr;
addr_2_reg <= b_addr;
addr_3_reg <= c_addr;
rd_2 <= b_enable;
end if;
fwd_1 <= '0';
fwd_2 <= '0';
fwd_3 <= '0';
if w_in.write_enable = '1' then
if w_addr = a_addr then
fwd_1 <= '1';
end if;
if w_addr = b_addr then
fwd_2 <= '1';
end if;
if w_addr = c_addr then
fwd_3 <= '1';
end if;
end if;
-- Do debug reads to GPRs and FPRs using the B port when it is not in use
if dbg_gpr_req = '1' then
if b_enable = '0' then
b_addr := dbg_gpr_addr(5 downto 0);
dbg_gpr_done <= '1';
end if;
else
dbg_gpr_done <= '0';
end if;
if not HAS_FPU then
-- Make it obvious that we only want 32 GSPRs for a no-FPU implementation
a_addr(5) := '0';
b_addr(5) := '0';
c_addr(5) := '0';
end if;
data_1 <= registers(to_integer(unsigned(a_addr)));
data_2 <= registers(to_integer(unsigned(b_addr)));
data_3 <= registers(to_integer(unsigned(c_addr)));
prev_write_data <= w_in.write_data;
end if;
end process register_write_0;
-- asynchronous forwarding of write data
register_read_0: process(all)
variable out_data_1 : std_ulogic_vector(63 downto 0);
variable out_data_2 : std_ulogic_vector(63 downto 0);
variable out_data_3 : std_ulogic_vector(63 downto 0);
begin
out_data_1 := data_1;
out_data_2 := data_2;
out_data_3 := data_3;
if fwd_1 = '1' then
out_data_1 := prev_write_data;
end if;
if fwd_2 = '1' then
out_data_2 := prev_write_data;
end if;
if fwd_3 = '1' then
out_data_3 := prev_write_data;
end if;
if d_in.read1_enable = '1' then
report "Reading GPR " & to_hstring(addr_1_reg) & " " & to_hstring(out_data_1);
end if;
if d_in.read2_enable = '1' then
report "Reading GPR " & to_hstring(addr_2_reg) & " " & to_hstring(out_data_2);
end if;
if d_in.read3_enable = '1' then
report "Reading GPR " & to_hstring(addr_3_reg) & " " & to_hstring(out_data_3);
end if;
d_out.read1_data <= out_data_1;
d_out.read2_data <= out_data_2;
d_out.read3_data <= out_data_3;
end process register_read_0;
-- Latch read data and ack if dbg read requested and B port not busy
dbg_register_read: process(clk)
begin
if rising_edge(clk) then
if dbg_gpr_req = '1' then
if dbg_ack = '0' and dbg_gpr_done = '1' then
dbg_data <= data_2;
dbg_ack <= '1';
end if;
else
dbg_ack <= '0';
end if;
end if;
end process;
dbg_gpr_ack <= dbg_ack;
dbg_gpr_data <= dbg_data;
-- Dump registers if core terminates
sim_dump_test: if SIM generate
dump_registers: process(all)
begin
if sim_dump = '1' then
loop_0: for i in 0 to 31 loop
report "GPR" & integer'image(i) & " " & to_hstring(registers(i));
end loop loop_0;
sim_dump_done <= '1';
else
sim_dump_done <= '0';
end if;
end process;
end generate;
-- Keep GHDL synthesis happy
sim_dump_test_synth: if not SIM generate
sim_dump_done <= '0';
end generate;
rf_log: if LOG_LENGTH > 0 generate
signal log_data : std_ulogic_vector(71 downto 0);
begin
reg_log: process(clk)
begin
if rising_edge(clk) then
log_data <= w_in.write_data &
w_in.write_enable &
'0' & w_in.write_reg;
end if;
end process;
log_out <= log_data;
end generate;
end architecture behaviour;