You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Paul Mackerras
21ed730514
This adds litesdcard.v generated from the litex/litesdcard project, along with logic in top-arty.vhdl to connect it into the system. There is now a DMA wishbone coming in to soc.vhdl which is narrower than the other wishbone masters (it has 32-bit data rather than 64-bit) so there is a widening/narrowing adapter between it and the main wishbone master arbiter. Also, litesdcard generates a non-pipelined wishbone for its DMA connection, which needs to be converted to a pipelined wishbone. We have a latch on both the incoming and outgoing sides of the wishbone in order to help make timing (at the cost of two extra cycles of latency). litesdcard generates an interrupt signal which is wired up to input 3 of the ICS (IRQ 19). Signed-off-by: Paul Mackerras <paulus@ozlabs.org> |
4 years ago | |
---|---|---|
.. | ||
LICENSE | 5 years ago | |
acorn-cle-215.xdc | 4 years ago | |
arty_a7.xdc | 4 years ago | |
clk_gen_bypass.vhd | 5 years ago | |
clk_gen_ecp5.vhd | 4 years ago | |
clk_gen_mcmm.vhd | 5 years ago | |
clk_gen_plle2.vhd | 4 years ago | |
cmod_a7-35.xdc | 5 years ago | |
firmware.hex | 5 years ago | |
fpga-random.vhdl | 4 years ago | |
fpga-random.xdc | 4 years ago | |
genesys2.xdc | 4 years ago | |
hello_world.hex | 5 years ago | |
main_bram.vhdl | 5 years ago | |
nexys-video.xdc | 5 years ago | |
nexys_a7.xdc | 5 years ago | |
pp_fifo.vhd | 5 years ago | |
pp_soc_uart.vhd | 5 years ago | |
pp_utilities.vhd | 5 years ago | |
soc_reset.vhdl | 5 years ago | |
soc_reset_tb.vhdl | 5 years ago | |
top-acorn-cle-215.vhdl | 4 years ago | |
top-arty.vhdl | 4 years ago | |
top-generic.vhdl | 4 years ago | |
top-genesys2.vhdl | 4 years ago | |
top-nexys-video.vhdl | 4 years ago |