You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
microwatt/execute1.vhdl

372 lines
10 KiB
VHDL

library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
library work;
use work.decode_types.all;
use work.common.all;
use work.helpers.all;
use work.crhelpers.all;
use work.insn_helpers.all;
use work.ppc_fx_insns.all;
entity execute1 is
generic (
SIM : boolean := false
);
port (
clk : in std_logic;
-- asynchronous
flush_out : out std_ulogic;
e_in : in Decode2ToExecute1Type;
-- asynchronous
f_out : out Execute1ToFetch1Type;
e_out : out Execute1ToWritebackType;
terminate_out : out std_ulogic
);
end entity execute1;
architecture behaviour of execute1 is
type reg_type is record
--f : Execute1ToFetch1Type;
e : Execute1ToWritebackType;
end record;
signal r, rin : reg_type;
signal ctrl: ctrl_t := (carry => '0', others => (others => '0'));
signal ctrl_tmp: ctrl_t := (carry => '0', others => (others => '0'));
signal right_shift, rot_clear_left, rot_clear_right: std_ulogic;
signal rotator_result: std_ulogic_vector(63 downto 0);
signal rotator_carry: std_ulogic;
signal logical_result: std_ulogic_vector(63 downto 0);
signal countzero_result: std_ulogic_vector(63 downto 0);
function decode_input_carry (carry_sel : carry_in_t; ca_in : std_ulogic) return std_ulogic is
begin
case carry_sel is
when ZERO =>
return '0';
when CA =>
return ca_in;
when ONE =>
return '1';
end case;
end;
begin
rotator_0: entity work.rotator
port map (
rs => e_in.read_data3,
ra => e_in.read_data1,
shift => e_in.read_data2(6 downto 0),
insn => e_in.insn,
is_32bit => e_in.is_32bit,
right_shift => right_shift,
arith => e_in.is_signed,
clear_left => rot_clear_left,
clear_right => rot_clear_right,
result => rotator_result,
carry_out => rotator_carry
);
logical_0: entity work.logical
port map (
rs => e_in.read_data3,
rb => e_in.read_data2,
op => e_in.insn_type,
invert_in => e_in.invert_a,
invert_out => e_in.invert_out,
result => logical_result
);
countzero_0: entity work.zero_counter
port map (
rs => e_in.read_data3,
count_right => e_in.insn(10),
is_32bit => e_in.is_32bit,
result => countzero_result
);
execute1_0: process(clk)
begin
if rising_edge(clk) then
r <= rin;
ctrl <= ctrl_tmp;
end if;
end process;
execute1_1: process(all)
variable v : reg_type;
variable a_inv : std_ulogic_vector(63 downto 0);
variable result : std_ulogic_vector(63 downto 0);
variable newcrf : std_ulogic_vector(3 downto 0);
variable result_with_carry : std_ulogic_vector(64 downto 0);
variable result_en : std_ulogic;
variable crnum : crnum_t;
variable crbit : integer range 0 to 31;
variable scrnum : crnum_t;
variable lo, hi : integer;
variable sh, mb, me : std_ulogic_vector(5 downto 0);
variable sh32, mb32, me32 : std_ulogic_vector(4 downto 0);
variable bo, bi : std_ulogic_vector(4 downto 0);
variable bf, bfa : std_ulogic_vector(2 downto 0);
variable l : std_ulogic;
begin
result := (others => '0');
result_with_carry := (others => '0');
result_en := '0';
newcrf := (others => '0');
v := r;
v.e := Execute1ToWritebackInit;
--v.f := Execute1ToFetch1TypeInit;
ctrl_tmp <= ctrl;
-- FIXME: run at 512MHz not core freq
ctrl_tmp.tb <= std_ulogic_vector(unsigned(ctrl.tb) + 1);
terminate_out <= '0';
f_out <= Execute1ToFetch1TypeInit;
-- rotator control signals
right_shift <= '1' when e_in.insn_type = OP_SHR else '0';
rot_clear_left <= '1' when e_in.insn_type = OP_RLC or e_in.insn_type = OP_RLCL else '0';
rot_clear_right <= '1' when e_in.insn_type = OP_RLC or e_in.insn_type = OP_RLCR else '0';
if e_in.valid = '1' then
v.e.valid := '1';
v.e.write_reg := e_in.write_reg;
v.e.write_len := x"8";
v.e.sign_extend := '0';
case_0: case e_in.insn_type is
when OP_ILLEGAL =>
terminate_out <= '1';
report "illegal";
when OP_NOP =>
-- Do nothing
when OP_ADD =>
if e_in.invert_a = '0' then
a_inv := e_in.read_data1;
else
a_inv := not e_in.read_data1;
end if;
result_with_carry := ppc_adde(a_inv, e_in.read_data2, decode_input_carry(e_in.input_carry, ctrl.carry));
result := result_with_carry(63 downto 0);
if e_in.output_carry then
ctrl_tmp.carry <= result_with_carry(64);
end if;
result_en := '1';
when OP_AND | OP_OR | OP_XOR =>
result := logical_result;
result_en := '1';
when OP_B =>
f_out.redirect <= '1';
if (insn_aa(e_in.insn)) then
f_out.redirect_nia <= std_ulogic_vector(signed(e_in.read_data2));
else
f_out.redirect_nia <= std_ulogic_vector(signed(e_in.nia) + signed(e_in.read_data2));
end if;
when OP_BC =>
bo := insn_bo(e_in.insn);
bi := insn_bi(e_in.insn);
if bo(4-2) = '0' then
ctrl_tmp.ctr <= std_ulogic_vector(unsigned(ctrl.ctr) - 1);
end if;
if ppc_bc_taken(bo, bi, e_in.cr, ctrl.ctr) = 1 then
f_out.redirect <= '1';
if (insn_aa(e_in.insn)) then
f_out.redirect_nia <= std_ulogic_vector(signed(e_in.read_data2));
else
f_out.redirect_nia <= std_ulogic_vector(signed(e_in.nia) + signed(e_in.read_data2));
end if;
end if;
when OP_BCREG =>
-- bits 10 and 6 distinguish between bclr, bcctr and bctar
bo := insn_bo(e_in.insn);
bi := insn_bi(e_in.insn);
if bo(4-2) = '0' and e_in.insn(10) = '0' then
ctrl_tmp.ctr <= std_ulogic_vector(unsigned(ctrl.ctr) - 1);
end if;
if ppc_bc_taken(bo, bi, e_in.cr, ctrl.ctr) = 1 then
f_out.redirect <= '1';
if e_in.insn(10) = '0' then
f_out.redirect_nia <= ctrl.lr(63 downto 2) & "00";
else
f_out.redirect_nia <= ctrl.ctr(63 downto 2) & "00";
end if;
end if;
when OP_CMPB =>
result := ppc_cmpb(e_in.read_data3, e_in.read_data2);
result_en := '1';
when OP_CMP =>
bf := insn_bf(e_in.insn);
l := insn_l(e_in.insn);
v.e.write_cr_enable := '1';
crnum := to_integer(unsigned(bf));
v.e.write_cr_mask := num_to_fxm(crnum);
for i in 0 to 7 loop
lo := i*4;
hi := lo + 3;
v.e.write_cr_data(hi downto lo) := ppc_cmp(l, e_in.read_data1, e_in.read_data2);
end loop;
when OP_CMPL =>
bf := insn_bf(e_in.insn);
l := insn_l(e_in.insn);
v.e.write_cr_enable := '1';
crnum := to_integer(unsigned(bf));
v.e.write_cr_mask := num_to_fxm(crnum);
for i in 0 to 7 loop
lo := i*4;
hi := lo + 3;
v.e.write_cr_data(hi downto lo) := ppc_cmpl(l, e_in.read_data1, e_in.read_data2);
end loop;
when OP_CNTZ =>
result := countzero_result;
result_en := '1';
when OP_EXTS =>
v.e.write_len := e_in.data_len;
v.e.sign_extend := '1';
result := e_in.read_data3;
result_en := '1';
when OP_ISEL =>
crbit := to_integer(unsigned(insn_bc(e_in.insn)));
if e_in.cr(31-crbit) = '1' then
result := e_in.read_data1;
else
result := e_in.read_data2;
end if;
result_en := '1';
when OP_MCRF =>
bf := insn_bf(e_in.insn);
bfa := insn_bfa(e_in.insn);
v.e.write_cr_enable := '1';
crnum := to_integer(unsigned(bf));
scrnum := to_integer(unsigned(bfa));
v.e.write_cr_mask := num_to_fxm(crnum);
for i in 0 to 7 loop
lo := (7-i)*4;
hi := lo + 3;
if i = scrnum then
newcrf := e_in.cr(hi downto lo);
end if;
end loop;
for i in 0 to 7 loop
lo := i*4;
hi := lo + 3;
v.e.write_cr_data(hi downto lo) := newcrf;
end loop;
when OP_MFSPR =>
if std_match(e_in.insn(20 downto 11), "0100100000") then
result := ctrl.ctr;
result_en := '1';
elsif std_match(e_in.insn(20 downto 11), "0100000000") then
result := ctrl.lr;
result_en := '1';
elsif std_match(e_in.insn(20 downto 11), "0110001000") then
result := ctrl.tb;
result_en := '1';
end if;
when OP_MFCR =>
if e_in.insn(20) = '0' then
-- mfcr
result := x"00000000" & e_in.cr;
else
-- mfocrf
crnum := fxm_to_num(insn_fxm(e_in.insn));
result := (others => '0');
for i in 0 to 7 loop
lo := (7-i)*4;
hi := lo + 3;
if crnum = i then
result(hi downto lo) := e_in.cr(hi downto lo);
end if;
end loop;
end if;
result_en := '1';
when OP_MTCRF =>
v.e.write_cr_enable := '1';
if e_in.insn(20) = '0' then
-- mtcrf
v.e.write_cr_mask := insn_fxm(e_in.insn);
else
-- mtocrf: We require one hot priority encoding here
crnum := fxm_to_num(insn_fxm(e_in.insn));
v.e.write_cr_mask := num_to_fxm(crnum);
end if;
v.e.write_cr_data := e_in.read_data3(31 downto 0);
when OP_MTSPR =>
if std_match(e_in.insn(20 downto 11), "0100100000") then
ctrl_tmp.ctr <= e_in.read_data3;
elsif std_match(e_in.insn(20 downto 11), "0100000000") then
ctrl_tmp.lr <= e_in.read_data3;
end if;
when OP_POPCNTB =>
result := ppc_popcntb(e_in.read_data3);
result_en := '1';
when OP_POPCNTW =>
result := ppc_popcntw(e_in.read_data3);
result_en := '1';
when OP_POPCNTD =>
result := ppc_popcntd(e_in.read_data3);
result_en := '1';
when OP_PRTYD =>
result := ppc_prtyd(e_in.read_data3);
result_en := '1';
when OP_PRTYW =>
result := ppc_prtyw(e_in.read_data3);
result_en := '1';
when OP_RLC | OP_RLCL | OP_RLCR | OP_SHL | OP_SHR =>
result := rotator_result;
if e_in.output_carry = '1' then
ctrl_tmp.carry <= rotator_carry;
end if;
result_en := '1';
when OP_SIM_CONFIG =>
-- bit 0 was used to select the microwatt console, which
-- we no longer support.
if SIM = true then
result := x"0000000000000000";
else
result := x"0000000000000000";
end if;
result_en := '1';
when OP_TDI =>
-- Keep our test cases happy for now, ignore trap instructions
report "OP_TDI FIXME";
when others =>
terminate_out <= '1';
report "illegal";
end case;
if e_in.lr = '1' then
ctrl_tmp.lr <= std_ulogic_vector(unsigned(e_in.nia) + 4);
end if;
end if;
v.e.write_data := result;
v.e.write_enable := result_en;
v.e.rc := e_in.rc;
-- Update registers
rin <= v;
-- update outputs
--f_out <= r.f;
e_out <= r.e;
flush_out <= f_out.redirect;
end process;
end architecture behaviour;