matthew1kalasky3
/
microwatt
forked from cores/microwatt
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
master
fpu-init
loadstore-init
core_debug-init
icache-unused-sig
icache-insn-u-state
dcache-unused-sig
unused-sig
divider-init
loadstore-pmu-init
icache-pmu-events
fpu-typo
less-fpga-init
caravel-mpw6-20220530
caravel-mpw5-20220323
caravel-mpw5-20220322
alt-reset-address
log2ceil-issue
fpu-constant
asic-3
boxarty-20211011
icbi-issue
orange-crab-freq
dcache-nc-fix
remove-potato-uart
cache-tlb-parameters-2
caravel-20210114
caravel-20210105
jtag-port-2
jtag-port
nia-debug
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from 'eb7eba2d92'
${ noResults }
microwatt/uart16550/uart_regs.v

889 lines
28 KiB
Coq
Raw Normal View History Unescape Escape

Add uart16550 files from fusesoc These are needed for synthesis that doesn't use fusesoc natively. These were pulled in via 'fusesoc fetch ::uart16550:1.5.5-r1' Signed-off-by: Michael Neuling <mikey@neuling.org>
4 years ago
//////////////////////////////////////////////////////////////////////
//// ////
//// uart_regs.v ////
//// ////
//// ////
//// This file is part of the "UART 16550 compatible" project ////
//// http://www.opencores.org/cores/uart16550/ ////
//// ////
//// Documentation related to this project: ////
//// - http://www.opencores.org/cores/uart16550/ ////
//// ////
//// Projects compatibility: ////
//// - WISHBONE ////
//// RS232 Protocol ////
//// 16550D uart (mostly supported) ////
//// ////
//// Overview (main Features): ////
//// Registers of the uart 16550 core ////
//// ////
//// Known problems (limits): ////
//// Inserts 1 wait state in all WISHBONE transfers ////
//// ////
//// To Do: ////
//// Nothing or verification. ////
//// ////
//// Author(s): ////
//// - gorban@opencores.org ////
//// - Jacob Gorban ////
//// - Igor Mohor (igorm@opencores.org) ////
//// ////
//// Created: 2001/05/12 ////
//// Last Updated: (See log for the revision history ////
//// ////
//// ////
//////////////////////////////////////////////////////////////////////
//// ////
//// Copyright (C) 2000, 2001 Authors ////
//// ////
//// This source file may be used and distributed without ////
//// restriction provided that this copyright statement is not ////
//// removed from the file and that any derivative work contains ////
//// the original copyright notice and the associated disclaimer. ////
//// ////
//// This source file is free software; you can redistribute it ////
//// and/or modify it under the terms of the GNU Lesser General ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any ////
//// later version. ////
//// ////
//// This source is distributed in the hope that it will be ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
//// PURPOSE. See the GNU Lesser General Public License for more ////
//// details. ////
//// ////
//// You should have received a copy of the GNU Lesser General ////
//// Public License along with this source; if not, download it ////
//// from http://www.opencores.org/lgpl.shtml ////
//// ////
//////////////////////////////////////////////////////////////////////
//
// CVS Revision History
//
// $Log: not supported by cvs2svn $
// Revision 1.41 2004/05/21 11:44:41 tadejm
// Added synchronizer flops for RX input.
//
// Revision 1.40 2003/06/11 16:37:47 gorban
// This fixes errors in some cases when data is being read and put to the FIFO at the same time. Patch is submitted by Scott Furman. Update is very recommended.
//
// Revision 1.39 2002/07/29 21:16:18 gorban
// The uart_defines.v file is included again in sources.
//
// Revision 1.38 2002/07/22 23:02:23 gorban
// Bug Fixes:
// * Possible loss of sync and bad reception of stop bit on slow baud rates fixed.
// Problem reported by Kenny.Tung.
// * Bad (or lack of ) loopback handling fixed. Reported by Cherry Withers.
//
// Improvements:
// * Made FIFO's as general inferrable memory where possible.
// So on FPGA they should be inferred as RAM (Distributed RAM on Xilinx).
// This saves about 1/3 of the Slice count and reduces P&R and synthesis times.
//
// * Added optional baudrate output (baud_o).
// This is identical to BAUDOUT* signal on 16550 chip.
// It outputs 16xbit_clock_rate - the divided clock.
// It's disabled by default. Define UART_HAS_BAUDRATE_OUTPUT to use.
//
// Revision 1.37 2001/12/27 13:24:09 mohor
// lsr[7] was not showing overrun errors.
//
// Revision 1.36 2001/12/20 13:25:46 mohor
// rx push changed to be only one cycle wide.
//
// Revision 1.35 2001/12/19 08:03:34 mohor
// Warnings cleared.
//
// Revision 1.34 2001/12/19 07:33:54 mohor
// Synplicity was having troubles with the comment.
//
// Revision 1.33 2001/12/17 10:14:43 mohor
// Things related to msr register changed. After THRE IRQ occurs, and one
// character is written to the transmit fifo, the detection of the THRE bit in the
// LSR is delayed for one character time.
//
// Revision 1.32 2001/12/14 13:19:24 mohor
// MSR register fixed.
//
// Revision 1.31 2001/12/14 10:06:58 mohor
// After reset modem status register MSR should be reset.
//
// Revision 1.30 2001/12/13 10:09:13 mohor
// thre irq should be cleared only when being source of interrupt.
//
// Revision 1.29 2001/12/12 09:05:46 mohor
// LSR status bit 0 was not cleared correctly in case of reseting the FCR (rx fifo).
//
// Revision 1.28 2001/12/10 19:52:41 gorban
// Scratch register added
//
// Revision 1.27 2001/12/06 14:51:04 gorban
// Bug in LSR[0] is fixed.
// All WISHBONE signals are now sampled, so another wait-state is introduced on all transfers.
//
// Revision 1.26 2001/12/03 21:44:29 gorban
// Updated specification documentation.
// Added full 32-bit data bus interface, now as default.
// Address is 5-bit wide in 32-bit data bus mode.
// Added wb_sel_i input to the core. It's used in the 32-bit mode.
// Added debug interface with two 32-bit read-only registers in 32-bit mode.
// Bits 5 and 6 of LSR are now only cleared on TX FIFO write.
// My small test bench is modified to work with 32-bit mode.
//
// Revision 1.25 2001/11/28 19:36:39 gorban
// Fixed: timeout and break didn't pay attention to current data format when counting time
//
// Revision 1.24 2001/11/26 21:38:54 gorban
// Lots of fixes:
// Break condition wasn't handled correctly at all.
// LSR bits could lose their values.
// LSR value after reset was wrong.
// Timing of THRE interrupt signal corrected.
// LSR bit 0 timing corrected.
//
// Revision 1.23 2001/11/12 21:57:29 gorban
// fixed more typo bugs
//
// Revision 1.22 2001/11/12 15:02:28 mohor
// lsr1r error fixed.
//
// Revision 1.21 2001/11/12 14:57:27 mohor
// ti_int_pnd error fixed.
//
// Revision 1.20 2001/11/12 14:50:27 mohor
// ti_int_d error fixed.
//
// Revision 1.19 2001/11/10 12:43:21 gorban
// Logic Synthesis bugs fixed. Some other minor changes
//
// Revision 1.18 2001/11/08 14:54:23 mohor
// Comments in Slovene language deleted, few small fixes for better work of
// old tools. IRQs need to be fix.
//
// Revision 1.17 2001/11/07 17:51:52 gorban
// Heavily rewritten interrupt and LSR subsystems.
// Many bugs hopefully squashed.
//
// Revision 1.16 2001/11/02 09:55:16 mohor
// no message
//
// Revision 1.15 2001/10/31 15:19:22 gorban
// Fixes to break and timeout conditions
//
// Revision 1.14 2001/10/29 17:00:46 gorban
// fixed parity sending and tx_fifo resets over- and underrun
//
// Revision 1.13 2001/10/20 09:58:40 gorban
// Small synopsis fixes
//
// Revision 1.12 2001/10/19 16:21:40 gorban
// Changes data_out to be synchronous again as it should have been.
//
// Revision 1.11 2001/10/18 20:35:45 gorban
// small fix
//
// Revision 1.10 2001/08/24 21:01:12 mohor
// Things connected to parity changed.
// Clock devider changed.
//
// Revision 1.9 2001/08/23 16:05:05 mohor
// Stop bit bug fixed.
// Parity bug fixed.
// WISHBONE read cycle bug fixed,
// OE indicator (Overrun Error) bug fixed.
// PE indicator (Parity Error) bug fixed.
// Register read bug fixed.
//
// Revision 1.10 2001/06/23 11:21:48 gorban
// DL made 16-bit long. Fixed transmission/reception bugs.
//
// Revision 1.9 2001/05/31 20:08:01 gorban
// FIFO changes and other corrections.
//
// Revision 1.8 2001/05/29 20:05:04 gorban
// Fixed some bugs and synthesis problems.
//
// Revision 1.7 2001/05/27 17:37:49 gorban
// Fixed many bugs. Updated spec. Changed FIFO files structure. See CHANGES.txt file.
//
// Revision 1.6 2001/05/21 19:12:02 gorban
// Corrected some Linter messages.
//
// Revision 1.5 2001/05/17 18:34:18 gorban
// First 'stable' release. Should be sythesizable now. Also added new header.
//
// Revision 1.0 2001-05-17 21:27:11+02 jacob
// Initial revision
//
//
`include "uart_defines.v"
`define UART_DL1 7:0
`define UART_DL2 15:8
module uart_regs
#(parameter SIM = 0)
(clk,
wb_rst_i, wb_addr_i, wb_dat_i, wb_dat_o, wb_we_i, wb_re_i,
// additional signals
modem_inputs,
stx_pad_o, srx_pad_i,
rts_pad_o, dtr_pad_o, int_o
`ifdef UART_HAS_BAUDRATE_OUTPUT
, baud_o
`endif
);
input clk;
input wb_rst_i;
input [2:0] wb_addr_i;
input [7:0] wb_dat_i;
output [7:0] wb_dat_o;
input wb_we_i;
input wb_re_i;
output stx_pad_o;
input srx_pad_i;
input [3:0] modem_inputs;
output rts_pad_o;
output dtr_pad_o;
output int_o;
`ifdef UART_HAS_BAUDRATE_OUTPUT
output baud_o;
`endif
wire [3:0] modem_inputs;
reg enable;
`ifdef UART_HAS_BAUDRATE_OUTPUT
assign baud_o = enable; // baud_o is actually the enable signal
`endif
wire stx_pad_o; // received from transmitter module
wire srx_pad_i;
wire srx_pad;
reg [7:0] wb_dat_o;
wire [2:0] wb_addr_i;
wire [7:0] wb_dat_i;
reg [3:0] ier;
reg [3:0] iir;
reg [1:0] fcr; /// bits 7 and 6 of fcr. Other bits are ignored
reg [4:0] mcr;
reg [7:0] lcr;
reg [7:0] msr;
reg [15:0] dl; // 32-bit divisor latch
reg [7:0] scratch; // UART scratch register
reg start_dlc; // activate dlc on writing to UART_DL1
reg lsr_mask_d; // delay for lsr_mask condition
reg msi_reset; // reset MSR 4 lower bits indicator
//reg threi_clear; // THRE interrupt clear flag
reg [15:0] dlc; // 32-bit divisor latch counter
reg int_o;
reg [3:0] trigger_level; // trigger level of the receiver FIFO
reg rx_reset;
reg tx_reset;
wire dlab; // divisor latch access bit
wire cts_pad_i, dsr_pad_i, ri_pad_i, dcd_pad_i; // modem status bits
wire loopback; // loopback bit (MCR bit 4)
wire cts, dsr, ri, dcd; // effective signals
wire cts_c, dsr_c, ri_c, dcd_c; // Complement effective signals (considering loopback)
wire rts_pad_o, dtr_pad_o; // modem control outputs
// LSR bits wires and regs
wire [7:0] lsr;
wire lsr0, lsr1, lsr2, lsr3, lsr4, lsr5, lsr6, lsr7;
reg lsr0r, lsr1r, lsr2r, lsr3r, lsr4r, lsr5r, lsr6r, lsr7r;
wire lsr_mask; // lsr_mask
//
// ASSINGS
//
assign lsr[7:0] = { lsr7r, lsr6r, lsr5r, lsr4r, lsr3r, lsr2r, lsr1r, lsr0r };
assign {cts_pad_i, dsr_pad_i, ri_pad_i, dcd_pad_i} = modem_inputs;
assign {cts, dsr, ri, dcd} = ~{cts_pad_i,dsr_pad_i,ri_pad_i,dcd_pad_i};
assign {cts_c, dsr_c, ri_c, dcd_c} = loopback ? {mcr[`UART_MC_RTS],mcr[`UART_MC_DTR],mcr[`UART_MC_OUT1],mcr[`UART_MC_OUT2]}
: {cts_pad_i,dsr_pad_i,ri_pad_i,dcd_pad_i};
assign dlab = lcr[`UART_LC_DL];
assign loopback = mcr[4];
// assign modem outputs
assign rts_pad_o = mcr[`UART_MC_RTS];
assign dtr_pad_o = mcr[`UART_MC_DTR];
// Interrupt signals
wire rls_int; // receiver line status interrupt
wire rda_int; // receiver data available interrupt
wire ti_int; // timeout indicator interrupt
wire thre_int; // transmitter holding register empty interrupt
wire ms_int; // modem status interrupt
// FIFO signals
reg tf_push;
reg rf_pop;
wire [`UART_FIFO_REC_WIDTH-1:0] rf_data_out;
wire rf_error_bit; // an error (parity or framing) is inside the fifo
wire rf_overrun;
wire rf_push_pulse;
wire [`UART_FIFO_COUNTER_W-1:0] rf_count;
wire [`UART_FIFO_COUNTER_W-1:0] tf_count;
wire [2:0] tstate;
wire [3:0] rstate;
wire [9:0] counter_t;
wire thre_set_en; // THRE status is delayed one character time when a character is written to fifo.
reg [7:0] block_cnt; // While counter counts, THRE status is blocked (delayed one character cycle)
reg [7:0] block_value; // One character length minus stop bit
// Transmitter Instance
wire serial_out;
uart_transmitter #(.SIM (SIM)) transmitter(clk, wb_rst_i, lcr, tf_push, wb_dat_i, enable, serial_out, tstate, tf_count, tx_reset, lsr_mask);
// Synchronizing and sampling serial RX input
uart_sync_flops i_uart_sync_flops
(
.rst_i (wb_rst_i),
.clk_i (clk),
.stage1_rst_i (1'b0),
.stage1_clk_en_i (1'b1),
.async_dat_i (srx_pad_i),
.sync_dat_o (srx_pad)
);
defparam i_uart_sync_flops.width = 1;
defparam i_uart_sync_flops.init_value = 1'b1;
// handle loopback
wire serial_in = loopback ? serial_out : srx_pad;
assign stx_pad_o = loopback ? 1'b1 : serial_out;
// Receiver Instance
uart_receiver receiver(clk, wb_rst_i, lcr, rf_pop, serial_in, enable,
counter_t, rf_count, rf_data_out, rf_error_bit, rf_overrun, rx_reset, lsr_mask, rstate, rf_push_pulse);
// Asynchronous reading here because the outputs are sampled in uart_wb.v file
always @(dl or dlab or ier or iir or scratch
or lcr or lsr or msr or rf_data_out or wb_addr_i or wb_re_i) // asynchrounous reading
begin
case (wb_addr_i)
`UART_REG_RB : wb_dat_o = dlab ? dl[`UART_DL1] : rf_data_out[10:3];
`UART_REG_IE : wb_dat_o = dlab ? dl[`UART_DL2] : {4'd0,ier};
`UART_REG_II : wb_dat_o = {4'b1100,iir};
`UART_REG_LC : wb_dat_o = lcr;
`UART_REG_LS : wb_dat_o = lsr;
`UART_REG_MS : wb_dat_o = msr;
`UART_REG_SR : wb_dat_o = scratch;
default: wb_dat_o = 8'b0; // ??
endcase // case(wb_addr_i)
end // always @ (dl or dlab or ier or iir or scratch...
// rf_pop signal handling
always @(posedge clk or posedge wb_rst_i)
begin
if (wb_rst_i)
rf_pop <= 0;
else
if (rf_pop) // restore the signal to 0 after one clock cycle
rf_pop <= 0;
else
if (wb_re_i && wb_addr_i == `UART_REG_RB && !dlab)
rf_pop <= 1; // advance read pointer
end
wire lsr_mask_condition;
wire iir_read;
wire msr_read;
wire fifo_read;
wire fifo_write;
assign lsr_mask_condition = (wb_re_i && wb_addr_i == `UART_REG_LS && !dlab);
assign iir_read = (wb_re_i && wb_addr_i == `UART_REG_II && !dlab);
assign msr_read = (wb_re_i && wb_addr_i == `UART_REG_MS && !dlab);
assign fifo_read = (wb_re_i && wb_addr_i == `UART_REG_RB && !dlab);
assign fifo_write = (wb_we_i && wb_addr_i == `UART_REG_TR && !dlab);
// lsr_mask_d delayed signal handling
always @(posedge clk or posedge wb_rst_i)
begin
if (wb_rst_i)
lsr_mask_d <= 0;
else // reset bits in the Line Status Register
lsr_mask_d <= lsr_mask_condition;
end
// lsr_mask is rise detected
assign lsr_mask = lsr_mask_condition && ~lsr_mask_d;
// msi_reset signal handling
always @(posedge clk or posedge wb_rst_i)
begin
if (wb_rst_i)
msi_reset <= 1;
else
if (msi_reset)
msi_reset <= 0;
else
if (msr_read)
msi_reset <= 1; // reset bits in Modem Status Register
end
//
// WRITES AND RESETS //
//
// Line Control Register
always @(posedge clk or posedge wb_rst_i)
if (wb_rst_i)
lcr <= 8'b00000011; // 8n1 setting
else
if (wb_we_i && wb_addr_i==`UART_REG_LC)
lcr <= wb_dat_i;
// Interrupt Enable Register or UART_DL2
always @(posedge clk or posedge wb_rst_i)
if (wb_rst_i)
begin
ier <= 4'b0000; // no interrupts after reset
`ifdef PRESCALER_PRESET_HARD
dl[`UART_DL2] <= `PRESCALER_HIGH_PRESET;
`else
dl[`UART_DL2] <= 8'b0;
`endif
end
else
if (wb_we_i && wb_addr_i==`UART_REG_IE)
if (dlab)
begin
dl[`UART_DL2] <=
`ifdef PRESCALER_PRESET_HARD
dl[`UART_DL2];
`else
wb_dat_i;
`endif
end
else
ier <= wb_dat_i[3:0]; // ier uses only 4 lsb
// FIFO Control Register and rx_reset, tx_reset signals
always @(posedge clk or posedge wb_rst_i)
if (wb_rst_i) begin
fcr <= 2'b11;
rx_reset <= 0;
tx_reset <= 0;
end else
if (wb_we_i && wb_addr_i==`UART_REG_FC) begin
fcr <= wb_dat_i[7:6];
rx_reset <= wb_dat_i[1];
tx_reset <= wb_dat_i[2];
end else begin
rx_reset <= 0;
tx_reset <= 0;
end
// Modem Control Register
always @(posedge clk or posedge wb_rst_i)
if (wb_rst_i)
mcr <= 5'b0;
else
if (wb_we_i && wb_addr_i==`UART_REG_MC)
mcr <= wb_dat_i[4:0];
// Scratch register
// Line Control Register
always @(posedge clk or posedge wb_rst_i)
if (wb_rst_i)
scratch <= 0; // 8n1 setting
else
if (wb_we_i && wb_addr_i==`UART_REG_SR)
scratch <= wb_dat_i;
// TX_FIFO or UART_DL1
always @(posedge clk or posedge wb_rst_i)
if (wb_rst_i)
begin
`ifdef PRESCALER_PRESET_HARD
dl[`UART_DL1] <= `PRESCALER_LOW_PRESET;
`else
dl[`UART_DL1] <= 8'b0;
`endif
tf_push <= 1'b0;
start_dlc <= 1'b0;
end
else
if (wb_we_i && wb_addr_i==`UART_REG_TR)
if (dlab)
begin
`ifdef PRESCALER_PRESET_HARD
dl[`UART_DL1] <= dl[`UART_DL1];
`else
dl[`UART_DL1] <= wb_dat_i;
`endif
start_dlc <= 1'b1; // enable DL counter
tf_push <= 1'b0;
end
else
begin
tf_push <= 1'b1;
start_dlc <= 1'b0;
end // else: !if(dlab)
else
begin
start_dlc <= 1'b0;
tf_push <= 1'b0;
end // else: !if(dlab)
// Receiver FIFO trigger level selection logic (asynchronous mux)
always @(fcr)
case (fcr[`UART_FC_TL])
2'b00 : trigger_level = 1;
2'b01 : trigger_level = 4;
2'b10 : trigger_level = 8;
2'b11 : trigger_level = 14;
endcase // case(fcr[`UART_FC_TL])
//
// STATUS REGISTERS //
//
// Modem Status Register
reg [3:0] delayed_modem_signals;
always @(posedge clk or posedge wb_rst_i)
begin
if (wb_rst_i)
begin
msr <= 0;
delayed_modem_signals[3:0] <= 0;
end
else begin
msr[`UART_MS_DDCD:`UART_MS_DCTS] <= msi_reset ? 4'b0 :
msr[`UART_MS_DDCD:`UART_MS_DCTS] | ({dcd, ri, dsr, cts} ^ delayed_modem_signals[3:0]);
msr[`UART_MS_CDCD:`UART_MS_CCTS] <= {dcd_c, ri_c, dsr_c, cts_c};
delayed_modem_signals[3:0] <= {dcd, ri, dsr, cts};
end
end
// Line Status Register
// activation conditions
assign lsr0 = (rf_count==0 && rf_push_pulse); // data in receiver fifo available set condition
assign lsr1 = rf_overrun; // Receiver overrun error
assign lsr2 = rf_data_out[1]; // parity error bit
assign lsr3 = rf_data_out[0]; // framing error bit
assign lsr4 = rf_data_out[2]; // break error in the character
assign lsr5 = (tf_count==5'b0 && thre_set_en); // transmitter fifo is empty
assign lsr6 = (tf_count==5'b0 && thre_set_en && (tstate == /*`S_IDLE */ 0)); // transmitter empty
assign lsr7 = rf_error_bit | rf_overrun;
// lsr bit0 (receiver data available)
reg lsr0_d;
always @(posedge clk or posedge wb_rst_i)
if (wb_rst_i) lsr0_d <= 0;
else lsr0_d <= lsr0;
always @(posedge clk or posedge wb_rst_i)
if (wb_rst_i) lsr0r <= 0;
else lsr0r <= (rf_count==1 && rf_pop && !rf_push_pulse || rx_reset) ? 1'b0 : // deassert condition
lsr0r || (lsr0 && ~lsr0_d); // set on rise of lsr0 and keep asserted until deasserted
// lsr bit 1 (receiver overrun)
reg lsr1_d; // delayed
always @(posedge clk or posedge wb_rst_i)
if (wb_rst_i) lsr1_d <= 0;
else lsr1_d <= lsr1;
always @(posedge clk or posedge wb_rst_i)
if (wb_rst_i) lsr1r <= 0;
else lsr1r <= lsr_mask ? 1'b0 : lsr1r || (lsr1 && ~lsr1_d); // set on rise
// lsr bit 2 (parity error)
reg lsr2_d; // delayed
always @(posedge clk or posedge wb_rst_i)
if (wb_rst_i) lsr2_d <= 0;
else lsr2_d <= lsr2;
always @(posedge clk or posedge wb_rst_i)
if (wb_rst_i) lsr2r <= 0;
else lsr2r <= lsr_mask ? 1'b0 : lsr2r || (lsr2 && ~lsr2_d); // set on rise
// lsr bit 3 (framing error)
reg lsr3_d; // delayed
always @(posedge clk or posedge wb_rst_i)
if (wb_rst_i) lsr3_d <= 0;
else lsr3_d <= lsr3;
always @(posedge clk or posedge wb_rst_i)
if (wb_rst_i) lsr3r <= 0;
else lsr3r <= lsr_mask ? 1'b0 : lsr3r || (lsr3 && ~lsr3_d); // set on rise
// lsr bit 4 (break indicator)
reg lsr4_d; // delayed
always @(posedge clk or posedge wb_rst_i)
if (wb_rst_i) lsr4_d <= 0;
else lsr4_d <= lsr4;
always @(posedge clk or posedge wb_rst_i)
if (wb_rst_i) lsr4r <= 0;
else lsr4r <= lsr_mask ? 1'b0 : lsr4r || (lsr4 && ~lsr4_d);
// lsr bit 5 (transmitter fifo is empty)
reg lsr5_d;
always @(posedge clk or posedge wb_rst_i)
if (wb_rst_i) lsr5_d <= 1;
else lsr5_d <= lsr5;
always @(posedge clk or posedge wb_rst_i)
if (wb_rst_i) lsr5r <= 1;
else lsr5r <= (fifo_write) ? 1'b0 : lsr5r || (lsr5 && ~lsr5_d);
// lsr bit 6 (transmitter empty indicator)
reg lsr6_d;
always @(posedge clk or posedge wb_rst_i)
if (wb_rst_i) lsr6_d <= 1;
else lsr6_d <= lsr6;
always @(posedge clk or posedge wb_rst_i)
if (wb_rst_i) lsr6r <= 1;
else lsr6r <= (fifo_write) ? 1'b0 : lsr6r || (lsr6 && ~lsr6_d);
// lsr bit 7 (error in fifo)
reg lsr7_d;
always @(posedge clk or posedge wb_rst_i)
if (wb_rst_i) lsr7_d <= 0;
else lsr7_d <= lsr7;
always @(posedge clk or posedge wb_rst_i)
if (wb_rst_i) lsr7r <= 0;
else lsr7r <= lsr_mask ? 1'b0 : lsr7r || (lsr7 && ~lsr7_d);
// Frequency divider
always @(posedge clk or posedge wb_rst_i)
begin
if (wb_rst_i)
dlc <= 0;
else
if (start_dlc | ~ (|dlc))
dlc <= dl - 16'd1; // preset counter
else
dlc <= dlc - 16'd1; // decrement counter
end
// Enable signal generation logic
always @(posedge clk or posedge wb_rst_i)
begin
if (wb_rst_i)
enable <= 1'b0;
else
if (|dl & ~(|dlc)) // dl>0 & dlc==0
enable <= 1'b1;
else
enable <= 1'b0;
end
// Delaying THRE status for one character cycle after a character is written to an empty fifo.
always @(lcr)
case (lcr[3:0])
4'b0000 : block_value = 95; // 6 bits
4'b0100 : block_value = 103; // 6.5 bits
4'b0001, 4'b1000 : block_value = 111; // 7 bits
4'b1100 : block_value = 119; // 7.5 bits
4'b0010, 4'b0101, 4'b1001 : block_value = 127; // 8 bits
4'b0011, 4'b0110, 4'b1010, 4'b1101 : block_value = 143; // 9 bits
4'b0111, 4'b1011, 4'b1110 : block_value = 159; // 10 bits
4'b1111 : block_value = 175; // 11 bits
endcase // case(lcr[3:0])
// Counting time of one character minus stop bit
always @(posedge clk or posedge wb_rst_i)
begin
if (wb_rst_i)
block_cnt <= 8'd0;
else
if(lsr5r & fifo_write) // THRE bit set & write to fifo occured
block_cnt <= SIM ? 8'd1 : block_value;
else
if (enable & block_cnt != 8'b0) // only work on enable times
block_cnt <= block_cnt - 8'd1; // decrement break counter
end // always of break condition detection
// Generating THRE status enable signal
assign thre_set_en = ~(|block_cnt);
//
// INTERRUPT LOGIC
//
assign rls_int = ier[`UART_IE_RLS] && (lsr[`UART_LS_OE] || lsr[`UART_LS_PE] || lsr[`UART_LS_FE] || lsr[`UART_LS_BI]);
assign rda_int = ier[`UART_IE_RDA] && (rf_count >= {1'b0,trigger_level});
assign thre_int = ier[`UART_IE_THRE] && lsr[`UART_LS_TFE];
assign ms_int = ier[`UART_IE_MS] && (| msr[3:0]);
assign ti_int = ier[`UART_IE_RDA] && (counter_t == 10'b0) && (|rf_count);
reg rls_int_d;
reg thre_int_d;
reg ms_int_d;
reg ti_int_d;
reg rda_int_d;
// delay lines
always @(posedge clk or posedge wb_rst_i)
if (wb_rst_i) rls_int_d <= 0;
else rls_int_d <= rls_int;
always @(posedge clk or posedge wb_rst_i)
if (wb_rst_i) rda_int_d <= 0;
else rda_int_d <= rda_int;
always @(posedge clk or posedge wb_rst_i)
if (wb_rst_i) thre_int_d <= 0;
else thre_int_d <= thre_int;
always @(posedge clk or posedge wb_rst_i)
if (wb_rst_i) ms_int_d <= 0;
else ms_int_d <= ms_int;
always @(posedge clk or posedge wb_rst_i)
if (wb_rst_i) ti_int_d <= 0;
else ti_int_d <= ti_int;
// rise detection signals
wire rls_int_rise;
wire thre_int_rise;
wire ms_int_rise;
wire ti_int_rise;
wire rda_int_rise;
assign rda_int_rise = rda_int & ~rda_int_d;
assign rls_int_rise = rls_int & ~rls_int_d;
assign thre_int_rise = thre_int & ~thre_int_d;
assign ms_int_rise = ms_int & ~ms_int_d;
assign ti_int_rise = ti_int & ~ti_int_d;
// interrupt pending flags
reg rls_int_pnd;
reg rda_int_pnd;
reg thre_int_pnd;
reg ms_int_pnd;
reg ti_int_pnd;
// interrupt pending flags assignments
always @(posedge clk or posedge wb_rst_i)
if (wb_rst_i) rls_int_pnd <= 0;
else
rls_int_pnd <= lsr_mask ? 1'b0 : // reset condition
rls_int_rise ? 1'b1 : // latch condition
rls_int_pnd && ier[`UART_IE_RLS]; // default operation: remove if masked
always @(posedge clk or posedge wb_rst_i)
if (wb_rst_i) rda_int_pnd <= 0;
else
rda_int_pnd <= ((rf_count == {1'b0,trigger_level}) && fifo_read) ? 1'b0 : // reset condition
rda_int_rise ? 1'b1 : // latch condition
rda_int_pnd && ier[`UART_IE_RDA]; // default operation: remove if masked
always @(posedge clk or posedge wb_rst_i)
if (wb_rst_i) thre_int_pnd <= 0;
else
thre_int_pnd <= fifo_write || (iir_read & ~iir[`UART_II_IP] & iir[`UART_II_II] == `UART_II_THRE)? 1'b0 :
thre_int_rise ? 1'b1 :
thre_int_pnd && ier[`UART_IE_THRE];
always @(posedge clk or posedge wb_rst_i)
if (wb_rst_i) ms_int_pnd <= 0;
else
ms_int_pnd <= msr_read ? 1'b0 :
ms_int_rise ? 1'b1 :
ms_int_pnd && ier[`UART_IE_MS];
always @(posedge clk or posedge wb_rst_i)
if (wb_rst_i) ti_int_pnd <= 0;
else
ti_int_pnd <= fifo_read ? 1'b0 :
ti_int_rise ? 1'b1 :
ti_int_pnd && ier[`UART_IE_RDA];
// end of pending flags
// INT_O logic
always @(posedge clk or posedge wb_rst_i)
begin
if (wb_rst_i)
int_o <= 1'b0;
else
int_o <=
rls_int_pnd ? ~lsr_mask :
rda_int_pnd ? 1'b1 :
ti_int_pnd ? ~fifo_read :
thre_int_pnd ? !(fifo_write & iir_read) :
ms_int_pnd ? ~msr_read :
1'd0; // if no interrupt are pending
end
// Interrupt Identification register
always @(posedge clk or posedge wb_rst_i)
begin
if (wb_rst_i)
iir <= 1;
else
if (rls_int_pnd) // interrupt is pending
begin
iir[`UART_II_II] <= `UART_II_RLS; // set identification register to correct value
iir[`UART_II_IP] <= 1'b0; // and clear the IIR bit 0 (interrupt pending)
end else // the sequence of conditions determines priority of interrupt identification
if (rda_int)
begin
iir[`UART_II_II] <= `UART_II_RDA;
iir[`UART_II_IP] <= 1'b0;
end
else if (ti_int_pnd)
begin
iir[`UART_II_II] <= `UART_II_TI;
iir[`UART_II_IP] <= 1'b0;
end
else if (thre_int_pnd)
begin
iir[`UART_II_II] <= `UART_II_THRE;
iir[`UART_II_IP] <= 1'b0;
end
else if (ms_int_pnd)
begin
iir[`UART_II_II] <= `UART_II_MS;
iir[`UART_II_IP] <= 1'b0;
end else // no interrupt is pending
begin
iir[`UART_II_II] <= 0;
iir[`UART_II_IP] <= 1'b1;
end
end
endmodule