XICS test case

Checks interrupt masking and priorities.

Adds to `make test_xics` which is run in `make check` also.

Signed-off-by: Michael Neuling <mikey@neuling.org>
jtag-port
Michael Neuling 5 years ago
parent b4f20c20b9
commit 0076f8bf1d

Binary file not shown.

@ -0,0 +1,3 @@
Test 0:PASS
Test 1:PASS
Test 2:PASS

@ -3,7 +3,7 @@
# Script to update console related tests from source
#

for i in sc illegal decrementer ; do
for i in sc illegal decrementer xics ; do
cd $i
make
cd -

@ -0,0 +1,5 @@
TEST=xics

include ../Makefile.test

xics.o : xics.h

@ -0,0 +1,186 @@
/* Copyright 2013-2014 IBM Corp.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
* implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/

#define STACK_TOP 0x4000

/* Load an immediate 64-bit value into a register */
#define LOAD_IMM64(r, e) \
lis r,(e)@highest; \
ori r,r,(e)@higher; \
rldicr r,r, 32, 31; \
oris r,r, (e)@h; \
ori r,r, (e)@l;

.section ".head","ax"

/* Microwatt currently enters in LE mode at 0x0 */
. = 0
.global _start
_start:
LOAD_IMM64(%r12, 0x000000000ffffff)
mtdec %r12
LOAD_IMM64(%r12, 0x9000000000008003)
mtmsrd %r12 // EE on
/* setup stack */
LOAD_IMM64(%r1, STACK_TOP - 0x100)
LOAD_IMM64(%r12, main)
mtctr %r12
bctrl
attn // terminate on exit
b .

#define EXCEPTION(nr) \
.= nr ;\
b .

/* More exception stubs */
EXCEPTION(0x300)
EXCEPTION(0x380)
EXCEPTION(0x400)
EXCEPTION(0x480)
. = 0x500
b __isr

EXCEPTION(0x600)
EXCEPTION(0x700)
EXCEPTION(0x800)
EXCEPTION(0x900)
EXCEPTION(0x980)
EXCEPTION(0xa00)
EXCEPTION(0xb00)
EXCEPTION(0xc00)
EXCEPTION(0xd00)

// ISR data

#define REDZONE_SIZE (512)
#define REG_SAVE_SIZE ((32 + 5)*8)
#define STACK_FRAME_C_MINIMAL 64

#define SAVE_NIA (32*8)
#define SAVE_LR (33*8)
#define SAVE_CTR (34*8)
#define SAVE_CR (35*8)
#define SAVE_SRR1 (36*8)

__isr:
/*
* Assume where we are coming from has a stack and can save there.
* We save the full register set. Since we are calling out to C, we
* could just save the ABI volatile registers
*/
stdu %r1,-(REG_SAVE_SIZE+REDZONE_SIZE)(%r1)
std %r0, 1*8(%r1)
// std %r1, 1*8(%r1)
std %r2, 2*8(%r1)
std %r3, 3*8(%r1)
std %r4, 4*8(%r1)
std %r5, 5*8(%r1)
std %r6, 6*8(%r1)
std %r7, 7*8(%r1)
std %r8, 8*8(%r1)
std %r9, 9*8(%r1)
std %r10, 10*8(%r1)
std %r11, 11*8(%r1)
std %r12, 12*8(%r1)
std %r13, 13*8(%r1)
std %r14, 14*8(%r1)
std %r15, 15*8(%r1)
std %r16, 16*8(%r1)
std %r17, 17*8(%r1)
std %r18, 18*8(%r1)
std %r19, 19*8(%r1)
std %r20, 20*8(%r1)
std %r21, 21*8(%r1)
std %r22, 22*8(%r1)
std %r23, 23*8(%r1)
std %r24, 24*8(%r1)
std %r25, 25*8(%r1)
std %r26, 26*8(%r1)
std %r27, 27*8(%r1)
std %r28, 28*8(%r1)
std %r29, 29*8(%r1)
std %r30, 30*8(%r1)
std %r31, 31*8(%r1)
mfsrr0 %r0
std %r0, SAVE_NIA*8(%r1)
mflr %r0
std %r0, SAVE_LR*8(%r1)
mfctr %r0
std %r0, SAVE_CTR*8(%r1)
mfcr %r0
std %r0, SAVE_CR*8(%r1)
mfsrr1 %r0
std %r0, SAVE_SRR1*8(%r1)

stdu %r1,-STACK_FRAME_C_MINIMAL(%r1)
LOAD_IMM64(%r3, isr)
mtctr %r3,
bctrl
nop
ld %r1, 0(%r1)

ld %r0, 1*8(%r1)
// ld %r1, 1*8(%r1) // do this at rfid
ld %r2, 2*8(%r1)
// ld %r3, 3*8(%r1) // do this at rfid
ld %r4, 4*8(%r1)
ld %r5, 5*8(%r1)
ld %r6, 6*8(%r1)
ld %r7, 7*8(%r1)
ld %r8, 8*8(%r1)
ld %r9, 9*8(%r1)
ld %r10, 10*8(%r1)
ld %r11, 11*8(%r1)
ld %r12, 12*8(%r1)
ld %r13, 13*8(%r1)
ld %r14, 14*8(%r1)
ld %r15, 15*8(%r1)
ld %r16, 16*8(%r1)
ld %r17, 17*8(%r1)
ld %r18, 18*8(%r1)
ld %r19, 19*8(%r1)
ld %r20, 20*8(%r1)
ld %r21, 21*8(%r1)
ld %r22, 22*8(%r1)
ld %r23, 23*8(%r1)
ld %r24, 24*8(%r1)
ld %r25, 25*8(%r1)
ld %r26, 26*8(%r1)
ld %r27, 27*8(%r1)
ld %r28, 28*8(%r1)
ld %r29, 29*8(%r1)
ld %r30, 30*8(%r1)
ld %r31, 31*8(%r1)

ld %r3, SAVE_LR*8(%r1)
mtlr %r3
ld %r3, SAVE_CTR*8(%r1)
mtctr %r3
ld %r3, SAVE_CR*8(%r1)
mtcr %r3
ld %r3, SAVE_SRR1*8(%r1)
mtsrr1 %r3
ld %r3, SAVE_NIA*8(%r1)
mtsrr0 %r3

/* restore %r3 */
ld %r3, 3*8(%r1)

/* do final fixup r1 */
ld %r1, 0*8(%r1)

rfid

@ -0,0 +1,13 @@
SECTIONS
{
_start = .;
. = 0;
.head : {
KEEP(*(.head))
}
. = 0x1000;
.text : { *(.text) }
. = 0x3000;
.data : { *(.data) }
.bss : { *(.bss) }
}

@ -0,0 +1,262 @@
#include <stddef.h>
#include <stdint.h>
#include <stdbool.h>
#include <limits.h>

#include "console.h"
#include "xics.h"

#undef DEBUG
//#define DEBUG 1

void print_number(unsigned int i) // only for i = 0-999
{
unsigned int j, k, m;
bool zeros = false;

k = 1000000000;

for (m = 0; m < 10 ; m++) {
j = i/k;
if (m == 9) zeros = true;
if (zeros || (j != 0)) {
putchar(48 + j);
zeros = true;
}
i = i % k;
k = k / 10;
}
}

#ifdef DEBUG
#define DEBUG_STR "\r\nDEBUG: "
void debug_print(int i)
{
putstr(DEBUG_STR, strlen(DEBUG_STR));
print_number(i);
putstr("\r\n", 2);
}

#define debug_putstr(a, b) putstr(a,b)
#else
#define debug_putstr(a, b)
#define debug_print(i)
#endif

#define ASSERT_FAIL "() ASSERT_FAILURE!\r\n "
#define assert(cond) \
if (!(cond)) { \
putstr(__FILE__, strlen(__FILE__)); \
putstr(":", 1); \
print_number(__LINE__); \
putstr(":", 1); \
putstr(__FUNCTION__, strlen(__FUNCTION__));\
putstr(ASSERT_FAIL, strlen(ASSERT_FAIL)); \
__asm__ ("attn"); \
}


volatile uint64_t isrs_run;

#define ISR_IPI 0x0000000000000001
#define ISR_UART 0x0000000000000002
#define ISR_SPURIOUS 0x0000000000000004

#define IPI "IPI\r\n"
void ipi_isr(void) {
debug_putstr(IPI, strlen(IPI));

isrs_run |= ISR_IPI;
}


#define UART "UART\r\n"
void uart_isr(void) {
debug_putstr(UART, strlen(UART));

potato_uart_irq_dis(); // disable interrupt to ack it

isrs_run |= ISR_UART;
}

// The hardware doesn't support this but it's part of XICS so add it.
#define SPURIOUS "SPURIOUS\r\n"
void spurious_isr(void) {
debug_putstr(SPURIOUS, strlen(SPURIOUS));

isrs_run |= ISR_SPURIOUS;
}

struct isr_op {
void (*func)(void);
int source_id;
};

struct isr_op isr_table[] = {
{ .func = ipi_isr, .source_id = 2 },
{ .func = uart_isr, .source_id = 16 },
{ .func = spurious_isr, .source_id = 0 },
{ .func = NULL, .source_id = 0 }
};

bool ipi_running;

#define ISR "ISR XISR="
void isr(void)
{
struct isr_op *op;
uint32_t xirr;

assert(!ipi_running); // check we aren't reentrant
ipi_running = true;

xirr = xics_read32(XICS_XIRR); // read hardware irq source

#ifdef DEBUG
putstr(ISR, strlen(ISR));
print_number(xirr & 0xff);
putstr("\r\n", 2);
#endif

op = isr_table;
while (1) {
assert(op->func); // didn't find isr
if (op->source_id == (xirr & 0x00ffffff)) {
op->func();
break;
}
op++;
}

xics_write32(XICS_XIRR, xirr); // EOI

ipi_running = false;
}

/*****************************************/

int xics_test_0(void)
{
// setup
xics_write8(XICS_XIRR, 0x00); // mask all interrupts
isrs_run = 0;

xics_write8(XICS_XIRR, 0x00); // mask all interrupts

// trigger two interrupts
potato_uart_irq_en(); // cause 0x500 interrupt
xics_write8(XICS_MFRR, 0x05); // cause 0x500 interrupt

// still masked, so shouldn't happen yet
assert(isrs_run == 0);

// unmask IPI only
xics_write8(XICS_XIRR, 0x40);
assert(isrs_run == ISR_IPI);

// unmask UART
xics_write8(XICS_XIRR, 0xc0);
assert(isrs_run == (ISR_IPI | ISR_UART));

// cleanup
xics_write8(XICS_XIRR, 0x00); // mask all interrupts
isrs_run = 0;

return 0;
}

int xics_test_1(void)
{
// setup
xics_write8(XICS_XIRR, 0x00); // mask all interrupts
isrs_run = 0;

xics_write8(XICS_XIRR, 0xff); // allow all interrupts

// should be none pending
assert(isrs_run == 0);

// trigger both
potato_uart_irq_en(); // cause 0x500 interrupt
xics_write8(XICS_MFRR, 0x05); // cause 0x500 interrupt

assert(isrs_run == (ISR_IPI | ISR_UART));

// cleanup
xics_write8(XICS_XIRR, 0x00); // mask all interrupts
isrs_run = 0;

return 0;
}

void mtmsrd(uint64_t val)
{
__asm__ volatile("mtmsrd %0" : : "r" (val));
}

int xics_test_2(void)
{
// setup
xics_write8(XICS_XIRR, 0x00); // mask all interrupts
isrs_run = 0;

// trigger interrupts with MSR[EE]=0 and show they are not run
mtmsrd(0x9000000000000003); // EE off

xics_write8(XICS_XIRR, 0xff); // allow all interrupts

// trigger an IPI
xics_write8(XICS_MFRR, 0x05); // cause 0x500 interrupt

assert(isrs_run == 0);

mtmsrd(0x9000000000008003); // EE on
assert(isrs_run == ISR_IPI);

// cleanup
xics_write8(XICS_XIRR, 0x00); // mask all interrupts
isrs_run = 0;

return 0;
}

#define TEST "Test "
#define PASS "PASS\r\n"
#define FAIL "FAIL\r\n"

int (*tests[])(void) = {
xics_test_0,
xics_test_1,
xics_test_2,
NULL
};

int main(void)
{
int fail = 0;
int i = 0;
int (*t)(void);

potato_uart_init();
ipi_running = false;

/* run the tests */
while (1) {
t = tests[i];
if (!t)
break;

putstr(TEST, strlen(TEST));
print_number(i);
putstr(": ", 1);
if (t() != 0) {
fail = 1;
putstr(FAIL, strlen(FAIL));
} else
putstr(PASS, strlen(PASS));

i++;
}

return fail;
}

@ -0,0 +1,36 @@
#include <stdint.h>

#define XICS_BASE 0xc0004000

static uint64_t xics_base = XICS_BASE;

#define XICS_XIRR_POLL 0x0
#define XICS_XIRR 0x4
#define XICS_RESV 0x8
#define XICS_MFRR 0xC

uint8_t xics_read8(int offset)
{
uint32_t val;

__asm__ volatile("lbzcix %0,%1,%2" : "=r" (val) : "b" (xics_base), "r" (offset));
return val;
}

void xics_write8(int offset, uint8_t val)
{
__asm__ volatile("stbcix %0,%1,%2" : : "r" (val), "b" (xics_base), "r" (offset));
}

uint32_t xics_read32(int offset)
{
uint32_t val;

__asm__ volatile("lwzcix %0,%1,%2" : "=r" (val) : "b" (xics_base), "r" (offset));
return val;
}

void xics_write32(int offset, uint32_t val)
{
__asm__ volatile("stwcix %0,%1,%2" : : "r" (val), "b" (xics_base), "r" (offset));
}
Loading…
Cancel
Save