Fix issues with CR rework

It simulated fine, but didn't synthesize. Fix some obvious issues
to get us going again.

Fixes: 9fbaea6f08 ("Rework CR file and add forwarding")
Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
nia-debug
Anton Blanchard 5 years ago committed by Anton Blanchard
parent b8d93728d7
commit 0254e40685

@ -51,7 +51,6 @@ package common is
output_carry: std_ulogic;
input_cr: std_ulogic;
output_cr: std_ulogic;
input_cr_data: std_ulogic_vector(31 downto 0);
end record;
constant Decode2ToExecute1Init : Decode2ToExecute1Type := (valid => '0', insn_type => OP_ILLEGAL, lr => '0', rc => '0', input_carry => '0', output_carry => '0', input_cr => '0', output_cr => '0', others => (others => '0'));


@ -22,14 +22,19 @@ architecture behaviour of cr_file is
begin
cr_create_0: process(all)
variable hi, lo : integer := 0;
variable cr_tmp : std_ulogic_vector(31 downto 0) := (others => '0');
begin
cr_tmp := crs;

for i in 0 to 7 loop
if w_in.write_cr_mask(i) = '1' then
lo := i*4;
hi := lo + 3;
crs_updated(hi downto lo) <= w_in.write_cr_data(hi downto lo);
cr_tmp(hi downto lo) := w_in.write_cr_data(hi downto lo);
end if;
end loop;

crs_updated <= cr_tmp;
end process;

-- synchronous writes
@ -38,23 +43,18 @@ begin
if rising_edge(clk) then
if w_in.write_cr_enable = '1' then
report "Writing " & to_hstring(w_in.write_cr_data) & " to CR mask " & to_hstring(w_in.write_cr_mask);
crs <= crs_updated;
end if;
crs <= crs_updated;
end if;
end process;

-- asynchronous reads
cr_read_0: process(all)
variable hi, lo : integer := 0;
begin
-- just return the entire CR to make mfcrf easier for now
if d_in.read = '1' then
report "Reading CR " & to_hstring(crs_updated);
end if;
if w_in.write_cr_enable then
d_out.read_cr_data <= crs_updated;
else
d_out.read_cr_data <= crs;
end if;
d_out.read_cr_data <= crs;
end process;
end architecture behaviour;

Loading…
Cancel
Save