Use a better input signal in writeback

w_in comes from the execution unit, it makes more sense to call
it e_in.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
nia-debug
Anton Blanchard 5 years ago committed by Anton Blanchard
parent 3f59396907
commit 147b259691

@ -120,7 +120,7 @@ begin
port map (clk => clk, m_in => decode2_to_multiply, m_out => multiply_to_writeback);

writeback_0: entity work.writeback
port map (clk => clk, w_in => execute2_to_writeback, l_in => loadstore2_to_writeback,
port map (clk => clk, e_in => execute2_to_writeback, l_in => loadstore2_to_writeback,
m_in => multiply_to_writeback, w_out => writeback_to_register_file,
c_out => writeback_to_cr_file, complete_out => complete);


@ -8,7 +8,7 @@ entity writeback is
port (
clk : in std_ulogic;

w_in : in Execute2ToWritebackType;
e_in : in Execute2ToWritebackType;
l_in : in Loadstore2ToWritebackType;
m_in : in MultiplyToWritebackType;

@ -20,7 +20,7 @@ entity writeback is
end entity writeback;

architecture behaviour of writeback is
signal w : Execute2ToWritebackType;
signal e : Execute2ToWritebackType;
signal l : Loadstore2ToWritebackType;
signal m : MultiplyToWritebackType;
signal w_tmp : WritebackToRegisterFileType;
@ -29,7 +29,7 @@ begin
writeback_0: process(clk)
begin
if rising_edge(clk) then
w <= w_in;
e <= e_in;
l <= l_in;
m <= m_in;
end if;
@ -38,7 +38,7 @@ begin
w_out <= w_tmp;
c_out <= c_tmp;

complete_out <= '1' when w.valid or l.valid or m.valid else '0';
complete_out <= '1' when e.valid or l.valid or m.valid else '0';

writeback_1: process(all)
begin
@ -48,18 +48,18 @@ begin
w_tmp <= WritebackToRegisterFileInit;
c_tmp <= WritebackToCrFileInit;

if w.valid = '1' then
if w.write_enable = '1' then
w_tmp.write_reg <= w.write_reg;
w_tmp.write_data <= w.write_data;
if e.valid = '1' then
if e.write_enable = '1' then
w_tmp.write_reg <= e.write_reg;
w_tmp.write_data <= e.write_data;
w_tmp.write_enable <= '1';
end if;

if w.write_cr_enable = '1' then
if e.write_cr_enable = '1' then
report "Writing CR ";
c_tmp.write_cr_enable <= '1';
c_tmp.write_cr_mask <= w.write_cr_mask;
c_tmp.write_cr_data <= w.write_cr_data;
c_tmp.write_cr_mask <= e.write_cr_mask;
c_tmp.write_cr_data <= e.write_cr_data;
end if;
end if;


Loading…
Cancel
Save