matthew1kalasky3
/
microwatt
forked from cores/microwatt
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

MMU: Implement reading of the process table

Browse Source 
This adds the PID register and repurposes SPR 720 as the PRTBL
register, which points to the base of the process table.  There
doesn't seem to be any point to implementing the partition table given
that we don't have hypervisor mode.

The MMU caches entry 0 of the process table internally (in pgtbl3)
plus the entry indexed by the value in the PID register (pgtbl0).
Both caches are invalidated by a tlbie[l] with RIC=2 or by a move to
PRTBL.  The pgtbl0 cache is invalidated by a move to PID.  The dTLB
and iTLB are cleared by a move to either PRTBL or PID.

Which of the two page table root pointers is used (pgtbl0 or pgtbl3)
depends on the MSB of the address being translated.  Since the segment
checking ensures that address(63) = address(62), this is sufficient to
map quadrants 0 and 3.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
jtag-port
Paul Mackerras 5 years ago
parent f3c6119cf6
commit 2843c99a71
8 changed files with 134 additions and 27 deletions
Show Stats Download Patch File Download Diff File

5
common.vhdl
Unescape Escape View File

@ -39,7 +39,8 @@ package common is
constant SPR_SPRG3U : spr_num_t := 259;
constant SPR_HSPRG0 : spr_num_t := 304;
constant SPR_HSPRG1 : spr_num_t := 305;
constant SPR_PGTBL0 : spr_num_t := 720;
constant SPR_PID : spr_num_t := 48;
constant SPR_PRTBL : spr_num_t := 720;

-- GPR indices in the register file (GPR only)
subtype gpr_index_t is std_ulogic_vector(4 downto 0);
@ -288,7 +289,7 @@ package common is
iside : std_ulogic;
load : std_ulogic;
priv : std_ulogic;
sprn : std_ulogic_vector(3 downto 0);
sprn : std_ulogic_vector(9 downto 0);
addr : std_ulogic_vector(63 downto 0);
rs : std_ulogic_vector(63 downto 0);
end record;

2
decode1.vhdl
Unescape Escape View File

@ -449,7 +449,7 @@ begin
v.decode.sgl_pipe := '1';
-- send MMU-related SPRs to loadstore1
case sprn is
when SPR_DAR | SPR_DSISR | SPR_PGTBL0 =>
when SPR_DAR | SPR_DSISR | SPR_PID | SPR_PRTBL =>
v.decode.unit := LDST;
when others =>
end case;

10
loadstore1.vhdl
Unescape Escape View File

@ -255,7 +255,7 @@ begin
mfspr := '1';
-- partial decode on SPR number should be adequate given
-- the restricted set that get sent down this path
if sprn(9) = '0' then
if sprn(9) = '0' and sprn(5) = '0' then
if sprn(0) = '0' then
sprval := x"00000000" & r.dsisr;
else
@ -266,16 +266,18 @@ begin
sprval := m_in.sprval;
end if;
when OP_MTSPR =>
done := '1';
if sprn(9) = '0' then
if sprn(9) = '0' and sprn(5) = '0' then
if sprn(0) = '0' then
v.dsisr := l_in.data(31 downto 0);
else
v.dar := l_in.data;
end if;
done := '1';
else
-- writing one of the SPRs in the MMU
mmu_mtspr := '1';
stall := '1';
v.state := TLBIE_WAIT;
end if;
when OP_FETCH_FAILED =>
-- send it to the MMU to do the radix walk
@ -466,7 +468,7 @@ begin
m_out.priv <= r.priv_mode;
m_out.tlbie <= v.tlbie;
m_out.mtspr <= mmu_mtspr;
m_out.sprn <= sprn(3 downto 0);
m_out.sprn <= sprn;
m_out.addr <= addr;
m_out.slbia <= l_in.insn(7);
m_out.rs <= l_in.data;

114
mmu.vhdl
Unescape Escape View File

@ -28,6 +28,8 @@ architecture behave of mmu is

type state_t is (IDLE,
TLB_WAIT,
PROC_TBL_READ,
PROC_TBL_WAIT,
SEGMENT_CHECK,
RADIX_LOOKUP,
RADIX_READ_WAIT,
@ -42,9 +44,15 @@ architecture behave of mmu is
store : std_ulogic;
priv : std_ulogic;
addr : std_ulogic_vector(63 downto 0);
-- config SPRs
prtbl : std_ulogic_vector(63 downto 0);
pid : std_ulogic_vector(31 downto 0);
-- internal state
state : state_t;
pgtbl0 : std_ulogic_vector(63 downto 0);
pt0_valid : std_ulogic;
pgtbl3 : std_ulogic_vector(63 downto 0);
pt3_valid : std_ulogic;
shift : unsigned(5 downto 0);
mask_size : unsigned(4 downto 0);
pgbase : std_ulogic_vector(55 downto 0);
@ -64,8 +72,8 @@ architecture behave of mmu is

begin
-- Multiplex internal SPR values back to loadstore1, selected
-- by l_in.sprn. Easy when there's only one...
l_out.sprval <= r.pgtbl0;
-- by l_in.sprn.
l_out.sprval <= r.prtbl when l_in.sprn(9) = '1' else x"00000000" & r.pid;

mmu_0: process(clk)
begin
@ -73,7 +81,9 @@ begin
if rst = '1' then
r.state <= IDLE;
r.valid <= '0';
r.pgtbl0 <= (others => '0');
r.pt0_valid <= '0';
r.pt3_valid <= '0';
r.prtbl <= (others => '0');
else
if rin.valid = '1' then
report "MMU got tlb miss for " & to_hstring(rin.addr);
@ -169,12 +179,17 @@ begin
variable itlb_load : std_ulogic;
variable tlbie_req : std_ulogic;
variable inval_all : std_ulogic;
variable prtbl_rd : std_ulogic;
variable pt_valid : std_ulogic;
variable effpid : std_ulogic_vector(31 downto 0);
variable prtable_addr : std_ulogic_vector(63 downto 0);
variable rts : unsigned(5 downto 0);
variable mbits : unsigned(5 downto 0);
variable pgtable_addr : std_ulogic_vector(63 downto 0);
variable pte : std_ulogic_vector(63 downto 0);
variable tlb_data : std_ulogic_vector(63 downto 0);
variable nonzero : std_ulogic;
variable pgtbl : std_ulogic_vector(63 downto 0);
variable perm_ok : std_ulogic;
variable rc_ok : std_ulogic;
variable addr : std_ulogic_vector(63 downto 0);
@ -193,6 +208,7 @@ begin
itlb_load := '0';
tlbie_req := '0';
inval_all := '0';
prtbl_rd := '0';

-- Radix tree data structures in memory are big-endian,
-- so we need to byte-swap them
@ -202,14 +218,21 @@ begin

case r.state is
when IDLE =>
if l_in.addr(63) = '0' then
pgtbl := r.pgtbl0;
pt_valid := r.pt0_valid;
else
pgtbl := r.pgtbl3;
pt_valid := r.pt3_valid;
end if;
-- rts == radix tree size, # address bits being translated
rts := unsigned('0' & r.pgtbl0(62 downto 61) & r.pgtbl0(7 downto 5));
rts := unsigned('0' & pgtbl(62 downto 61) & pgtbl(7 downto 5));
-- mbits == # address bits to index top level of tree
mbits := unsigned('0' & r.pgtbl0(4 downto 0));
mbits := unsigned('0' & pgtbl(4 downto 0));
-- set v.shift to rts so that we can use finalmask for the segment check
v.shift := rts;
v.mask_size := mbits(4 downto 0);
v.pgbase := r.pgtbl0(55 downto 8) & x"00";
v.pgbase := pgtbl(55 downto 8) & x"00";

if l_in.valid = '1' then
v.addr := l_in.addr;
@ -223,11 +246,23 @@ begin
-- RB[IS] != 0 or RB[AP] != 0, or for slbia
inval_all := l_in.slbia or l_in.addr(11) or l_in.addr(10) or
l_in.addr(7) or l_in.addr(6) or l_in.addr(5);
-- The RIC field of the tlbie instruction comes across on the
-- sprn bus as bits 2--3. RIC=2 flushes process table caches.
if l_in.sprn(3) = '1' then
v.pt0_valid := '0';
v.pt3_valid := '0';
end if;
v.state := TLB_WAIT;
else
v.valid := '1';
-- Use RPDS = 0 to disable radix tree walks
if mbits = 0 then
if pt_valid = '0' then
-- need to fetch process table entry
-- set v.shift so we can use finalmask for generating
-- the process table entry address
v.shift := unsigned('0' & r.prtbl(4 downto 0));
v.state := PROC_TBL_READ;
elsif mbits = 0 then
-- Use RPDS = 0 to disable radix tree walks
v.state := RADIX_ERROR;
v.invalid := '1';
else
@ -236,7 +271,20 @@ begin
end if;
end if;
if l_in.mtspr = '1' then
v.pgtbl0 := l_in.rs;
-- Move to PID needs to invalidate L1 TLBs and cached
-- pgtbl0 value. Move to PRTBL does that plus
-- invalidating the cached pgtbl3 value as well.
if l_in.sprn(9) = '0' then
v.pid := l_in.rs(31 downto 0);
else
v.prtbl := l_in.rs;
v.pt3_valid := '0';
end if;
v.pt0_valid := '0';
dcreq := '1';
tlbie_req := '1';
inval_all := '1';
v.state := TLB_WAIT;
end if;

when TLB_WAIT =>
@ -245,6 +293,41 @@ begin
v.state := IDLE;
end if;

when PROC_TBL_READ =>
dcreq := '1';
prtbl_rd := '1';
v.state := PROC_TBL_WAIT;

when PROC_TBL_WAIT =>
if d_in.done = '1' then
if d_in.err = '0' then
if r.addr(63) = '1' then
v.pgtbl3 := data;
v.pt3_valid := '1';
else
v.pgtbl0 := data;
v.pt0_valid := '1';
end if;
-- rts == radix tree size, # address bits being translated
rts := unsigned('0' & data(62 downto 61) & data(7 downto 5));
-- mbits == # address bits to index top level of tree
mbits := unsigned('0' & data(4 downto 0));
-- set v.shift to rts so that we can use finalmask for the segment check
v.shift := rts;
v.mask_size := mbits(4 downto 0);
v.pgbase := data(55 downto 8) & x"00";
if mbits = 0 then
v.state := RADIX_ERROR;
v.invalid := '1';
else
v.state := SEGMENT_CHECK;
end if;
else
v.state := RADIX_ERROR;
v.badtree := '1';
end if;
end if;

when SEGMENT_CHECK =>
mbits := '0' & r.mask_size;
v.shift := r.shift + (31 - 12) - mbits;
@ -331,6 +414,16 @@ begin

end case;

if r.addr(63) = '1' then
effpid := x"00000000";
else
effpid := r.pid;
end if;
prtable_addr := x"00" & r.prtbl(55 downto 36) &
((r.prtbl(35 downto 12) and not finalmask(23 downto 0)) or
(effpid(31 downto 8) and finalmask(23 downto 0))) &
effpid(7 downto 0) & "0000";

pgtable_addr := x"00" & r.pgbase(55 downto 19) &
((r.pgbase(18 downto 3) and not mask) or (addrsh and mask)) &
"000";
@ -348,6 +441,9 @@ begin
elsif tlb_load = '1' then
addr := r.addr(63 downto 12) & x"000";
tlb_data := pte;
elsif prtbl_rd = '1' then
addr := prtable_addr;
tlb_data := (others => '0');
else
addr := pgtable_addr;
tlb_data := (others => '0');

11
tests/mmu/mmu.c
Unescape Escape View File

@ -21,6 +21,8 @@ static inline void do_tlbie(unsigned long rb, unsigned long rs)
#define DAR 19
#define SRR0 26
#define SRR1 27
#define PID 48
#define PRTBL 720

static inline unsigned long mfspr(int sprnum)
{
@ -110,15 +112,20 @@ void zero_memory(void *ptr, unsigned long nbytes)
* 8kB PGD level pointing to 4kB PTE pages.
*/
unsigned long *pgdir = (unsigned long *) 0x10000;
unsigned long free_ptr = 0x12000;
unsigned long *proc_tbl = (unsigned long *) 0x12000;
unsigned long free_ptr = 0x13000;
void *eas_mapped[4];
int neas_mapped;

void init_mmu(void)
{
/* set up process table */
zero_memory(proc_tbl, 512 * sizeof(unsigned long));
mtspr(PRTBL, (unsigned long)proc_tbl);
mtspr(PID, 1);
zero_memory(pgdir, 1024 * sizeof(unsigned long));
/* RTS = 0 (2GB address space), RPDS = 10 (1024-entry top level) */
mtspr(720, (unsigned long) pgdir | 10);
store_pte(&proc_tbl[2 * 1], (unsigned long) pgdir | 10);
do_tlbie(0xc00, 0); /* invalidate all TLB entries */
}


19
tests/privileged/privileged.c
Unescape Escape View File

@ -13,6 +13,8 @@ extern int call_with_msr(unsigned long arg, int (*fn)(unsigned long), unsigned l

#define SRR0 26
#define SRR1 27
#define PID 48
#define PRTBL 720

static inline unsigned long mfspr(int sprnum)
{
@ -55,11 +57,6 @@ void print_test_number(int i)
putchar(':');
}

static inline void do_tlbie(unsigned long rb, unsigned long rs)
{
__asm__ volatile("tlbie %0,%1" : : "r" (rb), "r" (rs) : "memory");
}

static inline void store_pte(unsigned long *p, unsigned long pte)
{
__asm__ volatile("stdbrx %1,0,%0" : : "r" (p), "r" (pte) : "memory");
@ -107,14 +104,18 @@ void zero_memory(void *ptr, unsigned long nbytes)
* 8kB PGD level pointing to 4kB PTE pages.
*/
unsigned long *pgdir = (unsigned long *) 0x10000;
unsigned long free_ptr = 0x12000;
unsigned long *proc_tbl = (unsigned long *) 0x12000;
unsigned long free_ptr = 0x13000;

void init_mmu(void)
{
zero_memory(pgdir, 1024 * sizeof(unsigned long));
/* set up process table */
zero_memory(proc_tbl, 512 * sizeof(unsigned long));
/* RTS = 0 (2GB address space), RPDS = 10 (1024-entry top level) */
mtspr(720, (unsigned long) pgdir | 10);
do_tlbie(0xc00, 0); /* invalidate all TLB entries */
store_pte(&proc_tbl[2 * 1], (unsigned long) pgdir | 10);
mtspr(PRTBL, (unsigned long)proc_tbl);
mtspr(PID, 1);
zero_memory(pgdir, 1024 * sizeof(unsigned long));
}

static unsigned long *read_pgd(unsigned long i)

BIN
tests/test_mmu.bin
View File

Binary file not shown.

BIN
tests/test_privileged.bin
View File

Binary file not shown.
Write Preview
Loading…
Cancel
Save