matthew1kalasky3
/
microwatt
forked from cores/microwatt
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

execute1: Move branch adder after register

Browse Source 
This does the addition of the instruction NIA and the branch offset
after the register at the output of execute1 rather than before.
The propagation through the adder was showing up as a critical path
on the A7-100.  Performance is unaffected and now it makes timing.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
cache-tlb-parameters-2
Paul Mackerras 3 years ago
parent cb1e3f6d70
commit 9ea1ab0215
1 changed files with 70 additions and 46 deletions
Show Stats Download Patch File Download Diff File

116
execute1.vhdl
Unescape Escape View File

@ -53,7 +53,6 @@ end entity execute1;
architecture behaviour of execute1 is
type reg_type is record
e : Execute1ToWritebackType;
f : Execute1ToFetch1Type;
busy: std_ulogic;
terminate: std_ulogic;
fp_exception_next : std_ulogic;
@ -71,15 +70,24 @@ architecture behaviour of execute1 is
slow_op_oe : std_ulogic;
slow_op_xerc : xer_common_t;
last_nia : std_ulogic_vector(63 downto 0);
redirect : std_ulogic;
abs_br : std_ulogic;
do_intr : std_ulogic;
vector : integer range 0 to 16#fff#;
br_offset : std_ulogic_vector(63 downto 0);
redir_mode : std_ulogic_vector(3 downto 0);
log_addr_spr : std_ulogic_vector(31 downto 0);
end record;
constant reg_type_init : reg_type :=
(e => Execute1ToWritebackInit, f => Execute1ToFetch1Init,
(e => Execute1ToWritebackInit,
busy => '0', lr_update => '0', terminate => '0',
fp_exception_next => '0', trace_next => '0', prev_op => OP_ILLEGAL,
mul_in_progress => '0', mul_finish => '0', div_in_progress => '0', cntz_in_progress => '0',
slow_op_insn => OP_ILLEGAL, slow_op_rc => '0', slow_op_oe => '0', slow_op_xerc => xerc_init,
next_lr => (others => '0'), last_nia => (others => '0'), others => (others => '0'));
next_lr => (others => '0'), last_nia => (others => '0'),
redirect => '0', abs_br => '0', do_intr => '0', vector => 0,
br_offset => (others => '0'), redir_mode => "0000",
others => (others => '0'));

signal r, rin : reg_type;

@ -340,6 +348,7 @@ begin
variable spr_val : std_ulogic_vector(63 downto 0);
variable addend : std_ulogic_vector(127 downto 0);
variable do_trace : std_ulogic;
variable f : Execute1ToFetch1Type;
variable fv : Execute1ToFPUType;
begin
result := (others => '0');
@ -352,8 +361,15 @@ begin

v := r;
v.e := Execute1ToWritebackInit;
v.redirect := '0';
v.abs_br := '0';
v.do_intr := '0';
v.vector := 0;
v.br_offset := (others => '0');
v.redir_mode := ctrl.msr(MSR_IR) & not ctrl.msr(MSR_PR) &
not ctrl.msr(MSR_LE) & not ctrl.msr(MSR_SF);

lv := Execute1ToLoadstore1Init;
v.f.redirect := '0';
fv := Execute1ToFPUInit;

-- XER forwarding. To avoid having to track XER hazards, we use
@ -471,11 +487,11 @@ begin
irq_valid := '0';
if ctrl.msr(MSR_EE) = '1' then
if ctrl.dec(63) = '1' then
v.f.redirect_nia := std_logic_vector(to_unsigned(16#900#, 64));
v.vector := 16#900#;
report "IRQ valid: DEC";
irq_valid := '1';
elsif ext_irq_in = '1' then
v.f.redirect_nia := std_logic_vector(to_unsigned(16#500#, 64));
v.vector := 16#500#;
report "IRQ valid: External";
irq_valid := '1';
end if;
@ -484,11 +500,6 @@ begin
v.terminate := '0';
icache_inval <= '0';
v.busy := '0';
-- send MSR[IR], ~MSR[PR], ~MSR[LE] and ~MSR[SF] up to fetch1
v.f.virt_mode := ctrl.msr(MSR_IR);
v.f.priv_mode := not ctrl.msr(MSR_PR);
v.f.big_endian := not ctrl.msr(MSR_LE);
v.f.mode_32bit := not ctrl.msr(MSR_SF);

-- Next insn adder used in a couple of places
next_nia := std_ulogic_vector(unsigned(e_in.nia) + 4);
@ -546,13 +557,13 @@ begin
if HAS_FPU and r.fp_exception_next = '1' then
-- This is used for FP-type program interrupts that
-- become pending due to MSR[FE0,FE1] changing from 00 to non-zero.
v.f.redirect_nia := std_logic_vector(to_unsigned(16#700#, 64));
v.vector := 16#700#;
ctrl_tmp.srr1(63 - 43) <= '1';
ctrl_tmp.srr1(63 - 47) <= '1';
else
-- Generate a trace interrupt rather than executing the next instruction
-- or taking any asynchronous interrupt
v.f.redirect_nia := std_logic_vector(to_unsigned(16#d00#, 64));
v.vector := 16#d00#;
ctrl_tmp.srr1(63 - 33) <= '1';
if r.prev_op = OP_LOAD or r.prev_op = OP_ICBI or r.prev_op = OP_ICBT or
r.prev_op = OP_DCBT or r.prev_op = OP_DCBST or r.prev_op = OP_DCBF then
@ -574,7 +585,7 @@ begin
instr_is_privileged(e_in.insn_type, e_in.insn) then
-- generate a program interrupt
exception := '1';
v.f.redirect_nia := std_logic_vector(to_unsigned(16#700#, 64));
v.vector := 16#700#;
-- set bit 45 to indicate privileged instruction type interrupt
ctrl_tmp.srr1(63 - 45) <= '1';
report "privileged instruction";
@ -586,7 +597,7 @@ begin
elsif HAS_FPU and valid_in = '1' and ctrl.msr(MSR_FP) = '0' and e_in.fac = FPU then
-- generate a floating-point unavailable interrupt
exception := '1';
v.f.redirect_nia := std_logic_vector(to_unsigned(16#800#, 64));
v.vector := 16#800#;
report "FP unavailable interrupt";

elsif valid_in = '1' and e_in.unit = ALU then
@ -614,7 +625,7 @@ begin
if e_in.insn(1) = '1' then
exception := '1';
exception_nextpc := '1';
v.f.redirect_nia := std_logic_vector(to_unsigned(16#C00#, 64));
v.vector := 16#C00#;
report "sc";
else
illegal := '1';
@ -702,7 +713,7 @@ begin
end loop;
else
-- trap instructions (tw, twi, td, tdi)
v.f.redirect_nia := std_logic_vector(to_unsigned(16#700#, 64));
v.vector := 16#700#;
-- set bit 46 to say trap occurred
ctrl_tmp.srr1(63 - 46) <= '1';
if or (trapval and insn_to(e_in.insn)) = '1' then
@ -785,10 +796,8 @@ begin
end if;

when OP_RFID =>
v.f.virt_mode := a_in(MSR_IR) or a_in(MSR_PR);
v.f.priv_mode := not a_in(MSR_PR);
v.f.big_endian := not a_in(MSR_LE);
v.f.mode_32bit := not a_in(MSR_SF);
v.redir_mode := (a_in(MSR_IR) or a_in(MSR_PR)) & not a_in(MSR_PR) &
not a_in(MSR_LE) & not a_in(MSR_SF);
-- Can't use msr_copy here because the partial function MSR
-- bits should be left unchanged, not zeroed.
ctrl_tmp.msr(63 downto 31) <= a_in(63 downto 31);
@ -1032,8 +1041,8 @@ begin
end if;

when OP_ISYNC =>
v.f.redirect := '1';
v.f.redirect_nia := next_nia;
v.redirect := '1';
v.br_offset := std_ulogic_vector(to_unsigned(4, 64));

when OP_ICBI =>
icache_inval <= '1';
@ -1063,16 +1072,13 @@ begin
ctrl_tmp.cfar <= e_in.nia;
end if;
if e_in.br_pred = '0' then
if abs_branch = '1' then
v.f.redirect_nia := b_in;
else
v.f.redirect_nia := std_ulogic_vector(signed(e_in.nia) + signed(b_in));
end if;
v.br_offset := b_in;
v.abs_br := abs_branch;
else
v.f.redirect_nia := next_nia;
v.br_offset := std_ulogic_vector(to_unsigned(4, 64));
end if;
if taken_branch /= e_in.br_pred then
v.f.redirect := '1';
v.redirect := '1';
end if;
end if;

@ -1114,7 +1120,7 @@ begin
-- valid_in = 0. Hence they don't happen in the same cycle as any of
-- the cases above which depend on valid_in = 1.

if r.f.redirect = '1' then
if r.redirect = '1' then
v.e.valid := '1';
end if;
if r.lr_update = '1' then
@ -1195,14 +1201,14 @@ begin
-- The case where MSR[FE0,FE1] goes from zero to non-zero is
-- handled above by mtmsrd and rfid setting v.fp_exception_next.
if HAS_FPU and fp_in.interrupt = '1' then
v.f.redirect_nia := std_logic_vector(to_unsigned(16#700#, 64));
v.vector := 16#700#;
ctrl_tmp.srr1(63 - 43) <= '1';
exception := '1';
end if;

if illegal = '1' or (HAS_FPU and fp_in.illegal = '1') then
exception := '1';
v.f.redirect_nia := std_logic_vector(to_unsigned(16#700#, 64));
v.vector := 16#700#;
-- Since we aren't doing Hypervisor emulation assist (0xe40) we
-- set bit 44 to indicate we have an illegal
ctrl_tmp.srr1(63 - 44) <= '1';
@ -1226,12 +1232,12 @@ begin
-- or ISI or ISegI for instruction fetch exceptions
if l_in.exception = '1' then
if l_in.alignment = '1' then
v.f.redirect_nia := std_logic_vector(to_unsigned(16#600#, 64));
v.vector := 16#600#;
elsif l_in.instr_fault = '0' then
if l_in.segment_fault = '0' then
v.f.redirect_nia := std_logic_vector(to_unsigned(16#300#, 64));
v.vector := 16#300#;
else
v.f.redirect_nia := std_logic_vector(to_unsigned(16#380#, 64));
v.vector := 16#380#;
end if;
else
if l_in.segment_fault = '0' then
@ -1239,9 +1245,9 @@ begin
ctrl_tmp.srr1(63 - 35) <= l_in.perm_error; -- noexec fault
ctrl_tmp.srr1(63 - 44) <= l_in.badtree;
ctrl_tmp.srr1(63 - 45) <= l_in.rc_error;
v.f.redirect_nia := std_logic_vector(to_unsigned(16#400#, 64));
v.vector := 16#400#;
else
v.f.redirect_nia := std_logic_vector(to_unsigned(16#480#, 64));
v.vector := 16#480#;
end if;
end if;
v.e.exc_write_enable := '1';
@ -1251,19 +1257,37 @@ begin

if exception = '1' or l_in.exception = '1' then
ctrl_tmp.irq_state <= WRITE_SRR1;
v.f.redirect := '1';
v.f.virt_mode := '0';
v.f.priv_mode := '1';
-- XXX need an interrupt LE bit here, e.g. from LPCR
v.f.big_endian := '0';
v.f.mode_32bit := '0';
v.redirect := '1';
v.do_intr := '1';
end if;

if v.f.redirect = '1' then
if v.redirect = '1' then
v.busy := '1';
v.e.valid := '0';
end if;

-- Outputs to fetch1
f.redirect := r.redirect;
if r.do_intr = '1' then
f.redirect_nia := std_ulogic_vector(to_unsigned(r.vector, 64));
f.virt_mode := '0';
f.priv_mode := '1';
-- XXX need an interrupt LE bit here, e.g. from LPCR
f.big_endian := '0';
f.mode_32bit := '0';
else
if r.abs_br = '1' then
f.redirect_nia := r.br_offset;
else
f.redirect_nia := std_ulogic_vector(unsigned(r.last_nia) + unsigned(r.br_offset));
end if;
-- send MSR[IR], ~MSR[PR], ~MSR[LE] and ~MSR[SF] up to fetch1
f.virt_mode := r.redir_mode(3);
f.priv_mode := r.redir_mode(2);
f.big_endian := r.redir_mode(1);
f.mode_32bit := r.redir_mode(0);
end if;

-- Outputs to loadstore1 (async)
lv.op := e_in.insn_type;
lv.nia := e_in.nia;
@ -1309,7 +1333,7 @@ begin
rin <= v;

-- update outputs
f_out <= r.f;
f_out <= f;
l_out <= lv;
e_out <= r.e;
fp_out <= fv;

Write Preview
Loading…
Cancel
Save