You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
microwatt/tests/trace/head.S

222 lines
3.6 KiB
ArmAsm

/* Copyright 2020 Paul Mackerras, IBM Corp.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
* implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/* Load an immediate 64-bit value into a register */
#define LOAD_IMM64(r, e) \
lis r,(e)@highest; \
ori r,r,(e)@higher; \
rldicr r,r, 32, 31; \
oris r,r, (e)@h; \
ori r,r, (e)@l;
.section ".head","ax"
/*
* Microwatt currently enters in LE mode at 0x0, so we don't need to
* do any endian fix ups
*/
. = 0
.global _start
_start:
LOAD_IMM64(%r10,__bss_start)
LOAD_IMM64(%r11,__bss_end)
subf %r11,%r10,%r11
addi %r11,%r11,63
srdi. %r11,%r11,6
beq 2f
mtctr %r11
1: dcbz 0,%r10
addi %r10,%r10,64
bdnz 1b
2: LOAD_IMM64(%r1,__stack_top)
li %r0,0
stdu %r0,-16(%r1)
mtsprg2 %r0
LOAD_IMM64(%r12, main)
mtctr %r12
bctrl
attn // terminate on exit
b .
exception:
mtsprg3 %r0
mfsprg2 %r0
cmpdi %r0,0
bne call_ret
attn
#define EXCEPTION(nr) \
.= nr ;\
li %r0,nr ;\
b exception
EXCEPTION(0x300)
EXCEPTION(0x380)
EXCEPTION(0x400)
EXCEPTION(0x480)
EXCEPTION(0x500)
EXCEPTION(0x600)
EXCEPTION(0x700)
EXCEPTION(0x800)
EXCEPTION(0x900)
EXCEPTION(0x980)
EXCEPTION(0xa00)
EXCEPTION(0xb00)
EXCEPTION(0xc00)
EXCEPTION(0xd00)
EXCEPTION(0xe00)
EXCEPTION(0xe20)
EXCEPTION(0xe40)
EXCEPTION(0xe60)
EXCEPTION(0xe80)
EXCEPTION(0xf00)
EXCEPTION(0xf20)
EXCEPTION(0xf40)
EXCEPTION(0xf60)
EXCEPTION(0xf80)
. = 0x1000
/*
* Call a function in a context with a given MSR value.
* r3, r4 = args; r5 = function, r6 = MSR,
* r7 = array in which to return r3 and r4
* Return value is trap number or 0.
*/
.globl callit
callit:
mflr %r0
std %r0,16(%r1)
stdu %r1,-256(%r1)
mfcr %r8
stw %r8,100(%r1)
std %r13,104(%r1)
std %r14,112(%r1)
std %r15,120(%r1)
std %r16,128(%r1)
std %r17,136(%r1)
std %r18,144(%r1)
std %r19,152(%r1)
std %r20,160(%r1)
std %r21,168(%r1)
std %r22,176(%r1)
std %r23,184(%r1)
std %r24,192(%r1)
std %r25,200(%r1)
std %r26,208(%r1)
std %r27,216(%r1)
std %r28,224(%r1)
std %r29,232(%r1)
std %r30,240(%r1)
std %r31,248(%r1)
li %r10,call_ret@l
mtlr %r10
mtsprg0 %r7
mtsprg1 %r1
mtsprg2 %r2
li %r11,0
mtsprg3 %r11
mtsrr0 %r5
mtsrr1 %r6
rfid
call_ret:
mfsprg0 %r7 /* restore regs in case of trap */
mfsprg1 %r1
mfsprg2 %r2
li %r0,0
mtsprg2 %r0
std %r3,0(%r7)
std %r4,8(%r7)
mfsprg3 %r3
lwz %r8,100(%r1)
mtcr %r8
ld %r13,104(%r1)
ld %r14,112(%r1)
ld %r15,120(%r1)
ld %r16,128(%r1)
ld %r17,136(%r1)
ld %r18,144(%r1)
ld %r19,152(%r1)
ld %r20,160(%r1)
ld %r21,168(%r1)
ld %r22,176(%r1)
ld %r23,184(%r1)
ld %r24,192(%r1)
ld %r25,200(%r1)
ld %r26,208(%r1)
ld %r27,216(%r1)
ld %r28,224(%r1)
ld %r29,232(%r1)
ld %r30,240(%r1)
ld %r31,248(%r1)
addi %r1,%r1,256
ld %r0,16(%r1)
mtlr %r0
blr
.global test1
test1:
addi %r3,%r4,1
li %r3,0
blr
.global test2
test2:
ld %r3,0(%r4)
li %r3,-1
blr
.global test3
test3:
stw %r3,0(%r4)
li %r3,-1
blr
.global test4
test4:
dcbt 0,%r3
li %r3,-1
blr
.global test5
test5:
dcbtst 0,%r3
li %r3,-1
blr
.global test6
test6:
nop
nop
b 1f
li %r3,2
blr
1: li %r3,1
blr
.global test7
test7:
li %r4,1
cmpwi %r4,0
bne 1f
li %r3,-1
1: blr
.global test8
test8:
lfd %f0,0(%r3)
blr