forked from cores/microwatt
You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
db937403ec
A first pass at ghdl synthesis using yosys and nextpnr. It runs hello world or micropython if the FPGA has enough block RAM (eg ECP5 85F). The hello world testcase also loops UART rx to tx in software (ie not a hardware loopback). It uses Docker images, so no software needs to be installed. If you prefer podman you can use that too. Edit Makefile.synth to configure your FPGA, JTAG device etc. To build: make -f Makefile.synth and to program: make -f Makefile.synth prog A few issues: We need to add PLL support. Right now Microwatt runs at whatever the external clock frequency is and the baud rate gets scaled by how far off 50MHz it is. This means on the ecp5-evn with a 12 MHz clock rate the baud rate is a quite strange 27650 (115200 * 50 / 12). On my OrangeCrab with a 50MHz clock the UART is 115200. It uses a large amount of resources, way more than it should. There are still some ghdl/yosys issues to be sorted out. Signed-off-by: Anton Blanchard <anton@linux.ibm.com> |
5 years ago | |
|---|---|---|
| .. | ||
| ecp5-evn.lpf | ||
| orange-crab.lpf | ||