You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Michael Neuling 5aaa63ee3b Add PLL for ECP5 device ... Means we can synthesize at 40Mhz (where we currently make timing) and our UART still works at 115200 baud. Tested working hello world unmodified with ECP5 eval board. Orange Crab is updated but is untested. Signed-off-by: Michael Neuling <mikey@neuling.org>		4 years ago
..
LICENSE	Initial import of microwatt	5 years ago
arty_a7.xdc	uart: Import and hook up opencore 16550 compatible UART	4 years ago
clk_gen_bypass.vhd	Fix clk_gen_bypass	5 years ago
clk_gen_ecp5.vhd	Add PLL for ECP5 device	4 years ago
clk_gen_mcmm.vhd	Improve PLL/MMCM clocks configuration	5 years ago
clk_gen_plle2.vhd	Improve PLL/MMCM clocks configuration	5 years ago
cmod_a7-35.xdc	Add SPI configuration to Xilinx constraint files	5 years ago
firmware.hex	Add a few more FPGA related files	5 years ago
hello_world.hex	hello_world: Use new headers and frequency from syscon	5 years ago
main_bram.vhdl	Fix some ghdlsynth issues with fpga_bram	5 years ago
nexys-video.xdc	spi: Add SPI Flash controller	5 years ago
nexys_a7.xdc	Add SPI configuration to Xilinx constraint files	5 years ago
pp_fifo.vhd	pp_fifo: Fix full fifo losing all data on simultaneous push & pop	5 years ago
pp_soc_uart.vhd	uart: Remove combinational loops on ack and stall signal	5 years ago
pp_utilities.vhd	Initial import of microwatt	5 years ago
soc_reset.vhdl	soc_reset: Use counters, add synchronizers	5 years ago
soc_reset_tb.vhdl	Exit cleanly from testbench on success	5 years ago
top-arty.vhdl	uart: Make 16550 the default	4 years ago
top-generic.vhdl	uart: Make 16550 the default	4 years ago
top-nexys-video.vhdl	uart: Make 16550 the default	4 years ago