microwatt/writeback.vhdl

library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;

library work;
use work.common.all;
use work.crhelpers.all;

entity writeback is
    port (
        clk          : in std_ulogic;
        rst          : in std_ulogic;

        e_in         : in Execute1ToWritebackType;
        l_in         : in Loadstore1ToWritebackType;
        fp_in        : in FPUToWritebackType;

        w_out        : out WritebackToRegisterFileType;
        c_out        : out WritebackToCrFileType;
        f_out        : out WritebackToFetch1Type;

        flush_out    : out std_ulogic;
        interrupt_out: out std_ulogic;
        complete_out : out instr_tag_t
        );
end entity writeback;

architecture behaviour of writeback is
    type irq_state_t is (WRITE_SRR0, WRITE_SRR1);

    type reg_type is record
        state : irq_state_t;
        srr1  : std_ulogic_vector(63 downto 0);
    end record;

    signal r, rin : reg_type;

begin
    writeback_0: process(clk)
        variable x : std_ulogic_vector(0 downto 0);
        variable y : std_ulogic_vector(0 downto 0);
        variable w : std_ulogic_vector(0 downto 0);
    begin
        if rising_edge(clk) then
            if rst = '1' then
                r.state <= WRITE_SRR0;
                r.srr1 <= (others => '0');
            else
                r <= rin;
            end if;

            -- Do consistency checks only on the clock edge
            x(0) := e_in.valid;
            y(0) := l_in.valid;
            w(0) := fp_in.valid;
            assert (to_integer(unsigned(x)) + to_integer(unsigned(y)) +
                    to_integer(unsigned(w))) <= 1 severity failure;

            x(0) := e_in.write_enable;
            y(0) := l_in.write_enable;
            w(0) := fp_in.write_enable;
            assert (to_integer(unsigned(x)) + to_integer(unsigned(y)) +
                    to_integer(unsigned(w))) <= 1 severity failure;

            w(0) := e_in.write_cr_enable;
            x(0) := (e_in.write_enable and e_in.rc);
            y(0) := fp_in.write_cr_enable;
            assert (to_integer(unsigned(w)) + to_integer(unsigned(x)) +
                    to_integer(unsigned(y))) <= 1 severity failure;

            assert not (e_in.valid = '1' and e_in.instr_tag.valid = '0') severity failure;
            assert not (l_in.valid = '1' and l_in.instr_tag.valid = '0') severity failure;
            assert not (fp_in.valid = '1' and fp_in.instr_tag.valid = '0') severity failure;
        end if;
    end process;

    writeback_1: process(all)
        variable v    : reg_type;
        variable f    : WritebackToFetch1Type;
        variable cf: std_ulogic_vector(3 downto 0);
        variable zero : std_ulogic;
        variable sign : std_ulogic;
        variable scf  : std_ulogic_vector(3 downto 0);
        variable vec  : integer range 0 to 16#fff#;
        variable srr1 : std_ulogic_vector(15 downto 0);
        variable intr : std_ulogic;
    begin
        w_out <= WritebackToRegisterFileInit;
        c_out <= WritebackToCrFileInit;
        f := WritebackToFetch1Init;
        interrupt_out <= '0';
        vec := 0;
        v := r;

        complete_out <= instr_tag_init;
        if e_in.valid = '1' then
            complete_out <= e_in.instr_tag;
        elsif l_in.valid = '1' then
            complete_out <= l_in.instr_tag;
        elsif fp_in.valid = '1' then
            complete_out <= fp_in.instr_tag;
        end if;

        intr := e_in.interrupt or l_in.interrupt or fp_in.interrupt;

        if r.state = WRITE_SRR1 then
            w_out.write_reg <= fast_spr_num(SPR_SRR1);
            w_out.write_data <= r.srr1;
            w_out.write_enable <= '1';
            interrupt_out <= '1';
            v.state := WRITE_SRR0;

        elsif intr = '1' then
            w_out.write_reg <= fast_spr_num(SPR_SRR0);
            w_out.write_enable <= '1';
            v.state := WRITE_SRR1;
            srr1 := (others => '0');
            if e_in.interrupt = '1' then
                vec := e_in.intr_vec;
                w_out.write_data <= e_in.last_nia;
                srr1 := e_in.srr1;
            elsif l_in.interrupt = '1' then
                vec := l_in.intr_vec;
                w_out.write_data <= l_in.srr0;
                srr1 := l_in.srr1;
            elsif fp_in.interrupt = '1' then
                vec := fp_in.intr_vec;
                w_out.write_data <= fp_in.srr0;
                srr1 := fp_in.srr1;
            end if;
            v.srr1(63 downto 31) := e_in.msr(63 downto 31);
            v.srr1(30 downto 27) := srr1(14 downto 11);
            v.srr1(26 downto 22) := e_in.msr(26 downto 22);
            v.srr1(21 downto 16) := srr1(5 downto 0);
            v.srr1(15 downto 0) := e_in.msr(15 downto 0);

        else
            if e_in.write_enable = '1' then
                w_out.write_reg <= e_in.write_reg;
                w_out.write_data <= e_in.write_data;
                w_out.write_enable <= '1';
            end if;

            if e_in.write_cr_enable = '1' then
                c_out.write_cr_enable <= '1';
                c_out.write_cr_mask <= e_in.write_cr_mask;
                c_out.write_cr_data <= e_in.write_cr_data;
            end if;

            if e_in.write_xerc_enable = '1' then
                c_out.write_xerc_enable <= '1';
                c_out.write_xerc_data <= e_in.xerc;
            end if;

            if fp_in.write_enable = '1' then
                w_out.write_reg <= fp_in.write_reg;
                w_out.write_data <= fp_in.write_data;
                w_out.write_enable <= '1';
            end if;

            if fp_in.write_cr_enable = '1' then
                c_out.write_cr_enable <= '1';
                c_out.write_cr_mask <= fp_in.write_cr_mask;
                c_out.write_cr_data <= fp_in.write_cr_data;
            end if;

            if l_in.write_enable = '1' then
                w_out.write_reg <= l_in.write_reg;
                w_out.write_data <= l_in.write_data;
                w_out.write_enable <= '1';
            end if;

            if l_in.rc = '1' then
                -- st*cx. instructions
                scf(3) := '0';
                scf(2) := '0';
                scf(1) := l_in.store_done;
                scf(0) := l_in.xerc.so;
                c_out.write_cr_enable <= '1';
                c_out.write_cr_mask <= num_to_fxm(0);
                c_out.write_cr_data(31 downto 28) <= scf;
            end if;

            -- Perform CR0 update for RC forms
            -- Note that loads never have a form with an RC bit, therefore this can test e_in.write_data
            if e_in.rc = '1' and e_in.write_enable = '1' then
                zero := not (or e_in.write_data(31 downto 0));
                if e_in.mode_32bit = '0' then
                    sign := e_in.write_data(63);
                    zero := zero and not (or e_in.write_data(63 downto 32));
                else
                    sign := e_in.write_data(31);
                end if;
                c_out.write_cr_enable <= '1';
                c_out.write_cr_mask <= num_to_fxm(0);
                cf(3) := sign;
                cf(2) := not sign and not zero;
                cf(1) := zero;
                cf(0) := e_in.xerc.so;
                c_out.write_cr_data(31 downto 28) <= cf;
            end if;
        end if;

        -- Outputs to fetch1
        f.redirect := e_in.redirect;
        f.br_nia := e_in.last_nia;
        f.br_last := e_in.br_last;
        f.br_taken := e_in.br_taken;
        if intr = '1' then
            f.redirect := '1';
            f.br_last := '0';
            f.redirect_nia := std_ulogic_vector(to_unsigned(vec, 64));
            f.virt_mode := '0';
            f.priv_mode := '1';
            -- XXX need an interrupt LE bit here, e.g. from LPCR
            f.big_endian := '0';
            f.mode_32bit := '0';
        else
            if e_in.abs_br = '1' then
                f.redirect_nia := e_in.br_offset;
            else
                f.redirect_nia := std_ulogic_vector(unsigned(e_in.last_nia) + unsigned(e_in.br_offset));
            end if;
            -- send MSR[IR], ~MSR[PR], ~MSR[LE] and ~MSR[SF] up to fetch1
            f.virt_mode := e_in.redir_mode(3);
            f.priv_mode := e_in.redir_mode(2);
            f.big_endian := e_in.redir_mode(1);
            f.mode_32bit := e_in.redir_mode(0);
        end if;

        f_out <= f;
        flush_out <= f_out.redirect;

        rin <= v;
    end process;
end;