master
openpowerwtf 2 years ago
parent c309e9145c
commit 74e18b6933

@ -139,6 +139,6 @@ module tri_aoi22_nlats_wlcb (

assign scout = ZEROS;

assign unused = d_mode | sg | delay_lclkr | mpw1_b | mpw2_b | vd | gd | (|scin);
assign unused = d_mode | sg | delay_lclkr | mpw1_b | mpw2_b (|scin);
endgenerate
endmodule

@ -48,10 +48,5 @@ module tri_direct_err_rpt(

// tri_direct_err_rpt

(* analysis_not_referenced="true" *)
wire unused;

assign unused = vd | gd;

assign err_out = err_in;
endmodule

@ -116,7 +116,7 @@ module tri_inv_nlats(
assign qb = (~int_dout);
assign scanout = ZEROS;

assign unused = | {vd, gd, scanin};
assign unused = | {scanin};
end
endgenerate
endmodule

@ -81,5 +81,5 @@ module tri_lcbcntl_array_mac (
assign mpw2_dc_b = 1'b1;
assign scan_out = 1'b0;

assign unused = vdd | gnd | sg | scan_in | scan_diag_dc | thold;
assign unused = sg | scan_in | scan_diag_dc | thold;
endmodule

@ -81,5 +81,5 @@ module tri_lcbcntl_mac (
assign mpw2_dc_b = 1'b1;
assign scan_out = 1'b0;

assign unused = vdd | gnd | sg | scan_in | scan_diag_dc | thold;
assign unused = sg | scan_in | scan_diag_dc | thold;
endmodule

@ -73,7 +73,7 @@ module tri_lcbnd (
(* analysis_not_referenced="true" *)
wire unused;

assign unused = vd | gd | delay_lclkr | mpw1_b | mpw2_b | sg;
assign unused = delay_lclkr | mpw1_b | mpw2_b | sg;

assign gate_b = force_t | act;


@ -1,69 +0,0 @@
// © IBM Corp. 2022
// Licensed under the Apache License, Version 2.0 (the "License"), as modified by
// the terms below; you may not use the files in this repository except in
// compliance with the License as modified.
// You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0
//
// Modified Terms:
//
// 1) For the purpose of the patent license granted to you in Section 3 of the
// License, the "Work" hereby includes implementations of the work of authorship
// in physical form.
//
// 2) Notwithstanding any terms to the contrary in the License, any licenses
// necessary for implementation of the Work that are available from OpenPOWER
// via the Power ISA End User License Agreement (EULA) are explicitly excluded
// hereunder, and may be obtained from OpenPOWER under the terms and conditions
// of the EULA.
//
// Unless required by applicable law or agreed to in writing, the reference design
// distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
// WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
// for the specific language governing permissions and limitations under the License.
//
// Additional rights, including the ability to physically implement a softcore that
// is compliant with the required sections of the Power ISA Specification, are
// available at no cost under the terms of the OpenPOWER Power ISA EULA, which can be
// obtained (along with the Power ISA) here: https://openpowerfoundation.org.

`timescale 1 ns / 1 ns

// *!****************************************************************
// *! FILENAME : tri_lcbs.v
// *! DESCRIPTION : Wrapper for slat LCB
// *!****************************************************************

`include "tri_a2o.vh"

module tri_lcbs (
vd,
gd,
delay_lclkr,
clk,
rst,
force_t,
thold_b,
dclk,
lclk
);
inout vd;
inout gd;
input delay_lclkr;
input clk;
input rst;
input force_t;
input thold_b;
output dclk;
output[0:`NCLK_WIDTH-1] lclk;

// tri_lcbs

(* analysis_not_referenced="true" *)
wire unused;

assign unused = vd | gd | delay_lclkr | force_t;

// No scan chain in this methodology
assign dclk = thold_b;
assign lclk = {clk, rst, {`NCLK_WIDTH-2{1'b0}}};
endmodule

@ -116,6 +116,6 @@ module tri_nand2_nlats(
assign qb = (~int_dout);
assign scanout = ZEROS;

assign unused = | {vd, gd, scanin};
assign unused = | {scanin};
endgenerate
endmodule

@ -118,7 +118,7 @@ module tri_nlat(
assign q_b = (~int_dout);
assign scan_out = 1'b0;

assign unused = | {vd, gd, scan_in};
assign unused = | {scan_in};
end
endgenerate
endmodule

@ -117,7 +117,7 @@ module tri_nlat_scan(
assign q_b = (~int_dout);
assign scan_out = ZEROS;

assign unused = | {vd, gd, scan_in};
assign unused = | {scan_in};
end
endgenerate
endmodule

@ -52,11 +52,6 @@ module tri_plat (vd, gd, clk, rst, flush, din, q);
// tri_plat
reg [OFFSET:OFFSET+WIDTH-1] int_dout;

(* analysis_not_referenced="true" *)
wire unused;
assign unused = | {vd, gd};


always @ (posedge clk)
begin
int_dout <= din;

@ -100,7 +100,7 @@ module tri_regk (

assign scout = {WIDTH{1'b0}};

assign unused = | {vd, gd, d_mode, sg, delay_lclkr, mpw1_b, mpw2_b, scin};
assign unused = | {d_mode, sg, delay_lclkr, mpw1_b, mpw2_b, scin};

endgenerate


@ -86,7 +86,7 @@ module tri_regs (

assign scout = {WIDTH{1'b0}};

assign unused = |{vd, gd, delay_lclkr, scin};
assign unused = | {delay_lclkr, scin};

endgenerate


@ -85,7 +85,7 @@ module tri_rlmlatch_p (vd, gd, clk, rst, act, force_t, thold_b, d_mode, sg, dela

assign scout = 0;

assign unused = d_mode | sg | delay_lclkr | mpw1_b | mpw2_b | scin | vd | gd;
assign unused = d_mode | sg | delay_lclkr | mpw1_b | mpw2_b | scin;

endgenerate
endmodule

@ -92,7 +92,7 @@ module tri_rlmreg_p (vd, gd, clk, rst, act, force_t, thold_b, d_mode, sg, delay_

assign scout = {WIDTH{1'b0}};

assign unused[0] = d_mode | sg | delay_lclkr | mpw1_b | mpw2_b | vd | gd;
assign unused[0] = d_mode | sg | delay_lclkr | mpw1_b | mpw2_b;
assign unused[1:WIDTH] = scin;

endgenerate

@ -81,13 +81,6 @@ module tri_scom_addr_decode(
//=====================================================================
wire [0:ADDR_SIZE-1] address;


// Don't reference unused inputs:
(* analysis_not_referenced="true" *)
wire unused;
assign unused = vd | gd;


//=====================================================================
generate
begin : decode_it

@ -71,7 +71,7 @@ module tri_slat_scan(
(* analysis_not_referenced="true" *)
wire unused;

assign unused = | {vd, gd, dclk, lclk, scan_in};
assign unused = | {dclk, lclk, scan_in};

assign scan_out = ZEROS;
assign q = initv;

@ -666,8 +666,8 @@ module xu(
// Power signals
wire vdd;
wire gnd;
assign vdd = 1'b1;
assign gnd = 1'b0;
//assign vdd = 1'b1;
//assign gnd = 1'b0;

localparam AXU_TARGET_ENC = `AXU_SPARE_ENC + `GPR_POOL_ENC + `THREADS_POOL_ENC;


Loading…
Cancel
Save