You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
microwatt/decode2.vhdl

705 lines
26 KiB
VHDL

library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
library work;
use work.decode_types.all;
use work.common.all;
use work.helpers.all;
use work.insn_helpers.all;
entity decode2 is
generic (
EX1_BYPASS : boolean := true;
HAS_FPU : boolean := true;
-- Non-zero to enable log data collection
LOG_LENGTH : natural := 0
);
port (
clk : in std_ulogic;
rst : in std_ulogic;
complete_in : in instr_tag_t;
busy_in : in std_ulogic;
stall_out : out std_ulogic;
stopped_out : out std_ulogic;
flush_in: in std_ulogic;
d_in : in Decode1ToDecode2Type;
e_out : out Decode2ToExecute1Type;
r_in : in RegisterFileToDecode2Type;
r_out : out Decode2ToRegisterFileType;
c_in : in CrFileToDecode2Type;
c_out : out Decode2ToCrFileType;
execute_bypass : in bypass_data_t;
execute_cr_bypass : in cr_bypass_data_t;
execute2_bypass : in bypass_data_t;
execute2_cr_bypass : in cr_bypass_data_t;
writeback_bypass : in bypass_data_t;
-- Access to SPRs from core_debug module
dbg_spr_req : in std_ulogic;
dbg_spr_addr : in std_ulogic_vector(7 downto 0);
log_out : out std_ulogic_vector(9 downto 0)
);
end entity decode2;
architecture behaviour of decode2 is
type reg_type is record
e : Decode2ToExecute1Type;
repeat : repeat_t;
busy : std_ulogic;
sgl_pipe : std_ulogic;
prev_sgl : std_ulogic;
reg_a_valid : std_ulogic;
reg_b_valid : std_ulogic;
reg_c_valid : std_ulogic;
reg_o_valid : std_ulogic;
input_ov : std_ulogic;
output_ov : std_ulogic;
read_rspr : std_ulogic;
end record;
constant reg_type_init : reg_type :=
(e => Decode2ToExecute1Init, repeat => NONE, others => '0');
signal dc2, dc2in : reg_type;
signal deferred : std_ulogic;
type decode_input_reg_t is record
reg_valid : std_ulogic;
reg : gspr_index_t;
data : std_ulogic_vector(63 downto 0);
end record;
constant decode_input_reg_init : decode_input_reg_t := ('0', (others => '0'), (others => '0'));
type decode_output_reg_t is record
reg_valid : std_ulogic;
reg : gspr_index_t;
end record;
constant decode_output_reg_init : decode_output_reg_t := ('0', (others => '0'));
function decode_input_reg_a (t : input_reg_a_t; insn_in : std_ulogic_vector(31 downto 0);
instr_addr : std_ulogic_vector(63 downto 0))
return decode_input_reg_t is
begin
if t = RA or (t = RA_OR_ZERO and insn_ra(insn_in) /= "00000") then
return ('1', gpr_to_gspr(insn_ra(insn_in)), (others => '0'));
elsif t = CIA then
return ('0', (others => '0'), instr_addr);
elsif HAS_FPU and t = FRA then
return ('1', fpr_to_gspr(insn_fra(insn_in)), (others => '0'));
else
return ('0', (others => '0'), (others => '0'));
end if;
end;
function decode_input_reg_b (t : input_reg_b_t; insn_in : std_ulogic_vector(31 downto 0))
return decode_input_reg_t is
variable ret : decode_input_reg_t;
begin
case t is
when RB =>
ret := ('1', gpr_to_gspr(insn_rb(insn_in)), (others => '0'));
when FRB =>
if HAS_FPU then
ret := ('1', fpr_to_gspr(insn_frb(insn_in)), (others => '0'));
else
ret := ('0', (others => '0'), (others => '0'));
end if;
when CONST_UI =>
ret := ('0', (others => '0'), std_ulogic_vector(resize(unsigned(insn_ui(insn_in)), 64)));
when CONST_SI =>
ret := ('0', (others => '0'), std_ulogic_vector(resize(signed(insn_si(insn_in)), 64)));
when CONST_SI_HI =>
ret := ('0', (others => '0'), std_ulogic_vector(resize(signed(insn_si(insn_in)) & x"0000", 64)));
when CONST_UI_HI =>
ret := ('0', (others => '0'), std_ulogic_vector(resize(unsigned(insn_si(insn_in)) & x"0000", 64)));
when CONST_LI =>
ret := ('0', (others => '0'), std_ulogic_vector(resize(signed(insn_li(insn_in)) & "00", 64)));
when CONST_BD =>
ret := ('0', (others => '0'), std_ulogic_vector(resize(signed(insn_bd(insn_in)) & "00", 64)));
when CONST_DS =>
ret := ('0', (others => '0'), std_ulogic_vector(resize(signed(insn_ds(insn_in)) & "00", 64)));
core: Implement quadword loads and stores This implements the lq, stq, lqarx and stqcx. instructions. These instructions all access two consecutive GPRs; for example the "lq %r6,0(%r3)" instruction will load the doubleword at the address in R3 into R7 and the doubleword at address R3 + 8 into R6. To cope with having two GPR sources or destinations, the instruction gets repeated at the decode2 stage, that is, for each lq/stq/lqarx/stqcx. coming in from decode1, two instructions get sent out to execute1. For these instructions, the RS or RT register gets modified on one of the iterations by setting the LSB of the register number. In LE mode, the first iteration uses RS|1 or RT|1 and the second iteration uses RS or RT. In BE mode, this is done the other way around. In order for decode2 to know what endianness is currently in use, we pass the big_endian flag down from icache through decode1 to decode2. This is always in sync with what execute1 is using because only rfid or an interrupt can change MSR[LE], and those operations all cause a flush and redirect. There is now an extra column in the decode tables in decode1 to indicate whether the instruction needs to be repeated. Decode1 also enforces the rule that lq with RT = RT and lqarx with RA = RT or RB = RT are illegal. Decode2 now passes a 'repeat' flag and a 'second' flag to execute1, and execute1 passes them on to loadstore1. The 'repeat' flag is set for both iterations of a repeated instruction, and 'second' is set on the second iteration. Execute1 does not take asynchronous or trace interrupts on the second iteration of a repeated instruction. Loadstore1 uses 'next_addr' for the second iteration of a repeated load/store so that we access the second doubleword of the memory operand. Thus loadstore1 accesses the doublewords in increasing memory order. For 16-byte loads this means that the first iteration writes GPR RT|1. It is possible that RA = RT|1 (this is a legal but non-preferred form), meaning that if the memory operand was misaligned, the first iteration would overwrite RA but then the second iteration might take a page fault, leading to corrupted state. To avoid that possibility, 16-byte loads in LE mode take an alignment interrupt if the operand is not 16-byte aligned. (This is the case anyway for lqarx, and we enforce it for lq as well.) Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
when CONST_DQ =>
ret := ('0', (others => '0'), std_ulogic_vector(resize(signed(insn_dq(insn_in)) & "0000", 64)));
when CONST_DXHI4 =>
ret := ('0', (others => '0'), std_ulogic_vector(resize(signed(insn_dx(insn_in)) & x"0004", 64)));
when CONST_M1 =>
ret := ('0', (others => '0'), x"FFFFFFFFFFFFFFFF");
when CONST_SH =>
ret := ('0', (others => '0'), x"00000000000000" & "00" & insn_in(1) & insn_in(15 downto 11));
when CONST_SH32 =>
ret := ('0', (others => '0'), x"00000000000000" & "000" & insn_in(15 downto 11));
when NONE =>
ret := ('0', (others => '0'), (others => '0'));
end case;
return ret;
end;
function decode_input_reg_c (t : input_reg_c_t; insn_in : std_ulogic_vector(31 downto 0))
return decode_input_reg_t is
begin
case t is
when RS =>
return ('1', gpr_to_gspr(insn_rs(insn_in)), (others => '0'));
when RCR =>
return ('1', gpr_to_gspr(insn_rcreg(insn_in)), (others => '0'));
when FRS =>
if HAS_FPU then
return ('1', fpr_to_gspr(insn_frt(insn_in)), (others => '0'));
else
return ('0', (others => '0'), (others => '0'));
end if;
when FRC =>
if HAS_FPU then
return ('1', fpr_to_gspr(insn_frc(insn_in)), (others => '0'));
else
return ('0', (others => '0'), (others => '0'));
end if;
when NONE =>
return ('0', (others => '0'), (others => '0'));
end case;
end;
function decode_output_reg (t : output_reg_a_t; insn_in : std_ulogic_vector(31 downto 0))
return decode_output_reg_t is
begin
case t is
when RT =>
return ('1', gpr_to_gspr(insn_rt(insn_in)));
when RA =>
return ('1', gpr_to_gspr(insn_ra(insn_in)));
when FRT =>
if HAS_FPU then
return ('1', fpr_to_gspr(insn_frt(insn_in)));
else
return ('0', "000000");
end if;
when NONE =>
return ('0', "000000");
end case;
end;
function decode_rc (t : rc_t; insn_in : std_ulogic_vector(31 downto 0)) return std_ulogic is
begin
case t is
when RC =>
return insn_rc(insn_in);
when ONE =>
return '1';
when NONE =>
return '0';
end case;
end;
-- control signals that are derived from insn_type
type mux_select_array_t is array(insn_type_t) of std_ulogic_vector(2 downto 0);
constant result_select : mux_select_array_t := (
OP_AND => "001", -- logical_result
OP_OR => "001",
OP_XOR => "001",
OP_PRTY => "001",
OP_CMPB => "001",
OP_EXTS => "001",
OP_BPERM => "001",
OP_BCD => "001",
OP_MTSPR => "001",
OP_RLC => "010", -- rotator_result
OP_RLCL => "010",
OP_RLCR => "010",
OP_SHL => "010",
OP_SHR => "010",
OP_EXTSWSLI => "010",
OP_MUL_L64 => "011", -- muldiv_result
OP_B => "110", -- next_nia
OP_BC => "110",
OP_BCREG => "110",
OP_ADDG6S => "111", -- misc_result
OP_ISEL => "111",
OP_DARN => "111",
OP_MFMSR => "111",
OP_MFCR => "111",
OP_SETB => "111",
others => "000" -- default to adder_result
);
constant subresult_select : mux_select_array_t := (
OP_MUL_L64 => "000", -- muldiv_result
OP_MUL_H64 => "001",
OP_MUL_H32 => "010",
OP_DIV => "011",
OP_DIVE => "011",
OP_MOD => "011",
OP_ADDG6S => "001", -- misc_result
OP_ISEL => "010",
OP_DARN => "011",
OP_MFMSR => "100",
OP_MFCR => "101",
OP_SETB => "110",
OP_CMP => "000", -- cr_result
OP_CMPRB => "001",
OP_CMPEQB => "010",
OP_CROP => "011",
OP_MCRXRX => "100",
OP_MTCRF => "101",
others => "000"
);
signal decoded_reg_a : decode_input_reg_t;
signal decoded_reg_b : decode_input_reg_t;
signal decoded_reg_c : decode_input_reg_t;
signal decoded_reg_o : decode_output_reg_t;
-- issue control signals
signal control_valid_in : std_ulogic;
signal control_valid_out : std_ulogic;
signal control_serialize : std_logic;
signal gpr_write_valid : std_ulogic;
signal gpr_write : gspr_index_t;
signal gpr_a_read_valid : std_ulogic;
signal gpr_a_read : gspr_index_t;
signal gpr_a_bypass : std_ulogic_vector(1 downto 0);
signal gpr_b_read_valid : std_ulogic;
signal gpr_b_read : gspr_index_t;
signal gpr_b_bypass : std_ulogic_vector(1 downto 0);
signal gpr_c_read_valid : std_ulogic;
signal gpr_c_read : gspr_index_t;
signal gpr_c_bypass : std_ulogic_vector(1 downto 0);
signal cr_read_valid : std_ulogic;
signal cr_write_valid : std_ulogic;
signal cr_bypass : std_ulogic_vector(1 downto 0);
signal ov_read_valid : std_ulogic;
signal ov_write_valid : std_ulogic;
signal instr_tag : instr_tag_t;
begin
control_0: entity work.control
generic map (
EX1_BYPASS => EX1_BYPASS
)
port map (
clk => clk,
rst => rst,
complete_in => complete_in,
valid_in => control_valid_in,
deferred => deferred,
flush_in => flush_in,
serialize => control_serialize,
stop_mark_in => d_in.stop_mark,
gpr_write_valid_in => gpr_write_valid,
gpr_write_in => gpr_write,
gpr_a_read_valid_in => gpr_a_read_valid,
gpr_a_read_in => gpr_a_read,
gpr_b_read_valid_in => gpr_b_read_valid,
gpr_b_read_in => gpr_b_read,
gpr_c_read_valid_in => gpr_c_read_valid,
gpr_c_read_in => gpr_c_read,
execute_next_tag => execute_bypass.tag,
execute_next_cr_tag => execute_cr_bypass.tag,
execute2_next_tag => execute2_bypass.tag,
execute2_next_cr_tag => execute2_cr_bypass.tag,
cr_read_in => cr_read_valid,
cr_write_in => cr_write_valid,
cr_bypass => cr_bypass,
ov_read_in => ov_read_valid,
ov_write_in => ov_write_valid,
valid_out => control_valid_out,
stopped_out => stopped_out,
gpr_bypass_a => gpr_a_bypass,
gpr_bypass_b => gpr_b_bypass,
gpr_bypass_c => gpr_c_bypass,
instr_tag_out => instr_tag
);
deferred <= dc2.e.valid and busy_in;
decode2_0: process(clk)
begin
if rising_edge(clk) then
if rst = '1' or flush_in = '1' then
dc2 <= reg_type_init;
elsif deferred = '0' then
if dc2in.e.valid = '1' then
report "execute " & to_hstring(dc2in.e.nia) &
" tag=" & integer'image(dc2in.e.instr_tag.tag) & std_ulogic'image(dc2in.e.instr_tag.valid);
end if;
dc2 <= dc2in;
elsif dc2.read_rspr = '0' then
-- Update debug SPR access signals even when stalled
-- if the instruction in dc2.e doesn't read any SPRs.
dc2.e.dbg_spr_access <= dc2in.e.dbg_spr_access;
dc2.e.ramspr_even_rdaddr <= dc2in.e.ramspr_even_rdaddr;
dc2.e.ramspr_odd_rdaddr <= dc2in.e.ramspr_odd_rdaddr;
dc2.e.ramspr_rd_odd <= dc2in.e.ramspr_rd_odd;
end if;
if d_in.valid = '1' then
assert decoded_reg_a.reg_valid = '0' or decoded_reg_a.reg = d_in.reg_a severity failure;
assert decoded_reg_b.reg_valid = '0' or decoded_reg_b.reg = d_in.reg_b severity failure;
assert decoded_reg_c.reg_valid = '0' or decoded_reg_c.reg = d_in.reg_c severity failure;
end if;
end if;
end process;
c_out.read <= d_in.decode.input_cr;
decode2_addrs: process(all)
begin
decoded_reg_a <= decode_input_reg_init;
decoded_reg_b <= decode_input_reg_init;
decoded_reg_c <= decode_input_reg_init;
decoded_reg_o <= decode_output_reg_init;
if d_in.valid = '1' then
decoded_reg_a <= decode_input_reg_a (d_in.decode.input_reg_a, d_in.insn, d_in.nia);
decoded_reg_b <= decode_input_reg_b (d_in.decode.input_reg_b, d_in.insn);
decoded_reg_c <= decode_input_reg_c (d_in.decode.input_reg_c, d_in.insn);
decoded_reg_o <= decode_output_reg (d_in.decode.output_reg_a, d_in.insn);
end if;
r_out.read1_enable <= decoded_reg_a.reg_valid;
r_out.read2_enable <= decoded_reg_b.reg_valid;
r_out.read3_enable <= decoded_reg_c.reg_valid;
end process;
decode2_1: process(all)
variable v : reg_type;
variable length : std_ulogic_vector(3 downto 0);
variable op : insn_type_t;
variable valid_in : std_ulogic;
variable decctr : std_ulogic;
variable sprs_busy : std_ulogic;
begin
v := dc2;
valid_in := d_in.valid or dc2.busy;
if dc2.busy = '0' then
v.e := Decode2ToExecute1Init;
sprs_busy := '0';
if d_in.valid = '1' then
v.prev_sgl := dc2.sgl_pipe;
v.sgl_pipe := d_in.decode.sgl_pipe;
end if;
v.e.input_cr := d_in.decode.input_cr;
v.e.output_cr := d_in.decode.output_cr;
-- Work out whether XER SO/OV/OV32 bits are set
-- or used by this instruction
v.e.rc := decode_rc(d_in.decode.rc, d_in.insn);
v.e.output_xer := d_in.decode.output_carry;
v.input_ov := d_in.decode.output_carry;
v.output_ov := '0';
if d_in.decode.input_carry = OV then
v.input_ov := '1';
v.output_ov := '1';
end if;
if v.e.rc = '1' and d_in.decode.facility /= FPU then
v.input_ov := '1';
end if;
case d_in.decode.insn_type is
when OP_ADD | OP_MUL_L64 | OP_DIV | OP_DIVE =>
-- OE field is valid in OP_ADD/OP_MUL_L64 with major opcode 31 only
if d_in.insn(31 downto 26) = "011111" and insn_oe(d_in.insn) = '1' then
v.e.oe := '1';
v.e.output_xer := '1';
v.output_ov := '1';
v.input_ov := '1'; -- need SO state if setting OV to 0
end if;
when OP_MFSPR =>
if decode_spr_num(d_in.insn) = SPR_XER then
v.input_ov := '1';
end if;
when OP_MTSPR =>
if decode_spr_num(d_in.insn) = SPR_XER then
v.e.output_xer := '1';
v.output_ov := '1';
end if;
when OP_CMP | OP_MCRXRX =>
v.input_ov := '1';
core: Implement quadword loads and stores This implements the lq, stq, lqarx and stqcx. instructions. These instructions all access two consecutive GPRs; for example the "lq %r6,0(%r3)" instruction will load the doubleword at the address in R3 into R7 and the doubleword at address R3 + 8 into R6. To cope with having two GPR sources or destinations, the instruction gets repeated at the decode2 stage, that is, for each lq/stq/lqarx/stqcx. coming in from decode1, two instructions get sent out to execute1. For these instructions, the RS or RT register gets modified on one of the iterations by setting the LSB of the register number. In LE mode, the first iteration uses RS|1 or RT|1 and the second iteration uses RS or RT. In BE mode, this is done the other way around. In order for decode2 to know what endianness is currently in use, we pass the big_endian flag down from icache through decode1 to decode2. This is always in sync with what execute1 is using because only rfid or an interrupt can change MSR[LE], and those operations all cause a flush and redirect. There is now an extra column in the decode tables in decode1 to indicate whether the instruction needs to be repeated. Decode1 also enforces the rule that lq with RT = RT and lqarx with RA = RT or RB = RT are illegal. Decode2 now passes a 'repeat' flag and a 'second' flag to execute1, and execute1 passes them on to loadstore1. The 'repeat' flag is set for both iterations of a repeated instruction, and 'second' is set on the second iteration. Execute1 does not take asynchronous or trace interrupts on the second iteration of a repeated instruction. Loadstore1 uses 'next_addr' for the second iteration of a repeated load/store so that we access the second doubleword of the memory operand. Thus loadstore1 accesses the doublewords in increasing memory order. For 16-byte loads this means that the first iteration writes GPR RT|1. It is possible that RA = RT|1 (this is a legal but non-preferred form), meaning that if the memory operand was misaligned, the first iteration would overwrite RA but then the second iteration might take a page fault, leading to corrupted state. To avoid that possibility, 16-byte loads in LE mode take an alignment interrupt if the operand is not 16-byte aligned. (This is the case anyway for lqarx, and we enforce it for lq as well.) Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
when others =>
end case;
v.reg_a_valid := decoded_reg_a.reg_valid;
v.reg_b_valid := decoded_reg_b.reg_valid;
v.reg_c_valid := decoded_reg_c.reg_valid;
v.reg_o_valid := decoded_reg_o.reg_valid;
if d_in.decode.lr = '1' then
v.e.lr := insn_lk(d_in.insn);
-- b and bc have even major opcodes; bcreg is considered absolute
v.e.br_abs := insn_aa(d_in.insn) or d_in.insn(26);
end if;
op := d_in.decode.insn_type;
-- Does this instruction decrement CTR?
-- bc, bclr, bctar with BO(2) = 0 do, but not bcctr.
decctr := '0';
if d_in.insn(23) = '0' and
(op = OP_BC or
(op = OP_BCREG and not (d_in.insn(10) = '1' and d_in.insn(6) = '0'))) then
decctr := '1';
end if;
v.e.dec_ctr := decctr;
v.repeat := d_in.decode.repeat;
if d_in.decode.repeat /= NONE then
v.e.repeat := '1';
end if;
v.e.spr_select := d_in.spr_info;
if decctr = '1' then
-- read and write CTR
v.e.ramspr_odd_rdaddr := RAMSPR_CTR;
v.e.ramspr_wraddr := RAMSPR_CTR;
v.e.ramspr_write_odd := '1';
sprs_busy := '1';
end if;
if v.e.lr = '1' then
-- write LR
v.e.ramspr_wraddr := RAMSPR_LR;
v.e.ramspr_write_even := '1';
end if;
case op is
when OP_BCREG =>
if d_in.insn(10) = '0' then
v.e.ramspr_even_rdaddr := RAMSPR_LR;
elsif d_in.insn(6) = '0' then
v.e.ramspr_odd_rdaddr := RAMSPR_CTR;
v.e.ramspr_rd_odd := '1';
else
v.e.ramspr_even_rdaddr := RAMSPR_TAR;
end if;
sprs_busy := '1';
when OP_MFSPR =>
v.e.ramspr_even_rdaddr := d_in.ram_spr.index;
v.e.ramspr_odd_rdaddr := d_in.ram_spr.index;
v.e.ramspr_rd_odd := d_in.ram_spr.isodd;
v.e.spr_is_ram := d_in.ram_spr.valid;
sprs_busy := d_in.ram_spr.valid;
when OP_MTSPR =>
v.e.ramspr_wraddr := d_in.ram_spr.index;
v.e.ramspr_write_even := d_in.ram_spr.valid and not d_in.ram_spr.isodd;
v.e.ramspr_write_odd := d_in.ram_spr.valid and d_in.ram_spr.isodd;
v.e.spr_is_ram := d_in.ram_spr.valid;
when OP_RFID =>
v.e.ramspr_even_rdaddr := RAMSPR_SRR0;
v.e.ramspr_odd_rdaddr := RAMSPR_SRR1;
sprs_busy := '1';
when others =>
end case;
v.read_rspr := sprs_busy and d_in.valid;
case d_in.decode.length is
when is1B =>
length := "0001";
when is2B =>
length := "0010";
when is4B =>
length := "0100";
when is8B =>
length := "1000";
when NONE =>
length := "0000";
end case;
-- execute unit
v.e.nia := d_in.nia;
v.e.unit := d_in.decode.unit;
v.e.fac := d_in.decode.facility;
v.e.read_reg1 := d_in.reg_a;
v.e.read_reg2 := d_in.reg_b;
v.e.read_reg3 := d_in.reg_c;
v.e.write_reg := decoded_reg_o.reg;
v.e.write_reg_enable := decoded_reg_o.reg_valid;
v.e.invert_a := d_in.decode.invert_a;
v.e.insn_type := op;
v.e.invert_out := d_in.decode.invert_out;
v.e.input_carry := d_in.decode.input_carry;
v.e.output_carry := d_in.decode.output_carry;
v.e.is_32bit := d_in.decode.is_32bit;
v.e.is_signed := d_in.decode.is_signed;
v.e.insn := d_in.insn;
v.e.data_len := length;
v.e.byte_reverse := d_in.decode.byte_reverse;
v.e.sign_extend := d_in.decode.sign_extend;
v.e.update := d_in.decode.update;
v.e.reserve := d_in.decode.reserve;
v.e.br_pred := d_in.br_pred;
v.e.result_sel := result_select(op);
v.e.sub_select := subresult_select(op);
if op = OP_MFSPR then
if d_in.ram_spr.valid = '1' then
v.e.result_sel := "101"; -- ramspr_result
elsif d_in.spr_info.valid = '0' then
-- Privileged mfspr to invalid/unimplemented SPR numbers
-- writes the contents of RT back to RT (i.e. it's a no-op)
v.e.result_sel := "001"; -- logical_result
end if;
end if;
elsif dc2.e.valid = '1' then
-- dc2.busy = 1 and dc2.e.valid = 1, thus this must be a repeated instruction.
-- Set up for the second iteration (if deferred = 1 this will all be ignored)
v.e.second := '1';
-- DUPD is the only possibility here:
-- update-form loads, 2nd instruction writes RA
v.e.write_reg := dc2.e.read_reg1;
end if;
-- issue control
control_valid_in <= valid_in;
control_serialize <= v.sgl_pipe or v.prev_sgl;
gpr_write_valid <= v.reg_o_valid;
gpr_write <= v.e.write_reg;
gpr_a_read_valid <= v.reg_a_valid;
gpr_a_read <= v.e.read_reg1;
gpr_b_read_valid <= v.reg_b_valid;
gpr_b_read <= v.e.read_reg2;
gpr_c_read_valid <= v.reg_c_valid;
gpr_c_read <= v.e.read_reg3;
cr_write_valid <= v.e.output_cr or v.e.rc;
-- Since ops that write CR only write some of the fields,
-- any op that writes CR effectively also reads it.
cr_read_valid <= cr_write_valid or v.e.input_cr;
ov_read_valid <= v.input_ov;
ov_write_valid <= v.output_ov;
-- See if any of the operands can get their value via the bypass path.
if dc2.busy = '0' or gpr_a_bypass /= "00" then
case gpr_a_bypass is
when "01" =>
v.e.read_data1 := execute_bypass.data;
when "10" =>
v.e.read_data1 := execute2_bypass.data;
when "11" =>
v.e.read_data1 := writeback_bypass.data;
when others =>
if decoded_reg_a.reg_valid = '1' then
v.e.read_data1 := r_in.read1_data;
else
v.e.read_data1 := decoded_reg_a.data;
end if;
end case;
end if;
if dc2.busy = '0' or gpr_b_bypass /= "00" then
case gpr_b_bypass is
when "01" =>
v.e.read_data2 := execute_bypass.data;
when "10" =>
v.e.read_data2 := execute2_bypass.data;
when "11" =>
v.e.read_data2 := writeback_bypass.data;
when others =>
if decoded_reg_b.reg_valid = '1' then
v.e.read_data2 := r_in.read2_data;
else
v.e.read_data2 := decoded_reg_b.data;
end if;
end case;
end if;
if dc2.busy = '0' or gpr_c_bypass /= "00" then
case gpr_c_bypass is
when "01" =>
v.e.read_data3 := execute_bypass.data;
when "10" =>
v.e.read_data3 := execute2_bypass.data;
when "11" =>
v.e.read_data3 := writeback_bypass.data;
when others =>
if decoded_reg_c.reg_valid = '1' then
v.e.read_data3 := r_in.read3_data;
else
v.e.read_data3 := decoded_reg_c.data;
end if;
end case;
core: Implement quadword loads and stores This implements the lq, stq, lqarx and stqcx. instructions. These instructions all access two consecutive GPRs; for example the "lq %r6,0(%r3)" instruction will load the doubleword at the address in R3 into R7 and the doubleword at address R3 + 8 into R6. To cope with having two GPR sources or destinations, the instruction gets repeated at the decode2 stage, that is, for each lq/stq/lqarx/stqcx. coming in from decode1, two instructions get sent out to execute1. For these instructions, the RS or RT register gets modified on one of the iterations by setting the LSB of the register number. In LE mode, the first iteration uses RS|1 or RT|1 and the second iteration uses RS or RT. In BE mode, this is done the other way around. In order for decode2 to know what endianness is currently in use, we pass the big_endian flag down from icache through decode1 to decode2. This is always in sync with what execute1 is using because only rfid or an interrupt can change MSR[LE], and those operations all cause a flush and redirect. There is now an extra column in the decode tables in decode1 to indicate whether the instruction needs to be repeated. Decode1 also enforces the rule that lq with RT = RT and lqarx with RA = RT or RB = RT are illegal. Decode2 now passes a 'repeat' flag and a 'second' flag to execute1, and execute1 passes them on to loadstore1. The 'repeat' flag is set for both iterations of a repeated instruction, and 'second' is set on the second iteration. Execute1 does not take asynchronous or trace interrupts on the second iteration of a repeated instruction. Loadstore1 uses 'next_addr' for the second iteration of a repeated load/store so that we access the second doubleword of the memory operand. Thus loadstore1 accesses the doublewords in increasing memory order. For 16-byte loads this means that the first iteration writes GPR RT|1. It is possible that RA = RT|1 (this is a legal but non-preferred form), meaning that if the memory operand was misaligned, the first iteration would overwrite RA but then the second iteration might take a page fault, leading to corrupted state. To avoid that possibility, 16-byte loads in LE mode take an alignment interrupt if the operand is not 16-byte aligned. (This is the case anyway for lqarx, and we enforce it for lq as well.) Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
4 years ago
end if;
case cr_bypass is
when "10" =>
v.e.cr := execute_cr_bypass.data;
when "11" =>
v.e.cr := execute2_cr_bypass.data;
when others =>
v.e.cr := c_in.read_cr_data;
end case;
v.e.xerc := c_in.read_xerc_data;
v.e.valid := control_valid_out;
v.e.instr_tag := instr_tag;
v.busy := valid_in and (not control_valid_out or (v.e.repeat and not v.e.second));
stall_out <= dc2.busy or deferred;
v.e.dbg_spr_access := dbg_spr_req and not v.read_rspr;
if v.e.dbg_spr_access = '1' then
v.e.ramspr_even_rdaddr := unsigned(dbg_spr_addr(3 downto 1));
v.e.ramspr_odd_rdaddr := unsigned(dbg_spr_addr(3 downto 1));
v.e.ramspr_rd_odd := dbg_spr_addr(0);
end if;
-- Update registers
dc2in <= v;
-- Update outputs
e_out <= dc2.e;
end process;
d2_log: if LOG_LENGTH > 0 generate
signal log_data : std_ulogic_vector(9 downto 0);
begin
dec2_log : process(clk)
begin
if rising_edge(clk) then
log_data <= dc2.e.nia(5 downto 2) &
dc2.e.valid &
stopped_out &
stall_out &
(gpr_a_bypass(1) xor gpr_a_bypass(0)) &
(gpr_b_bypass(1) xor gpr_b_bypass(0)) &
(gpr_c_bypass(1) xor gpr_c_bypass(0));
end if;
end process;
log_out <= log_data;
end generate;
end architecture behaviour;