Rework SOC reset

The old reset code was overly complicated and never worked properly.
Replace it with a simpler sequence that uses a couple of shift registers
to assert resets:

- Wait a number of external clock cycles before removing reset from
  the PLL.

- After the PLL locks and the external reset button isn't pressed,
  wait a number of PLL clock cycles before removing reset from the SOC.

Signed-off-by: Anton Blanchard <anton@linux.ibm.com>
pull/20/head
Anton Blanchard 5 years ago committed by Anton Blanchard
parent a53ad60014
commit 03fd06deaf

@ -2,7 +2,7 @@ GHDL=ghdl
GHDLFLAGS=--std=08 GHDLFLAGS=--std=08
CFLAGS=-O2 -Wall CFLAGS=-O2 -Wall


all = core_tb simple_ram_behavioural_tb all = core_tb simple_ram_behavioural_tb soc_reset_tb
# XXX # XXX
# loadstore_tb fetch_tb # loadstore_tb fetch_tb


@ -41,6 +41,11 @@ wishbone_arbiter.o: wishbone_types.o
wishbone_types.o: wishbone_types.o:
writeback.o: common.o writeback.o: common.o


fpga/soc_reset_tb.o: fpga/soc_reset.o

soc_reset_tb: fpga/soc_reset_tb.o fpga/soc_reset.o
$(GHDL) -e $(GHDLFLAGS) soc_reset_tb

core_tb: core_tb.o simple_ram_behavioural_helpers_c.o sim_console_c.o core_tb: core_tb.o simple_ram_behavioural_helpers_c.o sim_console_c.o
$(GHDL) -e $(GHDLFLAGS) -Wl,simple_ram_behavioural_helpers_c.o -Wl,sim_console_c.o $@ $(GHDL) -e $(GHDLFLAGS) -Wl,simple_ram_behavioural_helpers_c.o -Wl,sim_console_c.o $@



@ -3,10 +3,10 @@ use ieee.std_logic_1164.all;


entity clock_generator is entity clock_generator is
port ( port (
clk : in std_logic; ext_clk : in std_logic;
resetn : in std_logic; pll_rst_in : in std_logic;
system_clk : out std_logic; pll_clk_out : out std_logic;
locked : out std_logic); pll_locked_out : out std_logic);


end entity clock_generator; end entity clock_generator;


@ -14,7 +14,7 @@ architecture bypass of clock_generator is


begin begin


locked <= not resetn; pll_locked_out <= pll_rst_in;
system_clk <= clk; pll_clk_out <= ext_clk;


end architecture bypass; end architecture bypass;

@ -8,10 +8,10 @@ entity clock_generator is
generic ( generic (
clk_period_hz : positive := 100000000); clk_period_hz : positive := 100000000);
port ( port (
clk : in std_logic; ext_clk : in std_logic;
resetn : in std_logic; pll_rst_in : in std_logic;
system_clk : out std_logic; pll_clk_out : out std_logic;
locked : out std_logic); pll_locked_out : out std_logic);
end entity clock_generator; end entity clock_generator;


architecture rtl of clock_generator is architecture rtl of clock_generator is
@ -55,17 +55,17 @@ begin
DIVCLK_DIVIDE => pll_settings.divclk_divide, DIVCLK_DIVIDE => pll_settings.divclk_divide,
STARTUP_WAIT => "FALSE") STARTUP_WAIT => "FALSE")
port map ( port map (
CLKOUT0 => system_clk, CLKOUT0 => pll_clk_out,
CLKOUT1 => open, CLKOUT1 => open,
CLKOUT2 => open, CLKOUT2 => open,
CLKOUT3 => open, CLKOUT3 => open,
CLKOUT4 => open, CLKOUT4 => open,
CLKOUT5 => open, CLKOUT5 => open,
CLKFBOUT => clkfb, CLKFBOUT => clkfb,
LOCKED => locked, LOCKED => pll_locked_out,
CLKIN1 => clk, CLKIN1 => ext_clk,
PWRDWN => '0', PWRDWN => '0',
RST => not resetn, RST => pll_rst_in,
CLKFBIN => clkfb); CLKFBIN => clkfb);


end architecture rtl; end architecture rtl;

@ -1,69 +0,0 @@
-- The Potato Processor - A simple processor for FPGAs
-- (c) Kristian Klomsten Skordal 2018 <kristian.skordal@wafflemail.net>

library ieee;
use ieee.std_logic_1164.all;
use work.pp_utilities.all;

--! @brief System reset unit.
--! Because most resets in the processor core are synchronous, at least one
--! clock pulse has to be given to the processor while the reset signal is
--! asserted. However, if the clock generator is being reset at the same time,
--! the system clock might not run during reset, preventing the processor from
--! properly resetting.
entity pp_soc_reset is
generic(
RESET_CYCLE_COUNT : natural := 20000000
);
port(
clk : in std_logic;

reset_n : in std_logic;
reset_out : out std_logic;

system_clk : in std_logic;
system_clk_locked : in std_logic
);
end entity pp_soc_reset;

architecture behaviour of pp_soc_reset is

subtype counter_type is natural range 0 to RESET_CYCLE_COUNT;
signal counter : counter_type;

signal fast_reset : std_logic := '0';
signal slow_reset : std_logic := '1';
begin

reset_out <= slow_reset;

-- process(clk)
-- begin
-- if rising_edge(clk) then
-- if reset_n = '0' then
-- fast_reset <= '1';
-- elsif system_clk_locked = '1' then
-- if fast_reset = '1' and slow_reset = '1' then
-- fast_reset <= '0';
-- end if;
-- end if;
-- end if;
-- end process;

process(system_clk)
begin
if rising_edge(system_clk) then
if reset_n = '0' then
slow_reset <= '1';
counter <= RESET_CYCLE_COUNT;
else
if counter = 0 then
slow_reset <= '0';
else
counter <= counter - 1;
end if;
end if;
end if;
end process;

end architecture behaviour;

@ -0,0 +1,59 @@
library ieee;
use ieee.std_logic_1164.all;

entity soc_reset is
generic (
PLL_RESET_CLOCKS : integer := 32;
SOC_RESET_CLOCKS : integer := 32;
RESET_LOW : boolean := true
);
port (
ext_clk : in std_ulogic;
pll_clk : in std_ulogic;

pll_locked_in : in std_ulogic;
ext_rst_in : in std_ulogic;

pll_rst_out : out std_ulogic;
rst_out : out std_ulogic
);
end soc_reset;

architecture rtl of soc_reset is
signal ext_rst_n : std_ulogic;
signal rst_n : std_ulogic;
signal pll_rst_reg : std_ulogic_vector(PLL_RESET_CLOCKS downto 0) := (others => '1');
signal soc_rst_reg : std_ulogic_vector(SOC_RESET_CLOCKS downto 0) := (others => '1');
begin
ext_rst_n <= ext_rst_in when RESET_LOW else not ext_rst_in;
rst_n <= ext_rst_n and pll_locked_in;

-- PLL reset is active high
pll_rst_out <= pll_rst_reg(0);
-- Pass active high reset around
rst_out <= soc_rst_reg(0);

-- Wait for external clock to become stable before starting the PLL
-- By the time the FPGA has been loaded the clock should be well and
-- truly stable, but lets give it a few cycles to be sure.
pll_reset_0 : process(ext_clk)
begin
if (rising_edge(ext_clk)) then
pll_rst_reg <= '0' & pll_rst_reg(pll_rst_reg'length-1 downto 1);
end if;
end process;

-- Once our clock is stable and the external reset button isn't being
-- pressed, assert the SOC reset for long enough for the CPU pipeline
-- to clear completely.
soc_reset_0 : process(pll_clk)
begin
if (rising_edge(pll_clk)) then
if (rst_n = '0') then
soc_rst_reg <= (others => '1');
else
soc_rst_reg <= '0' & soc_rst_reg(soc_rst_reg'length-1 downto 1);
end if;
end if;
end process;
end rtl;

@ -0,0 +1,106 @@
library ieee;
use ieee.std_logic_1164.all;

entity soc_reset_tb is
end soc_reset_tb;

architecture behave of soc_reset_tb is
signal ext_clk : std_ulogic;
signal pll_clk : std_ulogic;

signal pll_locked_in : std_ulogic;
signal ext_rst_in : std_ulogic;

signal pll_rst_out : std_ulogic;
signal pll_rst_out_expected : std_ulogic;
signal rst_out : std_ulogic;
signal rst_out_expected : std_ulogic;

constant clk_period : time := 10 ns;

type test_vector is record
pll_locked_in : std_ulogic;
ext_rst_in : std_ulogic;
pll_rst_out : std_ulogic;
rst_out : std_ulogic;
end record;

type test_vector_array is array (natural range <>) of test_vector;
constant test_vectors : test_vector_array := (
-- PLL not locked, reset button not pressed
('0', '1', '1', '1'),
('0', '1', '1', '1'),
('0', '1', '1', '1'),
('0', '1', '1', '1'),
-- Reset is removed from the PLL
('0', '1', '0', '1'),
('0', '1', '0', '1'),
('0', '1', '0', '1'),
-- At some point PLL comes out of reset
('1', '1', '0', '1'),
('1', '1', '0', '1'),
('1', '1', '0', '1'),
('1', '1', '0', '1'),
-- Finally SOC comes out of reset
('1', '1', '0', '0'),
('1', '1', '0', '0'),

-- PLL locked, reset button pressed
('1', '0', '0', '1'),
('1', '0', '0', '1'),
('1', '0', '0', '1'),
-- PLL locked, reset button released
('1', '1', '0', '1'),
('1', '1', '0', '1'),
('1', '1', '0', '1'),
-- Finally SOC comes out of reset
('1', '1', '0', '0')
);
begin
soc_reset_0: entity work.soc_reset
generic map (
PLL_RESET_CLOCKS => 4,
SOC_RESET_CLOCKS => 4,
RESET_LOW => true
)
port map (
ext_clk => ext_clk,
pll_clk => pll_clk,
pll_locked_in => pll_locked_in,
ext_rst_in => ext_rst_in,
pll_rst_out => pll_rst_out,
rst_out => rst_out
);

clock: process
begin
ext_clk <= '0';
pll_clk <= '0';
wait for clk_period/2;
ext_clk <= '1';
pll_clk <= '1';
wait for clk_period/2;
end process clock;

stim: process
begin
for i in test_vectors'range loop
(pll_locked_in, ext_rst_in, pll_rst_out_expected, rst_out_expected) <= test_vectors(i);

--report "pll_locked_in " & std_ulogic'image(pll_locked_in);
--report "ext_rst_in " & std_ulogic'image(ext_rst_in);
--report "pll_rst_out " & std_ulogic'image(pll_rst_out);
--report "rst_out" & std_ulogic'image(rst_out);

assert pll_rst_out_expected = pll_rst_out report "pll_rst_out bad";
assert rst_out_expected = rst_out report "rst_out bad";

wait for clk_period;
end loop;

wait for clk_period;

assert false report "end of test" severity failure;
wait;
end process;
end behave;

@ -14,7 +14,9 @@ use work.wishbone_types.all;
entity toplevel is entity toplevel is
generic ( generic (
MEMORY_SIZE : positive := 524288; MEMORY_SIZE : positive := 524288;
RAM_INIT_FILE : string := "firmware.hex"); RAM_INIT_FILE : string := "firmware.hex";
RESET_LOW : boolean := true
);
port( port(
ext_clk : in std_logic; ext_clk : in std_logic;
ext_rst : in std_logic; ext_rst : in std_logic;
@ -28,12 +30,12 @@ end entity toplevel;
architecture behaviour of toplevel is architecture behaviour of toplevel is


-- Reset signals: -- Reset signals:
signal rst : std_logic; signal rst : std_ulogic;
signal pll_rst_n : std_ulogic;


-- Internal clock signals: -- Internal clock signals:
signal system_clk : std_logic; signal system_clk : std_ulogic;
signal timer_clk : std_logic; signal system_clk_locked : std_ulogic;
signal system_clk_locked : std_logic;


-- wishbone signals: -- wishbone signals:
signal wishbone_proc_out: wishbone_master_out; signal wishbone_proc_out: wishbone_master_out;
@ -137,21 +139,25 @@ begin
end case; end case;
end process processor_intercon; end process processor_intercon;


reset_controller: entity work.pp_soc_reset reset_controller: entity work.soc_reset
generic map(
RESET_LOW => RESET_LOW
)
port map( port map(
clk => system_clk, ext_clk => ext_clk,
reset_n => ext_rst, pll_clk => system_clk,
reset_out => rst, pll_locked_in => system_clk_locked,
system_clk => system_clk, ext_rst_in => ext_rst,
system_clk_locked => system_clk_locked pll_rst_out => pll_rst_n,
rst_out => rst
); );


clkgen: entity work.clock_generator clkgen: entity work.clock_generator
port map( port map(
clk => ext_clk, ext_clk => ext_clk,
resetn => ext_rst, pll_rst_in => pll_rst_n,
system_clk => system_clk, pll_clk_out => system_clk,
locked => system_clk_locked pll_locked_out => system_clk_locked
); );


processor: entity work.core processor: entity work.core

@ -33,7 +33,7 @@ filesets:
files: files:
- fpga/pp_fifo.vhd - fpga/pp_fifo.vhd
- fpga/pp_soc_memory.vhd - fpga/pp_soc_memory.vhd
- fpga/pp_soc_reset.vhd - fpga/soc_reset.vhdl
- fpga/pp_soc_uart.vhd - fpga/pp_soc_uart.vhd
- fpga/pp_utilities.vhd - fpga/pp_utilities.vhd
- fpga/toplevel.vhd - fpga/toplevel.vhd

Loading…
Cancel
Save